| 1 | 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar | | 10 | Cum |
|---|
| 2 | 2 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of : G.S. Sheet | | 3831 | Sqm |
|---|
| 3 | 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | | 12 | Cum |
|---|
| 4 | 4 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | | 3831 | Sqm |
|---|
| 5 | 5 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | | 127 | Meter |
|---|
| 6 | 6 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase | | 252 | Meter |
|---|
| 7 | 7 | Providing and fixing turbo/ wind ventilators (extraction capacity of minimum 1800 cubic feet per minute air circulated fan of minimum 22 inches throat dia wind ventilator with FRP base plate) including cost of fixing turbo/ wind ventilators on new 6m thick Asbestos cement corrugated sheet roofing on godown roof including cost of all materilas, tools and plants, fixtures/ fastenings, labour insurance, safety measures, disposal of broken A C sheets as directed by Engineer-in-charge including guarantee for turbo ventilator of minimum 3 years and performance warranty etc. complete. | | 12 | Each |
|---|
| 8 | 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work | | 1500 | Sqm |
|---|
| 9 | 9 | Deduct for salvage value of dismantled materials of CGI sheet roofing sheets as is whereis basis for taking away by the contractor (Area will be taken as the area before dismantling) | | 3831 | Sqm |
|---|
| 10 | 10 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | | 14.1 | Cum |
|---|
| 11 | 11 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) | | 42.3 | Cum |
|---|
| 12 | 12 | Supplying and filling in plinth with river sand under floors, including watering, ramming, consolidating and dressing complete. | | 42.3 | Cum |
|---|
| 13 | 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | | 28.2 | Cum |
|---|
| 14 | 14 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | | 282 | Sqm |
|---|
| 15 | 15 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick | | 445 | Meter |
|---|
| 16 | 16 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | | 60 | Cum |
|---|
| 17 | 17 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | | 4700 | Sqm |
|---|
| 18 | 18 | White washing with lime to give an even shade : Old work (one or more coats) | | 2200 | Sqm |
|---|
| 19 | 19 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). | | 2500 | Sqm |
|---|
| 20 | 21 | Lettering with black Japan paint of approved brand and manufacture. | | 900 | per letter per cm height |
|---|
