Military Engineer Services-MES has published Repairs To Floor , Wall Joineries , Roof Sheets , Ceiling , Plumbing , Rolling Shutters , Steel Gates And Misc B/R Works At Sect C And In Otm Accn Of Zone-Iii And Iv Area Under Age B/R-Ii Under Ge Dinjan Repairs To Floor , Wall Joineries , Roof Sh. Submission Date for this Tender is 11-07-2020. Shed Construction Tenders in DINJAN MIL STN Assam. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 22-Jun-2020 | REVISED BOQ | BOQ | 04-07-2020 |
2 | 06-Jul-2020 | DATE POSTPONED | Date | 11-07-2020 |
Name of Work: REPAIRS TO FLOOR, WALL JOINERIES, ROOF SHEETS, CEILING, PLUMBING, ROLLING SHUTTERS, STEEL GATES AND MISC B/R WORKS AT SECT ‘C’ AND IN OTM ACCN OF ZONE-III AND IV AREA UNDER AGE B/R-II UNDER GE DINJAN | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking down steel window/ventilator frames with shutters (without taking off shutter from frame) of any size complete all as specified and as directed. | 40 | Each | |
2 | 2 | Taking down chowkats or frames not exceeding 1.5Sqm each with shutter (with out taking off shutters from the frame) complete all as specified and as directed. | 35 | Each | |
3 | 3 | Taking down chowkats or frames exceeding 1.5 Sqm and not exceeding 4.0Sqm each with shutter (without taking off shutters from the frame) complete all as specified and as directed. | 60 | Each | |
4 | 4 | Taking down shutters of any description exceeding 1.0Sqm and not exceeding 2.0Sqm and removing from site complete all as specified and as directed. | 35 | Each | |
5 | 5 | Taking down shutters of any description not exceeding 1.0Sqm each complete all as specified and as directed. | 25 | Per Leaf | |
6 | 6 | Refixing of shutters of any description not exceeding 1.0Sqm each complete all as specified and as directed. | 10 | Per Leaf | |
7 | 7 | Refixing of shutters of any description exceeding 1.0Sqm but not exceeding 2.0Sqm each complete all as specified and as directed. | 15 | Per Leaf | |
8 | 8 | Taking down cement or lime plaster on brick or stone masonary surfaces of walls etc including racking out joint hacking for keys scrubbing down with water etc complete all as specified and as directed. | 250 | Sqm | |
9 | 9 | M&L for 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces complete all as specified and as directed. | 275 | Sqm | |
10 | 10 | M&L for 10mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces complete all as specified and as directed. | 50 | Sqm | |
11 | 11 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. | 325 | Sqm | |
12 | 12 | M&L for applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome on steel surfaces including preparation of previously untreated surfaces of any description, over 10cm width or grith complete all as specified and as directed. | 310 | Sqm | |
13 | 13 | M&L for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer of any description, not otherwise described, over 10cm width or grith including preparation of surface complete all as specified and as directed. | 275 | Sqm | |
14 | 14 | S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay with glazing bars, devotailed or welded complete all as specified and as directed. | 40 | Sqm | |
15 | 15 | S&F for steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed. | 40 | Sqm | |
16 | 16 | S&F for aluminum anodized glazed ventilators with frame of standard section and grill including provision of glazing with 3mm thick glass fixed to frame, rubber beading, handles and tower bolts etc. as in repairs including removing of old windows complete all as specified and as directed. | 7 | Sqm | |
17 | 17 | S&F for aluminium anodised frame for doors, windows etc with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. | 75 | KG | |
18 | 18 | S&F for powder coated aluminium anodised frame for doors, windows etc with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. | 70 | KG | |
19 | 19 | S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. | 25 | Sqm | |
20 | 20 | S&F for aluminium anodised powder coated (minm thickness of powder coating 50 micron) door shutters , aluninium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neopriene paccking, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed. | 6 | Sqm | |
21 | 21 | Supply only 5.5mm thick sheet glass, selected quality in squares not exceeding 0.5Sqm each pane complete all as specified and as directed. | 27 | Sqm | |
22 | 22 | S&F for mild steel window guard bars, plain, let in and fixed independently in wooden frames, L or T section, supports for shelves etc., and similar articles confirming to Fe 290 (Gde E-165) including drilling holes complete all as specified and as directed. | 450 | KG | |
23 | 23 | S&F for aluminium anodised (Deco) pattern grill 75x75mm size design No. 102, 7.30mm thick including suitable F/H section frame fixed with aluminium plate screw to window complete all as specified and as direcetd. | 5 | KG | |
