Public Works Department-PWD has published Maintenance Of Non-Residential Buildings Under Pwd ( R And B ) Kamalpur Sub-Division During The Year 2020-21 Building Maintenance Work. Submission Date for this Tender is 20-07-2020. Building Repair Tenders in kamalpur Tripura. Bidders can get complete Tender details and download the document.
Name of Work: Mtc of Non-Residential Buildings Under PWD (R&B) Kamalpur Sub-Division during the year 2020-21. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | SUB-HEAD: EARTH WORK | BI01010001010000000000000515BI0100001112 | ||
2 | 1.01 | Clearing jungle including uprooting of rank vegetation,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. | BI01010001010000000000000515BI0100001113 | 1200 | Sqm |
3 | 1.02 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m upto 1.5 m, including getting out the excavated soil andin width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift.\nAll kinds of soil, a. By manual means | 75 | Cum | |
4 | 1.03 | Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts including spreading in horizontal each layer by using plate compactor or by any suitablerequired slope, ramming, consolidating and compactinglayers, watering, grading to method complete. | 3.5 | Cum | |
5 | 2 | SUB-HEAD : ROOFING AND CEILING WORK | |||
6 | 2.01 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.\n0.63mm thick with zinc coating not less than 275gm/m2 | 31 | Sqm | |
7 | 2.02 | Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862 : 2000 ) with suitable fibre cement screw in ceiling etc. complete (frame work to be paid separately) :\n6 mm thick cement board. | 60.185 | Sqm | |
8 | 2.03 | Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers including a coat of approved steel primer and two coats of approved paint complete.\n0.63mm thick with zinc coating not less than 275gm/m2 | 53 | Mtr | |
9 | 3 | SUB-HEAD : REPAIRS TO BUILDING | |||
10 | 3.01 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on old work (one or more coats), to give an even shade on old work (one or more coats) to give an even shade as required complete as per direction of the Engineer in charge. | 2832.99 | Sqm | |
11 | 3.02 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 3898.28 | Sqm | |
12 | 3.03 | Painting on G.S. sheet with synthetic enamel paint ( one or more coats ) of approved brand and manufacture of required colour to give an even shade on old work including preparation of surface as required complete as per direction of the Engineer in charge:- | 167.4 | Sqm | |
13 | 3.04 | Painting on wood work with oil type wood preservative (one or more coats) of approved brand and manufacture on old work including preparation of surface as required complete as per direction of the Engineer in charge.\n | 564.064 | Sqm | |
14 | 3.05 | Finishing walls with textured exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge.\n | 1065.28 | Sqm | |
15 | 3.06 | Finishing with epoxy paint ( one or more coats ) of approved brand and manufacture at all locations prepared and applied as per manufacturer's specification on old work including preparation of surface etc. as required complete as per direction of the Engineer in charge. | 212.16 | Sqm | |
16 | 3.07 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:- | 1950 | Sqm | |
17 | 3.08 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty\nFloat glass panes of thickness 5.5 mm | 8 | Sqm | |
18 | 4 | SUB-HEAD: FLOORING AND SKIRTING WORK | |||
19 | 4.01 | Providing and laying 1st quality ceramic glazed floor tiles of approved size conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades as approved by Engineer-in-charge over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete .\nAnti-Skid Tiles,\nCeramic Tiles 1st quality 400 x 400mm in all shades and designs. | 85.5 | Sqm | |
20 | 4.02 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. | 79.8 | Sqm | |
21 | 5 | SUB-HEAD: WATER PROOFING AND REHABILITATION WORK | |||
22 | 5.01 | Grading roof for water proofing treatment [Payment shall be made after submission of the product performance shall carry guaranteed for 7 years against any leakage] complete as required as per direction of the Engineer-in-charge with :\n Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) | 5.25 | Cum | |
23 | 6 | SUB-HEAD: WOOD WORK | |||
24 | 6.01 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position.\nKarai Wood | 0.819 | Cum | |
25 | 6.02 | Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished /black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and orglazing as per direction of Engineer-In-Charge.\nLocal teak wood, 30 mm thick shutters,\n | 17.28 | Sqm | |
26 | 6.03 | Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position :\nKarai Wood | 0.75 | Cum | |
27 | 7 | SUB-HEAD : CEMENT CONCRETE WORK | |||
28 | 7.01 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. | 91 | Sqm | |
29 | 8 | SUB-HEAD :BRICK WORK | |||
30 | 8.01 | Half brick masonry with first class bricks in foundation and plinth including cost of all materials as required complete:-\nIn cement mortar 1:4 ( 1 cement : 4 fine sand ). | 39 | Sqm | |
31 | 8.02 | First class brick work in foundation and plinth including cost of all materials as required complete:-\nIn cement mortar 1:5 ( 1 cement : 5 fine sand ). | 6.096 | Cum | |
32 | 8.03 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:-\nIn cement mortar 1:5 ( 1 cement : 5 fine sand ). | 2.54 | Cum | |
33 | 9 | SUB-HEAD: FINISHING WORK | |||
34 | 9.01 | 12 mm cement plaster of mix\nIn cement mortar 1 : 4 ( 1 cement : 4 fine sand ) | 76.11 | Sqm | |
35 | 9.02 | Neat cement punning. | 76.11 | Sqm | |
36 | 9.03 | Providing and applying two coats of fire retardant paint unthinned on cleaned wood/ply surface of required colour of approved brand and manufacture on new work @ 3.5 sqm per litre including preparation of base surface as per recommendation of the manufacturer to make the surface fire returdant. | 64.395 | Sqm | |
37 | 10 | SUB-HEAD: SANITARY INSTALLATIONS | |||
38 | 10.01 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete:\nSemi rigid pipe \n32 mm dia | 40 | Each | |
39 | 10.02 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:\nFlat back wash basin of size 550x400mm | 4 | Each | |
40 | 10.03 | Providing and fixing soil, waste and vent pipes:\n100 mm dia.\nSand cast iron S&S pipe as per IS: 1729. | 25 | Mtr. | |
41 | 10.04 | Providing and fixing heel rest sanitary bend\n100 mm dia.\nSand cast iron S&S pipe as per IS: 1729. | 3 | Each | |
42 | 10.05 | Providing and fixing white vitreous china pedestaltype water closet (European type) with seat and lid, 10litre low level white vitreous china flushing cistern &C.P. flush bend with fittings & C.I.brackets, 40mm\nflush bend, overflow arrangement with specials ofstandard make and mosquito proof coupling ofapproved municipal design complete includingpainting of fittings and brackets, cutting and makinggood the walls and floors wherever required :\n18.3.1 W.C. pan with ISI marked white solid plastic seat and lid. | 2 | Each | |
43 | 10.06 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : \nWhite Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.\n\n | 6 | Each | |
44 | 11 | SUB-HEAD: WATER SUPPLY | |||
45 | 11.01 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.\n Internal work - Exposed on wall. \n15 mm dia. nominal bore\n | 10 | Mtr | |
46 | 11.02 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.\n Internal work - Exposed on wall. \n20 mm dia. nominal bore | 12 | Mtr | |
47 | 11.03 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work \n 25 mm dia. nominal bore | 50 | Mtr | |
48 | 11.04 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work \n 50 mm dia. nominal bore | 20 | Mtr | |
49 | 11.05 | Providing and fixing C.P. brass bib cock of approved qualityconforming to IS:8931\n15 mm nominal bore | 10 | Each | |
50 | 11.06 | Providing and fixing C.P brass stop cock( concealed) of standard design and of approved make conforming to IS : 8931\n15 mm nominal bore | 10 | Each | |
51 | 11.07 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):\n25 mm nominal bore | 10 | Each | |
52 | 11.08 | Providing and fixing gun metal non-return valve of approved quality (screwed end):\n25 mm nominal bore\nHorizontal | 8 | Each | |
53 | 11.09 | Providing and fixing gun metal non-return valve of approved quality (screwed end):\n25 mm nominal bore\nVertical | 8 | Each | |
54 | 11.1 | Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work \n25 mm diameter pipe | 40 | Mtr | |
55 | 12 | SUB-HEAD: MISCELLINEOUS ITEMS | |||
56 | 12.01 | Providing and fixing barak bamboo 75 mm to 100 mm dia posts, post plates, ties, king posts, rafters, runners etc. tied with coir rope complete as per specification. | 450 | Mtr | |
57 | 12.02 | Providing and fixing barak bamboo 75 mm to 100 mm dia posts, runners, struts, bracings, collars etc. fixed with MS nails complete as per specification. | 450 | Mtr | |
58 | 12.03 | Excavating holes upto 0.10 cum including getting out the excavated soil, placing posts, then returning the soil as required in holes in layers not exceeding 200 mm in depth, consolidating each deposited layer by watering and ramming, disposal of surplus excavated soil as directed with all leads and lifts complete as per specification. | 1500 | Per hole | |
59 | 12.04 | Labour charge for fitting fixing of G.I sheet on bamboo frame , tied with GI wire on roofing & walling etc. complete in/c loading of GI sheet required for the work on mechanical transport and unloading at work site in/c dismantling properly & reloading & unloading at the stack yard complete as per direction of the Engineer in charge. | 1000 | Sqm | |
60 | 12.05 | Providing & fixing jai bamboo (2nd class) 85 mm to 100 mm dia and making shoe with end tappered upto 300 mm from the bottom of the bamboo as per drawing and direction of the Engineer in chage. | 6000 | Mtr | |
61 | 12.06 | Costruction of temporary entrance gate with cloth on wooden frame inside bamboo support in/c fitting and fixing complete with lettering as " REPUBLIC DAY" on both side. | 6 | Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail