}

Construction Of Proposed Officers Multi-Storied Buliding Inside Ltps Colony , Maibella, Lakwa Thermal Power Station, Maibella-Assam

Assam Power Generation Corporation Limited-APGCL has published Construction Of Proposed Officers Multi-Storied Buliding Inside Ltps Colony , Maibella. Submission Date for this Tender is 07-07-2020. Building Work Tenders in Lakwa Thermal Power Station, Maibella Assam. Bidders can get complete Tender details and download the document.




Tender Notice

24606920
Corrigendum : Construction Of Proposed Officers Multi-Storied Buliding Inside Ltps Colony , Maibella
Open Tender
Indian
Assam
Lakwa Thermal Power Station, Maibella
07-07-2020

Tender Details

Construction Of Proposed Officers Multi-Storied Buliding Inside Ltps Colony , Maibella

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 26-Jun-2020 Earnest Money Deposit, Performance Guarantee and Retention Money clauses Technical Bid 07-07-2020
2 30-Jun-2020 Corrected units of item of works Financial Bid 07-07-2020

Key Value

Document Fees
INR 4900 /-
EMD
INR 490000.0 /-
Tender Value
INR 2.44 Crore /-

BOQ Items

Name of Work: Civil Works
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earthwork in excavation in ordinary soil for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified including bailing out water where necessary as directed and specified. Upto a depth of 2.00 m below the existing G.L. 810.714 cum
2 2 Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city 308.854 cum
3 3 Earth / sand filling in plinth with predominantly non-plastic silt obtained by truck carriage (including loading and unloading) in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. 288.763 cum
4 4 Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately) in proportion 1 cement: 3 sand: 6 coarse aggregate by volume 22.996 cum
5 5 Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. 64.085 sqm
6 6 50 mm thick plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. 479.4 sqm
7 7 Providing and laying plain/reinforced cement concrete of proportion 1:1.5:3 with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)
8 7.01 In sub-structure upto plinth level 147.72 cum
9 7.02 Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing, from plinth level upto first floor level. 112.08 cum
10 7.03 From First floor level to 2nd floor level 111.6 cum
11 7.04 From second floor level to third floor level 38.58 cum
12 7.05 Third floor level and beyond 40.73 cum
13 8 Providing form work of 25 mm thick ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:
14 8.01 Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. 274.58 sqm
15 8.02 Sides of tie beams, grade beams etc. at or below ground level. 333.28 sqm
16 8.03 Square / rectangular columns, Pillars, Posts etc. Having vertical faces. 700.87 sqm
17 8.04 Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties, depth not existing 1.0 m. 859.402 sqm
18 8.05 Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. 1449.59 cum
19 9 Providing flat brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. 744.28 cum
20 10 Brick work in cement morter of proportion (1:5) with 1st class brick including racking out joints and curing complete as directed
21 10.01 In sub-structure upto plinth level including dewatering if necessary 51.133 cum
22 10.02 In superstructure above plinth level up to 1st floor level 74.089 cum
23 11 Extra over item no. 10 above for brick work in each subsequent floor or part thereof above 1st floor level.
24 11.01 In superstructure above plinth level up to 1st floor level 73.168 cum
25 11.02 In superstructure above second floor to third floor level 73.29 cum
26 11.03 In superstructure above third floor level 19.348 cum
27 12 Providing VITRIFIED floor tiles of approved quality of specified of 600 mm x 600 mm size and above and thickness not less than18 mm on floors, skirtings, risers and treads of steps over 15mm thick base of cement mortar in prop. 1:3 (1cement : 3coarse sand) including cutting where necessary finished with flush pointng with Fix-A-Tile (choksey/Sika/Pedelite/Rouf)/ white cement slurry mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). 1450.88 cum
28 13 Providing Antiskid vitrified Tiles of normal range of Somany or equivalent make of size 300 mm x 300 mm or above and thickness not less than 18 mm on floor over a cement mortar bed of 15mm thick in prop. 1:3 (1cement :3 coarse sand) including cutting where necessary and finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, complete at all level as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) 87.084 cum
29 14 Providing polished vitrified wall tiles of approved quality and 300 mm x 600 mm size and above and thickness not less than 8 mm on dado and skirtings over cement mortar bed 10mm thick in prop. 1:3 (1cement: 3 coarse sand) including cutting where necessary and finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) 582.84 cum
30 15 Kota-stone flooring with 18 mm thick slabs of 550 mm x 550 mm size over 20mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 105.345 cum
31 16 Kota stone slab of 18 mm thick in riser of steps, skirting, dado laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete. 26.598 sqm
32 17 Providing polished granite slab of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). 40.01 sqm
33 18 25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing complete as directed. 9.648 cum
34 19 15 mm thick Cement plaster in proportion (1:5) in single coat on rough / fair side of single or half brick wall or concrete surfaces including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.
35 19.01 Interior wall plastering up to 1st floor level 1189.32 sqm
36 19.02 Exterior wall plastering up to 1st floor level 464.164 sqm
37 19.03 Interior wall plastering from 1st floor to 2nd floor level 1105.53 sqm
38 19.04 Exterior wall plastering from 1st floor to 2nd floor level 376.938 sqm
39 19.05 Interior wall plastering from 2nd to 3rd floor level 1104.81 sqm
40 19.06 Exterior wall plastering from 2nd to 3rd floor level 377.658 sqm
41 19.07 Interior wall plastering for 3rd floor and beyond 56.068 sqm
42 19.08 Exterior wall plastering for 3rd floor and beyond 374.535 sqm
43 19.09 Plastering to slab, soffit of stairs and chujja soffit upto first floor. 524.214 sqm
44 19.1 Plastering to slab, soffit of stairs and chujja soffit from first floor to second floor. 528.032 sqm
45 19.11 Plastering to slab, soffit of stairs and chujja soffit from second floor to third floor. 168.475 sqm
46 20 Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) 6269.74 sqm
47 21 Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar dropping and other foreign matter and including preparing the surface even and sand papered smooth. 6269.74 sqm
48 22 Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. 4533.65 sqm
49 23 Finishing wall with two coats of acrylic emulsion exterior coatings of Asain paint/Berger paint/ICI paint/ J&N paint/Nerolac brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. 1736.1 sqm
50 24 Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter, sand papering and knotting. 576.421 sqm
51 25 Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. 576.421 sqm
52 26 Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. 227.214 sqm
53 27 Painting two coats (excluding priming coat) on new steel and other metal surface with over 100mm in width enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. 227.214 sqm
54 28 Painting two coats (excluding priming coat) on new steel and other metal surface upto 100mm in width enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. 136.806 sqm
55 29 Providing Pre painted Galvanized Iron sheet Roofing (PPGI) 0.5mm thick at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, Purlins etc to be measured and paid separately ) Dyna roof/Wonder Roof/ JSW steel/Spectrum or equivalent as directed by the department. 547.186 sqm
56 30 Providing Pre Painted Galvanized iron sheet (PPGI) accessories (Ridge/Valley/Gutter/Flashing) 0.5mm thick at all levels including fitting and fixing self drilling, self tapping screwss complete. Dyna roof/Wonder Roof/ JSW Steel/ Spectrum or equivalent as directed by the department. 115.374 sqm
57 31 Supplying, fitting and fixing in position false ceiling of 6mm thick Bison panel (cement bonded particle board) with both faces commercial on timber frame of 1st class local wood (Hollock /Bonsum / Sundi etc.) of 50mm x 50mm spaced at not more than 1.20m apart, fixed to the wall at the end with necessary nails, wood screws, hooks, bolts etc including painting (one coat primer and two coats of painting) as necessary complete as directed by the department for all levels. 406.34 sqm
58 32 Providing wood work in frame (chowkaths) of doors with Sal wood wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. 5.832 sqm
59 33 Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws.
60 33.01 30 mm thick for decorative type face panel and block board core 22.729 sqm
61 33.02 30 mm thick for non decorative type and block board core 164.379 sqm
62 34 Providing, fitting and fixing M.S. Plain grill of requiredpattern for windows/ clerestory windows/ opening with M.S. flats and square bars at required spacing in frame all round and fioxed to brickwork / RCC or PCC members. 5680.35 sqm
63 35 Structural steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. In M.S. angles, channels, Tees etc. 6.43 sqm
64 36 Providing and fixing MS tube hand rail of approved size by welding etc to steel ladder railing, balcony railing, staircase railing and similar works, including applying piming coat of approved steel primer complete as specified and directed by department 549.6 kg
65 37 Providing, fitting and fixing anodised aluminium side hung and top hung windows and ventilators of standard sections without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15 mm lugs 100 mm long embedded in CC blocks and glazed with 5 mm clear glass. 65.016 sqm
66 38 Providing, fitting and fixing anodised aluminium sliding windows on two tracks of standard sections having thickness atleast without horizontal glazing bars, joints mitred and welded mm of approved brand (HINDALCO/JINDAL/BHAGWATI SAI(with prrof of purchase of ingot from primary producer)/ Other equilvalent without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels and glazed with 5 mm clear glass. 152.118 sqm
67 39 Providing, fitting and fixing anodised aluminium fixed windows and ventilators of standard sections without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15 mm lugs 100 mm long embedded in CC blocks and glazed with 5 mm clear glass. 20.572 sqm
68 40 Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.(anodised to bright natural matt & satin finished )
69 40.01 250 mm x 16 mm Sliding door bolts 85 each
70 40.02 250 mm x 12 mm Tower bolts 242 each
71 40.03 100 mm Door handles 242 each
72 40.04 Butt hinge 100 mm x 63 mm x 3.2 mm 363 each
73 40.05 Mortice lock vertical type 100mm (Godrej), 6 lever 12 set
74 40.06 Door stopper with rubber stopper 121 each
75 41 Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. (b) Using other ISI marked approved circular hollow section 45.817 Qtl
76 42 Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level).
77 42.01 Other ISI approved TMT reinforcement bar upto first floor 208.529 Qtl
78 42.02 Other ISI approved TMT reinforcement bar above first floor 237.916 Qtl
79 42.03 ISI approved Mild steel reinforcement bar upto first floor 38.09 Qtl
80 42.04 ISI approved Mild steel reinforcement bar above first floor 31.954 Qtl
81 43 Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. 2.415 sqm
82 44 Providing ,fitting and fixing (600x600) mm 90mm thick C.I. man hole cover and frame 25kg. Weight complete as directed and specified. 6 each
83 45 Construction of filter bed in soak pit including earthwork in excavation of soil, and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C plain sheet above brick bat filling completed as directed (sizes of soak pit may vary depending on the sizes and capacities of septic tank as well as the number of users mentioned in the table. 13.122 cum
84 46 Providing plinth protection 50mm thick to cement concrete 1 : 3 : 6 with coarse agg.of 20mm nominal size including finishing the surface with 10mm thick cement plaster in proportion 1:3 with a floating coat of neat cement finished. 53.16 sqm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail