Water Resources Department-WRD has published Assam Integrated Flood And Riverbank Erosion Risk Management Project , Sub- Reach - Palasbari ( Construction Of Office Building And Conference Hall At P . G . P W . R Division , Mirza ) . Submission Date for this Tender is 14-07-2020. Building Work Tenders in MIRZA Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Jun-2020 | EXTENSION NOTICE | Date | 14-07-2020 |
| Name of Work: Assam integrated Flood and Riverbank Erosion Risk Management Project, Sub- Reach - Palasbari (Construction of Office Building and Conference hall at P.G.P W.R Division, Mirza ) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | (A) RCC BUILDING\nEARTHWORK IN EXCAVATION\nEarth work in excavation for Foundation trenches of walls, retaining walls, footing of columns, steps septic tanks etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified\n(A) Up-to a depth of 2m below the existing ground level.\n(a) In ordinary soil. | BI01010001010000000000000515BI0100001113 | 136.62 | Cum |
| 2 | 2 | Earth sand filling in plinth layers not more than 150 mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties & taxes as may be necessary. (C) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | BI01010001010000000000000515BI0100001114 | 78.08 | Cum |
| 3 | 3 | PLAIN CEMENT CONCRETE WORKS\nPlain cement concrete works with coarse aggregate of sizes 13 mm to 32 mm in foundation bed for footing, steps, walls, brick works etc. as directed and specified including curing complete (Shuttering where necessary shall be measured and paid separately. | BI01010001010000000000000515BI0100001115 | 4.27 | Cum |
| 4 | 4 | REINFORCED CEMENT CONCRETE WORKS\nProviding and laying plain/reinforced cement concrete works cement with coarse sand and & 20mm down graded stone aggregate, including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately). \n(A) Using Mixer Machine\n In sub structure upto plinth level:\nP) Using admixture,plasticiser etc for air entraining,water reducing purposes including addition of agent for changing normal setting time of concrete as required. Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick upto plinth level.\n(b) M20 or prop. 1:1.5:3 | BI01010001010000000000000515BI0100001116 | 32.32 | Cum |
| 5 | 5 | (B) In super structure from plinth level up to 1st floor level. P) Using admixture,plasticiser etc for air entraining,water reducing purposes including addition of agent for changing normal setting time of concrete as required. (ii) Columns, pillars, posts, struts suspended floor, roof, landing, shelf and support, balcony, lintel, beam, girder, bressumer, cantilever, staircase, (except spiral stair case and landing) including preparing the top surface and furnishing of nosing. \n(b) With M-20 concrete or prop. 1:1.5:3 | BI01010001010000000000000515BI0100001117 | 61.68 | Cum |
| 6 | 6 | BRICKWORK\nProviding soling in foundation and under floor at all levels with stone/ best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the sub grade as directed including all labour and materials complete.\n(a) Brick flat soling. | BI01010001010000000000000515BI0100001118 | 14.08 | Sq.m |
| 7 | 7 | Brick work in cement mortar with 1st class brick including racking out joints and curing complete as directed \n(I)In substructure up to plinth level including dewatering if necessary.\n(b) In prop. 1:5 | BI01010001010000000000000515BI0100001119 | 21.57 | Cum |
| 8 | 8 | 1st class brick nogged wall in cement mortar embedded with protruding rod in column including racking out joints and curing complete as directed in super structure above plinth level upto 1st floor level (protruding M.S. rod/ tor steel will be measured and paid separately under relevant item of steel work). (A)112 mm thick brick wall.\n(a) In cement mortar in proportion 1:4(1cement: 4sand). | BI01010001010000000000000515BI0100001120 | 503.01 | Sq.m |
| 9 | 9 | TIMBER SHUTTERING\nProviding from work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced concrete and plain concrete work in:\nFoundation, footings, bases of columns, pile cap, raft and mass concrete works etc.\n(a) Using 38mm thick plank. | BI01010001010000000000000515BI0100001121 | 68.97 | Sq.m |
| 10 | 10 | Sides of tie beams, grade beams etc. at or below ground level.\n(a) Using 38mm thick plank | BI01010001010000000000000515BI0100001122 | 124.72 | Sq.m |
| 11 | 11 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.\n(i) Using 38mm thick plank. | BI01010001010000000000000515BI0100001123 | 255.4 | Sq.m |
| 12 | 12 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (ii) Using 25mm thick plank. | BI01010001010000000000000515BI0100001124 | 236.98 | Sqm |
| 13 | 13 | CEMENT CONCRETE FLOORING\n65mm thick cement floor consisting of 50mm under layer of cement concrete 1:3:6 and 12mm thick wearing layer in cement concrete 1:1:2 laid in panels & finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg per Sq.m. Of floor area), wearing layer is to be laid in panels including curing complete as directed. | BI01010001010000000000000515BI0100001125 | 199.76 | Sq.m |
| 14 | 14 | FLOOR TILES\nProviding VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). b) Executive range.\nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make | BI01010001010000000000000515BI0100001126 | 399.53 | Sq.m |
| 15 | 15 | CEMENT PLASTERING\n10 mm thick cement plaster in single coat on fair side of brick/ concrete wall for interior plastering upto 1st floor level including arises and / or rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. \n(b) In cement mortar 1: 4 | BI01010001010000000000000515BI0100001127 | 848.56 | Sq.m |
| 16 | 16 | 20 mm thick cement plaster in two coats, backing coat 15mm and finishing coat 5mm thick on rough side of single or half brick wall for interior plastering upto 1st floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. \nA) On rough side (backing coat 15mm and finishing coat 5mm thick).\n(b) In cement mortar 1: 4 | BI01010001010000000000000515BI0100001128 | 290.51 | Sq.m |
| 17 | 17 | DOORS\nProviding and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core. (ii) 35 mm thick . | BI01010001010000000000000515BI0100001129 | 25.7 | Sq.m. |
| 18 | 18 | WINDOWS AND VENTILATORS \nProviding, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (b) 3 Track sliding window. (iv) 5 mm clear glass. | BI01010001010000000000000515BI0100001130 | 60.21 | Sq.m |
| 19 | 19 | CEMENT PAINT & PRIMER\n(a)Applying one coat of cement primer. Of approved brand and manufacture on new wall surface after thoroughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | BI01010001010000000000000515BI0100001131 | 1145.55 | Sq.m |
| 20 | 20 | WALL PUTTY\nProviding two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department. | BI01010001010000000000000515BI0100001132 | 1145.55 | Sqm |
| 21 | 21 | WALL PAINTING\nWall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | BI01010001010000000000000515BI0100001133 | 1145.55 | Sqm |
| 22 | 22 | Extra over item no 13.4.7 above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). \n(a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | BI01010001010000000000000515BI0100001134 | 1145.55 | Sqm |
| 23 | 23 | EXTERIOR PAINTS/ COATINGS \nApplying one self priming coat of acrylic emulsion coating of Unicem “Rakshak” brand by thinning 1ltrs of paints with 1ltrs of water over freshly plastered wall surface after thoroughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department.\nb) Unicem Rakkshk. | BI01010001010000000000000515BI0100001135 | 290.51 | Sq.m |
| 24 | 24 | Finishing wall with two coats acrylic emulsion exterior coatings of Unicem “Rakshak” brand 0f required shade by thinning 1ltr. Of paint with 750ml of water to give an even shade after thoroughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.\nb) Unicem Rakkshk | BI01010001010000000000000515BI0100001136 | 855.04 | Sq.m |
| 25 | 25 | Extra over item no.13.5.2 above for every subsequent coat of acrylic emulsion exterior coatings of Unicem 'Rakshak' brand of required shade. | BI01010001010000000000000515BI0100001137 | 290.51 | Sq.m |
| 26 | 26 | SPECIAL WATHER PROOF COLOURING\nFinishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Dulux (ICI) paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats). | BI01010001010000000000000515BI0100001138 | 855.04 | Sq.m |
