National Aluminium Company Limited-NALCO has published Development Of Consultant Office Building At 1St Floor Of Training Centre Workshop For 5Th Stream Expansion Project In Alumina Refinery , Nalco , Damonjodi . . Submission Date for this Tender is 03-09-2020. Building Work Tenders in NALCO,DAMANJODI Odisha. Bidders can get complete Tender details and download the document.
| Name of Work: DEVELOPMENT OF CONSULTANT OFFICE BUILDING AT 1ST FLOOR OF TRAINING CENTRE WORKSHOP FOR 5TH STREAM EXPANSION PROJECT IN ALUMINA REFINERY, NALCO, DAMONJODI. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item No. and Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | 1) Transporting the following building/ road materials and other materials of approved quality including loading ,unloading ,stacking and spreading of the same as directed by the Engineer-In-Charge. (The rate will be applicable to net quantities after deduction of prescribed percentage for voids mentioned in the specification under prescribed carriage of materials by mechanical transport). The lead upto 3.0KM in inside/outside Plant etc,all complete as per direction of EIC. | |||
| 2 | 2 | 1.1) Building rubbish/mulba/waste material/ or any other serviceable/unserviceable material | 100 | Cum | |
| 3 | 3 | 1.2) Earth | 20 | Cum | |
| 4 | 4 | 1.3) Steel structure like Angle/Channel/Beam/CGI Sheet/PPGL/PGI/AC/Translucent sheets etc. | 40 | MT | |
| 5 | 5 | 2) Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering for all depths etc. all complete as directed by EIC. | 5 | Cum | |
| 6 | 6 | 3) Supplying and filling in plinth with sand of Nowrangapur varierty under floors , roads, foundations etc including watering, ramming consolidating and dressing complete etc. All complete as direction of EIC. | 2 | Cum | |
| 7 | 7 | 4) Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil etc, all complete as per direction of EIC | |||
| 8 | 8 | 4.1) All kinds of soil upto all depth | 5 | Cum | |
| 9 | 9 | 5) Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level etc all complete. ( Cement will be supplied free of cost by NALCO at it's store point.) | |||
| 10 | 10 | 5.1) 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) | 100 | Cum | |
| 11 | 11 | 6) Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level and at ground level etc all complete. ( Cement will be supplied free of cost by NALCO at it's store point.) | |||
| 12 | 12 | 6.1) 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | 5 | Cum | |
| 13 | 13 | 7) Centering and shuttering including strutting, propping etc. and removal of form for : up to all height etc. all complete as per direction of EIC. | |||
| 14 | 14 | 7.1) Foundations, footings, bases of columns, tie beam,Pcc for floor at ground level etc. for mass concrete etc. all complete as per direction of EIC. | 50 | Sqm | |
| 15 | 15 | 7.2) Suspended floors, roofs, landings, stair,wall,balconies ,beams and access platform etc. all complete as per direction of EIC. | 20 | Sqm | |
| 16 | 16 | 8) Providing ,hoisting and fixing up to floor five level precast reinforcement cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases,lintel etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required centering complete. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)etc. all complete as per direction of EIC. ( Cement will be supplied free of cost by NALCO at it's store point) | 1 | Cum | |
| 17 | 17 | 9) Transporting, Bending/binding and placing in position high yield deformed bars reinforcement or cold twisted deformed bars reinforcement for RCC Work inluding straightening,cutting,bending, placing in position and binding at all height and depths, taking the same from store issue points to site of work, straightening, bending to required shape and lenghts as per details, including supplying and binding contractors own soft annealed binding wire and placing with proper cover blocks, supports, chairs, spacers and return of unused /scrap/unserviceable steel to owners storage point etc all complete. (Reinforcement Steel shall be issued free of cost at NALCO store point) | |||
| 18 | 18 | 9.1) Cold twisted bars/Hot rolled deformed bars | 1000 | Kg | |
| 19 | 19 | 10) Brick work with Fly ash bricks in foundations, walls etc upto all height etc. all complete as per direction of EIC.( Cement & Fly Ash Bricks will be supplied free of cost by NALCO at it's store point.) | |||
| 20 | 20 | 10.1) Cement mortar 1:6 (1 cement : 6 coarse sand) | 20 | Cum | |
| 21 | 21 | 11) Half brick masonry with Fly ash brick in superstructure above plinth level up to floor V level etc. all complete as per direction of EIC.Cement mortar 1:4 (1 cement :4 coarse sand) ( Cement & Fly Ash Bricks will be supplied free of cost by NALCO at it's store point.) | 50 | Sqm | |