24 | 24 | M&L for 12mm thick prelaminated particle board, interior grade both sides with decorative choice laminations, fixed in to the wall with aluminium clip and bolt, complete all as specified and as directed. | 5 | Sqm | |
25 | 25 | S&F in repairs for stainless steel wire cloth 0.36mm, nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stamples complete all as specified and as directed. | 90 | Sqm | |
26 | 26 | S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed. | 25 | Each | |
27 | 27 | S&F in repair galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of operturel 1.18 mm complete fixed stables complete all as specifed and as directed. | 25 | Sqm | |
28 | 28 | S&F for galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed. | 75 | Sqm | |
29 | 29 | S&F for mild steel framed work as in doors/gates of angle or other section with gusset plates, rails, braces, etc. drilled for fixing of steel sheeting or other covering, using steel door etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing Fe-290 (Gde E-165) complete all as specified and as directed. | 850 | KG | |
30 | 30 | S&F for 1.0mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks, water troughs, ducts, urinal trough and funnels etc, cut to size, edge beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets etc as required complete all as specified and as directed. | 20 | Sqm | |
31 | 31 | S&F for 35mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and if one face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed. | 15 | Sqm | |
32 | 32 | M&L for 35mm thick 2nd class hard wood made at site plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and as directed. | 65 | Sqm | |
33 | 33 | M&L for 35mm thick 2nd class hard wood made at site glazed and skeleton shutters, open rebated and prepared to receive glass, guaze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a); supplied and fitted to chowkhats complete all as specified and as directed. | 50 | Sqm | |
34 | 34 | S&F for pressed steell door frame 125x60mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates complete as specified and as directed \nNote : PCC filling of holloow section measured and paid seprately. | 150 | RM | |
35 | 35 | M&L for PCC type C-1, 1:3:6 (20mm graded stone aggt) for cills,hold fast filling of hollow of pressed steel door frame etc complete all as specified and as directed. | 0.9 | Cum | |
36 | 36 | Dismantling framed timber work in fillets, rails, posts, rafters, purlins etc under 40 Sq.cm in section complete all as specified and as directed. | 50 | RM | |
37 | 37 | Dismantling timber scantling 40 sqcm and over in section in any position of framed work complete all as specified and as directed. | 0.5 | Cum | |
38 | 38 | Dismantling boarding, any description, fixed in any position with nails (for cupboard shelve) complete all as specified and as directed. | 45 | Sqm | |
39 | 39 | M&L for 18/19 mm thick pre laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed. | 45 | Sqm | |
40 | 40 | M&L for 2nd class hard wood, plain fillets, Square, rectangular or triangular in section, chamfered, rounded, secured with nails or brads exceeding 3.0Sqcm and not exceeding 6.0Sqcm complete all as specified and as directed. | 50 | RM | |
41 | 41 | S&F in repairs hasp staple 100mm long safety with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. | 30 | Each | |
42 | 42 | S&F for 100mm long aluminium anodised, barrel tower bolts of extruded section fixed with screws complete all as specified and as directed. | 10 | Each | |
43 | 43 | M&L for 150mm long aluminium barrel tower bolts, of extruded section and fixed complete all as specified and as directed. | 100 | Each | |
44 | 44 | M&L for 200mm long aluminium barrel tower bolts, of extruded section and fixed complete all as specified and as directed. | 130 | Each | |
45 | 45 | S&F for 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. | 310 | Each | |
46 | 46 | S&F for 75mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. | 60 | Each | |
47 | 47 | S&F for extruded aluminium alloy handle fabricated type, anodised, of size 100mm complete all as specified and as directed. | 30 | Each | |
48 | 48 | S&F for extruded aluminium alloy handle fabricated type, anodised, of size 125mm complete all as specified and as directed. | 30 | Each | |
49 | 49 | M&L for 150mm long aluminium pressed handles, cast type anodised complete all as specified and as directed. | 150 | Each | |
50 | 50 | S&F for aluminium anodised sliding door bolts of size 300mm long, with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy complete all as specified and as directed. | 80 | Each | |
51 | 51 | S&F for mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. | 15 | Each | |
