Construction Of Girls Hostel At Malda Womens College Under English Bazar Dev . Block , Malda, English Bazar, Malda-West Bengal

TDR : 24521592

Tender Notice
BOQ

Expired

English Bazar, Malda , West Bengal

Tender Brief : Construction Of Girls Hostel At Malda Womens College Under English Bazar Dev . Block , Malda

Document Fees
₹ 10000 /-

EMD
₹ 220254.0 /-

Tender Value
₹ 1.10 Crore /-

Submission Date
26-06-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Construction of Girls Hostel at Malda Womens College under Malda Zilla Parishad, Malda HQ, Project ID- MD192021385S000.
1	1	Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.	300	m³
2	2	Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.	550	m²
3	3	Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety]	42	m³
4	4	Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight inctuding fitting, fixing and striking out after completion of works (upto, roof of ground floor) direction of Engineer-In-Charge.( In Ground Floor) (f) 25 mm to 30 mm shuttering without staging in foundation	320	m²
5	5	(2) 25 mm to 30 mm thick wooden shuttering as per & direction of Engineer-In-Charge.	556	m²
6	6	In 1st Floor	556	m²
7	7	2nd floor	75	m²
8	8	Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety. In ground floor	151	m³
9	9	in 1st floor	64	m³
10	10	In 2nd floor	20.1	m³
11	11	Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto4m (i) Tor steel / Mild Steel, JSW / JSPL / SHYAM / SRMB / BMASL / ELETROSTEEL / SSL	21	MT
12	12	In 1st floor	9.115	MT
13	13	In 2nd floor	1.01	MT
14	14	Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth	35	m³
15	15	(b) In superstructure, ground floor	44	m³
16	16	in 1st floor	45	m³
17	17	in 2nd floor	16	m³
18	18	25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 } using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [ Bitument to be’ supplied by the Agency) .	17	m²
19	19	125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. ek cae es un emievngpei est i =	220	m²
20	20	In 1st floor	220	m²
21	21	In 2nd floor	51	m²
22	22	(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (Payment to be made on measurement of finished quantity)	145	m³
23	23	Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hige and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) - (ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 Cm.(b) Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak., Gr. Floor.	19	m²
24	24	Ist Floor	19	m²
25	25	2nd floor	1.89	m²
26	26	Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (e) Sal : Malayasian.	0.525	m³
27	27	1st floor	0.525	m³
28	28	2nd floor	0.038	m³
29	29	Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to \|S 7452- 1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. In Ground floor Flash butt welded windows and ventilators. (b) Openable steel windows as per IS sizes with side hung shutters and horizontal glazing bars with / without fixed type. ventilators.[The extra rate admissible for the openable portion only] (Gr Floor)	30	m²
30	30	In 1st Floor	33	m²
31	31	In 2nd floor	2.5	m²
32	32	(iv) Two point nose steel handle including fitting and fixing. (Ground floor)	66	Each
33	33	In Ist Foor	70	Each
34	34	(vi) steel peg stay 300 mm long including fitting and fixing. (G.Floor)	66	Each
35	35	In ist Floor	70	Each
36	36	(vill) M.S. integrated grill as per approved design integrated . with steel window or ventilator, joints continuously welded with M.S. flats and bars. (In ground floor)	420	kg
37	37	In 1st floor .	420	kg
38	38	(a) Fixed type steel windows as per IS sizes with horizontal Glazing bars. (Ground Floor)	2.7	m²
39	39	In 1st Floor	2.7	m²
40	40	Supplying, fitting and fixing in position fibre glass panes of approved quality with resin, nail, clip etc. as per 1S:12866-1989. (In all floors for internal wall & upto 6 m height for external wall) (c) 2.0 mm thick (3.36 Kg/Sq.m) in G.F.	28	m²
41	41	in 1st F.	28	m²
42	42	Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.	375	m²
43	43	Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length in G.F.	48	Each
44	44	in 1st F.	48	Each
45	45	in 2nd F.	6	Each
46	46	Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100mm. X 58mm. X 1.90mm. in G.F.	42	Each
47	47	in 1st F.	42	Each
48	48	in 2nd F.	6	Each
49	49	Iron socket bolt of approved quality fitted and fixed complete. b (e) 300mm long x 10mm dia bolt. in G.F.	8	Each
50	50	in 1st F.	8	Each
51	51	in 2nd F.	2	Each
52	52	lron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long. in G.F.	8	Each
53	53	in 1st F.	8	Each
54	54	in 2nd F.	1	Each
55	55	Supplying, fitting and fixing hinge cleat in position excluding the cost hinge and other fiffitngs.b) with 75mm iron Butt-hinge. i) Sal: Siliguri.	34	Each
56	56	(A) iron door ring of approved Quality fitted and fixed with nut and washer complete. (ii) 75mm dia.	50	Each
57	57	Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204 / 74 fitted and fixed with cadmium plated screws: (viii) 225 mm long x 12 mm dia. bolt.	17	Each
58	58	Anodised aliminium D-type handle of approved quality Manufactured from extruded section conforming to 1.S. specification (1.S. 230/72) fitted and fixed complete:(a) With continuous plate base (Hexagonal / Round rod) (vi) 150 mm grip x 10 mm dia rod.	34	Each
59	59	(a) M.S.or W.1, Omamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.( G.F.) .	3.13	Qntl
60	60	1St F.	3	Qntl
61	61	Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to 1S:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materials (Spun Yarn, Valamoid / Bitumen / M-Seal etc) complete. A) UPVC Pipes: ii) 110 mm. Dia.	78	m
62	62	B) UPVC Fittings: a) Plain Tee (ii) 110 mm. Dia. .	12	Nos
63	63	d) Shoe (ii) 110 mm. Dia.	12	Nos
64	64	Supplying dividing strip fitted and fixed with cement mortar (1:3) in mosaic or patent stone floor, dado etc. complete as per direction of the Engineer-in-charge.(i) Glass - 3mm. thick (b) 25 mm. wide strip .	376	m
65	65	Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm MS. Flats as collapsible bracings properly riveted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. In ground floor.	5.04	m²
66	66	Plaster (to wall, floor, celling etc) with sand and cement mortar including rounding off or chamfering Corners as directed and raking out joints including throating, nosing and drip dourse, scffolding/staging where necessary (gorund floor) (excluding cost of chipping over concrete surface) (i) With 1:6 cement mortar (b) 20 mm thick plaster. in G.F.	206	m²
67	67	in 1st F. (inside)	206	m²
68	68	(i) With 1:6 cement mortar(c) 15 mm thick plaster. in G.F.	885	m²
69	69	in 1st F. (inside)	410	m²
70	70	in 1st F. (out side)	252	m²
71	71	in 2nd F. (inside)	51	m²
72	72	in 2nd F. (out side) .	51	m²
73	73	(ii) With 1:4 cement mortar (c) 10 mm thick plaster in G.F.	212	m²
74	74	in 1st F. (inside)	187	m²
75	75	in 1st F. (out side)	26	m²
76	76	Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)	1749.13	m²
77	77	(a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.in G.F.	46	m²
78	78	in 1st F.	46	m²
79	79	Painting with ready mixed red lead paint of approved make and brand: (a) One coat in G.F.	87	m²
80	80	in 1st F.	87	m²
81	81	(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber surface :With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) in G.F.	46	m²
82	82	in ist F.	46	m²
83	83	(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On plastered surface : With other than hi-gloss of approved quality - (iv) Two coats (with any shade except white) in G.F.	1303	m²
84	84	in ist F.	1183	m²
85	85	(b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) in GF.	87	m²
86	86	in 1st F.	87	m²
87	87	Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.	245	m³
88	88	Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. NOTE : Cement 0.152 cu.m. per 100 sq.m.	276	m²
89	89	Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Thermoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.Two Coats. In Ground floor	290	m²
90	90	in 1st F.	386	m²
91	91	in 2nd F.	52	m²
92	92	Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothing of surface. Two Coats in GF.	765	m²
93	93	in 1st F.	765	m²
94	94	in 2nd F	50	m²
95	95	Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. Two Coats in G.F.	290	m²
96	96	in 1st F.	386	m²
97	97	in 2nd F.	52	m²
98	98	Galvanized corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In Roof:- b) With 0.63 mm thick sheet	18	m²
