Sales : +91-777 804 8217
| Name of work :- Construction of Cultural Auditorium at Matmara, Dhakuakhana. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL WORKS:-\nEarthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.\n(A) Up to a depth of 2.00m below the existing ground level.\n(a) In ordinary soil | item1 | 1255 | Cum |
| 2 | 2 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.\n(a) With earth or silt or sand obtained by head load with lead upto 90m and lift upto 2m\n | item2 | 276 | Cum |
| 3 | 2.1 | (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | item3 | 373 | Cum |
| 4 | 3 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.\n(b) Other than Guwahati city | item4 | 4215 | Cum |
| 5 | 4 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).\n(a) In prop 1cement: 3 sand :6 coarse aggregate by volume\n | item5 | 56 | Cum |
| 6 | 5 | Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete.\nc) 100mm thick | item6 | 236 | Sqm |
| 7 | 6 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | item7 | 6 | Sqm |
| 8 | 7 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)\n(I) Using Mixer Machine\n(A) In substructure up to plinth level\nFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.\n(N) Without using admixture, plasticiser\n(b) M20 grade concrete or Prop. 1:1.5:3\n | item8 | 221 | Cum |
| 9 | 7.1 | (B) In super structure from plinth level up to 1st floor level. \n(ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\n(N) Without using admixture, plasticiser\n(b) M20 grade concrete or Prop. 1:1.5:3 | item9 | 156.9 | Cum |
| 10 | 7.2 | Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level. | item10 | 40 | Cum |
| 11 | 8 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:\nFoundation, footings, bases of columns, pile cap, raft and mass concrete works etc.\n(a) Using 38mm thick plank | item10 | 107 | Sqm |
| 12 | 8.1 | (b) Using 25mm thick plank | item11 | 65 | Sqm |
| 13 | 8.2 | Sides of tie beams, grade beams etc. at or below ground level.\n(b) Using 25mm thick plank\n | item12 | 553 | Sqm |
| 14 | 8.3 | Columns, Pillars, Posts & Strut\n(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face\n(i) Using 38mm thick plank | item13 | 180 | Sqm |
| 15 | 8.4 | (ii) Using 25mm thick plank | item14 | 75 | Sqm |
| 16 | 8.5 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.\n(a) For depth not exceeding 1.0M.\n(ii) Using 25mm thick plank\n | item15 | 119 | Sqm |
| 17 | 8.6 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.\n(a) Floors etc. upto 200mm in thickness.\n(ii) Using 25mm thick plank\n | item16 | 135 | Sqm |
| 18 | 8.7 | Sloping or Battering sufaces such as sloped slabs etc. including folded plates.\n(a) Where inclination to horizontal plane does not exceed 30o requiring shuttering only on the underside.\n(ii) Using 25mm thick plank | item17 | 12 | Sqm |
| 19 | 8.8 | Vertical ties, fins, sun breaker, louvers, bands, dropwalls etc.\n(ii) Using 25mm thick plank | item18 | 225 | Sqm |
| 20 | 8.9 | Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank) | item19 | 33 | Sqm |
| 21 | 9 | Providing formwork using 2mm pressed bend shuttering plate of mild sheet and tubular telescopic steel props including centering, shuttering, strutting and propping etc. complete and removal of the same for in situ reinforced concrete and plain concrete work in:\nColumns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | item20 | 367 | Sqm |
| 22 | 10 | Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.\n(a) Brick on flat soling\n | item21 | 817 | Sqm |
| 23 | 11 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.\n(I) In Sub-structure upto plinth level including dewatering if necessary\n(b) In proportion 1:4.\n | item22 | 80 | Cum |
| 24 | 12 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall\n(a) In cement mortar in proportion 1:4 (1 cement:4 sand)\n | item23 | 973 | Sqm |
| 25 | 13 | Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department).\n(a) Normal range \n(Somany/ Orient/Nitco /Asian Make)\n(i) Of size 300mmx300mm and above | item24 | 16 | Sqm |
| 26 | 14 | Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).\na) Normal range \n Somany/ Orient/Nitco/Asian Make\n(ii) Of size 200mmx300mm and above | item25 | 64 | Sqm |
