Northern Coalfields Limited-NCL has published Annual Repair And Maintenance Of Industrial Structures For A Period Of Two Years At Nigahi Project . . Submission Date for this Tender is 10-08-2020. Building Repair Tenders in NIGAHI AREA Madhya Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: Annual repair and maintenance of Industrial structures for a period of two years at Nigahi Project. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Earth work in excavation in all kinds of soil/silt all operation mechanically with all lifts complete as per instruction of EIC.for a lead of 1.00 KM | 3000 | cum | |
2 | 2 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. | 300 | cum | |
3 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | 100 | cum | |
4 | 4 | Carriage of lime,moorum , building rubbish by mechanical transport including loading, unloading and stacking: 1km lead | 1000 | cum | |
5 | 5 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.All kinds of soil. | 20000 | sqm | |
6 | 6 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. | 60000 | sqm | |
7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 50 | cum | |
8 | 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 70 | cum | |
9 | 9 | Random rubble masonry with hard stone in foundation and plinth including levellingup with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) | 150 | cum | |
10 | 10 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 20 | cum | |
11 | 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | 10 | cum | |
12 | 12 | Providing, hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth sills and the like including the cost of required centring, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size). | 6 | cum | |
13 | 13 | Reinforcement for RCC work including straightening ,cutting, bending placing in position and binding all complete.:Cold twisted bars | 3060 | Kg | |
14 | 14 | Centring and shuttering including strutting, propping etc. and removal of form for : (a) Foundations, footings, bases of columns, etc. For mass concrete. | 80 | sqm | |
15 | 15 | Centring and shuttering including strutting, propping etc. and removal of form for : (b)Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | 30 | sqm | |
16 | 16 | Centring and shuttering including strutting, propping etc. and removal of form for : (c)Columns, Pillars, Piers, Abutments, Posts and Struts | 30 | sqm | |
17 | 17 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) | 1500 | sqm | |
18 | 18 | Neat cement punning | 500 | sqm | |
19 | 19 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm nominal size stone aggregate. | 400 | sqm | |
20 | 20 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. | 40 | sqm | |
21 | 21 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | 90 | sqm | |
22 | 22 | Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. | 50 | sqm | |
23 | 23 | Demolishing R .C.C. work, including stacking of steel bars and disposal o f unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | 7 | cum | |
24 | 24 | Demolishing brick work manually/ by mechanical means including stacking of servicable material and disposal of unservicable material within 50 metres lead as per direction of engineer-in-charge:in cement mortar | 45 | cum | |
25 | 25 | Demolishing stone rubble masonry manually/by machanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per directionof Engineer-in-charge:In cement mortar | 40 | cum | |
26 | 26 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge.1:3:6 or richer mix | 40 | cum | |
27 | 27 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. | 15 | each | |
28 | 28 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: | 3500 | kg | |
29 | 29 | Providing and fixing ball bearing for rolling shutters. | 10 | each | |
30 | 30 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece. | 30 | sqm | |
31 | 31 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side /top /centre hung with beading and all members such as KlIB and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and rivetted with 15x3mm lugs, 10cm long, embedded in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of hinges, pivots, float glass panes with glazing clips and special metal sash putty of approved make and a priming coat of approved steel primer excluding the cost of metal beading and other fittings except necessary hinges or pivots complete as per approved design.(sectional weight of only steel members shall be measured for payment without weight of glass & other fittings.kg) | 100 | kg | |
32 | 32 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.Fixed to steel windows by welding. | 150 | kg | |
33 | 33 | Providing and fixing ISI m arked oxidised M.S.sliding door bolts with nuts and screws etc. Complete.250x16 mm | 40 | each | |
34 | 34 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (a)250x10 mm | 40 | each | |
35 | 35 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (b)150x10 mm | 42 | each | |
36 | 36 | Providing and fixing ISI marked oxidised M.S.handles conforming to IS 4992 tower with necessary screws etc. complete : a) 125mm | 40 | each | |
37 | 37 | Providing and fixing ISI marked oxidised M.S.handles conforming to IS 4992 tower with necessary screws etc. complete : b ) 100mm | 40 | each | |
38 | 38 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. Complete. 300x16 mm | 20 | each | |
39 | 39 | Providing and fixing alluminium tower bolt ISI marked(anodic coating not less than grade AC 10 as per IS 1868)……… (a)250x10 mm | 30 | each | |
40 | 40 | Providing and fixing alluminium tower bolt ISI marked(anodic coating not less than grade AC 10 as per IS 1868)……… (b)150x10 mm | 30 | each | |
41 | 41 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (a)125 mm | 30 | each | |
42 | 42 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (b)100 mm | 30 | each | |
43 | 43 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): (a)For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 100 | kg | |
44 | 44 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): (b)For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).Anodised aluminium (anodised transparent or dyed to required shade according | 50 | kg | |
45 | 45 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness | 60 | sqm | |
46 | 46 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate | 15 | each | |
47 | 47 | Renewing glass panes, with putty and nails wherever necessary:Float glass panes of thickness 4 mm | 150 | sqm | |
48 | 48 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. Including dismembering and stacking within 50metres lead. | 6000 | kg | |
49 | 49 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of:GS sheet | 500 | sqm | |
50 | 50 | Carriage of material by mechanical transport including loading, unloading and stacking: 1km lead: Steel | 5 | sqm | |
51 | 51 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275gm/ m² | 100 | sqm | |
52 | 52 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 250 | sqm | |
53 | 53 | providing and fixing 15 cm wide 45 cm overall semi-circular plain G S sheet gutter with iron bracket 40x3 mm size bolts and nuts and washers etc. complete including making necessary connections with rain water pipes complete .0.80mm thick with zink coating not less than 275 gm/sqm | 100 | mtr | |
54 | 54 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | 40 | sqm | |
55 | 55 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below | 40 | each | |
56 | 56 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :100x58x1.90 mm | 20 | each | |
57 | 57 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.Single rubber stopper | 20 | each | |
58 | 58 | Applying priming coat :With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) | 80 | sqm | |
59 | 59 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 500 | sqm | |
60 | 60 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. | 3000 | sqm | |
61 | 61 | White washing with lime to give an even shade :Old work (two or more coats) | 3000 | sqm | |
62 | 62 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats) | 4000 | sqm | |
63 | 63 | Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @ 0.90 ltr/10 sqm). | 6000 | sqm | |
64 | 64 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications | 1000 | sqm | |
65 | 65 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110mm diameter. | 150 | metre | |
66 | 66 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised R igid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Bend 87.5°.110 mm bend | 16 | each | |
67 | 67 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement: 4 coarse sand) and making good the wall etc. complete.110 mm | 50 | each | |
68 | 68 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.300 mm weighing not less than 200 gms. | 10 | each | |
69 | 69 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters | 25 | sqm | |
70 | 70 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. Sal wood | 1 | cum | |
71 | 71 | Supplying and stacking at site:moorum | 500 | cum | |
72 | 72 | Colour washing such as green, blue or buff to give an even shade- Old work ( two or more coats) with lime. | 4000 | sqm | |
73 | 73 | Welding by gas or electric plant including transportation of plant at site etc. all complete. | 4000 | per cm length | |
74 | 74 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tiles 600x600 | 50 | sqm | |
75 | 75 | Providing& Fixing tiled false ceiling of specified materialsof size 595x595mm in size…EIC.8mmthick fully perforated calcium silicate board madewith calcorius& silliceous…backing | 120 | sqm | |
76 | 76 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 10 | cum | |
77 | 77 | Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately): 12mm thick | 80 | sqm | |
78 | 78 | Providing and fixing concertina coil fencing 240.65 metre 0.00 with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. anle, C.C. blocks shall be paid separately. | 300 | metre | |
79 | 79 | PART B | |||
80 | 80 | Brick work with modular flyash bricks(FLAG) conforming to IS 12894 class designation 75 in foundation and plinth in cement mortar 1;6….. | 100 | cum | |
81 | 81 | Brick work with modular flyash bricks(FLAG) conforming to IS 12894 class designation 75 in superstructure above plinth level upto floor v level in all shapes….. | 100 | cum | |
82 | 82 | Providing& Fixingby welding of hard drawn steel wire fabric 75x25mm | 120 | sqm | |
83 | 83 | spreading and levelling to gradient kankar/shingle/gravel/moorum/red bairi etc | 500 | cum | |
84 | 84 | Structural steel work welded in built up section , as per instn. Of EIC ( only Labour charge). | 10000 | kg | |
85 | 85 | CGI Sheet roofing as per instn. Of EIC ( only Labour charge). | 400 | SqM | |
86 | 86 | Providing 27.5cm long wire spring grade no :-2 for rolling shutter | 15 | each | |
87 | 87 | providing 6mm thick commercial ply | 45 | sqm | |
88 | 88 | Petty carpenting work such as small repair of doors,making holes,fixing of miscellaneous fixtures etc (a)small carpenting work :-Repair work like small repairing of cupboard,nails,screws,fixing hinges,tightening of doors and windows shutters etc.similar nature of work. | 200 | each | |
89 | 89 | Petty carpenting work such as small repair of doors,making holes,fixing of miscellaneous fixtures etc (b)Large carpenting work:- Repairing work like door and window repairing,old shutter repairing and refixing,false ceiling repair,hingesetc. | 200 | each | |
90 | 90 | Repairing of rolling shutters ncluding replacing of ball bearings,springs etc whrever required .(cost of ball bearings,springs to be paid for separately)and adjustment/alignment of MS laths all complete as per instruction of EIC | 20 | each | |
91 | 91 | Welding of hinge,gate,locking arrangement,pintel ,door and window frame and grill etc, | 80 | each | |
92 | 92 | Providing 8mm thick calcium silicate oerforated tiles of size 595x595 mm | 50 | sqm | |
93 | 94 | Total impact of GST for the purpose of CTC | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail