Rajasthan State Road Development And Construction Corporation Limited has published Remaining Work Of Construction Of Building For State Of Art Capacity Building And It Training Centre And Help Desk At Head Office Of Commercial Taxes Department , Jaipur . Remaining Work Of Construction Of Building For State Of Art Capacity Building And. Submission Date for this Tender is 29-06-2020. Building Work Tenders in Commercial Taxes Department, Jaipur Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work: Remaining work of Construction of Building for State of Art "Capacity Buiildingand IT Training Centre" and Help Desk at Head Office of Commercial Taxes Department, Jaipur (Excluding cost of cement) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | PART "A": CIVIL WORK Rates are based on PWD city Circle, Jaipur BSR-2016 | 0.0001 | hect. | |
| 2 | 1.02 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils | 1025.83 | Cum | |
| 3 | 1.03 | Add extra for foundation/trenches/drains for every additional lift of 1.5 Mtr. or part thereof in. All kinds of soil | 2160 | Cum | |
| 4 | 1.04 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. | 744.95 | Cum | |
| 5 | 1.05 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | 16.16 | Cum | |
| 6 | 1.06 | Providing & fixing precast cement concrete coping 1 : 2 : 4 mix 50mm thick complete as per specification : | 58 | Sqm | |
| 7 | 1.07 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. | 355.4 | Sqm | |
| 8 | 1.08 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : | 0.0001 | hect. | |
| 9 | 1.09 | Cornices and mouldings | 10 | Sqm | |
| 10 | 1.1 | Grid roofing with panel area less than 2.25 Sqm. (contact area to be measured). | 24.07 | Sqm | |
| 11 | 1.11 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) | 15282.9 | Kg | |
| 12 | 1.12 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.\nM20 grade Nominal Mix / Design Mix | 66.72 | Cum | |
| 13 | 1.13 | Add extra for providing richer mixes respectively at all floor levels. Providing M-25 grade concrete by using min 410 kg of cement per cum instead of M-20 grade design mix. | 66.72 | Cum | |
| 14 | 1.14 | Brick work with F.P.S. bricks of class designation 100 in superstructure above plinth level upto floor V level in all shapes and sizes in : \nCement mortar 1 : 4 (1 cement : 4 coarse sand) | 86.25 | Cum | |
| 15 | 1.15 | Add extra for Square or Rectangular Pillars in Superstructre brick work up to five storey upto 45 cm length and all sides are free | 30 | Cum | |
| 16 | 1.16 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 100. Cement mortar 1 : 4 (1 cement : 4 coarse sand) | 17.45 | Sqm | |
| 17 | 1.17 | Add extra providing and placing in position 2 Nos. ,6mm Ø M.S. bar at every third course of half brick masonry . | 17.45 | Sqm | |
| 18 | 1.18 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). | 25.45 | Cum | |
| 19 | 1.19 | Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. OR | 0.0001 | hect. | |
| 20 | 1.2 | Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. | 0.0001 | hect. | |
| 21 | 1.21 | Rajnagar 1st quality/Ageria with light spots. | 0.0001 | hect. | |
| 22 | 1.22 | 1501 Cm2 to 3600 Cm2 Tiles | 30 | Sqm | |
| 23 | 1.23 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. | 0.0001 | hect. | |
| 24 | 1.24 | Jhunjhunu / Jalore (Red / Choclate Colour) | 0.0001 | hect. | |
| 25 | 1.25 | Above 3601 Cm2 Slabs | 3.37 | Sqm | |
| 26 | 1.26 | Green / Black | 0.0001 | hect. | |
| 27 | 1.27 | Above 3601 Cm2 Slabs | 235.26 | Sqm | |
| 28 | 1.28 | Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | 0.0001 | hect. | |
| 29 | 1.29 | Marble work | 89 | Rmt | |
| 30 | 1.3 | Granite Work | 755 | Rmt | |
| 31 | 1.31 | Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete | 16 | Each opening | |
| 32 | 1.32 | Extra in marble flooring work for upto 50 mm wide strip of Green/White/ Jaisalmer stone in flooring work as per direction of Engineer in Charge | 89 | Rmt | |
