| 1 | 1 | Dismantling boarding, any description, fixed in any position with nails or screws, complete all as specified and as directed. | BI01010001010000000000000515BI0100001113 | 500 | SQUARE METRE |
|---|
| 2 | 2 | Dismantling framed work of timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and as directed. | BI01010001010000000000000515BI0100001114 | 2.5 | CUBIC METRE |
|---|
| 3 | 3 | Dismantling framed work of timber scantlings under 40 sq. cm in section, as in fillets, rails, posts, rafters, purlins, etc. complete all as specified and as directed. | | 400 | RUNNING METRE |
|---|
| 4 | 4 | Dismantalling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings, complete all as specified and as directed. | | 1005 | SQUARE METRE |
|---|
| 5 | 5 | Demolition of wall and ceiling boards (fibre, pulp, insulation etc) or insulation sheets/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed. | | 200 | SQUARE METRE |
|---|
| 6 | 6 | Dismantling brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed. | | 16 | CUBIC METRE |
|---|
| 7 | 7 | Galvanised corrugated mild steel sheeting, with two corrugations side lap fixed with 'L' type or 'J' type or cranked hook bolts with washers, as in roof, 0.63mm thick, grade-O quality, with 120gms/sqm zinc coating and grade 'B' Class 8, complete all as specified and as directed. | | 530 | SQUARE METRE |
|---|
| 8 | 8 | Refixing plain or corrugated steel sheeting, any gauge, thickness, roof coverings with two corrugation side lap fixed with L' type or 'J' type or cranked hook bolts with washers, complete all as specified and as directed. \nNote:-serviceable sheets obtained under item No. 04 here-in-before shall be re-used. | | 300 | SQUARE METRE |
|---|
| 9 | 9 | Plain, galvanised, mild steel sheeting, fixed with 'L' type or 'J' type or cranked hook bolts with washers, in ridges, hips, vally gutters drip and straight flashings (length and girth as fixed) , 0.63mm thick, grade-O quality, with 120gm/sqm zinc coating, complete all as specified and as directed. | | 125 | SQUARE METRE |
|---|
| 10 | 10 | 2mm thick, fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook, bolts with washer, as in roof wall etc., complete all as specified and directed. | | 50 | SQUARE METRE |
|---|
| 11 | 11 | 2mm thick, fiber glass reinforced translucent plain sheeting fixed with bead/glazing pins, coach screw and washer, as in roof, wall etc. with including hacking out old broken sheet (any thickness, size quality or description), complete all as specified and as directed. | | 150 | SQUARE METRE |
|---|
| 12 | 12 | Plain, galvanised, mild steel sheeting, 1.00mm thick, as in eaves board and straight flashings (length & girth as fixed) with welded or sholdered joint to be provided, complete all as specified and as directed. | | 50 | SQUARE METRE |
|---|
| 13 | 13 | Cutting holes exceeding half brick but not exceeding one brick in brick walls built in cement mortor or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or plain cement concrete 1:2:4 Type B-1 using 20mm graded crushed stone aggregate as required, complete all as specified and as directed. | | 30 | EACH |
|---|
| 14 | 14 | Preparation of newly untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate,complete all as specified and as directed. | | 175 | SQUARE METRE |
|---|
| 15 | 15 | Preparation of old painted surfaces of steel or iron work or CGI/PGI in walls or in roof sheeting, of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour), complete all as specified and as directed. | | 342 | SQUARE METRE |
|---|
| 16 | 16 | Preparation of old painted surfaces of steel or iron work or CGI/PGI in walls or in roof sheeting, of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour), complete all as specified and as directed. | | 775 | SQUARE METRE |
|---|
| 17 | 17 | Rolled mild steel as in roof trusses (framed), trussed, posts, struts, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, base plate and gusset plates etc confirming to Fe 410 -W (Gde-E- 250) quality-A, complete all as specified and as directed. | | 3000 | KILOGRAM |
|---|
| 18 | 18 | Brick work with old size bricks having crushing strength not less than 75Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and as directed. | | 10 | CUBIC METRE |
|---|
| 19 | 19 | Description all as per item No. 18 above, but except bricks (serviceable bricks retrived from item No. 06 here-in-before shall be used), complete all as specified and as directed. | | 6 | CUBIC METRE |
|---|
| 20 | 20 | Plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in lintels upto 1.50 metres clear span, steps, seismic and other similar bands, coping, bed plates, for inserting hold fasts, filling in mild steel frames etc. and the like including weathering slighting rounded or chamfered angles and throating, complete all as specified and as directed. | | 1.5 | CUBIC METRE |
|---|
| 21 | 21 | Rendering 15mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed. | | 65 | SQUARE METRE |
|---|
| 22 | 22 | Rendering 15mm thick on other than fair faces of brick work or on stone surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and as directed. | | 65 | SQUARE METRE |
|---|
| 23 | 23 | Preparation of newly plastered/unplastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and as directed. | | 65 | SQUARE METRE |
|---|
| 24 | 24 | Preparation of new plastered or un-plastered surfaces of walls and applying two coats of Acrylic exterior emulsion paint in camouflaging (Disruptive) pattern (Green, Grey and Brown colour) over a coat of acrylic primer, complete all as specified and as directed. | | 65 | SQUARE METRE |
|---|
| 25 | 25 | Mild steel framed work as in false ceiling, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410- w (Gde-E-250) quality 'A', complete all as specified and as directed. | | 2000 | KILOGRAM |
|---|
| 26 | 26 | Anodised aluminium snap grid frame work fabricated from aluminium angle of size 44x22x2mm having wight 0.345 kg/RM all around along wall, main tee of size 38.1x38.1x1.6mm having weight 0.322 Kg/RM, cross tee of size 25.4x25.4x1.6mm having weight 0.212 Kg/RM and suspenders for false ceiling for size of grid 605 x 605 mm including hangers 6 mm dia GI (up to 1200 mm long) adjusting level fixed to roof, complete all as specified and as directed. | | 150 | SQUARE METRE |
|---|
| 27 | 27 | 2nd class soft wood (Kail) clean swan, timber framed and fixed as in scantlings for frame work for ceiling, complete all as specified and as directed. | | 2.5 | CUBIC METRE |
|---|
| 28 | 28 | Plywood, grade BWP, 6mm thick, type BB with 5 Nos of ply, fixed with screws to mild steel frame work as in ceiling, including necessary wooden fillet of appropriate size, complete all as specified and as directed. | | 150 | SQUARE METRE |
|---|
| 29 | 29 | Non asbestos fibre cement building boards, 4 mm thick, of size 60 x 60cm, fixed or laid/inserted to grid frame work with screws, complete all as specified and as directed. | | 150 | SQUARE METRE |
|---|
| 30 | 30 | Perforated particle board/ tiles 12 mm thick for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to Aluminium grid frame work or with staples on snap grid, complete all as specified and as directed. | | 50 | SQUARE METRE |
|---|
| 31 | 31 | Prelaminated particle board 12mm thick, interior grade,prelaminated both sides with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed. | | 100 | SQUARE METRE |
|---|
| 32 | 32 | Asbestos cement plain building boards, 4 mm thick, fixed to mild steel frame work with screws for false ceiling, complete all as specified and directed. | | 50 | SQUARE METRE |
|---|
| 33 | 33 | 2nd class soft wood (Kail) Plain fillets, square,rectangular or triangular in section, exceeding 3 sq.cm but n. exceeding 6 sq.cm in sectional area, clean sawn, se-cured with nails or brads, complete all as specified and directed. | | 200 | RUNNING METRE |
|---|
| 34 | 34 | Preparation of new surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed. | | 200 | SQUARE METRE |
|---|
| 35 | 35 | Preparation of new surfaces of ceiling and applying two coats of distemper oil emulsion, complete all as specified and as directed. | | 50 | SQUARE METRE |
|---|
| 36 | 36 | Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, not exceeding 10cm width or girth when unconnected with other painting or painted in different tint and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. | | 20 | PER TEN RUNNING METRE |
|---|
| 37 | 37 | Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. | | 200 | SQUARE METRE |
|---|
| 38 | 38 | Note :- An amount of Rs. 33,725.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. | | | |
|---|
