| 1 | 1 | Taking down rolling shutters of any description and size including anchoring rod, top cover and all fittings complete, including making good the disturbed portion Complete all as per specified and directed. | | 145 | Sqm |
|---|
| 2 | 2 | Cutting holes in brick walls built in cement mortar exceeding half brick but n.exc one brick for inserting hold fasts or similar work and make good the dismantled portion in cement concrete 1:2:4 type B-1 Complete all as per specified and directed. | | 350 | Each |
|---|
| 3 | 3 | S & F steel rolling shutters, with ball bearings 1.00 mm thickness of lath including top cover, anchoring rod, hasp and staple including one shop coat primer, erected in position, gear operated type with bevel gear box including locking arrangement and crank handle as indicated. Complete all as per specified and directed. | | 145 | Sqm |
|---|
| 4 | 4 | S & F in repair mild steel structural work in framed doors of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting etc and to be prepared for hanging or sliding with & including hooks and pintle hinges locking arrangements etc confirmed to Fe 290 (Gde E-165). (Steel sheet covering shall be measured and paid separately) Complete all as per specified and directed. | | 600 | Kg |
|---|
| 5 | 5 | S & F plain mild steel black sheets 1.25 mm thick covering to steel doors cut to size with plain 40 mm lap joints or welded/riveted seams including bending, turning up etc. Complete all as per specified and directed. | | 45 | Sqm |
|---|
| 6 | 6 | Taking down rolling shutters of any description and size including top cover, cleaning the helical wire spring, anchoring rod, guide channels etc and greasing /oiling to all moving parts of rolling shutter including straighting the anchoring rod, braket plate for smooth functioning, replacement of damaged/worn out lath 1.25 mm thick and re-fixing the rolling shutter with top cover and making good the disturbed portion etc. complete all as directed and specified. (NOTE 1 :- The unit quoted rate deemed to be included for minor repairs , welding and replacements of nut & bolts if required. NOTE 2 :- Material Like helical wire spring, anchoring rod, gear box, etc shall be measured and paid in following item given below.) | | 25 | Each |
|---|
| 7 | 7 | Supply only mild steel helical wire spring 45 cm long, 75 mm dia and weighing of each spring not to be less than 2.40 kg. Complete all as per specified and directed. | | 40 | Each |
|---|
| 8 | 8 | Supply only mild steel tube medium grade of 40 mm dia for anchoring rod to rolling shutter including necessary weding to M.S. bracket plate, drilling holes for fixing spring. Complete all as per specified and directed. | | 200 | Kg |
|---|
| 9 | 9 | Supply only mild steel lock plate and handle made out of MS flat iron, including necessary welding. Complete all as per specified and directed. | | 150 | Kg |
|---|
| 10 | 10 | Supply only gear box full set including realignment of connecting rod. Complete all as per specified and directed. | | 20 | Each |
|---|
| 11 | 11 | Supply only MS gear assembly including connecting and fixing the gear box to wall with two numbers hexogonal bolts 10 mm dia. Complete all as per specified and directed. | | 15 | Each |
|---|
| 12 | 12 | Supply only 1.25 mm thick laths in any type of rolling shutters and in any length including all necessary work for satisfactoringly functioning of rolling shutter complete all as specified and directed. | | 50 | Sqm |
|---|
| 13 | 13 | Taking down sliding shutters of any description and size including Channels, rail, cleaning the guide channels etc and greasing /oiling to all moving parts of sliding shutter including straighting the anchoring rod, braket plate for smooth functioning, replacement of damaged/worn out 1.25 mm thick MS steel sheet and re-fixing the sliding shutter with and making good the disturbed portion etc. complete all as directed and specified. (NOTE 1 :- The unit quoted rate deemed to be included for minor repairs , welding and replacements of nut & bolts if required. NOTE 2 :- Material Like Channel , angle rail etc shall be measured and paid in following item given below.) | | 10 | Each |
|---|
| 14 | 14 | Supply only Mild Steel ,laths 1.25 mm thick in any type of sliding shutters and in any length including all necessary work for satisfactry functioning of sliding shutter complete all as specified and directed. | | 20 | Sqm |
|---|
| 15 | 15 | Supply only guide channel, rails, angle etc for smooth functioning of sliding shutter including necessary welding to M.S. bracket plate, drilling holes for fixing complete all as directed and specified. | | 400 | Kg |
|---|
| 16 | 16 | M&L Welding in repairs n. exc 6mm thick metal and n. exc 2.5 cm in length all as specified and directed. | | 300 | Each |
|---|
| 17 | 17 | Dismantaling plain or corrugated AC sheeting any gauge, thickness, including nainital or similar pattern roof covering all as specified and directed. | | 300 | Sqm |
|---|
| 18 | 18 | S&F 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs, walls, with 'L' or 'J' type hooks etc all as specified and directed. | | 300 | Sqm |
|---|
| 19 | 19 | Supply and fix the APP polymeric water proofing membrane of minimum 3mm thickness & weighing not less than 3.6.kg/sqm of Make : 'MOPLY FP' manufactured by M/S STP Taxsa Ltd or HYPER PLAS (Poleyster) manufactured by M/S IWL ltd or SHALIPLAS (Poleyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd or MAKPOLYPLAST manufactued by M/s MK Petro Ltd or TORCH TAR AS APPROVED BY GE, black finished reinforced with non-woven poleyster matt. With a thermofusible finish laid over 1.5 Kg/sqm bitumen grade 85/25 over compatible bitumen primer at the rate of 0.40 kg/sqm torching overlaps with a propane or a butane gas torch with a overlap of 75 mm at the sides and 100 mm at the ends and sealing applying a coat of cold emulsion bituminous primer all as per manufacturers instructions, including taking down existing roof treatment of any description and any thickness and cement mortar screed over and including 15mm thick cement mortar 1:4 plastering over a tack coat of cement slurry using WPC by weight of 3% of cement or as per manufacturing instruction and applying two coat of silver shield bituminus paint over APP, complete all as specified and directed. Note:- (WPC shall be measured under saparate item ) | | 670 | Sqm |
|---|
| 20 | 20 | M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. | | 100 | RM |
|---|
| 21 | 21 | M&L for PCC1:2:4 Type B-0 ( 12.5 mm graded aggregate) cement concrete in roof padding,roof kerbs of mud stops, rounded or chamfered on edges complete all as spcified and directed. | | 23.45 | Cum |
|---|
| 22 | 22 | Supply only Integral water proofing compound complete all as spcified and directed. | | 186.528 | Kg |
|---|
| 23 | 23 | Disconnecting existing tanks, exc 500 & n.exc 1000 ltrs setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position all as specfied and directed by Engr-in-charge | | 5 | Each |
|---|
| 24 | 24 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed | | 550 | Sqm |
|---|
| 25 | 25 | Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed work complete all as specified and directed | | 600 | RM |
|---|
| 26 | 26 | M/L exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid 6mm thick complete all as specified and directed by Engr-in-Charge. (Note : frame work for ceiling shall be measured and paid seperately) | | 150 | Sqm |
|---|
| 27 | 27 | M&L Anodised aluminum snap grid frame work of size 605x605mm for false ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long with complete hanging arrangement and making good at surface all as specified and directed | | 150 | Sqm |
|---|
| 28 | 28 | Except sheeting refixing with screw Pre painted galvatume aluminum zink coating GI based corrugated steel sheet any thickness of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | | 150 | Sqm |
|---|
| 29 | 29 | Taking down eaves gutters and rainwater pipes (any sizee or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) | | 230 | RM |