52 | 52 | S&F in repairs mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. | 20 | Each | |
53 | 53 | S&F in repairs 20mm dia curtain rod CP with fixing brackets, stops rollers etc complete all as specified and as directed. | 25 | RM | |
54 | 54 | S&F in repairs 20mm dia curtain rod aluminium alloy with fixing brackets, stops rollers etc complete all as specified and as directed. | 75 | RM | |
55 | 55 | Cutting down plants/shrubs of girth n,exc 15cm from roof tops/sides of external walls of bldg, chajjas, wall junction etc incl taking out penetrated roots in to the wall, slab surfaces and applying "CHEMICAL" solution (herbal medicine) as per manufacturer's instructions in and around the surfaces and making good the location with PC 1:2:4 and cement mortar (1:2) including necessary scaffolding 3.5m to 10m height from ground level all as directed at site complete all as specified and as directed. | 30 | Nos | |
56 | 56 | Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. | 119 | Sqm | |
57 | 57 | M&L for non skid tiles 7 to 8mm thick area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm 7mm thick coloured tiles in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over screed bed or bedding 15mm thick in cement mortar (1:6) complete all as specified and as directed. | 22 | Sqm | |
58 | 58 | M&L for non skid coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm (400x400x7mm)in floor ,over 20mm thick screed bed or bedding in cement mortar (1:6) on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed. | 40 | Sqm | |
59 | 59 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm (400x400x7mm) as in skirting, over 10mm thick rendering in CM 1:4 on wall set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed. | 12 | Sqm | |
60 | 60 | S&F for glazed ceramic coloured tiles of 300x200x7mm thick tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, over backing coat of in cement mortar (1:4) 10mm thick complete all as specified and as directed. | 45 | Sqm | |
61 | 61 | M&L for chequered cement concrete tiles 25cmx25cmx20mm thick set and jointed and pointed with grey cement and pigments in neat cement slurry in floors including 15mm thick screed bed in cement mortar (1:4) set and jointed and pointed in neat cement slurry complete all as specified and as directed. | 25 | Sqm | |
62 | 62 | M&L for machine pressed precast conctete interlocking paver block any shape and any size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment with 75mm thick sand cusion layer complete all as specified and as directed | 50 | Sqm | |
63 | 63 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. | 5 | Cum | |
64 | 64 | S&F for 3mm thick sheet glass, ordinary quality and glazing with wooden beads/oil putty in square not exceeding 0.5Sqm in each pane complete all as specified and as directed. | 70 | Sqm | |
65 | 65 | Hacking and old broken glass (any thickness, Size quality or description) from wooden frames or stone or concrete or brick work surrounds complete all as specified and as directed. | 25 | Sqm | |
66 | 66 | M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) for fixing of hold fast including necessary form work complete all as specified and as directed. | 1.5 | Cum | |
67 | 67 | M&L for mild steel flat iron holdfast fixed to door chowkat complete all as specifed and as directed. | 50 | KG | |
68 | 68 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc complete all as specified and as directed. | 7 | Cum | |
69 | 69 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in built in cement mortar (1:6) complete all as specified and as directed. | 7 | Cum | |
70 | 70 | S&F for solid PVC door frame of size 50 x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening complete all as specified and as directed. | 173 | RM | |
71 | 71 | S&F for factory made EPS core solid PVC door shutter with wood free EPS board 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face. The door on all the edges to be sealed with lipping of 10mm (5mm x 2) thick X25mm wide PVC sheet for 3 sides and 60mm wide PVC sheet for lock side. The lipping shall be bonded to the 2mm moulded / plain PVC sheet with solvent cement complete all as specified and as directed. | 42 | Sqm | |
72 | 72 | S&F in repairs, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic bal screwed for iron pipe and fixed (minimum weight 15mm-142gms/20mm-210 gms/25mm-455gms/40mm-690 gms) complete all as specified and as directed. | 50 | Each | |
73 | 73 | S&F for stainless steel kitchen plate rack 1mm thick of size 31"x30"x10" complete all as specified and as directed.\nMake : Prayag/Shakti. | 10 | Each | |
74 | 74 | S&F in repairs 15mm bore bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. | 10 | Each | |
75 | 75 | S&F for 75mm dia PVC (SWR) floor trap plain with greting including jointing with solvent cement and including fixing of PCC, 1:2:4 complete all as specified and as directed. | 26 | Each | |