| 27 | 27 | Supplying and applying interior/exterior walls/ floors/ roofs one coat of Epoxy Primer of Jhonson & Nicholson/ Nerolac brand as priming coat after cleaning and clearing the surfaces as specified and directed and then applying two coats of Epoxy paints of Jhonson & Nicholson/ Nerolac brand of required shade on walls/ floors/ roof surfaces as specified and directed complete including scaffolding at all levels. | BI01010001010000000000000515BI0100001139 | 878.13 | Sq.m |
| 28 | 28 | REINFORCEMENT\nSupplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. code for R.C.C work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc complete (Up to 1st floor level). \n(a) From Primary Producer: TATA/SAIL/Jindal Steel/Shyam steel/RINL. TMT Corrosion resistant steel(CRS) reinforcement bar. | BI01010001010000000000000515BI0100001140 | 101.41 | Qtl |
| 29 | 29 | ROOF TRUSS\nProviding, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 | BI01010001010000000000000515BI0100001141 | 35.2 | Qtl |
| 30 | 30 | ROOFING\nProviding Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement. | BI01010001010000000000000515BI0100001142 | 178.45 | Sq.m |
| 31 | 31 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement. (iv) 0.55 mm thick | BI01010001010000000000000515BI0100001143 | 31 | RM |
| 32 | 32 | GRILLS\nProviding, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C. | BI01010001010000000000000515BI0100001144 | 144 | kg |
| 33 | 33 | STEEL RAILING\nProvidingand fixing Stainless steel (Gr 304) railing made of hollow tubes, chanels, plates etc..as specified and directed by department. | BI01010001010000000000000515BI0100001145 | 77.89 | kg |
| 34 | 34 | GYPBOARD CEILING\nSupplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). \n\n | BI01010001010000000000000515BI0100001146 | 136.04 | Sqm |
| 35 | 35 | PAINTING ON STEEL AND OTHER METAL\nApplying priming coat over new steel and other metal surface over 100m in width or girth after preparing the surface by thoroughly cleaning oil , grease, dirt and other foreign matter and scoured with wire brushes , fine steels, wood scrapers and sand paper. \n(a) With ready mixed “red-lead /red oxide” primer. | BI01010001010000000000000515BI0100001147 | 20.7 | Sq.m |
| 36 | 36 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.\nb). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | BI01010001010000000000000515BI0100001148 | 20.7 | Sq.m |
| 37 | 37 | PRE-CONSTRUCTION ANTI-TERMITE TREATMENT\nPre construction anti-termite treatment with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water. This provides emulsion containing 1% chloropirophose solution (by weight) applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmX30mm all over the walls and making rod holes @ 150 mm apart up to ground level below and applying emulsion @ 11 litres per square meter of vertical plinth wall surface inside the building so as to sock the soil with emulsion up to ground level and refill the holes and channel with the original materials obtained in marking channels ( supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. | BI01010001010000000000000515BI0100001149 | 154.29 | Sq.m |
| 38 | 38 | PLINTH PROTECTION\nProviding plinth protection with bricks laid on edge and grouted with cement mortar 1:4 and finishing with cement pointing in prop. 1:1 complete. | BI01010001010000000000000515BI0100001150 | 97.95 | Sq.m |
| 39 | 39 | (B) WATER SUPPLY.\nSupplying, fitting and fixing PVC pipes of 6 kg/cm2 ( Supreme / prince) or other ISI approved including joining, fitting and fixing wiyh clamps etc. as necessary complete at all levels including below G.L as directed and specified.\n(a) In exposed surfaces or in trenches. | BI01010001010000000000000515BI0100001151 | 9 | Each |
| 40 | 40 | Supplying, fitting and fixing PVC plain single tee of ( Supreme / prince) or other ISI approved including joining, fitting and fixing wiyh clamps etc. as necessary complete at all levels including below G.L as directed and specified.\n(ii) 110mm dia | BI01010001010000000000000515BI0100001152 | 5 | Each |
