| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | item1 | 35 | Cum |
|---|
| 2 | 2 | Providing and laying in position cement concrete of PCC (1:5:10) grade excluding the cost of centering and shuttering in foundation upto plinth stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge in cement mortar | item2 | 10 | Cum |
|---|
| 3 | 3 | 12 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:6 (1 cement : 6 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. | item3 | 140 | Sqm |
|---|
| 4 | 4 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface | item4 | 1625 | Sqm |
|---|
| 5 | 5 | Finishing walls Two or more coats applied @ 3.84 kg/10 sqm) with water proofing cement paint of required shade. | item5 | 1625 | Sqm |
|---|
| 6 | 6 | Painting with synthetic enamel paint of approved brand and quality with two or more coats on new work over an under coat of suitable shade including all complete | item6 | 210 | Sqm |
|---|
| 7 | 7 | Renewing Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm), with putty and nails wherever necessary including racking out the old putty: | item7 | 1.2 | Sqm |
|---|
| 8 | 8 | Providing and fixing ISI marked flush door shutters 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | item8 | 3.6 | Sqm |
|---|
| 9 | 9 | Providing and fixing 30 mm thick shutters wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63mm as per IS :1568, for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineerin-charge: (Note:- Butt hinges and necessary screws shall be paid separately) | item9 | 36 | Sqm |
|---|
| 10 | 10 | Dismantling For thickness of tiles above 25 mm and up to 40 mm tile work in floors laid in cement mortar including stacking material within 50 metres lead. | item10 | 70 | Sqm |
|---|
| 11 | 11 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement without any pigment | item11 | 208 | Sqm |
|---|
| 12 | 12 | Regrading terracing of covered with tiles, in cement mortar by dismantling tiles, relaying tiles, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. | item12 | 335 | Sqm |
|---|
| 13 | 13 | Re-plastering of mud plaster gobri leaping mud mortar 1:3 including disposal of unserviceable material to the dumping ground, all complete as per direction of Engineer-in-Charge. | item13 | 435 | Sqm |
|---|
| 14 | 14 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | item14 | 150 | Sqm |
|---|
| 15 | 15 | Renewing Sal wood battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. | item15 | 2.65 | Cum |
|---|
| 16 | 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). | item16 | 3 | Cum |
|---|
| 17 | 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars | item17 | 150 | Kgs |
|---|