| 27 | 15 | Providing SUN ROCK HIGH CTS/ DEVI paver block/ tiles of concrete grade M30 or above of approved quality, size, shape of specified thickness over a leveling bedding layer of 30mm compacted sand over a base course of WBM or PCC (Base course to be paid separately) including cutting where necessary finished with spreading, sweeping joining sand and compacting the pavers using vibrating compactor as specified and directed.\nSUN ROCK HIGH CTS/ Devi Tiles (Pavers)\n(b) 60 mm thick | item26 | 667 | Sqm |
| 28 | 16 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.\nb) In cement mortar 1:4 | item27 | 2481 | Sqm |
| 29 | 17 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.\nA) On rough side\n(b) In cement mortar 1:4\n | item28 | 1248 | Sqm |
| 30 | 18 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nDyna roof / Durakolor/ Wonder Roof/ JSW Steel/ Spectrum or equivalent as directed by the Departement.\n(iii) 0.50 mm thick | item29 | 1520 | Sqm |
| 31 | 19 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete.\nDyna roof / Durakolor /Wonder Roof/ JSW Steel/ Spectrum or equivalent as directed by the Departement\n(iii) 0.50 mm thick | item30 | 25 | Rm |
| 32 | 20 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. \n(a) With sal wood | item31 | 0.55 | Cum |
| 33 | 21 | Providing and fixing 1st class timber moulded architrave of size 50x20mm to door and window frames with countersunk wood screw,wooden plugs and applying a coat of wood preservative on unexposed surface etc. \n(b)With Bonsum/ Sundi wood. | item32 | 120 | Rm |
| 34 | 22 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. \na) Decorative type face panel and block board core.\n(ii) 35 mm thick . | item33 | 29 | Sqm |
| 35 | 23 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.\nII Ornamental grill\n(c) Fixed to Brickwork/P.C.C/R.C.C. | item34 | 1261 | Kg |
| 36 | 24 | Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections having thickness atleast 1.9mm of approved brand (HINDALCO/ JINDAL/ BHAGWATI SAI (with proof of purchase of ingot from primary producer)/ Other equivalent) without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately).\n(a)Side hung and Top hung windows and ventilators\niv) 5 mm clear glass | item35 | 49 | Sqm |
| 37 | 25 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections having thickness atleast 1.9mm of approved brand (HINDALCO/ JINDAL/ BHAGWATI SAI (with proof of purchase of ingot from primary producer)/ Other equivalent) without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.\n(b)3 Track sliding window\n (iv) 5 mm clear glass\n | item36 | 49 | Sqm |
| 38 | 26 | Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levels. | item37 | 35 | Rm |
| 39 | 27 | Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately)\n(b) 29mm thick | item38 | 12 | Sqm |
| 40 | 28 | Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item39 | 1060 | Sqm |
| 41 | 29 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)\n(i) Thickness = 1.5 mm thick | item40 | 1810 | Sqm |
| 42 | 30 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.\n(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item41 | 1210 | Sqm |
| 43 | 31 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.\n(i) Surfaces over 100mm in width or girth.\n(b) High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) | item42 | 45 | Sqm |
| 44 | 32 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.\n(a) With ready mixed \"red-lead/ red oxide\" primer. | item43 | 48.33 | Sqm |
| 45 | 33 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.\n(i) Surfaces over 100mm in width or girth.\n(b) High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item44 | 72.33 | Sqm |
| 46 | 34 | Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | item45 | 567 | Sqm |
| 47 | 35 | Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | item46 | 1864 | Sqm |
| 48 | 36 | Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ).\na) Sliding door bolts\ni) 300mm x 16mm | item47 | 1 | Each |
| 49 | 36.1 | b) Tower bolts\nii) 250mm x 12mm | item48 | 6 | Each |
| 50 | 36.2 | c) Door handles\niii) 150mm | item49 | 10 | Each |
| 51 | 36.3 | v) Door stopper with rubber stopper | item50 | 10 | Each |
| 52 | 37 | Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 40mm x 40mm x 6mm M.S. angle and with M.S. flat of 40mm x 6mm size as per approved design.Necessary locking arrangement for temporary closing the gate and 2nos.( minimum) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embedded in C.C brick pillers as necessary including a red oxide painting to all iron works as directed and specified.(Separate payment will be made for posts). | item51 | 25 | Qtl |
| 53 | 38 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level)\na) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL\n(ii) Super Ductile (SD) TMT reinforcement bars | item52 | 480.5 | Qtl |
| 54 | 39 | Extra over item 38 for each subsequent floor or part thereof above first floor level. | item53 | 105 | Qtl |
| 55 | 40 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed.\n(a) TATA make Circular Hollow section- CHS of Grade YST-310 conforming to I.S. Specification : 1161-1998 | item54 | 259.5 | Qtl |
| 56 | 41 | Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint. | item55 | 5.5 | Sqm |
| 57 | 42 | Supplying and dibbling of selected lawn grass [ Doob grass (Cynodon dactylon), cushion grass (Axonopus affinis)] after preparing the land by ploughing / working to a depth of 40 -45 cm, removing of all unwanted debris ( rubbles, pebbles, plant roots etc.), mixing of organic manure(10kg - 15kg/sq.m), levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc.( as specified) for a period of six months from the date of dibbling including the application of recommended dose of fertilizers(N:P:K) mixture as specified and directed by the department.\n(b) By Carpet grass (Axonopus affinis) | item56 | 265 | Sqm |
| 58 | 43 | Supplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(A) With Fancy leaf caladium/Coleus\n(iii) Using concrete pot of 60 cm dia. | item57 | 20 | Each |
| 59 | 43.1 | (D) With Peacock/spider/Umbrella\n(iii) Using concrete pot of 60 cm dia. | item58 | 30 | Each |
| 60 | 43.2 | (F) With Marry Christmas begonia / Polypodium / Aluminium plant\n (III) Using concrete pot of 60 cm dia. | item59 | 30 | Each |
| 61 | 44 | Supplying and planting of palms with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n(A) With Bottle palm\n (III) Using concrete pot of 60 cm dia. | item60 | 30 | Each |
| 62 | 45 | Supplying and planting of seasonal flower in required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)\n (II) Using earthen pot of 60 cm dia. | item61 | 30 | Each |
| 63 | 45.1 | (III) Using concrete pot of 60 cm dia. | item62 | 25 | Each |
| 64 | 46 | Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . \n(A) ADOPTING SINGLE ROW PLANTING METHOD\n (i) With Duranta | item63 | 40 | Metre |
| 65 | 46.1 | (iii) With Chinese Bamboo | item64 | 30 | Metre |
| 66 | 47 | Supplying and planting of ornamental trees (1'-0\" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . \nSHADE TREE\n(A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar | item65 | 20 | Each |
| 67 | 47.1 | (D) Bottle Brush / Nil Gulmohar / Debadaru / Weeping Willow | item66 | 20 | Each |
| 68 | 48 | Supplying and planting of ornamental shrub ( below 1'-0\" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .\n(A) Radhachura / Krishnachura / Rat ki rani / Ixora / Jetuka | item67 | 30 | Each |
| 69 | 48.1 | (B) Allmanda / Khorika zai / May flower / Kamini / Kathanda / Tecoma / Acalypha / Bougainvillea / Dracaena / Togor / Nilakantha / Mussaenda | item68 | 25 | Each |
| 70 | 48.2 | (D) Thuja | item69 | 20 | Each |
| 71 | 48.3 | (E) Poinsettia / Forget me not | item70 | 20 | Each |
| 72 | 49 | Preparation of a carpet bedding by raising the backside of the bed to a height of 45 cm (average) after mixing organic manure, fertilizer including supplying and planting of grass and specimen plants (Brindavan) to engrave the desired letters, necessary maintenance for a period of 6 months from the date of planting complete as directed and specified by the department. | item71 | 185 | Sqm |
| 73 | 50 | Edging with bricks laid dry lengthwise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth within a lead of 50 m. | item72 | 438 | Each |