| 33 | 1.33 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). | 590 | Sqm | |
| 34 | 1.34 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). | 139.592 | Sqm | |
| 35 | 1.35 | Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles. | 590 | Sqm | |
| 36 | 1.36 | Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in MAT finished tiles. | 139.592 | Sqm | |
| 37 | 1.37 | Extra for using size above 200x300mm in glazed tiles. | 590 | Sqm | |
| 38 | 1.38 | Extra for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. | 139.592 | Sqm | |
| 39 | 1.39 | Providing and fixing 75 mm wide Decorative Border in different shades and in all coloures in glazed tiles laid over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. | 265 | Rmt | |
| 40 | 1.4 | P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 900 mm X 900 mm | 780 | Sqm | |
| 41 | 1.41 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 35 mm thick .Commercial Veneer both side | 85 | Sqm | |
| 42 | 1.42 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. | 85 | Sqm | |
| 43 | 1.43 | Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area of the shutter to be measured). | 85 | Sqm | |
| 44 | 1.44 | Extra for providing other type of fittings as mention in annexure A ( as approved by EI) : Stainless steel fittings | 85 | Sqm | |
| 45 | 1.45 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. | 9 | Each | |
| 46 | 1.46 | Providing Single leaf shutter instead of double leaf. | 85 | Sqm | |
| 47 | 1.47 | Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry : Size 100x 75mm | 24 | Mtr. | |
| 48 | 1.48 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide | 5650 | Kg | |
| 49 | 1.49 | Extra if square,rectangular hollow tubelar sections are used or grill made by flats only | 450 | Kg | |
| 50 | 1.5 | Painting top of roofs with bitumen of approved quality at 17kg per 10 sum impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete:\nWith residual type petroleum bitumen of penetration 80/100 | 37.66 | Sqm | |
| 51 | 1.51 | Grading roof for water proofing treatment with water proffing compound, Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | 17.22 | Cum | |
| 52 | 1.52 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : | 130 | Rmt | |
| 53 | 1.53 | Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete. | 16 | Each | |
| 54 | 1.54 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm Thick. | 535.49 | Sqm | |
| 55 | 1.55 | Making grooves as per design in plaster 10mm to 20mm wide. | 2200 | Rmt | |
| 56 | 1.56 | Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design | 113.2 | Rmt | |
| 57 | 1.57 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete | 1835.49 | Sqm | |
| 58 | 1.58 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: \nTwo or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. | 5780.57 | Sqm | |
| 59 | 1.59 | Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat. Trowel Finish av. thickness 1000 to 1200 microns. | 1767.84 | Sqm | |
| 60 | 1.6 | Applying priming coat : With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. | 357.2 | Sqm | |
| 61 | 1.61 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : \n Two or more coats on new work | 357.2 | Sqm | |
| 62 | 1.62 | Precast terrazo tiles of approved make, 20mm thick with marble chips of size upto 6mm laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 20mm thick bed of cement sand mortar 1 : 4.\nDark shade using ordinary cement. | 800 | Sqm | |
| 63 | 1.63 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). | 0.0001 | hect. | |
| 64 | 1.64 | For fixed portion. Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) | 512.7 | Kg | |
| 65 | 1.65 | For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) | 1287 | Kg | |
| 66 | 1.66 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) | 95 | Sqm | |
| 67 | 1.67 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate | 16 | Each | |
| 68 | 1.68 | Filling the gap upto 5 mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. | 850 | Rmt | |
| 69 | 1.69 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | 24 | Each | |
| 70 | 1.7 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) | 51.5 | Sqm | |
| 71 | 1.71 | Providing and fixing vertical Blinds , headrail shall be oriented aluminum alloy 50 mm vide x 18 mm high the thickness shall be 1.2 mm. Control unit shall be made of high grade polymer and shall be housed in side the headrail, which shall transfer motion from chain tilter to tilt rod. Chain tilter shall be made of plastic bead of diameter 4.5 mm through which 2 mm thick polyester code passes. Tilt rod shall be extruded aluminum having 3 key ways. Runner shall be moulded plastic and shall have to plastic wheels mounted on plastic exles to enable runner to slide unhindered in headrail. Luver shall be made of fabric 100 mm colour fast and shall have protective scotchgard coating to resist stains and dust. Bottom mechanism consist bottom weight made of powder coated galvanized steel for maximum corrosion resistance. The bottom weight shall be attached with bottom. | 65 | Sqm | |
| 72 | 1.72 | Providing and fixing calcium silicate perforated board false ceiling at all heights including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the calcium silicate board with ceiling section | 0.0001 | hect. | |
| 73 | 1.73 | and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but but excluding the cost of painting of thickness of calcium silicate board as below:- | 0.0001 | hect. | |
| 74 | 1.74 | 8 mm thick | 1350 | Sqm | |
| 75 | 1.75 | Providing and applying Melamine polish on teak wood work of approved brand and manufacture to give an even shade with two or more coats by compressor including sand papering, wood filler coat etc complete in all respect: New Surface | 350 | Sqm. | |
| 76 | 1.76 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. | 25 | Sqm. | |
| 77 | 1.77 | Providing and laying M30 grade controlled cement concrete pavements including mixing and vibrations concrete with necessary needle vibrators and surface with screed board vibrating complete in all respect with 20/25 mm stone aggregate (crusher broken) including anti-skid textured finish to required camber/ super lavation and grade including curing etc. as per specification with cement concrete M-30 grade including cost of Steel frame work for sides of C.C. pavement consisting of M. S. channels flats and angles with required steel pegs ( some of them may left embedded in concrete/ including providing frame work\n | 59.84 | Cum | |
| 78 | 1.78 | Extra for vacuum processed concrete including cost of equipments labour etc. | 1.76 | Sqm.. | |
| 79 | 1.79 | Cutting of construction joint/ longitudinal joint 4 to 6 mm. wide using mechanical concrete cutter including cost of diamond bit cutting wheel and filling of bitumen sealing compound in groove including cost of sealing compound. | 0.0001 | hect. | |
| 80 | 1.8 | 50 mm depth | 845 | P Mtr. | |
| 81 | 1.81 | Providing and fixing designer cement concrete polished tiles over 20mm average thick base of CM 1 :4 (1 Cement : 4 sand) jointing with cement mortar 1 :2 ( 1cement : 2 sand) with pigment to match the shade of the tiles complete with all respect. | 220 | Sqm | |
| 82 | 1.82 | Providing and fixing 25 mm thick Non slippery reflective type designer paving tile with metallic hardening using 2 Kg/sq.mtr made out of cement concrete of required grade, sizes of tile upto 300X300 mm Manufactured with wet cast Vibration system in two layers and laid over base of 20 mm thick cement morter1:4 using neat cement slurry in cluding finishing of joints etc. complete. | 0.0001 | hect. | |
| 83 | 1.83 | Using M-40 grade cement Concrete | 50 | Sqm | |
| 84 | 1.84 | Driven precast true and vertical R.C.C piles complete as per drawing and technical specification.[MoRTH Specification : Section : 1100,1600,1700 (N)]\n450mm Dia piles (excluding reinforcement)\nConcrete M30 in R.C.C (Design mix) | 24 | Meter | |
| 85 | 1.85 | Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade :\nNigeria teak wood Grade - I. | 0.6 | Cum | |
| 86 | 1.86 | Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using :\nISI 9 mm teak ply one side BWR | 250 | Sqm. | |
| 87 | 1.87 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. \n50x50mm (base and height) | 300 | Rmt. | |
| 88 | 1.88 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint\nExtra for double leaf shutters. | 2.5 | Sqm. | |
| 89 | 1.89 | Providing and fixing of UPVC Sliding windows manufactured in ISO 9001:2000 & 14001:2004 certified company. Frame : Made from the Extruded uPVC Window Profile Section of size 80 x 52mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2mm thick G/J/U/O TYPE GI section. Frame shall have three track configuration, two for sliding of window shutter and one for mosquito mesh shutter. Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. \n | 0.0001 | hect. | |
| 90 | 1.9 | Shutter : The shutter of sliding window shall be made of 54 x 38mm Extruded 3 box multi-chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.25mm (+/- 0.2mm) provided with reinforcement of 1.2mm thick G/J/U/O TYPE GI section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing bead of size 20.5 x 16mm with ‘K’ & ‘O’ type inner and outer EPDM weather seal gaskets alongwith 5mm thick ISI make plain float glass. Mesh shutter (optional) shall be made of 52 x 21.5mm Extruded 3 box multi-chamber uPVC Window Profile Section of white colour having outer wall thickness of 2mm (+/- 0.2mm) provided with reinforcement of 1.2mm thick U TYPE GI section duly mitered cut & thermal welded at all corners and fitted with nylon/polymer mesh and rollers/pully.\n | 0.0001 | hect. | |
| 91 | 1.91 | With mesh shutter | 10 | Sqm | |
| 92 | 1.92 | Carriage of Building Rubbish Stone metal (Grit and ballast etc.) Lead upto 10 Km. | 124 | Cum. | |
| 93 | 1.93 | Non- BSR Item | 0.0001 | hect. | |
| 94 | 1.94 | Providing and fixing wooden paneling on entrance of gates around the pressed steel door & frame with Jams on wall (including all finish) with 12mm thick water proof ply and 4mm thick veener of approved design, colour shade and melamine polish with outer tapper wooden beading 25mm x 25mm complete all as per specification and instruction of Enginee-in-charge. | 160 | Sqm. | |
| 95 | 1.95 | Providing and fixing 1mm thick Mica ISI mark superior quality back side toilet door with all T & P adhesive and pasting tap including removing of tap and cleaning with all respect all as per instruciton of Engineer-in-charge. | 25 | Sqm. | |
| 96 | 1.96 | Providing and fixing decorative polished mirror frame 37mmx25mm beading decorative | 40 | Rmt. | |
| 97 | 1.97 | Providing and fixing Mortice Lock made out of superior quality brass heavy duty with designer handle complete. | 20 | Each | |
| 98 | 1.98 | Providing and fixing M.S. clamps madeout of angles of 40mm x 40mm x5mm in 200 mm to 250 mm wide & 650 to 750 mm in depth vertically suspended with existing slab/beams including cost of required dash fastners of 8 to10mm dia & 65 to 75mm. Long including cost of drilling & fixing making good the surface complete as per design drawings, specifications & direction of Engineer-in-charge. | 30 | Each | |
| 99 | 1.99 | Making holes in full depth of existing RCC slab of dia 110mm to 150mm by means of mechanical core cutter without damaging the structure & making good the slab/floor in all respect. | 14 | Each | |
| 100 | 2 | Providing and fixing 4mm thick Veneer of approved design coloured on flush external board solid core in single leaf shutter including rubbing of paint of flush door & opening and refixing with fittings etc. complete. | 85 | Sqm. | |
| 101 | 2.01 | Supply & Fixing roller blinds made out of imported fabric including roller mechanism and lock with chain system with all necessary hooks etc. complete as per direction and sample approved by Engineer-in-charge. (Vista or equivalent make). | 150 | Sqm. | |
| 102 | 2.02 | PART-"B"SANITARY WORK | 0.0001 | hect. | |
| 103 | 2.03 | P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: | 0.0001 | hect. | |
| 104 | 2.04 | Size 580x440mm. | 8 | Each | |
| 105 | 2.05 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: | 0.0001 | hect. | |
| 106 | 2.06 | WVC with C.P. brass bend. | 12 | Each | |
| 107 | 2.07 | P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm. | 0.0001 | hect. | |
| 108 | 2.08 | Makrana `Adanga` or Raj Nagar 1St Quality White or Andhi Indo-Italian marble. | 11 | Each | |
| 109 | 2.09 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, \n1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & \n32 mm C.P. brass waste coupling of approved make,\n25 mm G.I. waste pipe complete including cutting & making good the wall.: | 0.0001 | hect. | |
| 110 | 2.1 | Size 630 mm x 500 mm dia for counter top | 14 | Each | |
| 111 | 2.11 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor : | 0.0001 | hect. | |
| 112 | 2.12 | 1.0 mm thick Salem stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling. | 0.0001 | hect. | |
| 113 | 2.13 | Overall size Bowl size | 0.0001 | hect. | |
| 114 | 2.14 | (inches) (inches) | 0.0001 | hect. | |
| 115 | 2.15 | 45 x 20 x 8 20x16x8 (with drain board) | 3 | Each | |
| 116 | 2.16 | 1.0 mm thick Salem stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling. | 0.0001 | hect. | |
| 117 | 2.17 | C.P Brass 40 mm | 1 | Each | |
| 118 | 2.18 | P& F waste Coulping with fittings of approved quality /make: | 0.0001 | hect. | |
| 119 | 2.19 | C.P Brass 40 mm | 20 | Each | |
| 120 | 2.2 | P & F Extension Pipe for bib cocks of approved quality/make. | 0.0001 | hect. | |
| 121 | 2.21 | C.P. brass of Heavy & Superior quality 50x15mm | 120 | Each | |
| 122 | 2.22 | C.P. brass of Heavy & Superior quality 100x15mm | 120 | Each | |
| 123 | 2.23 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. | 20 | Each | |
| 124 | 2.24 | Providing & fixing C.P.flange for 15mm dia taps. | 18 | Each | |
| 125 | 2.25 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: | 0.0001 | hect. | |
| 126 | 2.26 | Exposed on wall | 0.0001 | hect. | |
| 127 | 2.27 | 15mm dia nominal bore | 0.0001 | hect. | |
| 128 | 2.28 | 'B' Class | 922 | Mtr. | |
| 129 | 2.29 | 25mm dia nominal bore | 0.0001 | hect. | |
| 130 | 2.3 | 'B' Class | 800 | Mtr. | |
| 131 | 2.31 | Concealed pipe in wall including painting with anticorrosive bitumen paint | 0.0001 | hect. | |
| 132 | 2.32 | 15mm dia nominal bore | 0.0001 | hect. | |
| 133 | 2.33 | 'B' Class | 700 | Mtr | |
| 134 | 2.34 | 20mm dia nominal bore | 0.0001 | hect. | |
| 135 | 2.35 | 'B' Class | 650 | Mtr | |
| 136 | 2.36 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. | 0.0001 | hect. | |
| 137 | 2.37 | 15mm dia nominal bore | 0.0001 | hect. | |
| 138 | 2.38 | 'B' Class | 500 | Mtr | |
| 139 | 2.39 | 25mm dia nominal bore | 0.0001 | hect. | |
| 140 | 2.4 | 'B' Class | 399 | Mtr. | |
| 141 | 2.41 | 50mm dia nominal bore | 0.0001 | hect. | |
| 142 | 2.42 | 'B' Class | 40 | Mtr. | |
| 143 | 2.43 | Making connection of G.I. distribution branch with G.I. main including all fitting. | 0.0001 | hect. | |
| 144 | 2.44 | Upto 25mm dia | 7 | Each | |
| 145 | 2.45 | Beyond 25mm & upto 100mm dia | 8 | Each | |
| 146 | 2.46 | P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete : | 0.0001 | hect. | |
| 147 | 2.47 | Brass wt.400 gm,15mm. | 4 | Each | |
| 148 | 2.48 | P & F 15 mm. Dia Connection Pipe of approved quality/make : | 0.0001 | hect. | |
| 149 | 2.49 | PVC pipe with C.P. Brass nuts upto length, 450mm | 72 | Each | |
| 150 | 2.5 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : | 0.0001 | hect. | |