99	99	Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e). (II) With Polymerised Adhesive [6 mm thick] & epoxy grouting materials for filling joints including spacer-2 mm [Applied directly over finished artificial stone floor/ mosaic etc.] (B) Light Colour, G.F.	210	m²
100	100	in 1st F.	210	m²
101	101	(a) 75 mm. thick brick work with 1st class bricks set in cement, sand mortar (1:4) in ground floor including H.B. netting in every alternate layers. in G.F.	46	m²
102	102	in 1st F.	46	m²
103	103	M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1957 & IS: 1161- 1958 connected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1956 & IS: 9595 using electrodes of approved make and brand conforming to 1S:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental charges such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular members as specified in relevant IS code in finished work. Payment for gusset, bracket, and cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part there of. i) For trusses spanning up to 12.00 m	0.1	MT
104	104	Supplying galvanized J or L hook-bolt with nut and with necessary limpet and bitumen washers, pulty etc. fitted and fixed complete. (Total length of bolt upto 225 mm) (b) 8 mm dia. bolt	25	Each
105	105	(a) Applying 2 coats of bonding agent with synthetic multi-functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification	215	m²
106	106	Supplying. Fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor. (b), Slab Thickness above 25 mm and upto 37.5mm	5.55	m²
107	107	Sanitary Plumbing: Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (i) 580 mm X 440 mm \|	6	Nos
108	108	Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary filtings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made separately.). (a) (ii) 15 mm dia. medium quality.	50	m
109	109	(b) (ti) 20 mm dia. medium quality	80	m
110	110	(c) (li) 25 mm dia. medium quality	80	m
111	111	(e) (ii) 40 mm dia. medium quality	40	m
112	112	Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing \|.S.]. marking with fittings (tested to 21 kg per sq. cm.).(v) 40mm	2	Nos
113	113	(vil) 25 mm	5	Nos
114	114	Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar).	56	Nos
115	115	Supplying, fitting and fixing in position G.I.pipes of TATA make for underground works with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbow, nipple, short piece etc. including cost of all materials, jointing materials, cutting pipes, making threads, cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.!. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made seperately.) ) (v) 40mm dia. medium quality	50	m
116	116	Supplying, fitting and fixing 10 litre P.V.C. low- down cistern conforming to \|.S. specification with PV.C. fittings complete,C.l. brackets including two coats of painting to bracket etc.	7	Nos
117	117	Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden biocks, CP. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size	8	Nos
118	118	Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iv) 750 mm long	20	nos
119	119	Supplying, fitting & fixing Cast iron soil pipe only conforming to \|S. 3989 / 1970 and LS. 4729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials, payment for specials & Painting will however be paid separately). (a) With valamoid joints including sealing with sand cement mortar (4:1) upto quarter depth (ii) 100 mm dia. (internal)	20	m
120	120	Supplying, fitting & fixing H.C.I. bend with door conforming to 1.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid separately). (a) With valamoid joints including sealing the top with cement mortar (4:1) {ii) 100 mm dia.	10	Each
121	121	Supplying, fitting & fixing H.C.1. bend without door conforming to \|.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid separately). (a) With valamoid joints including sealing the top with cement mortar (4:1) (ii) 100 mm dia.	6	Each
122	122	Supplying, fitting and fixing cast iron 'P’ or 'S' trap conforming to \|.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid separately). (A) 'P' Trap (iii) 100 mm	5	nos
123	123	Supplying, fitting and fixing with cement jointing (3:1) salt) glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soll] both mixed or unmixed and refilling (but excluding concreting at bottom and sides). (iv) 100 mm	7	m
124	124	Supplying, fitting & fixing Aluminium domical grating. (iii) 100 mm	46	Each
125	125	Supplying.fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iv) 1050 mm long	15	Each
126	126	Supplying, fitting and fixing Anglo-indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. (a) With ‘P' trap (with vent)	1	Each
127	127	Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. With Pakur variety.	4	Each
128	128	Construction of septic tank of different capacities as per approved drawing with ‘st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 400mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (1:6) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 - 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessary specials, fittings, SW. tees, C.l. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing (v) For 100 users A) With Pakur variety.	1	Each
129	129	Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the RCC. cover slab including filling bottom 1.00metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 400 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making necessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the excess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (6:1) and 1.00m inside	1	Nos
130	130	Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid separately). 600 mm X 100 mm (a) Salt glazed stone ware	10	Nos
131	131	Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).(viii) 20 mm	4	Nos
132	132	(ix) 15 mm	2	Nos
133	133	Supplying, fitting and fixing of Fire clay Kitchen Sink with overflow conforming to IS: 771 with waste fittings and C.I. Brackets. (White Colour) (i) 750 mm X 450 m X 250 mm	1	Nos
134	134	Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) – Multilayer (d) 2000 litre capacity	3	Nos
135	135	Labour for hoisting plastic water storage tank. (ii) Above 1500 litre upto 5000 litre capacity. (a) Upto 1st story from G.L.	3	Nos
136	136	Supplying, fitting and fixing shower of approved brand and make.(a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Something Special of ESSCO or similar).	7	Nos
137	137	Supplying. fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per 1.S.1. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm	7	Nos
138	138	Supplying, fitting and fixing liquid soap container. (a) Chromium plated.	7	Nos
139	139	Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type) (ii) 560 mm dia.	8	Each
140	140	Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as {to impart monolithic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy !S: 4020 door (esting performance criteria. 65mm x 90mm	84.15	m²
141	141	Supplying, fitting & fixing fibre reinforced polymer {FRP) Composite door shelters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolithic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor. (i) 32 mm thick	27	m²
142	142	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with coloring oxide if required to match the color of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor, With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using while cement slurry @ 0.20kg/Sq.in. (a) Area of each tile upto 0.09 Sq.m (i) Colored decorative. in ground floor.	20	m²
143	143	in 1st floor	25	m²
144	144	(B) Wall with Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement: slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Colored decorative. In ground floor	72	m²
145	145	In 1st Floor	72	Nos
146	146	Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete (1:2:4) as per direction. (Cost of concrete will be paid separately)(c) 40mm X 6mm, 125mm Length	102	Nos
147	147	Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (ii) 50mm. X 40mm. X 2.5mm.	102	Nos
148	148	Iron socket bolt of approved quality fitled and fixed complete. (c) 150mm long x 10mm dia bolt.	17	Nos
149	149	Iron hasp bolt of approved quality fitted and fixed complete (oxidized) with 16mm dia rod with center bolt and round fitting.	17	Each
150	150	Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(i) 635 mm X 395 mm X 420 mm	5	Each
151	151	BOUNDARY WALL : Earth work in excavation of foundation trenches etc. in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom properly including bailing /pumping out water from the bed, as required & directed by the Engineer-in-charge, complete. With depth of excavation not exceeding 1.50 m.	73.59	m³
152	152	Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand, as per direction of Engineer-in-Charge.	73.36	m²
153	153	Cement Concrete with graded stone ballast (40 mm size) excluding shuttering etc. as per direction of Engineer-in-charge, complete. In 6:3:1 proportion.	4.03	m³
154	154	Ordinary Cement Concrete ( Mix 3:1.5:1) with graded stone Chips (20 mm size) excluding shuttering & reinforcement, if any, in Ground floor as per IS 456-2000. Using Stone material of Rajmahal variety.	25.75	m³
155	155	Brick work with 1st class bricks in cement mortar (6:1) in Foundation and Plinth\n	5.45	m³
156	156	Hire and Labour Charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hard wood planks of approved thickness with required bracings for concrete slabs, beams, columns, lintels, curved or straight including fitting, fixing and striking out after completion of works. B ) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-Charge	82.58	m²
157	157	B ) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-in-Charge	146.18	m²
158	158	Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. Tor / Mild Steel.	2.224	MT
159	159	Earth work in in filling in foundation trenches or plinth with good earth in layers not exceeding 150 mm including watering and ramming etc layer by layer complete	14.72	m³
160	160	125 mm thick Brick work with 1st class brick in Cement Mortar (4:1).	241.56	m²
161	161	25 mm thick damp proof course with cement concrete (1:1.5:3) (with graded stone aggregate10 mm nominal size) and painting the top surface with a coat of Bitumen using 1.7 Kg per Sqm including heating the bitumen and cost and cariage of all materials complete.\n	18.16	m²
162	162	M.S. or W. I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows,railing etc fitted & fixed with necessary screws and lugs.	232.875	kg
163	163	Plaster ( to wall, floor,ceiling etc. ) with sand cement mortar including Rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface, including threading nosing and drip Course where necessary.	631.53	m²
164	164	Priming one coat on steel or other metal surface with Synthetic Enamel / oil bound primer of approved quality including smoothening surface by sand papering etc.	10.35	m²
165	165	Painting with best quality Synthetic Enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of tc on the surface if necessary/Two Coats	10.35	m²
166	166	Applying decorative cement based paint of approved quality including cleaning the surface including scraping the same thorougly ( plastered or concrete surface ) as per manufacturer's specification.	631.53	m²
167	167	Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work). A ) With carried earth arranged by the contractor within a radius of 3 km. including cost of carried earth.	23.79	m³
168	168	ELECTRICAL:: A. S/F polythene pipe complete with fittings as necessary under ceiling/ beam, bound with 22 SWG GI. Binding wire incl S/Drawing 1x 18 SWG GI. Wire as fish wire inside the pipes and fittings and providing 50mm dia dise of MS sheet(20SWG) having colour paint at one face fastened at the load point end of the poly pipe with fish wire (synchronizing with roof / beam casting work of building construction) i) 19 mm dia , (a) Light Circuit , power circuit	313	Mtr.
169	169	Cutting channel of size (40mmx 40mm) on masonary wall by Electric operated cutting machine incl. Supplying & fixing heavy gauge 19mm, 3mm thick polythene pipe by means of anchoring chemical (Hilti/ Sika) and GI 'U' hooks of 8 SWG incl. Supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and trackles. i) 19 mm dia 3mm thick poly pipe	120	Mtr.
170	170	Supplying and Drawing 1.1 KV grade sin gle core stranded 'FR' PVC insulated copper wire (Brand approved by EIC) of the following sizes in the prepaid polythene pipe and by the prepaid GI fish wire and making necy. Connection as required. 3x1.5sqmm ,	240	Nos.
171	171	b) 2x2.5+1x1.5sqmm	120	Nos.
172	172	c) 2x4.0+1x1.5sqmm,	35	Nos.
173	173	Distribution Wiring in 22/03 (1.5 sqmm)single KV grade 1.5 sqmm. Single core stranded ' FR' PVC insulated copper wire (Brand approved by EIC) in19mm size mm bore ,3mm thick polythene pipe( for horizontal & vertical run in wall and celling portion through prelaid polythene pipe) complete with all accessories embedded in wall to light/fan/ call bell points with Modular type switch Brand approved by EIC) incl. S & F earth continuty wire , fixed on Modular GL switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish. i)Average run 10.0 mtr.	180	Nos.
174	174	Distribution Wiring in 2x22/03 (1.5 sqmm)single KV grade 1.5 sqmm. Single core stranded ' FR' PVC insulated copper wire (Brand approved by EIC) in19mm size mm bore ,3mm thick polythene pipe complete with all accessories embedded in wall to light/fan/call bell points withModular type switchBrand approved by EIC) incl. S & F earth continuty wire , fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish.(i) on Board	20	Nos.
175	175	Supply & Fixing 240 V, 16 A, 3 Pin Modular type socket (Brand approved by EIC) with 16A modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S & F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Page E18 item no. 9b)	6	Nos.
176	176	Earthing with 50mm dia Gi pipe 3.64mtr 3.04 mtr long …………..duly rammed . (Tata M.Q.) (page G1 Item No. 02)	2	set
177	177	Supplying/Fixing angular batten holder[Anchor] on 75 mm dia PVC round block on wall.[page D13 Item No. 22]	60	set
178	178	Fixing only single /twine fluorescent light fitting complete with all accessories directly on wall/ ceiling by screws etc.	54	Nos.
179	179	Fixing only ceiling fan with ……….. copper wire. (page c3 item no.- 21a)	46	Nos.
180	180	S/f socket type fan regulator (step type ) (brand app. By the E.I.C) on existing switch board by screw .. connection etc. ( page-E6 item no. 18(b)	46	Nos.
181	181	Fixing exhaust fan after ……… finish 25cm (pageC4 item no. -28)	16	Nos.
182	182	A. S/F 240V 30/32 A DP sheet steel main switch ………(page D1 item no. -1a)	4	Nos.
183	183	B. S/F 415V 60/63 A TPN sheet steel main switch or flat iron frame on wall, Havells make.(page D1 item no. -1a)	1	Nos.
184	184	C. S/F change over switch with sheet steel enclose on angle iron frame on wall with nuts & bolts (page D1 item no. -02b) Havells make 415V FP 63A	1	Nos.
185	185	S/f sheet metal iron clad busher chambers on angle iron frame on wall …..earthing attachment. 4 bars 415 V 63A (page D12 item No. -19a)	1	Nos.
186	186	Supply 4’0” long fluoresment tube light LED philips make . Commercial Batten Type BN021LED255.	54	Nos.
187	187	Supply of 1200 mm sweep ceiling fan of app. Make such as Orient , Usha,Khaitan,(L.M.R)	46	Nos.
188	188	Supply of 225mm sweep exhaust fan app. Make (L.M.R)	12	Nos.
189	189	Supply 20 watt LED lamp of app make such as Philips, Havells, Bajaj etc.	60	Nos.
190	190	S/f outside lamp LED Philips make Green Line type BRP-409LED CW 036	4	Nos.
191	191	A. supply of 4 core 25.0 sqmm Al. Ar. Cable app. Make &brand .(page k10)	50	Mtr.
192	192	B) Supply of 2 core 4.0sqmm. Al. Ar. Cable app. Make & brand ( page K 10)	60	Mtr.
193	193	C. Laying of cable 4 core 25.0sqmm. Al. Ar. Cable incl. MS saddle with easrthing. (page f1 item No. 2b)	45	Mtr.
194	194	D) Laying of cable 2 core 4.0sqmm. Al. Ar. Cable incl. MS saddle with easrthing. (page f1 item No. 2b)	50	Mtr.
195	195	Supply and installation of Sub-merssible pump (KSB / Crompton or of any other approved make and brand), installation, lowering, connecting with the controll panel with necessary cables, testing etc complete as per direction of the Engineer-in-charge including cost of all materials, equipments, labour and all other incidental charges, complete in all respect. 2 H.P. Capacity (Single phase ).	1	Nos.
196	196	Febrication & inter connection of panel board accessories	1	item
197	197	Sub Total	1	Sum
198	198	GST @ 12 %	12	percentage
199	199	Cost + GST	1	total
200	200	Cess @ 1 %	1	percentage

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

West Bengal Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Girls Hostel At Malda Womens College Under English Bazar Dev . Block , Malda, English Bazar, Malda-West Bengal

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Girls Hostel At Malda Womens College Under English Bazar Dev . Block , Malda, English Bazar, Malda-West Bengal

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us