Tender For Repair And Maintenance Works To The Pre Aps Shed At Ttps; 1 Dismantling the existing Brick work for the required width & depth as per the instructions of engineer in charge including cost of all materials, labours, lead, lift, curing, etc. complete. 2 Providing PCC 1:2:4 cement concrete using OP/PP cement with 12 -20mm size machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete. 3 Brick work in CM 1:5 using class II bricks including cost of all materials, labours, lead, lift, curing, etc. complete. 4 Clean removal of cement plaster from walls including cost of all materials, labours, lead, lift, curing, etc. complete. 5 Plastering with C.M 1:5, 12 mm thick for inner surfaces including cost of all materials, labours, lead, lift, scaffolding, curing, etc. complete. 6 White washing one coats with shell lime including cost of all materials, labours, lead, lift, scaffolding, curing, etc. complete. 7 Providing two coats of Acrylic distemper of approved quality, brand & colour for old ceiling & inner wall surfaces including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete. 8 Providing and fixing of anodized aluminium partition works with 65x38mm aluminium section as frame with 12mm thick prelaminated particle board (Novapan sheet) panels fixed using anodized aluminium beading and rubber lining with standard hardware including cost of all materials, labour charges, all leads, lifts etc., complete. 9 Supplying and fixing in position best quality PVC External water line pipes of 20mm dia having 10 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings. 10 Supplying and fixing of Porcelain Urinal with all accessories such as 32mm dia. Bell mouth, PVC connection, 15mm dia. GM wheel valve, 15mm dia. B class GI waste water pipe, 15 mm dia. nylon connection, 15mm dia. brass nipple, etc. including cost of all materials, labours, lead, lift, curing, etc. complete. 11 Supplying and fixing of SS Sink of size 1200 x 550 x 180mm with all accessories including cost of all materials, labours, lead, lift, curing, etc. complete. 12 Careful dismantling of aluminium glazed doors, complete overhauling with replacement of worn out/ damaged spares and refixing in proper conditionincluding cost of labour charges lead, lift etc., complete. 13 Supplying and fixing Hydraulic Floor Springs of various sizes, Double Acton Hydraulic Floor Spring of approved quality, brand, manufacture as per BIS Standards for doors including cost of cutting floors as required, embedding in to floors and stainless steel cover plates with aluminium pivot and single piece MS sheet outer box with side plate etc., capable of taking up to 130 kg weight from door shutter, like HARDWYN make (U-32) or its Equivalent with ISI monogram. 14 Supplying and providing sun control film including cost of labour charges lead, lift etc., complete. 15 Painting two coats with ready mixed enamel paint over one coat of primer for the old steel surface including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, etc. complete. 16 Supplying and fixing in position whiteglazed European Water Closet of best quality and approved make with 100 mm P or S trap connecting with CI pipe of 100mm dia/ PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 12.5 liters capacity PVCporcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.
