| 1 | 1 | Dismantaling corrugated iron roofs, wall or partotion including purlins, battens and vertical support and including stacking of material as directed by the Engineer-in-Charge with in a distance of 60 metre. SI No.701 | BI01010001010000000000000515BI0100001112 | 242 | sqm |
|---|
| 2 | 2 | Excavation in foundation in soil mixed with moorum, shingle, kankarr requiring the use of special tools and plant such as pickaxes, sabbles etc. (where machine can not move) including lift upto 1.50 and lead upto 30M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge upto a distance of 30M from the foundation trenches. (SI No. 252) | BI01010001010000000000000515BI0100001113 | 125 | Cum |
|---|
| 3 | 3 | Earthwork in cutting or in embankment in ordinary soil, excavation to be done from regular pits not exceeding 1/2 M. in depth and work embankment to be in 20 cm layer including ramming and dressing the surface to required levels and slopes and also including 1.5M lifts and lead up to 5 km . The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30M distance as directed by the Engineer-in-charge. | BI01010001010000000000000515BI0100001114 | 146 | Cum |
|---|
| 4 | 4 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8Kms. from the site of work and i/c watering, dressing etc, labour and T&P etc. required for the proper completion of the work. saplings of girth up to 30cms. measured at a height of 1M. above ground level and removes of rubbish up to a distance of 50M. out side the periphery of area cleared. SI.No. 255(a) | BI01010001010000000000000515BI0100001115 | 146 | Cum |
|---|
| 5 | 5 | Concrete with 4cm. gauge stone ballast, coarse sand of 2.20 F.M and cement in proportion of 8:4:1 in foundation and under floors, including supply of all materials, labour, T&P etc. required for proper completion of the work. | BI01010001010000000000000515BI0100001116 | 11 | Cum |
|---|
| 6 | 6 | RCC work with cement, approved Coarse sand and 20mm stone grit in proportion of 1:1.5:3 in raft foundation and footings excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work, including cost of binding wire. | BI01010001010000000000000515BI0100001117 | 39 | Cum |
|---|
| 7 | 7 | FOOTING- | BI01010001010000000000000515BI0100001118 | | |
|---|
| 8 | 8 | M.S (Tor steel or plain) work in plain work such as RCC or RB work including bending for proper shape and including supply of steel and its wastage, bend, hooks and authorized over lapping shall be measured and including cost of binding wire (S.I No. 504) | BI01010001010000000000000515BI0100001119 | 43 | Qtl |
|---|
| 9 | 9 | M-150 brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all material, labour T&P etc. required for proper completion of the work as per direction of the work as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001120 | 13 | Cum |
|---|
| 10 | 10 | RCC work with cement, approved Coarse sand and 20mm stone grit in proportion of 1:1.5:3 excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work, including cost of binding wire. | BI01010001010000000000000515BI0100001121 | | |
|---|
| 11 | 10.01 | (A)Column Work | BI01010001010000000000000515BI0100001122 | 9 | Cum |
|---|
| 12 | 10.02 | (B) For Lighter Beam | BI01010001010000000000000515BI0100001123 | 27 | Cum |
|---|
| 13 | 10.03 | (C) For Roof Slab | BI01010001010000000000000515BI0100001124 | 31 | Cum |
|---|
| 14 | 10.04 | (D) For lintels and Sun Shade (R.C.C. mix 1:1.5:3) | BI01010001010000000000000515BI0100001125 | 1 | Cum |
|---|
| 15 | 11 | M.S (Tor steel or plain) work in plain work such as RCC or RB work including bending for proper shape and including supply of steel and its wastage, bend, hooks and authorized over lapping shall be measured and including cost of binding wire (Based on S.I No. 504) | BI01010001010000000000000515BI0100001126 | 81 | Qtl |
|---|
| 16 | 12 | M-150 class brick work in 1:6 cement and fine sand of 1.25 fineness modulus mortar in super structure for one brick thick wall including supply of all material, labour, T&P etc. required for proper completion of the work as per direction of Engineer-in-charge. (SI.No. 303+309+310) | BI01010001010000000000000515BI0100001127 | 10 | Cum |
|---|
| 17 | 13 | M-150 class brick work in 1:4 cement and approved coarse sand of 2.20 fineness modulus mortar in super structure for half brick thick wall including supply of all material, labour, T&P etc. required for proper completion of the work as per direction of Engineer-in-charge. (SI.No. 305a+309+310a) | BI01010001010000000000000515BI0100001128 | 14 | Cum |
|---|
| 18 | 14 | M.S. or iron work in MS Grills/ Stair case railings/ gates/ racks etc. wrought to required form including supply of steel bolts, nuts, wastage etc and their fixing required for proper completion of the work. [SI No.502(A)] | BI01010001010000000000000515BI0100001129 | 1.5 | Qtl |
|---|
| 19 | 15 | M.S. or iron work of small size and section such as Z-SECTION WINDOWS & VENTILATORS OF OPENABLE PANELS excluding glass panes wrought to required form includingc supply of steel bolts, nuts and wastage etc & their fixing required for proper completion of the work. [SI No.502 B-ii] | BI01010001010000000000000515BI0100001130 | 2 | Qtl |
|---|
| 20 | 16 | Cement concrete with 2cm gauge approved stone grit,coarse sand & cement in the proportion of 4:2:1 including supply of all materials,labour,Tools & plants etc.required for proper completion of the work. | BI01010001010000000000000515BI0100001131 | 1 | Cum |
|---|
| 21 | 17 | 12mm thick cement plaster with 1:6 cement and fine sand of 1.25 FM mortar over brick work minimum thickness not to be less than 1cm including supply of all material, labour, tools and plants etc, required for proper completion of the work as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001132 | 486 | Sqm |
|---|
| 22 | 18 | 12mm thick cement plaster with 1:4 cement and fine sand of 1.25 FM mortar over brick work minimum thickness not to be less than 1cm including supply of all material, labour, tools and plants etc, required for proper completion of the work as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001133 | 480 | Sqm |
|---|
| 23 | 19 | Add for extra labour & materials for plaster over rough face of one brick thick wall. (SI No. 596) | BI01010001010000000000000515BI0100001134 | 235 | Sqm |
|---|
| 24 | 20 | Add for extra labour to all items of plaster if done on ceiling. (S.I. No. 587) | BI01010001010000000000000515BI0100001135 | 245 | Sqm |
|---|
| 25 | 21 | Providing and fixing 6 to 8 mm thick ivory or light shades vitrefied floor tiles 600x600 mm size in flooring and skirting over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqmand finished with in its cement colour sullary, jointing and polished of approved quality i/c s/o all material, labour, T&P etc, required for proper completion of the work as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001136 | 255 | Sqm |
|---|
| 26 | 22 | S/F of hexagonal/round GP fan box of approved make made up of 1.0 mm thick ISI marked GP sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box . Holes should be semi shuttered type with 0.5mm GP sheet made upper & lower cover duly screwed fitted with 300mm round zink coated MS bar of 12 mm dia and brand name should be embossed. Fixing with wiring conduit laid in the RCC roof before concreting along with supply of all materials, labour, T & P etc. for proper completiom of work. | BI01010001010000000000000515BI0100001137 | 15 | Nos |
|---|
| 27 | 23 | Providing and applying two coats of wall putty of average thickness 1 mm on new surface with approved quality material of Berger/ Birla or similar brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( 2 Coats) | BI01010001010000000000000515BI0100001138 | 235 | Sqm |
|---|
| 28 | 24 | Finishing wall with weather coat paint of approved make & quality on new work with two coats to given an even shade including supply of all material, labour, tools and plant etc. required for completion of the work. [SI No. new items of Ch-15] | BI01010001010000000000000515BI0100001139 | 235 | Sqm |
|---|
| 29 | 25 | Distempering two coat with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as berger, j&k, shalimar, asian paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, tools & plants etc required for proper completion of the work. SI NO 649+650 | BI01010001010000000000000515BI0100001140 | 486 | Sqm |
|---|
| 30 | 26 | Painting or varnishing work in small areas or new wood/steel work with one coat ready mixed priming paint and two coat or approved superior quality ready mixed paint or varnish including supply of all materials, labour. T&P etc. required for proper completion of the work. Paint to be used should confirm the ISI.No.103-1950. As per SOR. 641+642 | BI01010001010000000000000515BI0100001141 | 43 | sqm |
|---|
| 31 | 27 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | BI01010001010000000000000515BI0100001142 | | |
|---|
| 32 | 27.01 | 21.1.1 For fixed portion | BI01010001010000000000000515BI0100001143 | | |
|---|
| 33 | 27.02 | 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | BI01010001010000000000000515BI0100001144 | 302 | kg |
|---|
| 34 | 28 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:\n9.21.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws free, straight, mitred and jointed mechanically wherever required | BI01010001010000000000000515BI0100001145 | 14 | Sqm |
|---|
| 35 | 29 | Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc.(for estimate purpose only) | BI01010001010000000000000515BI0100001146 | 14 | Sqm |
|---|
| 36 | 30 | Renewing panes of Glass in doors, window & ventilators or fixing in the new work with 4 mm thick Glass panes fixed with breds and putty including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. SI No. 16b + 10% for putty + 10% for labour | BI01010001010000000000000515BI0100001147 | 10 | Sqm |