76 | 76 | S&F in repairs, stop valves, 15mm bore cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. | 15 | Each | |
77 | 77 | S&F in repairs, 15mm bore, PVC connection PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and as directed. | 25 | Each | |
78 | 78 | S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket and flush pipe complete all as specified and as directed. | 10 | Each | |
79 | 79 | S&F in repairs, 15mm bore pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. | 15 | Each | |
80 | 80 | S&F in repairs, swivel shower rose of PTMT, 15mm bore (minimum wieght 40gms) including shower arm 1.5mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum wt 40 gms) complete all as specified and as directed. | 5 | Each | |
81 | 81 | S&F in repairs, 15 mm bore, bib tap, PTMT (PVC) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. | 150 | Each | |
82 | 82 | M&L for 75mm thick PCC type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. | 25 | Sqm | |
83 | 83 | M&L for 40mm thick, PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in floors and finishing the surface even and smooth without using extra cement complete all as specified and as directed. | 25 | Sqm | |
84 | 84 | S&F for glass dividing 3mm thick 38mm wide and inserted in position to conforming to design complete all as specified and as directed. | 50 | RM | |
85 | 85 | M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with mastic filling in proportin of bitumen and sand (1:2) complete all as specified and as directed. | 15 | Sqm | |
86 | 86 | Dismantling asbestos cement (corrugatd, semi corrugated etc) sheets in roof coverings including ridge complete all as specified and as directed. | 55 | Sqm | |
87 | 87 | M&L for 6mm thick asbestos cement sheet, corrugated, or semi corrugated sheets in roofs, walls, etc and fixed with L type or J type or cranked hook bolts complete all as specified and as directed. | 20 | Sqm | |
88 | 88 | M&L for asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheet, fixed with L type or J type hook or cranked hook bolt with washer complete all as specified and as directed. | 5 | RM | |
89 | 89 | Dismantling plain/corrugated sheet any gauge in roof covering, valley gutters or wall cladding etc complete all as specified and as directed. | 170 | Sqm | |
90 | 90 | S&F for 0.80 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and as directed. | 35 | Sqm | |
91 | 91 | Fixing only for 0.80 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and as directed. | 15 | Sqm | |
92 | 92 | S&F for 0.80 mm thick plain galvanised iron sheeting in roof ridges, valley gutters complete all as specified and as directed. | 15 | Sqm | |
93 | 93 | S&F for prepainted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. | 115 | Sqm | |
94 | 94 | S&F for prepainted galvalume aluminium zinc coating galvanised iron based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. | 20 | Sqm | |
95 | 95 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed. | 60 | Sqm | |
96 | 96 | S&F for aluminium Anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestor E-board, HSPC fixed to frame including two coats of white wash complete all as specified and as directed. | 60 | Sqm | |
97 | 97 | S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed. | 15 | Each | |
98 | 98 | Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and as directed. | 105 | RM | |
99 | 99 | S&F steel tubing 15mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and as directed. | 85 | RM | |
100 | 100 | Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed. | 20 | RM | |
101 | 101 | Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and as directed. | 80 | RM | |
102 | 102 | S&F steel tubing 20 mm bore medium grade galvanised with all fittings and fixed complete to wall, ceilings or laid in floors complete all as specified and as directed. | 70 | RM | |
103 | 103 | Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed. | 10 | RM | |
104 | 104 | Dismantling water tanks and removing to store capacity exceeding 250 but not exceeding 500 litre complete all as specified and as directed. | 13 | Each | |
105 | 105 | S&F for rotational moulded polyethylene water storage tank capacity 500 litres consisting of three layer cylindrical vertical with top closed hoisted and fixed in position complete all as specified and as directed. | 13 | Each | |
106 | 106 | Dismantling water tanks capacity exc 500 litres and not exceeding 1000 litres and removing to store complete all as specified and as directed. | 3 | Each | |
107 | 107 | S&F Rotational moulded poly ethylene water storage tanks 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. | 3 | Each | |
108 | 108 | S&F in repairs 600x450mm beveled edged mirror or selected qualtity glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers complete all as specified and as directed. | 15 | Each | |
