Sales : +91-777 804 8217
| Name of Work: Construction of Auditorium at Dadara in Kamrup District under Untied Fund (State Specific Scheme) during the year 2018-19 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.\nA. Upto a depth of 2m below the existing ground level\n(a) In ordinary soil | item1 | 44.13 | cum. |
| 2 | 2 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.\nWith silt (predominantly non plastic) by truck carriage including loading and unloading. | item2 | 90.778 | cum. |
| 3 | 3 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).\n(a) In prop 1cement: 3 sand :6 coarse aggregate by volume | item3 | 8.735 | cum. |
| 4 | 4 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.\nb) In prop 1cement: 4 sand :8 coarse aggregate by volume | item4 | 1.05 | Sq.m |
| 5 | 5 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)\nIn substructure up to plinth level \nFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick.\n(b) M 20 or prop 1:1.5:3 | item5 | 13.27 | cum. |
| 6 | 6 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)\n In super structure from plinth level up to 1st floor level. \nColumns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\n(b) M 20 or prop 1:1.5:3 | item6 | 4.75 | cum. |
| 7 | 7 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:\nFoundation, footings, bases of columns, pile cap, raft and mass concrete works etc.\nUsing 25mm thick plank | item7 | 15.12 | SQM. |
| 8 | 8 | Sides of tie beams, grade beams etc. at or below ground level.\nUsing 25mm thick plank | item8 | 12.93 | SQM. |
| 9 | 9 | Columns, Pillars, Posts & Strut\nSquare, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face\nUsing 25mm thick plank | item9 | 38.88 | SQM. |
| 10 | 10 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.\nFor depth not exceeding 1.0M.\nUsing 25mm thick plank | item10 | 38.88 | SQM. |
| 11 | 11 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.\nFloors etc. upto 200mm in thickness.\nUsing 25mm thick plank | item11 | 25.86 | SQM. |
| 12 | 12 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.\n(a).Brick on flat soling. | item12 | 72.36 | SQM. |
| 13 | 13 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.\n(I) In Sub-structure upto plinth level including dewatering if necessary\n(a). In proportion 1:3. | item13 | 8.19 | cum. |
| 14 | 14 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall\n(a). In cement mortar in proportion 1:4.\n(1 cement:4 sand)(a). In cement mortar in proportion 1:4.\n(1 cement:4 sand) | item14 | 11.25 | SQM. |
| 15 | 15 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).\na) Normal range Somany/ Orient/Nitco/Asian Make\nii) Somany made | item15 | 49.96 | SQM. |
| 16 | 16 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.\nCeramic tiles\nii)Executive range-1 (Sizes 400 mm x 400mm and above)\n(a) Somany made- VC Shield (Group- 25) (406x406) mm \nDeluxe -VC | item16 | 20.13 | SQM. |
| 17 | 17 | 18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.\n(i) Dungri slab | item17 | 54.5 | Sq.m |
| 18 | 18 | Cutting and cleaning the existing mosaic floor with machine using acid and wax polishing the same as directed for all levels. | item18 | 250.89 | Sq.m |
| 19 | 19 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. | item19 | 369.9 | Sq.m |
| 20 | 20 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \n(a). In cement mortar 1:4 | item20 | 173.89 | SQM |
| 21 | 21 | 15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.\n(c). In cement mortar 1:4 | item21 | 288.8 | SQM |
| 22 | 22 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement\n(iii) 0.50 mm thick | item22 | 117.99 | SQM |
| 23 | 23 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement\n(iii) 0.50 mm thick | item23 | 12.5 | RM |
| 24 | 24 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | item24 | 71 | RM |
| 25 | 25 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. \n(a) With sal wood | item25 | 0.5 | CUM |
| 26 | 26 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. \nb) Non decorative type and block board core.\n(ii) 35 mm thick . | item26 | 49.41 | SQM. |
| 27 | 27 | Demolishing plain cement concrete including disposal of debris as directed for all levels\n(ii) Prop (1 : 3 : 6) or richer mix | item27 | 34 | CUM |
| 28 | 28 | Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels.\n (i) Area of door/window up to 3.00 m2 | item28 | 7 | Each |
| 29 | 29 | Dismantling of existing steel windows/ steel ventilators/ steel windows and steel ventilators without damaging the walls, removing to a safe place and necessary repairs to the edges of walls. | item29 | 14 | Each |
| 30 | 30 | Dismantling all types of ceiling, partition and wall lining and stacking the materials as directed by the department for all levels | item30 | 783.56 | SQM. |
| 31 | 31 | (a) Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete. | item31 | 1598.6 | SQM. |
| 32 | 32 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ opening with M.S. flats at required spacing in frame all round, squre or roundM.S.bars with round headed bolts and nuts or screws.\n (c). Fixed to Brickwork/P.C.C/R.C.C. | item32 | 400.26 | KG |
| 33 | 33 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing.\na) Openable | item33 | 2.03 | Sq.m |
| 34 | 34 | Taking out from position and repairing steel window shutters including steel frames at all levels after cutting out the heavily rusted and damaged portion of the shutters and frames and welded with the new 'Z' section of steel members, corner, hinges, stay etc. including fitting and fixing in position and riveting with new rivets | item34 | 7.67 | Sq.m |
| 35 | 35 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) | item35 | 2236.6 | SQM |
| 36 | 36 | (n) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with alkali resistant primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and also including preparing the surface even and sand papered smooth.\n(i).Priming coat with alkali resistant primer | item36 | 745.64 | SQM |
| 37 | 37 | (ii). Top coat | item37 | 745.64 | SQM |
| 38 | 38 | Applying one self-priming coat of acrylic emulsion coating of Unicem \"Rakshak\" brand by thinning 1ltrs of paints with 1ltrs of water over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department. | item38 | 1490.96 | SQM. |
| 39 | 39 | Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem \"Rakshak\" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. | item39 | 1490.96 | SQM. |
| 40 | 40 | Extra over item no.13.5.2 above for every subsequent coat of acrylic emulsion exterior coatings of Unicem 'Rakshak' brand of required shade. | item40 | 1490.96 | Sq.m |
| 41 | 41 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. \n(a). With ready mixed paint , Wood primer (pink) | item41 | 190.14 | SQM. |
| 42 | 42 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.\n(i).Surfaces over 100mm in width or girth.\na). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item42 | 190.14 | SQM. |
| 43 | 43 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.\na). With ready mixed \"red-lead/ red oxide\" primer.\na). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item43 | 83.87 | SQM. |
| 44 | 44 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.\n(i).Surfaces over 100mm in width or girth.\nb). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item44 | 83.87 | SQM. |
| 45 | 45 | Applying mordent solution of approved brand and manufacture on new C.I sheet for preparation of surfaces for painting @5.00 litre/100 sq. metre of surface and rubbing the solution with brush including thoroughly cleaning the surface of oil, grease, dirt and other foreign matter. | item45 | 268 | SQM. |
| 46 | 46 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\na) Sliding door bolts\ni) 300mm x 16mm | item46 | 16 | Nos. |
| 47 | 47 | b) Tower bolts\niii) 200mm x 12mm | item47 | 36 | Nos. |
| 48 | 48 | c) Door handles\niii) 150mm | item48 | 20 | Nos. |
| 49 | 49 | t) Door stopper with rubber stopper | item49 | 14 | Nos. |
| 50 | 50 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). \nb) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX)\n (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. . | item50 | 26.54 | Qtl. |
| 51 | 51 | Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.\na) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 | item51 | 14.74 | Qtl. |
| 52 | 52 | Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately).\n(a) 1.25mm thick sheet \n(iv) Size 125mm x 60mm (Double rebate) | item52 | 5 | Sq.m |
| 53 | 53 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item53 | 111.27 | SQM. |
| 54 | 54 | Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floting coat of neat cement finished. | item54 | 24.26 | SQM. |