|---|
| 37 | 31 | Wiring point for light in PVC conduit with 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit conduit partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, GP box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backlite sheet etc. complete in all respect, as directed including matching colour wash. | BI01010001010000000000000515BI0100001148 | 20 | Nos. |
|---|
| 38 | 32 | Wiring point for fan/ fresh air fan (light duty exaust fan) in PVC conduit with 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit conduit partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, GP box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backlite sheet etc. complete in all respect, as directed including matching colour wash. | BI01010001010000000000000515BI0100001149 | 10 | Nos. |
|---|
| 39 | 33 | Wiring point for 5amp plug in PVC conduit with 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit conduit partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, GP box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backlite sheet etc. complete in all respect, as directed including matching colour wash. | BI01010001010000000000000515BI0100001150 | 10 | Nos. |
|---|
| 40 | 34 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.\n | BI01010001010000000000000515BI0100001151 | 5 | Nos. |
|---|
| 41 | 35 | Supply and wiring of 2 nos 2.5 sq.mm. FRLSH but in 25 mm dia heavy duty (2 mm thick) PVC conduit FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable partly concealed in wall & partly laid in slab along with reinforcement before concreting, with two number 14 SWG copperearth continuity wire including matching colour wash etc, complete in all respect \n | BI01010001010000000000000515BI0100001152 | 50 | Rmt. |
|---|
| 42 | 36 | Supply and wiring of submain with 2 nos 4 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in 25 mm dia heavy duty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with two number 14 SWG copper earth continuity wire including matching colour wash etc.complete in all respect\n\n | BI01010001010000000000000515BI0100001153 | 25 | Rmt. |
|---|
| 43 | 37 | Supply and fixing of 6amp to 32 amp SPMCB (10KA) C curve (Cat-B) | BI01010001010000000000000515BI0100001154 | 8 | Each |
|---|
| 44 | 38 | Supply & Fixing surface/Flush mounting 8 ways SPN distribution board without additional metal door without MCB complete in all respect, as direct by Engineer in Charge. (Cat B) | BI01010001010000000000000515BI0100001155 | 1 | Nos. |
|---|
| 45 | 39 | S&F of 40 Amp. S.P. Isolator (Cat B) | BI01010001010000000000000515BI0100001156 | 1 | Nos. |
|---|
| 46 | 40 | Supply and laying of 25 mm dia heavy duty (2mm thick) PVC conduit pipe complete with bends and other acessories as required and 14 SWG fish steel wire etc. in slab and walls alongwith reinforcement before concreting and plastering etc. complete in all respect | BI01010001010000000000000515BI0100001157 | 25 | Rmt |
|---|
| 47 | 41 | Supply and fixing of switch box of 175x100x65 mm size of approved make made up of 1.0 mm thick ISI marked GP sheet, all 4 corners folded and spot welded for screw and holes plugged with PVC nylon caps. Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box, holes should be semi shuttered type and fitted with heavy brass earth piller duly screwed and brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement - sand mortar, including matching colour wash with supply of all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge.\n | BI01010001010000000000000515BI0100001158 | 15 | Nos. |
|---|
| 48 | 42 | Supply and fixing of switch box of 100x100x50 mm size of approved make made up of 1.0 mm thick ISI marked GP sheet, all 4 corners folded and spot welded for screw and holes plugged with PVC nylon caps. Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box, holes should be semi shuttered type and fitted with heavy brass earth piller duly screwed and brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement - sand mortar, including matching colour wash with supply of all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge.\n | BI01010001010000000000000515BI0100001159 | 20 | Nos. |
|---|
| 49 | 43 | 3 mm thick phenolic laminated sheet. | BI01010001010000000000000515BI0100001160 | 4625 | Sqcm |
|---|
| 50 | 44 | Supply and burying of 40mm dia x 4.5 metres long G.I. pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30 cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer in charge complete in all respect as per drawing. | BI01010001010000000000000515BI0100001161 | 1 | Nos. |
|---|
| 51 | 45 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. | BI01010001010000000000000515BI0100001162 | 25 | Rmt |
|---|