| 74 | 51 | Felling and removing\n(c) Cutting trees including uprooting and removing where necessary.\n(i).500 mm to 1000mm girth. | item73 | 10 | Each |
| 75 | 51.1 | (ii).1000 mm to 1500mm girth. | item74 | 15 | Each |
| 76 | 51.2 | (iii).1500 mm to 1800mm girth. | item75 | 25 | Each |
| 77 | 52 | Surface dressing of ground including removing vegitation and/ or undulation of ground not exceeding 150mm deep and disposal of rubbish outside the periphery and lift up to 1800mm in all kinds of soil. | item76 | 4755 | Sqm |
| 78 | 53 | SANITARY FITTINGS AND WATER SUPPLY WORKS :-\nProviding fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)\nIndian type W.C Orissa pattern of size 580 x 440 mm\n(a) White\n(iii) Jaquar make | item77 | 2 | Each |
| 79 | 54 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)\n(C) Jaquar make\n(a) White\n(ii) Size 550 x 350 x 360 (Cat No.CNS-WHT-WS02) (inclusive of seat cover) | item78 | 1 | Each |
| 80 | 55 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin of with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.\n(B) Hindware Make\na) White\n(ii)URINAL ALEXA E-Sense (Cat. No.96005) | item79 | 2 | Each |
| 81 | 56 | Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.\n(A) Parryware Make \n(i) White (Cat. No. C0503) | item80 | 1 | Each |
| 82 | 57 | Supplying, fiting and fixing automatic flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\n(ii) Hindware make\n(a) White\nAuto Cister 10 litre (Cat. No.C61002) | item81 | 4 | Each |
| 83 | 58 | Supplying fiting and fixing vitreous china division plate including fitting and fixing compete as directed and specified. \n(ii) Hindware Make\n(a) White\n(i) Division Plate 680 x 300 (Cat. No.61001) | item82 | 1 | Each |
| 84 | 59 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)\nBasin (without pedestal)\n(B) Hindware Make\n(a) White\n(ii) Standard 630 x 450 (Cat. No.10001) | item83 | 5 | Each |
| 85 | 60 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately\n(A) Parryware Make\n(i) Single Bowl with Veg Bowl & Drain Board (400 x 200) Flat Edge- Glossy (Cat.No.C8545) | item84 | 1 | Each |
| 86 | 61 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | item85 | 5 | Each |
| 87 | 62 | Providing fitting and fixing Glass Shelf complete as directed and specified.\nGlass shelf with C.P. guard rail \n(ii) Sona make (Cat. No.TR-0701)\n(b) 525mm | item86 | 1 | Each |
| 88 | 63 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified.\n(a) Parryware Make\n(ii) Wall Soap tray (Cat. No.C9951) | item87 | 1 | Each |
| 89 | 64 | Providing, fitting and fixing CP towel rail complete as directed and specified.\n(a) Jaquar mak\n(ii) Continental 600mm (Cat.No. ACN-1111N) | item88 | 1 | Each |
| 90 | 65 | Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified.\n(a) Jaquar Make\n(i) 32mm (HT/FT) (Cat.No.ALD-705 / 709) | item89 | 5 | Each |
| 91 | 66 | Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified.\n(a) Jaquar make \n(i) Bottle trap (with internal partition) 32mm size with 250mm long wall connection pipe (Cat.No. ALD-769)\n | item90 | 5 | Each |
| 92 | 67 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified.\n(a) In exposed surfaces or in trenches.\n(ii) 110mm dia. | item91 | 38 | Rm |
| 93 | 67.1 | (iv) 75mm dia. | item92 | 5 | Rm |
| 94 | 67.2 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\n(ii) 110mm dia. | item93 | 8 | Rm |
| 95 | 67.3 | (iv) 75mm dia. | item94 | 2 | Rm |
| 96 | 68 | Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.\n(b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\n(ii) 110mm dia. | item95 | 1 | Each |
| 97 | 68.1 | (iv) 75 mm dia. | item96 | 1 | Each |
| 98 | 69 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\na) In exposed surfaces or in trenches. \n(ii) 110mm dia. | item97 | 1 | Each |
| 99 | 69.1 | (iv) 75 mm dia. | item98 | 1 | Each |
| 100 | 69.2 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\n(ii) 110mm dia. | item99 | 1 | Each |
| 101 | 69.3 | (iv) 75 mm dia. | item100 | 1 | Each |
| 102 | 70 | Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\na) In exposed surfaces or in trenches. \n(ii) 110mm dia.\n | item101 | 1 | Each |
| 103 | 70.1 | (iv) 75 mm dia. | item102 | 1 | Each |
| 104 | 70.2 | (b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\n(ii) 110mm dia. | item103 | 1 | Each |
| 105 | 70.3 | (iv) 75mm dia. | item104 | 1 | Each |
| 106 | 71 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trenches.\n(ii) 110mm dia. | item105 | 1 | Each |
| 107 | 71.1 | (iv) 75 mm dia. | item106 | 1 | Each |
| 108 | 71.2 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\n(ii) 110mm dia. | item107 | 1 | Each |
| 109 | 71.3 | (iii) 90mm dia. | item108 | 1 | Each |
| 110 | 72 | Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \na) In exposed surfaces or in trenches. \n(ii) 110mm dia. | item109 | 2 | Each |
| 111 | 72.1 | (iv) 75 mm dia. | item110 | 2 | Each |
| 112 | 72.2 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.\n(ii) 110mm dia. | item111 | 2 | Each |
| 113 | 72.3 | (iv) 75 mm dia. | item112 | 2 | Each |
| 114 | 73 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.\n(iv) 75mm dia. PVC cowel of ISI make | item113 | 1 | Each |
| 115 | 74 | Providing fiting & fixing C.I. Grating to the floors complete as directed and specified.\n(a) 110mm dia | item114 | 3 | Each |
| 116 | 75 | Providing fitting and fixing (600x600)mm 90mm thick C.I. Man hole cover and frame of 25 Kg. weight complete as directed and specified | item115 | 4 | Each |
| 117 | 76 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | item116 | 2 | Cum |
| 118 | 77 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | item117 | 4 | Each |
| 119 | 78 | Supplying fitting and fixing SFMC (SAVOIR-FAIRE MANUFACTURING CO. PVT.LTD.) brand 3 layered (outer green coloured,UV Stabilised,middle black coloured and inner white coloured (with antimicrobial property) fusion welded P.P.R (Polypropelene Random Co-Polymer) pipes of following size with all necessary fitting such as bend ,tee, elbow,reducer,plug and clamp etc. complete at all levels as directed and specified.\n(i) In exposed surface or trenches\n(b) 20 mm OD (PN-16) SFMC brand 3 layer P.P.R. pipe | item118 | 75.2 | Rm |
| 120 | 78.1 | (c) 25 mm OD (PN-16) SFMC brand 3 layer P.P.R. pipe | item119 | 17.84 | Rm |
| 121 | 79 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)\n(I) Essco make (Delux/Sumthing spl./Tropical) \n(a) Bib cock short body \n | item120 | 5 | Each |
| 122 | 80 | Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately)\nI) Brass stop cock (heavy) of Sant make\n(i) 15mm dia | item121 | 10 | Each |
| 123 | 80.1 | (iii) 25mm dia | item122 | 2 | Each |
| 124 | 81 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed.\n(III) Agmeco (classic) \n(a) Flat | item123 | 5 | Each |
| 125 | 82 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directe\n(b) 40 mm dia. | item124 | 2 | Each |
| 126 | 82.1 | (c) 25 mm dia.. | item125 | 4 | Each |
| 127 | 83 | Supplying and fitting ball valve as specified and directed..\na) 25 mm dia. (gun metal) | item126 | 2 | Each |
| 128 | 84 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed \nA) G.I. pipe with GI fittings\na) TATA / SAIL (Medium) \n(iii) 25mm diameter | item127 | 48.8 | Rm |
| 129 | 84.1 | (v 40 mm diameter | item128 | 93.98 | Rm |
| 130 | 85 | Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department.\niv) Bore hole of 150mm diameter | item129 | 123 | Rm |
| 131 | 86 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.\n(I) G.I. pipe\na) TATA / SAIL (Medium) socket should be welded to the pipes.\niv) 100mm diameter | item130 | 120 | Rm |
| 132 | 87 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed.\nA) G.I. pipe\na) TATA / SAIL (Medium)socket should be welded to the pipes.\niii) 40mm diameter | item131 | 120 | Rm |
| 133 | 88 | Supplying fitting and fixing GI filter 2.00 metre long. | item132 | 4 | Each |
| 134 | 89 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes\n(III) 1000 Lt capacity\n(a) Sintex make\n | item133 | 2 | Each |
| 135 | 90 | INTERNAL & EXTERNAL ELECTRICAL WORKS:- \nWiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete\nShort point up to 3.00 metre. length. | item134 | 21 | Each |
| 136 | 90.1 | Medium point up to 6.00 metre. Length. | item135 | 29 | Each |
| 137 | 90.2 | Long point up to 10.00 metre. Length. | item136 | 22 | Each |
| 138 | 91 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.\nMedium point up to 6.00 metre. Length. | item137 | 1 | Each |
| 139 | 91.1 | Long point up to 10.00 metre. Length. | item138 | 1 | Each |
| 140 | 92 | Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)\nExtra long point up to 15.00 metre. length.\n | item139 | 3 | Each |
| 141 | 92.1 | Extra long point up to 20.00 metre. Length. | item140 | 2 | Each |
| 142 | 93 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.\nWith 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item141 | 600 | Metre. |
| 143 | 93.1 | With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item142 | 90 | Metre. |
| 144 | 94 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.\nWith 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item143 | 30 | Metre. |
| 145 | 95 | Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan. | item144 | 5 | Each |
| 146 | 96 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete\nMedium point up to 6.00 metre. Length. | item145 | 30 | Each |
| 147 | 96.1 | Long point up to 10.00 metre. Length. | item146 | 62 | Each |
| 148 | 97 | Fitting and fixing of brackets on the wall in GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories such as GI/ MS switch board (ISI marked) with phenolic laminated sheet cover including connection as approved by the Deptt. as required complete. | item147 | 6 | Each |
| 149 | 98 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt. | item148 | 6 | Each |
| 150 | 99 | Supplying and fixing of Fan box (AKG or equivalent as approved by the Deptt.)with inbuild rod as required. | item149 | 49 | Each |
| 151 | 100 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.\nABB, Schneider MG, legrand, Hager make)\n 12 way SPN double door | item150 | 5 | Each |
| 152 | 101 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof reversible Double door (IP-43) surface mounting horizontal TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. \nABB, Schneider MG, legrand, Hager make) \n 4 way TPN (8+12) double door | item151 | 1 | Each |
| 153 | 102 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nC Series (Schneider MG, legrand, Hager make)\n6 to 32A | item152 | 52 | Each |
| 154 | 103 | Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nC Series (ABB, Schneider MG, legrand, Hager make)\n40A | item153 | 5 | Each |
| 155 | 104 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nC Series (ABB, Schneider MG, legrand, Hager make)\n40A | item154 | 1 | Each |
| 156 | 105 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n100/300mA sensitivity DP RCCB\n(ABB, Schneider MG, legrand, Hager make)\n40A | item155 | 3 | Each |
| 157 | 106 | Supplying, Fabrication, Erection Testing and commissioning dust and vermin proof totally enclosed cubical type compartmental made of 16 SWG CRCA Sheet with 30 X 30 X 5 mm M.S. Angle Copper Busbar complete as required including painting with Powder Coated Paint and Erection with 1:3:6 PCC Foundation with the following Component. Provision for APFC PANEL\nINCOMER\n300 Amps TPN BUSBAR of L & T or equivalent make) as approved by the Deptt..\nMETERING\nAM. VM. VSS. ASS. Indicators Lamp and other Accessories.\nOUTGOINGS\n14 Stage Relay with CT's MCB Protection\nAuto Manual Switch\nAir Circulator fan & MCB Protection\nIndicator\nPush button Start & Stop indication\nControl D.P. MCB\nControl Contactor | item156 | 1 | Each |
| 158 | 107 | Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item157 | 9 | Each |
| 159 | 108 | Extra for using salt 5 Kg and Charcoal 64 Kg in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | item158 | 9 | Each |
| 160 | 109 | Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | item159 | 500 | Metre. |
| 161 | 110 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | item160 | 60 | Metre. |
| 162 | 111 | Supplying & laying of 25X5mm size G.I. strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of G.I. nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt. | item161 | 125 | Metre. |
| 163 | 112 | Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt. | item162 | 20 | Metre. |
| 164 | 113 | Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid Copper tube having 85 mm dia. single prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with Brass nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt. | item163 | 1 | Each |
| 165 | 114 | Supplying, installation, testing and Commission of the following indoor CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection cable, as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department.\nStriplite luminaries complete with VPIT copper ballast/ Electronic ballast and decorative end cap and 1 X 36 / 40 watt Fluorescent tube.(Crompton Greaves make) Model- DSG1114LDB CROMGOLD / DSG1114LDBN CROM GOLD NEW / DSG1314EB CG GOLD / DSG 1414EB PLANET GOLD with Super Saver / Super Brite Lamp. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make) | item164 | 27 | Each |
| 166 | 115 | Supplying with fitting & fixing of the following integral type street light luminaries complete and consisting of single piece integral epoxy gray powder coated dia cast aluminium housing gasket, pot optic reflector, cast aluminium frame from heat resistance toughened clear glass cover and accessories such as Condenser, lamp Holder, Ballast, lamp etc. in the existing pole including making necessary connection as approved by the Deptt.)with 2× 2.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the department.\nPhilips make Cat No.SGP 401 1xSONT-250W For Lamp 1xSONT-250W (IP-65) / Wipro make : WST25250 For lamp 1x250W HPSV / Crompton Greaves make, SSSG1225IH/FG For lamp 1x250W HPSV (T)/Havells LHBW00125036 1x250W. | item165 | 10 | Each |
| 167 | 116 | Supplying and installation and commissioning of vermin and dust proof totally enclosed double door cubical type compartmental floor mounting panel board of size 1.20 m ×1.00 m ×0.50 m made of 16 SWG1.66mm) thick CR sheet and 35 mm × 35 mm × 6 mm size angle and 35 mm ×6 mm flat iron having 4 nos legs at the bottom and G.I. Sheet reefing on the top complete painting with 2 coats of red oxide metal primer and 2 coats of enameled paint. The panel board is to be erected in 1:3:6 RCC pole foundation including excavation of trench and brick soling etc. complete neatly internal wiring done as specified and directed by the department comprising of the following electrical items.\n1. 40 Amp 4 pole 415 Volt 50 Hz MCCB as incomer - 1 no\n2. 32 Amp 2 pole open execution with HBC fuse SDFU unit as outgoing - 3 nos.\n3. 25 mm × 5 mm size 4 strip copper Bus-Bar- 1 set\n4. 40 Amp 4 pole ON-OFF poser contactor - 1 No.\n5. Surface mounting timer switch - 1 No.\n6. 63 Amp bakelite HBC fuse kit-kat - 3 Nos | item166 | 1 | Each |
| 168 | 117 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.\nDomestic\nTrans Air 300 mm sweep (Crompton make) | item167 | 4 | Each |
| 169 | 118 | Supplying fitting and fixing of ceiling fan regulator including connections etc. complete as required. \nElectronic Type | item168 | 15 | Each |
| 170 | 119 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) .\n3 Core A2XWY A2XFY\n4.00 Sq.mm 3 Core armoured U.G. cable | item169 | 170 | Metre |
| 171 | 119.1 | 6.00 Sq.mm 3 Core armoured U.G. cable | item170 | 150 | Metre |
| 172 | 119.2 | 3 & 1/2 Core A2XFY\n25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | item171 | 25 | Metre |
| 173 | 119.3 | 70.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | item172 | 65 | Metre |
| 174 | 120 | Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make or equivalent)\nCore - 3 A2XWY A2XFY\n 4.00 Sq.mm 3 Core U.G. cable in 25mm dia medium duty G.I. pipe | item173 | 10 | Metre |
| 175 | 120.1 | 6.00 Sq.mm 3 Core U.G. cable in 32mm dia medium duty G.I. pipe | item174 | 20 | Metre |
| 176 | 120.2 | Core - 3 & 1/2 A2XWY A2XFY\n 25.00 Sq.mm 3&1/2 Core U.G. cable in 40mm dia medium duty G.I. pipe | item175 | 5 | Metre |
| 177 | 120.3 | 70.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty G.I. pipe | item176 | 5 | Metre |
| 178 | 121 | Supplying including installation of cast iron cable marker as specified and directed by the deptt. | item177 | 20 | Metre |
| 179 | 122 | Supplying including installation of the Octagonal poles shall be designed to withstand the maximum wind speed of 169 km/hr. The top loading i.e. area and weight of fixtures are to be considered to calculate maximum deflection of the poles and the same shall meet the requirement of BS:5649 Part VI 1982. The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding of the pole shaft. The welding of the pole shaft shall be done by Submerged Welding process. All octagonal pole shafts shall be provided with the rigid flange plate of suitable thickness with provision for fixing 4 foundation bolts. The base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside. The welding shall be done as per process approved by Third Party Inspection agency. (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezone make) \nPole Type BOP or equivalent-1030 Height 10 m The materials of the pole as follows : Conforming to grade S355JO Conforming to grade S355JO, Base Plate :- Fe 410 Conforming to IS 226/ IS 2062, Foundation Bolts :- 6.8 Gr. As per IS 1367, Pole Sections:- The Octagonal Poles shall be in single piece with single longitudinal welding join. Galvanization :- The poles shall be hot dip galvanized as per IS 2629 / IS 2633 / IS 4759 standards with average coating thickness of 65 micron. The galvanizing shall be done in single dipping. Door opening :- The Octagonal poles shall have door of approximate 500 mm length at the elevation of 500 mm from the base plate. The door shall be vandal resistance and shall be weather proof to ensure safety of inside connection as approved by the Depts.. \nThe door shall be flush with the exterior surface and shall have suitable locking arrangement. The pole shall be adequately strengthened at the location of the door compensate for the loss in section. There shall also be suitable arrangement for the purpose of earthing, Smart pack Junction box with 6 MCB & Terminals for mounting inside base compartment of Pole. Top Dia. :- (A/ 70, Bottom Dia.:- (A/ 175, Sheet Thickness :- 3mm, Base Plate Dimensions :- (L x B x 275 x 275 x 16, Foundation Bolt Size:- (no. x dia.) 4 x 24 Dia, Pitch Circle Dia. (PC :- 270, Bolt Length:- 750, Projected Bolt Length :-125, Anchor plate thickness :- 4 mm, Pole Foundation :-The octagonal poles shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater rigidity. Foundation :- The foundation shall be done with ( Earth work :- 2.04 cubic Meters.RCC :- 1:1.5 : 3 proportion 0.65 cubic metres. Steel:- 22.43 Kg.\n Shuttering :- 4.32 square metres. = 22.43 Kg. | item178 | 10 | Each |
| 180 | 123 | Supplying including fitting and fixing of Hot Dip galvanised arm bracket for installation of luminaries. \n Header with top cap 300 mm long pipe of thickness 3 with arrangement to fix on pole top with 3 Nos. of bolts. \ni Armed of required length size 48.3mm out side dia x 3.25mm thick (BAJAJ/ PHILIPS/ VALMONT/ PARUTHI ENGR/Nezone make) \n Stiffener plate from arm of the following types :\n Single arm bracket 1000mm long for 3m to 10 metre. Poles. | item179 | 10 | Each |
| 181 | 124 | Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make)\nEnergy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make | item180 | 15 | Each |
| 182 | 125 | Supplying with fitting fixing of T 5 luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection cable, as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. \nBATTEN LIGHT, ADRENO V 28 W TWG 207 with 1x28 W T-5 Fluorescent tube. (Philips make or equivalent) | item181 | 10 | Each |
| 183 | 126 | Supplying, installation, testing and commissioning of the following CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc in the ceiling including supplying ball and socket arrangement suspension down rod of 19 mm dia H.G conduit of required length max 0.75 cm including making necessary connection cable, as approved by the Deptt.)with 1.5 sq. mm PVC insulated single core copper conductor as reqd. and as directed by the Deptt.\nGGX 620 2 x 28 W TL5 EBP M1, 240 V Philips make LINE LIGHT Surface mounted and Suspended luminaries including lamps. or equivalent (Equivalent will be selected by the deptt considering the mother items rate). | item182 | 58 | Each |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
