| 1 | 1 | Repair Main BMS Workstation program or Reprogram, if required | Item1 | 1 | No |
|---|
| 2 | 2 | Repair Depot BMS Work station program and establish communication interfacing with Main BMS | Item2 | 1 | No |
|---|
| 3 | 3 | Programming of Underground Sump Water Level Sensors Healthiness and monitoring the levels if possible | Item3 | 6 | Sumps |
|---|
| 4 | 4 | Programing of Hydropnuematic pump healthiness monitoring (Admin & SQ Pumps) | Item4 | 2 | Set |
|---|
| 5 | 5 | Programming for monitoring of Water Treatment Plant Parameters (Min 10 parameters) | Item5 | 1 | Plant |
|---|
| 6 | 6 | Programming for monitoring of Cooling Tower (CT) Makeup tank water level | Item6 | 3 | CTs |
|---|
| 7 | 7 | Programming of Terrace water tank Level monitoring | Item7 | 2 | Tanks |
|---|
| 8 | 8 | Supply, Installation, Programming and Commissioning of Wind Velocity Sensor (0 – 10 V) | Item8 | 1 | No |
|---|
| 9 | 9 | Programming for monitoring of Ventilation Panel (LT Panel) installed at Terrace | Item9 | 4 | Feeders |
|---|
| 10 | 10 | Auto mode not working for Ground Floor AHU (DSR Room) | Item10 | 2 | Nos |
|---|
| 11 | 11 | Auto mode not working for Ground Floor Fresh Air Fan (1 & 5) | Item11 | 2 | Nos |
|---|
| 12 | 12 | Auto mode not working for Ground Floor Exhaust Fan (3) | Item12 | 1 | No |
|---|
| 13 | 13 | Auto mode not working for Ground Floor Cassette Unit (1 & 2) | Item13 | 2 | Nos |
|---|
| 14 | 14 | Auto mode not working for Ground Floor FCU (4) | Item14 | 1 | No |
|---|
| 15 | 15 | Auto mode not working for Ground Floor Ventilation Fan (3) | Item15 | 1 | No |
|---|
| 16 | 16 | Auto mode not working for Ground Floor LPP Panel | Item16 | 1 | No |
|---|
| 17 | 17 | Auto mode not working for Fifth Floor Treated Fresh Air (TFA) | Item17 | 1 | No |
|---|
| 18 | 18 | Auto mode not working for Fifth Floor AHU | Item18 | 1 | No |
|---|
| 19 | 19 | Auto mode not working for Fifth Floor MVCD | Item19 | 1 | No |
|---|
| 20 | 20 | Auto mode not working for All exhaust fans in terrace | Item20 | 4 | Nos |
|---|
| 21 | 21 | Auto mode not working for Room Exhaust fans installed at Stabling Shed Crew Booking area | Item21 | 5 | Nos |
|---|
| 22 | 22 | Supply & Return Air temperature not showing in the work station for Ground Floor Ceiling AHU (CAHU) 1 & 2 | Item22 | 2 | Nos |
|---|
| 23 | 23 | Supply & Return Air temperature not showing in the work station for Second Floor VAHU (1) | Item23 | 1 | No |
|---|
| 24 | 24 | UPS parameters (12 No’s) are not showing in the workstation. (Already parameters are routed; Programming Rectification may only be required) | Item24 | 10 | UPS |
|---|
| 25 | 25 | Monitoring & Controlling of First Floor AHU (Auditorium) Motorized actuator | Item25 | 1 | No |
|---|
| 26 | 26 | Monitoring & Controlling of First Floor damper MVCD (1) & Fourth Floor MVCD (3) | Item26 | 2 | Nos |
|---|
| 27 | 27 | Monitoring of AHUs differential pressure switches in all floors | Item27 | 20 | Nos |
|---|
| 28 | 28 | Reverse logic of FCU to be checked – Second Floor FCU 06 & 07 | Item28 | 2 | Nos |
|---|
| 29 | 29 | Name changing in SCADA for Plumbing Shaft Ventilation Fan | Item29 | 1 | No |
|---|
| 30 | 30 | Communication to be established between Fire PC and BMS SCADA | Item30 | 1 | No |
|---|
| 31 | 31 | Communication Interfacing of Chiller Plant Manager (CPM) with BMS SCADA | Item31 | 1 | No |
|---|
| 32 | 32 | LT Electrical Panel Readings not showing in BMS Workstation\n\nASS 1, 2 & 3\nASS 1 Essential Panel & Non-Essential Panel\n | Item32 | 5 | Nos |
|---|
| 33 | 33 | Calibrate CO2 sensors and program alignment with fresh MVCD (MVCD operation to be aligned with CO2 level) | Item33 | 8 | Nos |
|---|
| 34 | 34 | Repair of Ethernet Switch (18) located at Rolling Stock Shed, Koyambedu Depot | Item34 | 1 | No |
|---|
| 35 | 35 | Resolve communication issue of Ethernet switch 2 & 4 in CMRL Administrative Building | Item35 | 2 | Nos |
|---|
| 36 | 36 | Diesel Generator parameters are not showing in BMS Workstation (ASS 1, ASS2 & ASS 3) | Item36 | 3 | Nos |
|---|
| 37 | 37 | Trends & Excel Sheets of Energy Report are not showing in BMS Workstation | Item37 | 1 | Ls |
|---|
| 38 | 38 | Local Control Panel screen and program not working | Item38 | 1 | Ls |
|---|
| 39 | 39 | Programming of Monitoring and Controlling for Cassete units installed at 6th Floor | Item39 | 5 | Units |
|---|
| 40 | 40 | Calibration of AHU Temperature Sensors | Item40 | 1 | Ls |
|---|