| 151 | 2.51 | Gun-metal 15mm nominal bore. | 20 | Each | |
| 152 | 2.52 | (-do-) 25mm nominal bore. | 20 | Each | |
| 153 | 2.53 | P & F Gun-metal Non-return Valve or Check Valve (IS :Make) of approved make, superior quality: | 0.0001 | hect. | |
| 154 | 2.54 | 25mm nominal bore. | 0.0001 | Sqm | |
| 155 | 2.55 | Vertical | 10 | Each | |
| 156 | 2.56 | 50mm nominal bore. | 0.0001 | hect. | |
| 157 | 2.57 | Horizontal | 10 | Each | |
| 158 | 2.58 | Vertical | 10 | Each | |
| 159 | 2.59 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: | 0.0001 | hect. | |
| 160 | 2.6 | 1000 litres capacity. | 4 | Each | |
| 161 | 2.61 | 2000 litres capacity. | 4 | Each | |
| 162 | 2.62 | Hoisting Charges for each floor : | 0.0001 | hect. | |
| 163 | 2.63 | For items 2.26.5 to 2.26.8 | 16 | Each | |
| 164 | 2.64 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : | 0.0001 | hect. | |
| 165 | 2.65 | 15mm dia nominal bore | 120 | Each | |
| 166 | 2.66 | 25mm dia nominal bore | 65 | Each | |
| 167 | 2.67 | 50mm dia nominal bore | 28 | Each | |
| 168 | 2.68 | Providing and fixing Superior quality (Jaguar Contiental) CP Brass fittings of approved make as per direction of Engineer-in-charge | 0.0001 | hect. | |
| 169 | 2.69 | Swan neck pillar cock 15 mm nominal size | 16 | Each | |
| 170 | 2.7 | Bib Cock with long thread 15 mm nominal size | 48 | Each | |
| 171 | 2.71 | Long body Bib Cock 15 mm nominal size | 24 | Each | |
| 172 | 2.72 | Two way Bib Cock 15 mm nominal size | 10 | Each | |
| 173 | 2.73 | Angular stop cock with long thread 15 mm nominal size | 86 | Each | |
| 174 | 2.74 | Stop cock with reduced body | 50 | Each | |
| 175 | 2.75 | Concealed stop cock 15 mm nominal size | 180 | Each | |
| 176 | 2.76 | Sink cock with swinging casted spout (table mounted ) 15 mm nominal size | 2 | Each | |
| 177 | 2.77 | Single lever wash basin mixer with 450 mm long copper connection pipe | 10 | Each | |
| 178 | 2.78 | Central hole basin mixer | 22 | Each | |
| 179 | 2.79 | 600 mm long towel rail | 20 | Each | |
| 180 | 2.8 | Revolving type towel ring | 20 | Each | |
| 181 | 2.81 | Soap dish | 26 | Each | |
| 182 | 2.82 | Double coat hook | 20 | Each | |
| 183 | 2.83 | Paper holder | 26 | Each | |
| 184 | 2.84 | Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete | 2 | Each | |
| 185 | 2.85 | Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc, complete. | 0.0001 | hect. | |
| 186 | 2.86 | 250mm dia | 88.35 | Mtr. | |
| 187 | 2.87 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size) all around S.W. pipe including 15 Cm. thick bed concrete (Width W= Diameter of pipe in Cm+30 Cm.)( Excluding cost of pipe) | 0.0001 | hect. | |
| 188 | 2.88 | 100mm dia S.W. pipe | 260 | Mtr. | |
| 189 | 2.89 | 150mm dia S.W. pipe | 149.85 | Mtr. | |
| 190 | 2.9 | 250mm dia S.W. pipe | 158.5 | Mtr. | |
| 191 | 2.91 | Providing & fixing S.W. square mouth Gully trap `A` grade (ISI marked) of approved make & design in existing man-hole. | 0.0001 | hect. | |
| 192 | 2.92 | Size 100 X 100mm | 2 | Each | |
| 193 | 2.93 | Size 150 X 100mm | 2 | Each | |
| 194 | 2.94 | P & F Square-mouth gully trap `A` grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. | 0.0001 | hect. | |
| 195 | 2.95 | Trap size 225 X 150mm, ferrow cement cover with frame internal chamber size 450 X 450mm. | 2 | Each | |
| 196 | 2.96 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. | 0.0001 | hect. | |
| 197 | 2.97 | 75 mm dia | 214 | Mtr | |
| 198 | 2.98 | 110 mm dia | 145.5 | Mtr | |
| 199 | 2.99 | 160 mm dia | 180 | Mtr | |
| 200 | 3 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: | 0.0001 | hect. | |
| 201 | 3.01 | Coupler (socket) | 0.0001 | hect. | |
| 202 | 3.02 | 75mm dia | 160 | Each | |
| 203 | 3.03 | 110mm dia | 257 | Each | |
| 204 | 3.04 | 160 mm dia | 120 | Each | |
| 205 | 3.05 | Plain Tee | 0.0001 | hect. | |
| 206 | 3.06 | 75mm dia | 30 | Each | |
| 207 | 3.07 | 110mm dia | 85 | Each | |
| 208 | 3.08 | 160 mm dia | 72 | Each | |
| 209 | 3.09 | Door Tee | 0.0001 | hect. | |
| 210 | 3.1 | 75mm dia | 55 | Each | |
| 211 | 3.11 | 110mm dia | 50 | Each | |
| 212 | 3.12 | 160 mm dia | 32 | Each | |
| 213 | 3.13 | Door 'Y' | 0.0001 | hect. | |
| 214 | 3.14 | 75mm dia | 60 | Each | |
| 215 | 3.15 | 110mm dia | 60 | Each | |
| 216 | 3.16 | 160 mm dia | 60 | Each | |
| 217 | 3.17 | Bend 45 | 0.0001 | hect. | |
| 218 | 3.18 | 75mm dia | 60 | Each | |
| 219 | 3.19 | 110mm dia | 120 | Each | |
| 220 | 3.2 | 160 mm dia | 40 | Each | |
| 221 | 3.21 | Bend 87 .5 | 0.0001 | hect. | |
| 222 | 3.22 | 75mm dia | 60 | Each | |
| 223 | 3.23 | 110mm dia | 60 | Each | |
| 224 | 3.24 | 160 mm dia | 40 | Each | |
| 225 | 3.25 | Door Bend (Top Side) | 0.0001 | hect. | |
| 226 | 3.26 | 75mm dia | 70 | Each | |
| 227 | 3.27 | 110mm dia | 70 | Each | |
| 228 | 3.28 | 160 mm dia | 45 | Each | |
| 229 | 3.29 | Vent Cowel | 0.0001 | hect. | |
| 230 | 3.3 | 75mm dia | 45 | Each | |
| 231 | 3.31 | 110mm dia | 50 | Each | |
| 232 | 3.32 | 160 mm dia | 30 | Each | |
| 233 | 3.33 | Pipe Clip | 0.0001 | hect. | |
| 234 | 3.34 | 75mm dia | 100 | Each | |
| 235 | 3.35 | 110mm dia | 240 | Each | |
| 236 | 3.36 | 160 mm dia | 120 | Each | |
| 237 | 3.37 | Plain floor trap | 0.0001 | hect. | |
| 238 | 3.38 | 110mm dia | 120 | Each | |
| 239 | 3.39 | Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. | 0.0001 | hect. | |
| 240 | 3.4 | Depth up to 0.5 M | 15 | Each | |
| 241 | 3.41 | Add extra over item 3.20.1 for every additional 0.10m depth above 0.5 m depth. | 60 | Each | |
| 242 | 3.42 | Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design : | 0.0001 | hect. | |
| 243 | 3.43 | Depth up to 1.5 M | 18 | Each | |
| 244 | 3.44 | Add extra over item 3.21.1 for every additional 0.10m depth above 1.5 m depth . | 66 | Each | |
| 245 | 3.45 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. | 0.0001 | hect. | |
| 246 | 3.46 | Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. | 40 | Each | |
| 247 | 3.47 | -do- size 600 x 450mm depth upto 0.5 M Cement cover with frame. | 40 | Each | |
| 248 | 3.48 | Construction of Cement Concrete Chamber 125mm dia.\nStainless Steel Sheet Grating | 40 | Each | |
| 249 | 3.49 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: | 0.0001 | hect. | |
| 250 | 3.5 | Size 300 Cm. dia outside & 300 Cm. depth . | 3 | Each | |
| 251 | 3.51 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- | 0.0001 | hect. | |
| 252 | 3.52 | Size 400 x140x150 cm.(for 50 users) | 2 | Each | |
| 253 | 3.53 | Non BSR Item | 0.0001 | hect. | |
| 254 | 3.54 | Providing and fixing battery operated (Sensor) Ist quality WVC flat back large half stall integrated sensor operated urinal of approved make of size 580x380x350 mm with fitting including M.S. bracket, C.P. brass screws, electric wiring, flushing sensor etc. complete including cutting & making good the wall & floor wherever required. | 14 | Each | |
| 255 | 3.55 | Providing and fixing W.C. seat cover with stage tip up facility of Hindware | 18 | Nos. | |
| 256 | 3.56 | Providing and fixing European WC one piece with Cascade (Flushing cistern) as per approved design complete with all adhesive, fastners etc. including all finish as per instruciton of Engineer-in-charge. | 18 | Nos. | |
| 257 | 3.57 | EXTRA ITEMS | 0.0001 | hect. | |
| 258 | 3.58 | Providing and laying in position Ready mix concrete manufactured in fully automatic Batching Plant and transported to site in transit mixer for having continous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C from transit mixer to site of laying, excludind the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerte/retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge. All work works upto floor V floor M20 grade Design mix by using min 400 kh of cement per cum of concrete | 57.13 | cum |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