| 22 | 22 | 12) Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills ,urinal partition wash basin platform facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels( Cement will be supplied free of cost by NALCO at it's store point.) Granite of specified colour and approved quality as per direction of E-I-C. ( Cement will be supplied free of cost by NALCO at it's store point) | |||
| 23 | 23 | 12.1) Area of slab upto 0.50 sqm | 6 | Sqm | |
| 24 | 24 | 12.2) Area of slab over 0.50 sqm | 3 | Sqm | |
| 25 | 25 | 13) Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. all complete as per direction of EIC. | 2 | Each | |
| 26 | 26 | 14) Providing and fixing aluminium sliding door bolts/Aldrop bolt ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. all complete as per direction of EIC. Size-300x16 mm | 10 | Each | |
| 27 | 27 | 15) Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. all complete as per direction of EIC. Size- 200x10 mm | 10 | Each | |
| 28 | 28 | 16) Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. all complete as per direction of EIC. Size-125 mm | 10 | Each | |
| 29 | 29 | 17) Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete : Twin rubber stopper etc. all complete as per direction of EIC. | 20 | Each | |
| 30 | 30 | 18) Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. all complete as per direction of EIC. | 5 | Each | |
| 31 | 31 | 19) Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of EIC. | 10 | RM | |
| 32 | 32 | 20) Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. | |||
| 33 | 33 | 20.1) 30 mm thick plain PVC door shutters | 8 | Sqm | |
| 34 | 34 | 21) Supply, fabrication and Erection of structural steel work riveted, bolted or welded in built up sections, trusses and framed work, stair case ,window grill(roundbar/square/rectangular any other desgin)roof or any other work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per direction of EIC. | 2200 | Kg. | |
| 35 | 35 | 22) Providing and fixing stainless steel for stair case and other structural platform ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of EIC. | 300 | Kg | |
| 36 | 36 | 23) Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. all complete as per direction of EIC. ( Cement will be supplied free of cost by NALCO at it's store point.) | |||
| 37 | 37 | 23.1) 40mm thick with 20mm nominal size stone aggregate | 20 | Sqm | |
| 38 | 38 | 24) Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)etc. All complete As per direction of EIC. Medium shade pigment using 50% white cement 50% Grey cement White Cement should be provided by contractor (Only Grey Cement will be supplied free of cost by NALCO at it's store point.) \n | 550 | Sqm | |
| 39 | 39 | 25) Providing & laying in level and line 20mm thick Kota stone of approved quality of minimum size 450x450mm of uniform colour & texture with necessary dressing in floors/stair case riser and treads/skirting laid on 25mm thick cement mortar bed 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing all complete as per direction of E-I-C | 10 | Sqm | |
| 40 | 40 | 26) Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,platforms, skirting,toilet walls etc.,laid on bed of over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.as per direction of E-I-C.( Cement will be supplied free of cost by NALCO at it's store point.)\n | 50 | Sqm | |
| 41 | 41 | 27) Providing and laying Vitrified Tiles/anti-skid tiles in different sizes (thickness to be specified by manufacturer as applicable antiskid as directed by EIC), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in floors,skirting, riser of steps, stair,over 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.as per direction of E-I-C. Size of Tile 600x600 mm ( Cement will be supplied free of cost by NALCO at it's store point ) | 825 | Sqm | |
| 42 | 42 | 28) Supply and Erection of precoated galvanised iron profile sheets upto all height for roof (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. all complete as per direction of EIC.\n | 1050 | Sqm | |
| 43 | 43 | 29) Providing & Fixing of Luxalon GI Lay In Type Microperforated with Acoustic Tile False Ceiling as manufactured by Hunter Douglas India Pvt Ltd in Cotton White color (as per Luxalon Color Chart). Tiles shall be placed on 24mm ‘T’ framework to form modules of 600mm x 600mm. The visible/exposed area of the tiles shall be of size 575mm long & 575mm wide with bevel edge & made from 0.5mm thick GI. The Micro Perforated tiles shall have 1.5mm diameter perforation holes in a diagonal square pattern giving 22% open area with factory applied Acoustic non woven polyester fabric (NWT) at the inside surface of the tile. Tiles shall be Coil Coated, stove enameled on a continuous paint line for pre treatment. The coils shall go through 4 stages of pretreatment, 3 times oven baked through conversion coating. Priming & finish coat should ensure superior adhesion, high corrosion resistance & good color stability. The coils should be painted on both surfaces after degreasing. Inside surface should have primer coating of 5 microns & natural color coating of 5 microns. The exposed surface should have primer coating of 5 microns, binder of 5 microns & top coat of 15 microns. The tiles shall be manufactured on advance equipment which includes several stages of leveling. The tile edges shall be raised upward by 10mm and bent outward to lay the tile in framework. Grid System shall comprise of TEES. The 24mm main tees shall be suspended at an interval of 1200mm c/c. The 24mm cross tee runner shall be suspended at 600mm c/c with interlocking arrangements to form grids of 600mm x 600mm. The main tee shall be supported by means of 4mm diameter GI rods & butterfly clip (level adjusters) from the RCC slab. Wherever the panel meets the wall, suitable ‘L’ & ‘W’ wall profiles made from GI/Aluminium in similar color shall be used etc.all complete as per direction of EIC | 810 | Sqm | |
| 44 | 44 | 30) 12 mm cement plaster on the rough side of single or half brick wall of mix : ( Cement will be supplied free of cost by NALCO at it's store point.) | |||
| 45 | 45 | 30.1) 1:6 (1 cement : 6 fine sand) | 400 | Sqm | |
| 46 | 46 | 31) 15 mm cement plaster on the rough side of single or half brick wall of mix : ( Cement will be supplied free of cost by NALCO at it's store point.) | |||
| 47 | 47 | 31.1) 1:6 (1 cement : 6 fine sand) | 100 | Sqm | |
| 48 | 48 | 32) Distempering with oil bound washable distemper Two more coat in walls, ceiling etc. of approved brand and manufacture on old/new work with over and inlcuding priming coat with cement primer with approved shade to give an even shade complete as per manufacture specification. Area must be cleaned off spilled paints etc. after completion of painting works. | 500 | Sqm | |
| 49 | 49 | 33) Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives of required shade : | |||
| 50 | 50 | 33.1) New work (Two or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied\n@ 2.20 kg/ 10 sqm)\n | 500 | Sqm | |
| 51 | 51 | 34) With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works | 50 | Sqm | |
| 52 | 52 | 35) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | |||
| 53 | 53 | 35.1) Two or more coats on new work | 50 | Sqm | |
| 54 | 54 | 36) Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete etc.all complete as per direction of EIC\n | 600 | Sqm | |
| 55 | 55 | 37) Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground etc. all complete as per direction of EIC. | |||
| 56 | 56 | 37.1) For door/ window/ clerestory window/ventilator/A.C etc | 60 | Sqm | |
| 57 | 57 | 38) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. all complete as per direction of EIC. | 600 | Sqm | |
| 58 | 58 | 39) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of EIC. | |||
| 59 | 59 | 39.1) Nominal concrete 1:3:6 or richer mix | 5 | Cum | |
| 60 | 60 | 40) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of EIC. | 5 | Cum | |
| 61 | 61 | 41) Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | |||
| 62 | 62 | 41.1) In all cement mortar | 5 | Cum | |
| 63 | 63 | 42) Dismantling doors, windows and clerestory windows/ventilator (steel or wood) rolling shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: | |||
| 64 | 64 | 42.1) Of area 3 sq. metres and below | 2 | Each | |
| 65 | 65 | 42.2) Of area beyond 3 sq. metres | 2 | Each | |
| 66 | 66 | 43) Dismantling steel work in built up sections in angles, tees, stair cases,flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. | 5500 | Kg. | |
| 67 | 67 | 44) Dismantling roofing including ridges, hips, valleys, all sheets and gutters etc., and stacking the material within 1KM lead of : CGI Sheet/PPGL/PGI/AC/Translucent sheets etc. up to all height all complete as per direction of EIC. | 1050 | Sqm | |
| 68 | 68 | 45) Supply and fixing of Heavy duty galvanized chemical anchor fastener of Hilti/ make type HSL 3 or HY 150 or approved equivalent of dia 16mm & approximate length (maximum 300mm long) in concrete to take direct tension of minimum 1.6M ton incuding workmanship drilling cleaning the hole, placing and aligning the fastener, etc all complete as per direction of E-I-C. | 5 | Each | |
| 69 | 69 | 46) Providing and fixing water closet squatting pan (Indian type W.C. pan of Hindware/Perryware or equivalent make as per EIC) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests etc. all complete as per direction of EIC.\n | 1 | Each | |
| 70 | 70 | 47) Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan of Hindware/Perryware or equivalent make as per EIC)) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid etc. all complete as per direction of EIC. | 1 | Each | |
| 71 | 71 | 48) Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings all complete as per direction of EIC. 40 mm dia size | 5 | Each | |
| 72 | 72 | 49) Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bore | 5 | Each | |
| 73 | 73 | 50) Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :100x100 mm size P type etc. all complete as per direction of EIC. | 2 | Each | |
| 74 | 74 | 51) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling complete as per direction of Engineer in Charge. for external work-25 mm dia | 50 | RM | |
| 75 | 75 | 52) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with necessary clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same complete as per direction of Engineer in Charge (Concealed work, including cutting chases and making good the walls etc.. | |||
| 76 | 76 | 52.1) 15 mm nominal outer dia pipe | 50 | RM | |
| 77 | 77 | 52.2) 20 mm nominal outer dia pipe | 40 | RM | |
| 78 | 78 | Providing & fixing Jaguar Make premium quality or equivalent approved make | |||
| 79 | 79 | 53) Providing & fixing Jaguar Make premium quality 5357N Sink cock with Regular swinging spout including all fitting as per the direction of EIC. | 2 | Each | |
| 80 | 80 | 54) Providing & fixing Jaguar Make premium quality(5053N) Angular Stop Cock with Wall Flange including all fitting as per the direction of EIC. | 2 | Each | |
| 81 | 81 | 55) Providing and fixing 2 way-Bib Cock with Wall Flange (5041N)of Jaguar make or approved make with flange as per the direction of Engineer-In-Charge. | 2 | Each | |
| 82 | 82 | 56) Providing and fixing Parry ware cascade wallvit with matching E8300 polypropylene seat cover and all suitable for use fitting with flush valve of sand dume colour with all arrangements of approved quality & colour making the wall good as per the direction of Engineer-In-Charge. | 1 | Each | |
| 83 | 83 | 57) Providing and fixing Metropole flush valve of Jaguar make 1095N flush valve Regular 32 mm size concelad body with exposed shut off provision & Round flange equal approved make complete making the wall good with concealed fittings arrangements of approved quality & colour etc. including all fitting as per the direction of EIC. | 2 | Each | |
| 84 | 84 | 58) Providing and fixing wall mixture of Jaguar make 281&519 with shower arm and wall flange 7489 or equal approved make complete with concealed fittings arrangements of approved quality & colour making the wall good etc.all complete as per the direction of Engineer-In-Charge. | 1 | Each | |
| 85 | 85 | 59) Providing and fixing ALD-573Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hookof Jaguar make or approved make with flange as per the direction of Engineer-In-Charge | 2 | Each | |
| 86 | 86 | 60) Providing and fixing towel ring of Jaguar make 1121N or equal approved make complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality & colour as per the direction of Engineer-In-Charge. | 2 | Each | |
| 87 | 87 | 61) Providing and fixing towel rail of 600mm of Jaguar make 1181FHS or equal approved make complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality & colour as per the direction of Engineer-In-Charge. | 1 | Each | |
| 88 | 88 | 62) Providing & fixing white or color vitreous china flat back half stall urinal of parry ware magnum make or approved quality size 590X400X380 mm with matching color PVC automatic flushing cistern , with fittings, standard size C.P .brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as IS:2556, C.I. trap with outlet grating and couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required with single half stall urinals with 5 litre P.V.C. automatic flushing cistern etc. all complete as per direction of EIC. | 3 | Each | |
| 89 | 89 | 63) Providing & fixing approved make (ONS-WHT-10953BI)Rimless, Blind Installation Wall HungWC with UF soft close slim seat cover,Hinges, Accessories Set,Size : 370x490x365 mm ,quality squatting plate one piece construction white vitreous china squatting plate or approved color with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with incuding all fittings, standard size G.I./PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I. clamps and CP brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. where ever required with single squatting plate with 5 Liter P.V.C. automatic flushing cistern etc. all complete as per the direction of Engineer-In-Charge. | 1 | Each | |
| 90 | 90 | 64) Providing & fixing Parry ware oval wash basin below counter size 550 X 445x200 of sand dume colour or approved equivalent quality with bottle trap European type with all fitting & fixure etc., all complete as per the direction of EIC. | 2 | Each | |
| 91 | 91 | 65) Providing & fixing Kasmiri White Granite slab of 20 mm thick figurative patterns 7'-00" X 2'-06" X 200 thick single piece 17.5 Sq.ft. of approved quality in proper level and height etc., all complete as per the direction of Engineer-In-Charge. | 2 | Each | |
| 92 | 92 | 66) Providing and making hole in the granite slab up to 25 mm thick for fixing of sanitary fittings like oval wash basin & pillar cock etc., without breaking the original stone used for plat form as per the direction of Engineer-In-Charge | 1 | Each | |
| 93 | 93 | 67) Providing and making the stone edge rounding as per direction of Engineer-In-Charge with all tool & tackle. | 10 | RM | |
| 94 | 94 | 68) Providing and fixing approved make mirror of size 1800 X 750 mm of superior glass ( of approved quality) and of required shape & size with plastic moulded frame of approved make or suitable approved frame and shade with 6 mm thick hard board baking ground fixed to wooden cleats with C.P. brass screws and washers all complete as per direction of EIC. | 2 | Each | |
| 95 | 95 | 69) Providing and fixing Shower basket small Jaguar model 1177N or equivalent approved make with all fitting & fixure as per the direction of Engineer-In-Charge. | 2 | Each | |
| 96 | 96 | 70) Providing and fixing liquid soap container Jaguar make model no. 1137N or equivalent approved make of standard shape with bracket of same materials with snap fittings of approved quality and colour all complete as per the direction of EIC. | 1 | Each | |
| 97 | 97 | 71) Providing and placing of 1000 liter capacity on terrace (at all floor levels) polyethylene water storage tank ISI:12710 marked, with cover and suitable locking arrangement and necessary holes for inlet, out let and over flow pipes with all fittings required float valve, float , stop cocks in inlet , out let & over flow including testing the connection etc. all complete as per the direction of EIC. | 2 | Each | |
| 98 | 98 | 72) Providing and fixing Squatting pan of approved make & size for sanitary installation etc. all complete as per the direction of EIC | 1 | Each | |
| 99 | 99 | 73) Providing & placing 100 mm dia approved PVC pipe for sanitary installation with necessary plain bend, door bend, plain TEE, Door Tee, socket etc all complete as per the site requirement and direction of Engineer-In-Charge. | 30 | RM | |
| 100 | 100 | 74) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections in one way/two way/three way sliding type appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of EIC | |||
| 101 | 101 | 74.1) For fixed portion : Powder coated aluminum (minimum thickness of powder coating 50 micron) | 3400 | Kg | |
| 102 | 102 | 74.2) For Moveable portion : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Power coated aluminum (minimum thickness of powder coating 50 micron) | 700 | Kg | |
| 103 | 103 | 75) Providing and fixing 12mm thick prelaminated three layer medium density (exterior grade) particle board Grade I, Type II conforming to IS : 12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. (Prelaminated particle board with decorative lamination on both sides.) | 750 | Sqm | |
| 104 | 104 | 76) Providing and fixing Aluminum glazing work door,window,ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per architectural drawings and directions of Engineer-in-charge (Cost of aluminum snab beading shall be in basic item) With float glass panes of 5.50 mm thickness | 450 | Sqm | |
| 105 | 105 | 77) Providing & fixing Jaguar make urinal auto closing system with built in control cock & wall flange approved make complete making the wall good with concealed fittings arrangements of approved quality & colour etc. including all fitting as per the direction of EIC. | 3 | Each | |
| 106 | 106 | 78) Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness | 5 | Each | |
| 107 | 107 | 79) Providing and fixing aluminium round shape Anodized Aluminium handle of outer size 100mm with SS screws etc. complete as per direction of engineerin-charge . Polyester powder coated mini thickness 50 micron aluminium | 10 | Each | |
| 108 | 108 | 80) Providing & fixing Jaguar Make premium quality toilet roll holder with stainless steel Flap including all fitting as per the direction of EIC. | 1 | Each | |
| 109 | 109 | 81) Providing and fixing 1083 Elbow set size 32mm Adjustable sleeve & wall Flange of jaguar make or equal approved make complete making the wall good with concealed fittings arrangements of approved quality & colour etc.all complete as per the direction of Engineer-In-Charge. | 2 | Each | |
| 110 | 110 | 82) Providing and fixing ALD-727 Click clack waste 32mm size full thread with 80mm heigh tof Jaguar make or approved make with flange etc.all complete as per the direction of EIC. | 2 | Each | |
| 111 | 111 | 83) Dismantling of all tiles/marble/kota stone/granite of all thickness in floor,wall and roof laid in all cement motar including stacking material within 100 meters lead erc. All complete as per direction of EIC. | 100 | Sqm | |
| 112 | 112 | 84) Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all complete as per direction of EIC. | 5 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