|---|
| 30 | 30 | S&F Plain, galvanised, mild steel sheeting 1mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 incl nessary welding ,screwing, bending etc complete all as specified and directed by Engr-in-Charge. Note: Hieght of building/ shed is upto 12mtr. Contractor will provide safety arrangements. | | 80 | Sqm |
|---|
| 31 | 31 | S&F PVC (SWR) pipes single socketed 150mm dia in any length with rubber ring joints fixed to walls/ column including all fittings as socket, L/T bend etc complete all as specified and directed by Engr-in-Charge. | | 50 | RM |
|---|
| 32 | 32 | S&F Plain, black, mild steel sheeting1.25 mm thick in ridges, hips valley gutters, drip and straight flashing (length and girth as fixed) all as directed and specified. Note: Hieght of building/ shed is upto 12mtr. Contractor will provide safety arrangements. | | 120 | Sqm |
|---|
| 33 | 33 | M&L preparation new steel Surfaces of any des-cription, over 10cm in width or girth, not otherwise described two coat synthetic enamel paint over a coat of red oxide primer all as directed and specified. | | 1070 | Sqm |
|---|
| 34 | 34 | Dismantling timber scantlings 40 sq. cm and over in section, framed work in any position complete all as specified and directed | | 1.5 | Cum |
|---|
| 35 | 35 | M & L Plain fillets, square, rectangular or traingular in secction, clean sawn, secured with mills or borads, exc 6 mm and n exc 13 mm complete all as specified and directed | | 600 | RM |
|---|
| 36 | 36 | M & L 6mm thick Asbestos cement plain building boards, fixed to timber framework with screws in cieling complete all as specified and directed | | 400 | Sqm |
|---|
| 37 | 37 | M&L Second class hard-wood in scantlings clean sawn fixed in reparis, to replace old and decayed timber (including piecing, scarfing, etc., complete all as specified and as directed. | | 1.5 | Cum |
|---|
| 38 | 38 | Taking down chowkhat with shutters with out taking off shutters from the frame n.exc 1.5 Sqm each complete all as specified and directed | | 20 | Each |
|---|
| 39 | 39 | Taking down chowkhat with shutters with out taking of shutters from the frame exc1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed | | 60 | Each |
|---|
| 40 | 40 | Taking down shutters of any description n.exc 1.00 sqm each complete all as specified and directed. | | 10 | Leaf |
|---|
| 41 | 41 | Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 square metre and re-fixing in same opening including renewal of screws complete , all as specified and directed by Engineer-in Charge. | | 15 | Per Leaf |
|---|
| 42 | 42 | Taking down shutters of any description exc 1.00 sqm but n.exc 2 sqm each complete all as specified and directed. | | 45 | Leaf |
|---|
| 43 | 43 | S&F Glazed and skeleton shutters, open rebated and 35mm thick 2nd class hardwood prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats etc complete all as specified and directed. | | 40 | Sqm |
|---|
| 44 | 44 | Ditto as item No.14 but divided into squared 30 mm thick for window, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers and sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (b);etc complete all as specified and directed. | | 5 | Sqm |
|---|
| 45 | 45 | S&F35 mm thick 2nd class hardwood plain framed panelled shutters (two panel ) with lock rail and panels of 9mm CWR plywood. The size of rail and stile as per IS 1003 (Qart I), klin seasoned and chemically pressure treated complete all as specified and directed. | | 40 | Sqm |
|---|
| 46 | 46 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed | | 30 | Sqm |
|---|
| 47 | 47 | S&F box type mild steel windows glazed / gauzed incl frame made of hollow sections 60 x 25 x 1.25 mm thick 50 x 20 mm x 1.25 mm thick MS Hollow pipes as in windows shutter with or with out sash bars incl 150 mm size MS tower bolts 2 No each leaf, MS handle made of Z section 100 mm long 2 Nos each leaf, mild steel cheat 55 mm x 25 mm x 75 mm long 2 Nos each leaf, mild steel cleat 55 mm x 25 mm x 75 mm long, MS Pintel hing 75 mm long 14 mm dia 02 Nos each leaf complete all as specified and directed. | | 20 | Sqm |
|---|
| 48 | 48 | S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed | | 35 | Sqm |
|---|
| 49 | 49 | S&F, in repairs, Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. | | 70 | Sqm |
|---|
| 50 | 50 | S&F butt hinges med weight cold rolled MS, size 100 mm complete all as specified and directed. | | 210 | Each |
|---|
| 51 | 51 | S&F butt hinges med weight cold rolled MS, size 75 mm complete all as specified and directed. | | 20 | Each |
|---|
| 52 | 52 | S&F 150mm long Mild steel barrel tower bolts, stove enamellled black, with bright bolt and fixed complete all as specified and directed. | | 140 | Each |
|---|
| 53 | 53 | S&F 150mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. | | 140 | Each |
|---|
| 54 | 54 | S & F 300 mm long Mild steel sliding door bolts plate type, store enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. | | 40 | Each |
|---|
| 55 | 55 | S&F, in repair, ordinary rat tail rod pattern spring incl roller and roller plate complete 300mm of mild steel incl necessary welding for fixing arrangement etc complete all as specified and directed. | | 15 | Each |
|---|
| 56 | 56 | Supply and fixing of aluminium door powder coated of extrusion aluminium section, consisting of frame vertical and horizontal members of size 100mmx45mmx2.5mm thick with shutter style 85mm x 45mm x2.50mm thick, Top, middle and bottom rial of size 101.60mmx44.50 and meeting style 47.50mmx44.50mm thick with 5.50mm thick tinted sheet glass of modi guard/Atul or 6mm this aluminium board with aluminium bedding and rubber gasket/beading including fixing of hydraulic floor spring one in single leaf or two nos in double leaf door of Make Kelvin/Evershine. One mortice lock for aluminium door (each) and two aluminium tower bolts for each door with suitable door handle ornament type with hinges 100 mm long complete . Fixed with rawl plug including taking down old doors and rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. Note: 5.5mm thick tinted glass or 12mm thick prelaminated particle board will be measured and paid for separetetly under repective items. | | 20 | Sqm |
|---|
| 57 | 57 | Supply and fix aluminum powder coated three track sliding window with frame and two no's glazed shutter and one no's gauzed shutter/Ventilator shutters side hung type with or without sash bar, locking rails, locking arrangements with frames including necessary joinery, cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, suitable handle, tower bolt, hinges and glazing of 5.5mm thick size. Size of top rail, bottom rail shall be 44.45mmx44.45mm and size of frame shall be 65mmx44.45mm and thickness of aluminum 2.50mm thick inclduing taking dwon of old windows complete all as specified in MES SSR-1991, Part-I complete all as specified and directed. Note:5.5mm thick tinted glass or wire mesh will be measured and paid for separetetly under repective items. | | 20 | Sqm |
|---|
| 58 | 58 | S&F glazing of tinted glass 5.5mm thick in aluminium door window shutters and partitions etc with PVC/neoprene gasket etc Complete all as per specified and directed by Engr-in-Charge. | | 32 | Sqm |
|---|
| 59 | 59 | M&L for powder coated aluminium grill of powder coating of minimum 50 micron with aluminium mesh of sze 50x50mm with square tube solid 6mm thick including aluminium channel of size thickness of channel 1.5mm complete all as specified and directed. | | 20 | Sqm |
|---|
| 60 | 60 | Supply and fix door closer hydraulically regulated,of aluminium(Die cast) body universal type suitable for door shutters 851 to 1000mmin width and weight between 38 to 60kg of Hydraulic door closer complete all as specified and directed. | | 10 | Each |
|---|
| 61 | 61 | S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, as specified. | | 190 | RM |
|---|
| 62 | 62 | S&F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20 mmcomplete all as specified and directed | | 65 | Sqm |
|---|
| 63 | 63 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toto Fe.290.Gde-E-165 complete all as specified and directed. | | 300 | Kgs |
|---|
| 64 | 64 | S&F 100mm long aluminium barrel tower bolt complete all as specified and directed. | | 80 | Each |
|---|
| 65 | 65 | S&F 100mm long aluminium pressed handle complete to fix complete all as specified and directed. | | 80 | Each |
|---|
| 66 | 66 | S&F 300 mm length Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed | | 5 | Each |
|---|
| 67 | 67 | S & F in repair 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and otherside balancing white as in shelf for Cup board complete all as specified and directed. | | 20 | Sqm |
|---|
| 68 | 68 | S & F for Extra over item of block board or veneered particle board18/19 mm thick for external teak wood lipping, 6mm thick, fixed with nails etc complete all as specified and directed. | | 30 | RM |
|---|
| 69 | 69 | S&F mild steel continuous piano hinges brightfinish or electrogalvinised width of flap 40 mm complete all as specified and directed. | | 15 | RM |
|---|
| 70 | 70 | S&F magnatic catcher to hold the cup board shutters complete all as specified and directed | | 20 | Each |
|---|
| 71 | 71 | M&L two coats of synthetic enamel paint over one coat of primer on new wooden surfaces including preparation of surfaces exc. 10 cm width or girth all as specified. | | 200 | Sqm |
|---|
| 72 | 72 | M&L for rendering 15mm thick in CM 1:6 other than fair faces of brick/concrete surfaces finished fair and even without using extra cement incl taking down cement plaster on brick/stone walls complete all as specified and as directed. | | 300 | Sqm |
|---|
| 73 | 73 | M&L for rendering 15 mm th in CM 1:4 on the fair faces of brick wall and finishing fair and even without using extra cement incl taking down cement plaster on brick/stone walls complete all as specified and directed by Engr-in-Charge. | | 200 | Sqm |
|---|
| 74 | 74 | M&L for rendering 10mm thick in CM 1:3 on any faces of concrete surfaces finished fair and even without using extra cement in ceiling/ chajja incl taking down cement plaster on brick/stone walls complete all as specified and as directed. | | 50 | Sqm |
|---|
| 75 | 75 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of birla white putty over a coat of primer complete all as specified and directed. | | 300 | Sqm |
|---|
| 76 | 76 | M&L preparing newly plastered surfaces and applying two coats of cement base paint over a coat of primer on wall complete all as specified and as directed . | | 200 | Sqm |
|---|
| 77 | 77 | M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. | | 50 | Sqm |
|---|
| 78 | 78 | Supply and fixing 3 mm thick plain sheet glass ordinary sheet glass and glazing with oil putty complete in squares no exc 0.50 Sqm each pane complete all as specified and as directed. | | 7 | Sqm |
|---|
| 79 | 79 | Supply and fixing in repairs 3 mm thick plain sheet glass ordinary sheet glass and glazing with oil putty complete in squares no exc 0.50 Sqm each pane incl hacking out old broken glass (any thickness, size, quality or discription) complete all as specified and as directed. | | 40 | Sqm |
|---|
| 80 | 80 | Supply and fixing in repairs 3 mm thick frosted sheet glass ordinary and glazing with oil putty complete in squares no exc 0.50 Sqm each pane incl hacking out old broken glass (any thickness, size, quality or discription) complete all as specified and as directed. | | 10 | Sqm |
|---|
| 81 | 81 | M&L for preparing surface of wood and wood baed materials, new or old, of any description and girth, not otherwise described and treated with two coat cerosoting complete all as specified and as directed. | | 400 | Sqm |
|---|
| 82 | 82 | M&L for preparing wooden surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying two coat synthetic enamel paint over a coat of primer complete all as specified and as directed. | | 60 | X RM |
|---|
| 83 | 83 | Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - Rs.64500.00 | | | |
|---|
