Repair Of Upswc Godowns At Bhansaria ( Lakhimpur Khiri ) Repair Of Upswc Godowns At Bhansaria ( Lakhimpur Khiri ) , Bhansaria (Lakhimpur Khiri)-Uttar Pradesh

TDR : 25164949

Tender Notice
BOQ

Expired

Bhansaria (Lakhimpur Khiri) , Uttar Pradesh

Tender Brief : Repair Of Upswc Godowns At Bhansaria ( Lakhimpur Khiri ) Repair Of Upswc Godowns At Bhansaria ( Lakhimpur Khiri )

Document Fees
₹ 1180 /-

EMD
₹ 170500.0 /-

Tender Value
₹ 85.20 Lakhs /-

Submission Date
31-08-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Office Repair & Construction of 1st Floor & Godown Repair Work at Bhansaria(Lakhimpur Khiri )
1	1	Office Repair & Construction of 1st Floor	BI01010001010000000000000515BI0100001150
2	2	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.	BI01010001010000000000000515BI0100001151	35.03	cum
3	3	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)	BI01010001010000000000000515BI0100001152	19.49	cum
4	4	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001153	33.83	cum
5	5	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001154	87.27	cum
6	6	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).	BI01010001010000000000000515BI0100001155	37.92	cum
7	7	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Cold twisted bars	BI01010001010000000000000515BI0100001156	4762.75	Kg
8	8	Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers	BI01010001010000000000000515BI0100001157	72.92	sqm
9	9	Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform	BI01010001010000000000000515BI0100001158	252.93	sqm
10	10	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.	BI01010001010000000000000515BI0100001159	17.515	cum
11	11	Supplying and stacking at site good earth (exculding rock) and filling in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering, lead up to 50m and lift up to 1.5 m,	BI01010001010000000000000515BI0100001160	21.525	Cum
12	12	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate	BI01010001010000000000000515BI0100001161	347.95	sqm
13	13	Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick	BI01010001010000000000000515BI0100001162	209.32	metre
14	14	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.	BI01010001010000000000000515BI0100001163	64.29	sqm
15	15	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.	BI01010001010000000000000515BI0100001164	29.58	sqm
16	16	Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	BI01010001010000000000000515BI0100001165	151.59	kg
17	17	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding	BI01010001010000000000000515BI0100001166	1008	kg
18	18	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001167	468	kg
19	19	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws	BI01010001010000000000000515BI0100001168	15.6	sqm
20	20	12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)	BI01010001010000000000000515BI0100001169	951.33	sqm
21	21	Wire mesh (rabbit)	BI01010001010000000000000515BI0100001170	204.24	sqm
22	22	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer	BI01010001010000000000000515BI0100001171	598.39	sqm
23	23	Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.	BI01010001010000000000000515BI0100001172	525.86	sqm
24	24	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work	BI01010001010000000000000515BI0100001173	76.56	sqm
25	25	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes	BI01010001010000000000000515BI0100001174	30.24	sqm
26	26	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.	BI01010001010000000000000515BI0100001175	40.9	sqm
27	27	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001176	20	metre
28	28	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes	BI01010001010000000000000515BI0100001177	20	metre
29	29	Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.	BI01010001010000000000000515BI0100001178	500	per litre
30	30	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests	BI01010001010000000000000515BI0100001179	3	each
31	31	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap	BI01010001010000000000000515BI0100001180	1	each
32	32	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.	BI01010001010000000000000515BI0100001181	1	each
33	33	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore	BI01010001010000000000000515BI0100001182	4	each
34	34	Providing and fixing brass stop cock of approved quality :20 mm nominal bore	BI01010001010000000000000515BI0100001183	2	each
35	35	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter	BI01010001010000000000000515BI0100001184	27	metre
36	36	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler 110 mm	BI01010001010000000000000515BI0100001185	4	each
37	37	Supplying and Fixing Electric pipe.	BI01010001010000000000000515BI0100001186	60.4	metre
38	38	Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.	BI01010001010000000000000515BI0100001187	8	each
39	39	Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.	BI01010001010000000000000515BI0100001188	33.75	sqm
40	40	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete	BI01010001010000000000000515BI0100001189	308.06	sqm
41	41	Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)	BI01010001010000000000000515BI0100001190	266.05	sqm
42	42	Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coats) applied @ 1.82 ltr/10 sqm.	BI01010001010000000000000515BI0100001191	120.16	sqm
43	43	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work	BI01010001010000000000000515BI0100001192	33.36	sqm
44	44	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.	BI01010001010000000000000515BI0100001193	7.09	cum
45	45	15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.	BI01010001010000000000000515BI0100001194	19.4	sqm
46	46	Godown Repair Work	BI01010001010000000000000515BI0100001195
47	47	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In lime mortar	BI01010001010000000000000515BI0100001196	52.64	cum
48	48	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	BI01010001010000000000000515BI0100001197	4000	kg
49	49	Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length andjointed together at the end by end locks, mounted on specially designedpipe shaft with brackets, side guides and arrangements for inside andoutside locking with push and pull operation complete, including thecost of providing and fixing necessary 27.5 cm long wire springsmanufactured from high tensile steel wire of adequate strengthconforming to IS: 4454 - part 1 and M.S. top cover of required thicknessfor rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover	BI01010001010000000000000515BI0100001198	184.08	sqm
50	50	Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).	BI01010001010000000000000515BI0100001199	130.56	sqm
51	51	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work	BI01010001010000000000000515BI0100001200	706.8	sqm
52	52	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)	BI01010001010000000000000515BI0100001201	14.81	cum
53	53	Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:Asbestos cement sheet	BI01010001010000000000000515BI0100001202	4578.51	sqm
54	54	Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking.	BI01010001010000000000000515BI0100001203	1521.2	kg
55	55	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	BI01010001010000000000000515BI0100001204	4451.27	sqm
56	56	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)	BI01010001010000000000000515BI0100001205	97.65	metre
57	57	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)	BI01010001010000000000000515BI0100001206	51.02	cum
58	58	12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)	BI01010001010000000000000515BI0100001207	631.48	sqm
59	59	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.	BI01010001010000000000000515BI0100001208	243.39	sqm
60	60	Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):From brick work in lime mortar	BI01010001010000000000000515BI0100001209	11.017	1000 Nos
61	61	White washing with lime to give an even shade : New work (three or more coats)	BI01010001010000000000000515BI0100001210	356.7	sqm
62	62	Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)	BI01010001010000000000000515BI0100001211	725.24	sqm
63	63	Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand.	BI01010001010000000000000515BI0100001212	651	metre
64	64	INTERNAL ELECTRICAL WORK FOR OFFICE	BI01010001010000000000000515BI0100001213
65	65	POINT WIRING	BI01010001010000000000000515BI0100001214
66	66	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B	BI01010001010000000000000515BI0100001215	16	Point
67	67	Supply & Fixing of LED Light with batten suitable for up to 1x22 watt LED Tube light fitting including tube on surface complete in all respect CAT AAAA.	BI01010001010000000000000515BI0100001216	16	Each
68	68	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.	BI01010001010000000000000515BI0100001217	6	Each
69	69	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.	BI01010001010000000000000515BI0100001218	6	Each
70	70	Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.	BI01010001010000000000000515BI0100001219	3	Each
71	71	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.	BI01010001010000000000000515BI0100001220	3	Each
72	72	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire	BI01010001010000000000000515BI0100001221	40	Metre
73	73	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire	BI01010001010000000000000515BI0100001222	35	Metre
74	74	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire	BI01010001010000000000000515BI0100001223	20	Metre
75	75	DISTRIBUTION BOARDS,MCB'S & ISOLATORS:	BI01010001010000000000000515BI0100001224
76	76	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)2+6 way, Double door	BI01010001010000000000000515BI0100001225	1	Each
77	77	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door	BI01010001010000000000000515BI0100001226	1	Each
78	78	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.	BI01010001010000000000000515BI0100001227	12	Each
79	79	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.	BI01010001010000000000000515BI0100001228	1	Each
80	80	Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.	BI01010001010000000000000515BI0100001229	10	Each
81	81	Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A	BI01010001010000000000000515BI0100001230	1	Each
82	82	EARTHING	BI01010001010000000000000515BI0100001231
83	83	Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.	BI01010001010000000000000515BI0100001232	1	Each
84	84	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)	BI01010001010000000000000515BI0100001233	25	Metre
85	85	Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.	BI01010001010000000000000515BI0100001234	50	Metre
86	86	INSTALLATION OF LIGHT FIXTURES :	BI01010001010000000000000515BI0100001235
87	87	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.	BI01010001010000000000000515BI0100001236	16	Each
88	88	INSTALLATION OF FANS AND EXHAUST FANS :	BI01010001010000000000000515BI0100001237
89	89	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.	BI01010001010000000000000515BI0100001238	3	Each
90	90	Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep	BI01010001010000000000000515BI0100001239	2	Each
91	91	Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.	BI01010001010000000000000515BI0100001240	2	Each
92	92	Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 100 mm dia	BI01010001010000000000000515BI0100001241	5	Metre
93	93	LAYING AND TERMINATION OF CABLE:	BI01010001010000000000000515BI0100001242
94	94	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. Mm	BI01010001010000000000000515BI0100001243	20	Metre
95	95	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)	BI01010001010000000000000515BI0100001244	2	each
96	96	SUPPLY OF FANS AND EXHAUST FANS :	BI01010001010000000000000515BI0100001245
97	97	Supply and erection of AC 1200mm Swep,230/250 Volts,50Hz ceilling fan with regulater standar down rod,blades including connection etc,complete as requiredMake:CG/Usha/Bajaj/Equivalent Make	BI01010001010000000000000515BI0100001246	2	each
98	98	Supply of AC 230/250 Volts,50Hz exhaust fans including providing nuts,bolts, mounting frame and other accessories including connections etc complete as required-Make: USHA cat No. TURBO JET DLX 300mm sweep.	BI01010001010000000000000515BI0100001247	2	each

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Building Construction Tenders

Godown Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Repair Of Upswc Godowns At Bhansaria ( Lakhimpur Khiri ) Repair Of Upswc Godowns At Bhansaria ( Lakhimpur Khiri ) , Bhansaria (Lakhimpur Khiri)-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Repair Of Upswc Godowns At Bhansaria ( Lakhimpur Khiri ) Repair Of Upswc Godowns At Bhansaria ( Lakhimpur Khiri ) , Bhansaria (Lakhimpur Khiri)-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us