| 55 | 55 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.\nii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm. | item55 | 36.22 | RM |
| 56 | 56 | Providing and fixing, fixing 2 layers of levelled 12mm densified Film faced mirror finish shutterinng plywood of 0.96 gm/cc density as per IS-4990 MARINE GRADE of Weight 35Kg ; the plywood to be secured over stage frame;(base of the RSH/SHS frame to be measured and paid separately.) | item56 | 106.86 | SQM. |
| 57 | 57 | Taking out from position and repairing steel window shutters including steel frames at all levels after cutting out the heavily rusted and damaged portion of the shutters and frames and welded with the new 'Z' section of steel members, corner, hinges, stay etc. including fitting and fixing in position and riveting with new rivets adjusting, cleaning, cutting the holes and making good the damages to metal with existing one. Window grills to be removed during carrying out the work and to be re-fixed in position after completion of work. The glass panes damaged during execution should also be changed. | item57 | 7.56 | SQM. |
| 58 | 58 | Providing formwork using bamboo with 12mm thick Plywood Board sheathing supported by bamboo centering, shuttering, strutting and propping etc. complete and removal of the same for false ceiling work in above 4.00m | item58 | 1 | Job |
| 59 | 59 | Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately)\n(2). Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2.\n(c). 5.00mm thick. | item59 | 12.54 | SQM |
| 60 | 60 | Grading roof for water proofing treatment with\n(a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size) | item60 | 12.888 | cum |
| 61 | 61 | Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels. | item61 | 161.1 | SQM |
| 62 | 62 | (A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.:\n (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat.\n (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement.\n (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat. | item62 | 161.1 | SQM |
| 63 | 63 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item63 | 4.41 | SQM |
| 64 | 64 | Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) \nBRAND: FIRESTOP / FIREND / FIRESHIELD | item64 | 12 | each |
| 65 | 65 | Providing and fixing Plastic Sit Chair of supreme ( 101.shell) | item65 | 500 | Each |
| 66 | 66 | Dismantling and refixing of chair along with anchor fastner | item66 | 1 | Job |
| 67 | 67 | Providing fitting and fixing white vitreous water closet squatting pan (Indian type W.C Orissa pattern) of SONA make of size 500 x 500 mm with 100 mm SCI 'P' or 'S' trap, 10 litre low level PVC flushing cistern with manually controlled device(handle lever) of Parryware / Hindware make with all fittings and fixtures complete including cutting and making good the walls and floors whereever required.\n(A) White\ni) Parryware make | item67 | 2 | Each |
| 68 | 68 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\ni) Parryware make\na) White (vii) Johnson Pedder (Cat No.C8107) | item68 | 2 | Each |
| 69 | 69 | Basin (without pedestal)\n(A) Parryware Make (a) White\n(i) Star Basin 550 x 400 (Cat. No.C0450) | item69 | 2 | Each |
| 70 | 70 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.\n(B) Hindware Make.\n(b) Coloured\n(iv) FB 460 x 350 x 260 (Cat. No.60001) | item70 | 1 | Each |
| 71 | 71 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | item71 | 2 | Each |
| 72 | 72 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified.\n(i) Soap dish light (Cat.No.TR-0661) | item72 | 2 | Each |
| 73 | 73 | Providing, fitting and fixing Chrome Plated robe hook complete as directed and specified.\n (a) Jaquar make \n(i) Continental (Cat.No. ACN-1191N) | item73 | 2 | Each |
| 74 | 74 | Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.(b) Sona make\n(i) Bottle trap indian 32mm (Cat. No.BT-0751) | item74 | 2 | Each |
| 75 | 75 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. \na) In exposed surfaces or in trenches.\n(ii) 110mm dia. | item75 | 12 | R.m |
| 76 | 76 | (iv) 75mm dia. | item76 | 6 | R.m |
| 77 | 77 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\n(ii) 110mm dia. | item77 | 18 | R.m |
| 78 | 78 | (iv) 75mm dia. | item78 | 12 | R.m |
| 79 | 79 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(ii) 110mm dia. | item79 | 10 | Each |
| 80 | 80 | (iv) 75 mm dia. | item80 | 8 | Each |
| 81 | 81 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(ii) 110mm dia. | item81 | 6 | Each |
| 82 | 82 | (iv) 75 mm dia. | item82 | 4 | Each |
| 83 | 83 | Providing fitting and fixing 110mm dia. PVC cowel with ISI make complete as directed and specified. | item83 | 2 | Each |
| 84 | 84 | Providing fiting & fixing C.I. Grating to the floors complete as directed and specified.\n(a) 110mm dia | item84 | 5 | Each |
| 85 | 85 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. | item85 | 13.97 | Cum |
| 86 | 86 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | item86 | 1 | Each |
| 87 | 87 | Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved uP.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified.\n(A) Exposed or in trenches\nSUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40)\n Exposed or in trenches\n c) 32 mm dia | item87 | 22 | RM |
| 88 | 88 | (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure.\nSUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40).\nd) 25 mm dia | item88 | 15 | RM |
| 89 | 89 | e)20 mm dia | item89 | 12 | RM |
| 90 | 90 | f)15 mm dia | item90 | 10 | RM |
| 91 | 91 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified. (G.I. & C.P pipes will be measured separately) \n(II) Jaquare make \n(b)Queen's collection /The Stealth Rangers (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)\ni) C.P. bibcock with wall flange | item91 | 2 | Each |
| 92 | 92 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \n(I) Jaquar\n(a) Continental / Clarion\n(i)15mm dia Male / Female (long thread) | item92 | 5 | Each |
| 93 | 93 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \n(II) Jaguar make \n(a) Continental | item93 | 2 | Each |
| 94 | 94 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.\nb) 40 mm dia.\n | item94 | 1 | Each |
| 95 | 95 | c) 25 mm dia. | item95 | 2 | Each |
| 96 | 96 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes\n(III) 1000 litre capacity\n(a) Sintex make | item96 | 1 | Each |
| 97 | 97 | Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed.\n(b) 1000 liter capacity | item97 | 1 | Each |
| 98 | 98 | Heradesign ( Germany ) :- Supply and installation of acoustics frabric pasted Heradesign Fine of size 600x1200x25mm thk by using H-Splines mounted on Strut (having density 12.4 Kg/m3, Sound absorpation value aw up to 0.90 , Reaction to fire according to EN 13501-1:B-s1,dO ,Strut is fixed Horizontal to the wall at every 600mm c/c. Perpendicular to Strut position first fix H-Splines, Insert Panel into H-splines section and against wall. The Heradesign Fine panels will be back lined with Glass wool 50 mm 24kg density . | item98 | 314 | Sq.m |
| 99 | 99 | Veneer on BWP Plywood 1200x2400x12mm ( Green / Century ) Supply and installation of Plywood 1200x2400x12mm thk (12 mm thick ply having density of 500-600 Kg/m3, NRC 0.2, fire rating Class A ). 12mm ply is fixed on SoundStrut CC 50 by using fasteners. SoundStrut CC50\ to be fixed horizontally on the wall @ every 600mm c/c. Laminate of Vineer of Approved colour is then fixed on Plywood . | item99 | 102 | Sq.m |
| 100 | 100 | Heradesign Fine 15 mm ( Ebony Coloured Panels) : Supply and installation of Heradesign Fine wood wool panel ,factory painted, ( Made in Austria ) of size 1200 x 600 x 15mm mounted on proprietory supplied G I Frame work consisting of basic profile, main profile,edge profile and spacer. | item100 | 170 | Sq.m |
| 101 | 101 | Thermatex Fine Stratos Micro ( Germany ) 595x595x15mm thk : Supply of Thermatex Fine Stratos Micro of size 600X 600 x15mm thk , ( having density 15 mm (c. 4.5 kg/m2) , NRC upto 0.70, Reaction to fire, : A2-s1, d0 as per EN 13501-1, Sound attenuation: Dn,c,w = 34 dB as per EN 20140-9 (15 mm thickness, according to test certificate) , The suspension is done with all accessories like Soffit cleat, leveling clips & wire rods as per the dwgs. | item101 | 438 | Sq.m |
| 102 | 102 | AMF Thermatex Alpha Black SK : Supply and installation of AMF Thermatos Alpha Black mineral wool tile ( made in Germany) of size 600x600x 19 mm suspended by using properietary supplied ceiling suspension system to consist of 2mm or 3mm GI suspension rod/wire with adjustable Butterfly | item102 | 125 | Sq.m |
| 103 | 103 | Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED strip batten light fittings complete with Shade, back plate including connection cable, as approved by the Deptt.s etc. as required. \n LED Strip Batten,12W | item103 | 25 | Each |
| 104 | 104 | Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED round fittings complete with Shade, back plate including connection cable, as approved by the Deptt.s etc. as required. \nLED Round Light,12W | item104 | 60 | Each |
| 105 | 105 | Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator].\n Premium model 1200 mm Sweep CROMPTON make) | item105 | 40 | Each |
| 106 | 106 | Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover ,ceiling rose (Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the Deptt.\n Medium point up to 6.00 metre. Length. | item106 | 55 | Each |
| 107 | 107 | Long point up to 10.00 metre. Length. | item107 | 45 | Each |
| 108 | 108 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.\n Medium point up to 6.00 metre. Length. | item108 | 25 | Each |
| 109 | 109 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete.\n Medium point up to 6.00 metre. Length. | item109 | 5 | Each |
| 110 | 110 | Wiring for light/ fan/ call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/ Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover, ceiling rose etc. complete as directed and specified by the Deptt.\n Medium point up to 6.00 metre. Length. | item110 | 30 | Each |
| 111 | 111 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof IP-43 double door surface mounting horizontal Per Phase Isolation (PP DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. \nABB, Schneider MG, legrand, Hager make) | item111 | 1 | Each |
| 112 | 112 | Supplying with fitting and fixing TP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nB Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) B Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) B Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) B Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) B Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) B Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.)\n63A | item112 | 1 | Each |
| 113 | 113 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nC Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) C Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) C Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) C Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) C Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) C Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.)\n6 to 32A | item113 | 4 | Each |
| 114 | 114 | 3. D Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.)\n6 to 32A | item114 | 13 | Each |
| 115 | 115 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. \n 8 way SPN double door | item115 | 4 | Each |
| 116 | 116 | C Series\n(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.)\n6 to 32A | item116 | 4 | Each |
| 117 | 117 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity.\nWith 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in flat 19 mm ISI marked casing 'n' capping system. | item117 | 450 | Rm |
| 118 | 118 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface with flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system including earth continuity.\nWith 3 x 6 sq. mm. + earth continuity with2x 4 sq. mm. cable in flat 25 mm ISI marked casing 'n' capping system. | item118 | 210 | Rm |
| 119 | 119 | Supply, installation & testing of G.I. earth station with perforated 50 mm dia and 3.00 Metre long heady duty G.I. pipe with necessary 50 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 65 mmx50 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item119 | 2 | Each |
| 120 | 120 | Service connection | item120 | 1 | Job |
| 121 | 121 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .\n 3 & 1/2 Core A2XFY \n 25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | item121 | 45 | Rm |
| 122 | 122 | 50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | item122 | 100 | Rm |
| 123 | 123 | Any other unseen item of work which are not included in the estimate / BOQ , but may be required during execution of the works are as per APWD SOR for 2013-14 for Civil and Sanitary & Water Supply and Electrical works ( Rate to be quoted on lumpsum basis) | item123 | 1 | Job |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