| 41 | 41 | Supplying, fitting and fixing PVC plain single tee of ( Supreme / prince) or other ISI approved including joining, fitting and fixing wiyh clamps etc. as necessary complete at all levels including below G.L as directed and specified.\n(iv) 75 mm dia | BI01010001010000000000000515BI0100001153 | 7 | Each |
| 42 | 42 | Supplying, fitting and fixing 87.5 degree PVC bend with door of ( Supreme / prince) or other ISI approved including joining, fitting and fixing wiyh clamps etc. as necessary complete at all levels including below G.L as directed and specified.\n(a) In exposed surfaces or in trences \n (ii) 160 mm dia | BI01010001010000000000000515BI0100001154 | 24 | Each |
| 43 | 43 | Supplying, fitting and fixing 87.5 degree PVC bend with door of ( Supreme / prince) or other ISI approved including joining, fitting and fixing wiyh clamps etc. as necessary complete at all levels including below G.L as directed and specified.\n(a) In exposed surfaces or in trences \n(ii) 110mm dia | BI01010001010000000000000515BI0100001155 | 10 | Each |
| 44 | 44 | Supplying, fitting and fixing PVC cleaning pipe of ( Supreme / prince) or other ISI approved including joining, fitting and fixing wiyh clamps etc. as necessary complete at all levels including below G.L as directed and specified.\n(ii) 110mm dia | BI01010001010000000000000515BI0100001156 | 5 | Each |
| 45 | 45 | Supplying, fitting and fixing PVC cleaning pipe of ( Supreme / prince) or other ISI approved including joining, fitting and fixing wiyh clamps etc. as necessary complete at all levels including below G.L as directed and specified.\n(iv) 75 mm dia | BI01010001010000000000000515BI0100001157 | 7 | Each |
| 46 | 46 | Providing , fitting and fixing PVC cowel of ISI make complete as directed and specified.\n(ii) 110mm dia | BI01010001010000000000000515BI0100001158 | 5 | Each |
| 47 | 47 | Providing , fitting and fixing PVC cowel of ISI make complete as directed and specified.\n(iv) 75 mm dia | BI01010001010000000000000515BI0100001159 | 7 | Each |
| 48 | 48 | Providing , fitting and fixing ( 300 x 230) mm C.I. yard gully higed Grating complete as directed and specified.\n(b) 75 mm dia | BI01010001010000000000000515BI0100001160 | 5 | Each |
| 49 | 49 | Construction of filter bed in soak pit including earth work in excavatio I soil and then filling up of the trench with brick bats / charcoal covered with each other over a layer of AC plain sheet above brick bat filling complete as dircted. | BI01010001010000000000000515BI0100001161 | 6 | Cum |
| 50 | 50 | Construction of inspection pit inside measured 450mmx 450 mm flush with 100mm dia HCI/PVC pipes and cement concrte base in proportion 1:3:6 over flat brick soiling, 12 cm brick wall in cement mortar in propotion 1:4 finished with 13 mm cement plaster in proportion 1:2 in side wall and floor 450mmx 450 mm air tight C.I. inspection pit cover and frame complete including supplying of materials necessary excavation of pit as directed. | BI01010001010000000000000515BI0100001162 | 6 | Each |
| 51 | 51 | Providing and fixing 3 layer (Outer green / GREY coloured UV Stabilised, middle black coloured UV Stabilised and inermost layer white coloured with antimicrobial property) Fusion welded PP-R ( Poly propylene-random copolymer) Pipes, SDR 7.4 having thermal stability for hot and cold water supply conforming IS 15801-2008 including all plain PP-R fittings and brass threaded PP-R fitting and clamping, cutting and making good to the damages. \n(A) Exposed or in trenches\nSFMC/ FUSION brand or other brand of equivalent quality.\na) PN-16 Pipe,16mm OD,SDR-7.4 | BI01010001010000000000000515BI0100001163 | 6 | Rm |
| 52 | 52 | (A) Exposed or in trenches\nSFMC/ FUSION brand or other brand of equivalent quality.\nd) PN-16 Pipe,32 mm OD,SDR-7.4 | BI01010001010000000000000515BI0100001164 | 98.5 | Rm |
| 53 | 53 | (A) Exposed or in trenches\nSFMC/ FUSION brand or other brand of equivalent quality.\nf) PN-16 Pipe,50 mm OD,SDR-7.4 | BI01010001010000000000000515BI0100001165 | 4 | Rm |
| 54 | 54 | (B) Concealed pipe with cutting chases & making good the walls\nSFMC/ FUSION brand or other brand of equivalent quality.\na) PN-16 Pipe,16mm OD,SDR-7.4 | BI01010001010000000000000515BI0100001166 | 84 | Rm |
| 55 | 55 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.\n(a) 50 mm | BI01010001010000000000000515BI0100001167 | 1 | Each |
| 56 | 56 | Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.\n(b) 40 mm | BI01010001010000000000000515BI0100001168 | 6 | Each |
| 57 | 57 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed \nD) PP-R pipe with PP-R fittings\n(Using SFMC/ FUSION brand pipe)\niv) 32 mm diameter | BI01010001010000000000000515BI0100001169 | 60 | Rm |
| 58 | 58 | Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department.\nvi) Bore hole of 200mm diameter | BI01010001010000000000000515BI0100001170 | 46 | Rm |
| 59 | 59 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.\nII. PVC PIPE\nviii) Bore hole of 200 mm dia | BI01010001010000000000000515BI0100001171 | 19 | Rm |
| 60 | 60 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed.\nb)ITC/NEZONE (Medium)socket should be welded to the pipes.\nii) 32mm diameter | BI01010001010000000000000515BI0100001172 | 36 | Rm |
| 61 | 61 | Supplying fitting and fixing ISI approved PVC filter 3.00 metre long.\nvi) 200mm diameter | BI01010001010000000000000515BI0100001173 | 27 | Rm |
| 62 | 62 | (C) SANITARY.\n Providing fitting and fixing viterous water closet sqatting pan ( Indian type WC orissa pattern) with all fitings and fixures complete includig cutting and making good to the walls and floors whereever required.(Flushing clustern to be paid separtely).\n (A) Parryware Make. (a) White | BI01010001010000000000000515BI0100001174 | 1 | Each |
| 63 | 63 | Providing fitting and fixing viterous chaina pedestal type water cost ( Europeen type Wc pan 400 mm high) with seat and lead, cp brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fitting and brackets, requierd.( Flushing Cistern to be paid separately). A) Parryware make\n(a) white (i) Universal closest 5trap ( Cat No. C0271) (Anglo Indian) | BI01010001010000000000000515BI0100001175 | 4 | Each |
| 64 | 64 | Supplying, fitting and fixing PVC flushing Cistern with alll internal fittings with CII brackets including fiting and fixing standard site CP flush pipe, union clamps etc. complete as directed and specified ( pipes will be measured separtley.\na) white \n(ii) Deluxe Single Flush ( Cat No C8090 C8055) | BI01010001010000000000000515BI0100001176 | 4 | Each |
| 65 | 65 | Providing viterous China wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including paintings of fittings and brackets, cutting and making good the walls wherever required.( Pilar cock, stop cocks, waste coupling are to be paid separately.\n (A) Parryware Make. (a) White\n(i) Duke 660 x 495 (Cat No. C8416/27)(white/coloured) | BI01010001010000000000000515BI0100001177 | 2 | Each |
| 66 | 66 | Providing viterous China wash basin with CI/MS brackets, C.P brass chain with plug, PVC waste pipe including paintings of fittings and brackets, cutting and making good the walls wherever required.( Pilar cock, stop cocks, waste coupling are to be paid separately.\n (A) Parryware Make. (a) White\n(ii) Vanice 620 x 485 x 850 ( Cat No.C841 P/R)( white/ coloures) | BI01010001010000000000000515BI0100001178 | 3 | Each |
| 67 | 67 | Providing fitting and fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC. Waste pipe etc. complete including painting the fittings, cuttig & making good the walls wherever required.( Sink cock, stop cocks, waste coupling are to be paid separtely. \n(B) Nitrali\n(iii) Gliser small ( Bowl size - 410x330x150) | BI01010001010000000000000515BI0100001179 | 1 | Each |
| 68 | 68 | Providing fitting and fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC. Waste pipe etc. complete including painting the fittings, cuttig & making good the walls wherever required.( Sink cock, stop cocks, waste coupling are to be paid separtely. \n(B) Nitrali\n(i)Glister jumbo( Bowl size - 610x460x254) | BI01010001010000000000000515BI0100001180 | 1 | Each |
| 69 | 69 | Providing fitting and fixing Mirror with plastic frame of size 500x400 mm complete as directed and specified. | BI01010001010000000000000515BI0100001181 | 3 | Each |
| 70 | 70 | Providing fittiing and fixing Decorative mirror complete as directed and specified.\n(A) Parryware Make, (a)Size 800x600 mm | BI01010001010000000000000515BI0100001182 | 2 | Each |
| 71 | 71 | Glass shelf with C.P. guard rail\n(ii)Sona make ( Cat. No TR-0701) (a) 450mm | BI01010001010000000000000515BI0100001183 | 3 | Each |
| 72 | 72 | Glass shelf with C.P. guard rail\n(iii) Jaquar make (a) Continental 550 mm long (Cat. No CAN- 1171 N) | BI01010001010000000000000515BI0100001184 | 2 | Each |
| 73 | 73 | Providing fitting and fixing recessed soap tray/ soap dish complete as directed and specified. \n(A) Parryware Make, (ii) Wall Soap tray ( Cat NO- C9951) | BI01010001010000000000000515BI0100001185 | 3 | Each |
| 74 | 74 | Providing fitiing and fixing CP soap tray/soap dish complete as directed and specified.\n(i)Jaquar Mkae (b) Queens(Cat.No.AQN-7731) | BI01010001010000000000000515BI0100001186 | 2 | Each |
| 75 | 75 | Providing fitting and fixing Liquid soap dispenser and liquid soap container complete as directed and specified.\n(i) Jaquar Make (a) Continental ( Cat.No. CAN- 1135N) with glass bottle) | BI01010001010000000000000515BI0100001187 | 2 | Each |
| 76 | 76 | Providing fitting and fixing CP towel rail complete as directed and specified.\n(a) Jaquar Make\n (i)Continental 300 mm for wash basin ( Cat. No. CAN-1101N) | BI01010001010000000000000515BI0100001188 | 2 | Each |
| 77 | 77 | Providing fitting and fixing CP towel rail complete as directed and specified.\n(a) Jaquar Make\n(ii)Continental 600mm ( Cat. No. CAN=1111N) | BI01010001010000000000000515BI0100001189 | 2 | Each |
| 78 | 78 | Providing fitting and fixing CP towel rail complete as directed and specified.\n(a) Jaquar Make\n(b)Sona make (ii) Towel rail Diplomat 450 mm long ( Cat. No.TR-0605) | BI01010001010000000000000515BI0100001190 | 3 | Each |
| 79 | 79 | Providing fitting and fixing chrome plated towel ring complete as directed and specified.\n(a)Jaquar Make \n(i) Continental towel ring square ( Cat. No.ACN-1121) | BI01010001010000000000000515BI0100001191 | 3 | Each |
| 80 | 80 | Providing fitting and fixing chrome plated toilet paper holder complete as directed and specified.\n(a) Jaquar Make\n (vi) Kubix toilet roll holder ( Cat. No. AKB-35755) | BI01010001010000000000000515BI0100001192 | 4 | Each |
| 81 | 81 | Providing fitting and fixing chrome plated waste coupling complete as directed and specified.\n(a) Jaquar Make \n(i) 32 mm (HT/FT). (Cat.No.ALD-705/7090 | BI01010001010000000000000515BI0100001193 | 5 | Each |
| 82 | 82 | BIB-COCK\nSupplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) \nii.Jaquare make \n(b)Queen's collection /The Stealth Rangers (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)\ni) C.P. bibcock with wall flange | BI01010001010000000000000515BI0100001194 | 10 | Each |
| 83 | 83 | STOP-COCK\nSupplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately)\nI. Jaquar \n(b) Queen's collection/ The Stealth Ranger (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use)\n(i) Angular stop cock with wall flange | BI01010001010000000000000515BI0100001195 | 14 | Each |
| 84 | 84 | PILLAR-COCK\nSupplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \nII. Jaguar make \n(b)Long neck with areator | BI01010001010000000000000515BI0100001196 | 1 | Each |
| 85 | 85 | SINK-COCK\nSupplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) \nV. Jaquar brand\na) Continental / Clarion\ni) Sink cock with swinging casted spout | BI01010001010000000000000515BI0100001197 | 2 | Each |
| 86 | 86 | SHOWER\nSupplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately)Jaquar make.c) Stealth Rangers\n(i) Overhead rose shower with revolving joint & 150mm long shower arm with wall flange | BI01010001010000000000000515BI0100001198 | 3 | Each |
| 87 | 87 | BASIN MIXER\nSupplying, fitting and fixing Chrome Plated (C.P.) basin mixer complete as directed. \nLauret make\ni) Central hole basin mixer Cat No. 1211 for wash basin | BI01010001010000000000000515BI0100001199 | 4 | Each |
| 88 | 88 | WALL MIXER\nSupplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. \nv) Wall mixer 3 in 1 system with provision for both telephonic shower and overhead shower complete with 115mm long bend pipe Cat No.1119 | BI01010001010000000000000515BI0100001200 | 3 | Each |
| 89 | 89 | ELECTRICAL WORKS (INTERNAL)\nWiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete\nShort point up to 3.00 metre. length. | BI01010001010000000000000515BI0100001201 | 6 | Each |
| 90 | 90 | Medium point up to 6.00 metre. Length. | BI01010001010000000000000515BI0100001202 | 8 | Each |
| 91 | 91 | Long point up to 10.00 metre. Length. | BI01010001010000000000000515BI0100001203 | 2 | Each |
| 92 | 92 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.\n Short point up to 3.00 metre. length. | BI01010001010000000000000515BI0100001204 | 2 | Each |
| 93 | 93 | Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan. | BI01010001010000000000000515BI0100001205 | 5 | Each |
| 94 | 94 | Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.\nWith 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | BI01010001010000000000000515BI0100001206 | 390 | Metre. |
| 95 | 95 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.\nWith 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | BI01010001010000000000000515BI0100001207 | 150 | Metre. |
| 96 | 96 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | BI01010001010000000000000515BI0100001208 | 60 | Metre. |
| 97 | 97 | With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | BI01010001010000000000000515BI0100001209 | 30 | Metre. |
| 98 | 98 | Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt.)as required Without Lamp | BI01010001010000000000000515BI0100001210 | 6 | Each |
| 99 | 99 | Supplying and fixing of bulk head fitting suitable for CFL lamp complete with all accessories including connection as approved by the Deptt.)as required. Without lamp. | BI01010001010000000000000515BI0100001211 | 3 | Each |
| 100 | 100 | Supplying and fixing of Call bell ( Buzzer ) including 5/ 6 amp capacity button piano type bell push switch including connection as approved by the Deptt.)as required. | BI01010001010000000000000515BI0100001212 | 1 | Each |
| 101 | 101 | Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make)\nEnergy efficient 5-star 1200 mm sweep Fusion 5 star (Havells or equivalent make) | BI01010001010000000000000515BI0100001213 | 2 | Each |
| 102 | 102 | Supplying fitting and fixing of ceiling fan regulator including connections etc. complete as required. \nElectronic Type type | BI01010001010000000000000515BI0100001214 | 2 | Each |
| 103 | 103 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.\n Domestic\nPower Flow 225 mm sweep (ORIENT make) | BI01010001010000000000000515BI0100001215 | 2 | Each |
| 104 | 104 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting vertical TPN MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.\n8 way TPN (8+24) double door | BI01010001010000000000000515BI0100001216 | 1 | Each |
| 105 | 105 | Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nSupplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n25 KA 415V 50 Hz 4P MCCB \n(Schneider, legrand, Siemens, Indo Asian make) \n63A | BI01010001010000000000000515BI0100001217 | 1 | Each |
| 106 | 106 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.\nABB, Schneider MG, legrand, Hager make)\n 8 way SPN double door | BI01010001010000000000000515BI0100001218 | 1 | Each |
| 107 | 107 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nB Series (Schneider MG, legrand, Hager make)\n6 to 32A | BI01010001010000000000000515BI0100001219 | 8 | Each |
| 108 | 108 | Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt. | BI01010001010000000000000515BI0100001220 | 2 | Each |
| 109 | 109 | Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt. | BI01010001010000000000000515BI0100001221 | 2 | Each |
| 110 | 110 | Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | BI01010001010000000000000515BI0100001222 | 20 | Metre. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