109 | 109 | Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed. | 12 | Cum | |
110 | 110 | M&L for water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below :- \n(a) Taking down/scrapping out existing old tarfelt bituminous compound including, sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n.exc. 250m. (b) 15mm thick plastering in cement mortar (1:4) finished even and smooth. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 ltrs per sqm confirming to IS-3384. (e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm ) shall be applied over bituminous primer as specified above. Application of polymeric membrance shall be torch application. The over lap shall be minimum 100mm on transverse direction and 75mm longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm. | 480 | Sqm | |
111 | 111 | M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand (1:1) (by weight) complete all as specified and as directed. | 100 | RM | |
112 | 112 | M&L for roof truses (framed), trussed, purlins, crane gantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat section) including distance pices, cleats etc.Fe-290 (Gde E-165) complete all as specified and as directed. | 500 | KG | |
113 | 113 | Dismantling 100mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed. | 60 | RM | |
114 | 114 | S&F for 110mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. | 45 | RM | |
115 | 115 | S&F for 75mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. | 35 | RM | |
116 | 116 | S&F for PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 75mm dia complete all as specified and as directed. | 5 | RM | |
117 | 117 | S&F for 110 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed. | 11 | Each | |
118 | 118 | S&F for 75 mm bore, PVC (SWR) bends complete all as specified and as directed. | 10 | Each | |
119 | 119 | S&F for PVC (SWR) junction, single, (single T) equal or unequal 110mm bore complete all as specified and as directed. | 10 | Each | |
120 | 120 | Servicing of steel rolling shutters of area upto 21 sqm (single opening) of lever operated with rectification of minor defects, overhauling, greasing, lubricanting of guide rails and refixing clamps, rivetting including necessary repairs to the locking arrangements and replacement of wornout spare parts such as gear/worm/interlocking laths/ball bearing in order to bring the rolling shutters to easy operation and smooth funtioning all as directed by the Engr-in-Charge.\nNote : The Spare parts will be measured and paid for separately and rate quoted is deemed to include for fixing of spare parts | 30 | Each | |
121 | 121 | M&L for preparation of old steel and iron surfaces of any description over 10cm width or girth and painting with one coat of synthetic enamel paint complete all as specified and as directed. | 400 | Sqm | |
122 | 122 | M&L for greasing only of rolling shutters including guide channels of area up to 21Sqm of area complete all as specified and as directed. | 45 | Each | |
123 | 123 | S&F in repairs 1mm thick hood cover of hexogonal, square or circular contour depending on the contour of bracket plates properly stiffened with angle / flat stiffener at top and bottom edges complete all as specified and as directed. | 40 | Sqm | |
124 | 124 | S&F in repairs 50mm bore mild steel pipe for suspension shafts for rolling shutter complete all as specified and as directed. | 15 | RM | |
125 | 125 | S&F in repairs bevel gear box for rolling shutters complete all as specified and as directed. | 5 | Each | |
126 | 126 | S&F in repairs crank handle for operating gear operated rolling shutters complete all as specified and as directed. | 5 | Each | |
127 | 127 | M&L for welding in repairs exc 2.5cm but n. exc 5cm in length to the thickness of metal n. exc 6mm thick to be welded complete all as specified and as directed.\n(Note : If small minor repairs, without removing the shutter welding to be carriedout at spot carefully) | 250 | Each | |
128 | 128 | Supply only gear/worm (machine cut) including connection mechanical device and testing complete all as specified in SSR and of approved make. | 18 | Each | |
129 | 129 | Supply only interlocking lath sections made out of cold rolled steel strips of 1.2mm thick and 75mm width complete all as specified in SSR and as directed. | 175 | RM | |
130 | 130 | Supply only rolling ball bearing for rolling shutters of approved make complete all as specified and as directed. | 10 | Each | |
131 | 131 | S&F for main spring 'O' gauge 450mm long of approved make complete all as specified and as directed. | 10 | Each | |
132 | 132 | S&F for safety lever locks mild steel 4 levers for rolling shutters complete all as specified and as directed. | 15 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail