Tender For The Reputed Firms For Rate Of Different Materials (Including Royalty At Source & Excluding Gst) For Analyzing And Preparation Of S.O.R Of Rdd Jharkhand 2020-21 To Be Used In Constituting Estimates -, koderma-Jharkhand

Tender For The Reputed Firms For Rate Of Different Materials (Including Royalty At Source & Excluding Gst) For Analyzing And Preparation Of S.O.R Of Rdd Jharkhand 2020-21 To Be Used In Constituting Estimates -M-001 AC pipe 100 mm M-002 Aggregate - For 37.5 mm Maximum size - 22.4 mm to 5.6 mm M-003 Aggregate - For 37.5 mm Maximum size - 45 mm to 22.5 mm M-004 Aggregate - For 37.5 mm Maximum size - Below 5.6 mm M-005 Aggregate - For 53 mm Maximum size - 22.5 mm to 5.6 mm M-006 Aggregate - For 53 mm Maximum size - 63 mm to 45 mm M-007 Aggregate - For 53 mm Maximum size - Below 5.6 mm M-008 Aggregate - Grading I (40 mm nominal Size) 10 mm - 5 mm M-009 Aggregate - Grading I (40 mm nominal Size) 25 mm – 10 mm M-010 Aggregate - Grading I (40 mm nominal Size) 37.25 mm - 25 mm M-011 Aggregate - Grading I (40 mm nominal Size) 5 mm and below M-012 Aggregate - Grading II (19 mm nominal Size) 10 mm - 5 mm M-013 Aggregate - Grading II (19 mm nominal Size) 25 mm – 10 mm M-014 Aggregate - Grading II (19 mm nominal Size) 5 mm and below M-015 Aggregate 10 mm M-016 Aggregate 20 mm M-017 Aggregate 40 mm M-018 Aggregate- Crushable type such as moorum or Gravel for Grading I M-019 Aggregate- Crushable type such as moorum or Gravel for Grading II M-020 Aggregate- Crushable type such as moorum or Gravel for Grading III M-021 Aggregate-Grading I 90 mm to 45 mm M-022 Aggregate-Grading II 63 mm to 45 mm M-023 Aggregate-Grading III 53 mm to 22.4 mm M-024 Aggregates 22.4 mm to 2.36 mm for wet mix macadam M-025 Aggregates 45 mm to 22.4 mm for wet mix macadam M-025 Aluminium sheeting (1.5 mm thick)--Aluminium sheeting fixed with encapsulated lens type reflective sheeting of size including lettering and signs as applicable background with epoxy paint M-026 Aluminium Studs 100 mm x 100 mm fitted with lense reflectors M-027 Bamboo (1st Class) 85 mm - 100 mm dia, 2.0 m long M-027 Bamboo (1st Class) 85 mm - 100 mm dia, 2.5 m long M-028 Bamboo (1st Class) 85 mm - 100 mm dia, 3.0 m long M-028 Bamboo (1st Class) 85 mm - 100 mm dia, 4.5 m - 5.5 m long M-029 Bamboo (2nd Class) 75mm dia, 1.8 m - 2.5 m long M-029 Bamboo (2nd Class) 75mm dia, 2.1 m - 3.0 m long M-030 Barbed wire M-031 Binding Material for Gr.-I (Moorum) M-032 Binding wire M-033 Bitumen (Crumb Rubber Modified) Ex-Bokaro(CRMB-55) Packed M-034 Bitumen (Natural Rubber Modified) M-035 Bitumen (Polymer Modified) Ex-Haldia, Packed M-036 Bitumen (S-65) Ex-Bokaro Packed M-037 Bitumen (S-90) Ex-Bokaro Packed M-038 Bitumen Emulsion (RS-1) Ex-Bokaro Packed, HDPE /NEW MS DRUMS M-039 Bitumen Emulsion (SS-1) Ex-Bokaro Packed, HDPE /NEW MS DRUMS M-040 Bituminous sealant M-041 Blasted rubble (Spalls) M-042 Blasting material M-043 Bond stone (400 mm x 150 mm x 150 mm) M-044 Brick 1st Class (75A) M-045 Cement M-046 Cement Primer M-047 Chlorprene Elastomer or Closed Cell Foam Sealing Element -(Supply of elastomeric slab seal expansion joint assembly manufactured by using chloroprene elastomer for elastomeric slab unit conforming to Clause 915.1 of IRC:83 (Part II) complete as per approved drawings and specifications. Add 5 per cent of cost of material for anchorage reinforcement, welding and other incidentals). M-048 Compensation for earth taken from private land (Including Royalty @Rs. 30.00 per cum and Compensation @ Rs.1.10 per cum) M-049 Compressible Fibre Board M-050 Copper plate M-051 Corbelling Stones (300 mm x 150 mm x 150 mm) M-052 Corrosion Resistant Structural Steel Grating M-053 Credit for excavated rock found suitable for use M-054 Crow bars 40 mm dia (hire charges) M-055 Crushed Sand or Grit Passing 2.36 mm and retained on 180 micron M-056 Crushed Slag M-057 Crushed Stone Aggregate 26.5 mm to 75 micron M-058 Crushed Stone chipping 13.2 mm nominal size M-059 Crushed Stone Chipping 6.7 mm size 100% passing 11.2 mm and retained on 2.36 mm M-060 Crushed Stone Chipping 6.7 mm size 100% passing 9.5 mm and retained on 2.36 mm M-061 Crushed Stone chipping 9.5 mm nominal size M-062 Crushed Stone Coarse Aggregate Passing 53 mm and retained on 2.8 mm M-063 Curing compound M-064 Debonding strips (3.75mx10mmx5mm cut-out of rubber filler board or similar material including 5 % wastage) M-065 Edge Stone (450 mm x 350 mm x 100 mm) M-066 Edge Stone (450 mm x 350 mm x 200 mm) M-067 Elastomeric bearing assembly -(Elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation, complete with all components as per drawing and technical specification) M-068 Electric Detonator M-069 Epoxy Paint M-070 Epoxy Primer M-071 Farmyard manure M-072 Fevicol adhesive M-073 Filter media M-074 Fine aggregate/Crushed sand 2.36 mm to 75 micron M-075 Galvanised angle M-076 Galvanised angle Section 100 mm x 100 mm of 12 mm thickness M-077 Gelatine 80 per cent M-078 GI Pipe 100 mm dia (TATA or equivalent make) M-079 GI Pipe 50 mm dia (TATA or equivalent make) M-080 GI wires (4mm dia) M-081 Graded stone aggregate M-082 Granular material (Natural occuring, soil gravel mixture / quarry waste, kankar, laterite, dhandla M-083 Hand Broken Metal 40 mm size M-084 Indigo/Robine blue M-085 Interlocking Blocks with 60 mm thickness M-086 Interlocking Blocks with 80 mm thickness M-087 Joint filler board M-088 Jute netting, open weave 25 mm square opening M-089 Jute rope 12 mm dia M-090 Key Aggregates passing 22.4 mm and retained on 2.8 mm M-091 Lime M-092 Lime putty M-093 Local Wood Piles (1st Class) 150-200 mm dia ,6m long M-094 Local Wood Piles (1st Class) 100 mm x 75 mm M-095 Loose stone M-096 MS clamps M-097 MS Flat / Structural Steel M-098 MS Sheet Tube (47 mm x 47 mm x 12 SWG Sheet) M-099 MS Sheet 1.5 mm thick M-100 MS Sheet 2 mm thick M-101 Nuts, Bolts and Rivets M-102 Paint (Synthetic Enamel) M-103 Plasticizer M-104 Polythene sheet (125 micron) M-105 Polythene Sheething (0.2mm to 0.5mm thick), (Covering 2/3 rd Dowel bars (20x23) and tight fit including 5% wastage) M-106 Quarried Stone 150-200 mm size M-107 RCC Pipe NP3 (1200 mm dia) M-108 RCC Pipe NP3 (1000 mm dia) M-109 RCC Pipe NP3 (750 mm dia) M-110 RCC Pipe NP3 (600 mm dia) M-111 RCC Pipe NP3 (500 mm dia) M-112 RCC Pipe NP4 (1200 mm dia) M-113 RCC Pipe NP4 (1000 mm dia) M-114 RCC Pipe NP4 (750 mm dia) M-115 RCC Pipe NP4 (600 mm dia) M-116 RCC Pipe NP4 (500 mm dia) M-117 Red-oxide Primer M-118 Road marking paint M-119 Sand (Coarse) M-120 Sand (Fine) M-121 Seeds M-122 Steel Pipe 50 mm dia M-123 Steel Reinforcement (HYSD Bars) M-124 Steel Reinforcement (MS Round Bars) M-125 Steel Reinforcement (TMT Bars) M-126 Stone Boulder of size 150 mm and below M-127 Stone Chips 12 mm size M-128 Stone Chips 13.2 mm to 5.6 mm M-129 Stone Crushed Aggregate 11.2 mm to 0.09 mm M-130 Stone for Coarse Rubble Masonry 1st Sort M-131 Stone for Coarse Rubble Masonry 2nd Sort M-132 Stone for Random Rubble Masonry M-133 Stone for Stone Set Pavement (300 mm x 200 mm x 150 mm) M-134 Stone Screening - Type A 13.2 mm for Grading-1 M-135 Stone Screening - Type A 13.2 mm for Grading-2 M-136 Stone Screening - Type B 11.2 mm for Grading-2 M-137 Stone Screening - Type B 11.2 mm for Grading-3 M-138 Stone spall M-139 Traffic cones M-140 Water M-141 Coarse/ Well graded Granular Sub Base Material - Grading A 2.36 mm below M-142 Well graded Granular Sub Base Material - Grading A 26.5 mm to 4.75 mm M-143 Well graded Granular Sub Base Material - Grading A 53 mm to 26.5 mm M-144 Well graded Granular Sub Base Material - Grading B 2.36 mm below M-145 Well graded Granular Sub Base Material - Grading B 26.5 mm to 4.75 mm M-146 Well graded Granular Base Material - Grading C 2.36 mm below M-147 Coarse/ Well graded Granular Base Material - Grading C 9.5 mm to 4.75 mm M-148 Well Graded Material for Sub-Base - Grading I 2.36 mm below M-149 Close/ Well Graded Material for Sub-Base - Grading I 53 mm to 9.5 mm M-150 Close/ Well Graded Material for Sub-Base - Grading I 9.5 mm to 2.36 mm M-151 Coarse/ Well Graded Material for Sub-Base - Grading II 2.36 mm below M-152 Coarse/ Well Graded Material for Sub-Base - Grading II 26.5 mm to 9.5 mm M-153 Close/ Well Graded Material for Sub-Base - Grading II 9.5 mm to 2.36 mm M-154 Coarse/ Well Graded Material for Sub-Base - Grading III 2.36 mm below M-155 Coarse/ Well Graded Material for Sub-Base - Grading III 4.75 mm to 2.36 mm M-156 Coarse/ Well Graded Material for Sub-Base - Grading III 9.5 mm to 4.75 mm M-157 Wooden sleepers (250 mm x 250 mm x 125 mm) (hire charges) M-158 Edge Block of Approved Shape thickness and size M-159 Stone (450mm X300mmX100mm) =6.48 M-160 MILD Steel Angle Iron (75mmX75mmX6mm) M-161 Angle Iron (50mm x 50mm x 6mm) for Lugs M-162 MS Sheet 1.6mm thick

Refer document

Refer document

Refer document