Construction Of Academic Block And Hostel At Kasturba Gandhi Balika Vidyalay Mahuwa , Distt . -Banda, Mahuwa, Distt.- Banda-Uttar Pradesh

TDR : 24518043

Tender Notice
BOQ

Expired

Mahuwa, Distt.- Banda , Uttar Pradesh

Tender Brief : Construction Of Academic Block And Hostel At Kasturba Gandhi Balika Vidyalay Mahuwa , Distt . -Banda

Document Fees
₹ 5310 /-

EMD
₹ 460000.0 /-

Tender Value
₹ 2.30 Crore /-

Submission Date
25-06-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Construction of Academic Block and Hostel at Kasturba Gandhi Balika Vidyalay Mahuwa, District- Banda.
1	1	Earth work in exacavation in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m and lead upto 30 mt. & including filling, watering and ramming of excavated earth into the trenches or into the space between building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the E/I upto a distance of 30 mt. from the foundation trenches.	BI01010001010000000000000515BI0100001113	1051.72	CUM
2	2	Filling of earth in plinth in 20cm layer including leveling, dressing and watering and also including of supply of earth including carted loading & unloading as per direction of Engineer incharge..	BI01010001010000000000000515BI0100001114	566.52	CUM
3	3	Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.	BI01010001010000000000000515BI0100001115	255.14	CUM
4	4	Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.	BI01010001010000000000000515BI0100001116	213.53	CUM
5	5	Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of building expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)	BI01010001010000000000000515BI0100001117	1538.06	SQM
6	6	R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-200.	BI01010001010000000000000515BI0100001118	91.46	CUM
7	7	R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Slab excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.	BI01010001010000000000000515BI0100001119	290.74	CUM
8	8	R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Lighter Beam excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.	BI01010001010000000000000515BI0100001120	32.28	CUM
9	9	R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Raft Foundation excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.	BI01010001010000000000000515BI0100001121	8.72	CUM
10	10	R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in Column excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour, tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20.	BI01010001010000000000000515BI0100001122	12.26	CUM
11	11	M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.	BI01010001010000000000000515BI0100001123	523.28	CUM
12	12	First class brick M-150 work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms.	BI01010001010000000000000515BI0100001125	606.64	CUM
13	13	First class brick M-150 work in 1:4 cement and coarse sand of 2.25 fineness modulus) mortar in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in 1/2 brick wall.	BI01010001010000000000000515BI0100001126	130.46	CUM
14	14	P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.	BI01010001010000000000000515BI0100001118	237.22	QTL
15	15	12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth. (1) 1 cement : 6 CORASE sand	BI01010001010000000000000515BI0100001119	5032.06	SQM
16	16	15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 CORASE sand	BI01010001010000000000000515BI0100001120	2929.9	SQM
17	17	15 mm thik plinth cement plaster 1:4(1 cement: 4 coarse sand)including supply of all materials t&p etc proper completion of work.	BI01010001010000000000000515BI0100001121	258.92	SQM
18	18	Making grooves 10 to 12 mm wide x 8 mm deep in plaster of the walls or in ceiling vertically or horizontally as required.	BI01010001010000000000000515BI0100001122	1588.56	RM
19	19	Making dreep course in sunsade or facia	BI01010001010000000000000515BI0100001123	150	RM
20	20	Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement without base concrete including fixing of glass strip (excluding cost of glass strip).\n(40 mm thick floor).	BI01010001010000000000000515BI0100001125	1125.43	SQM
21	21	20 mm thick cement plaster in dado or skirting in 1:2 consisting of one part of cement and 2 parts of approved coarse sand laid in panels, finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 including supply of all materials labour T & P etc. required for proper completion of the work.	BI01010001010000000000000515BI0100001126	331.47	SQM
22	22	Supply of glass strips for flooring.35mm wide & 3.8 to 4.7 mm thick.	BI01010001010000000000000515BI0100001127	3939	RM
23	23	Supply and fixing 6 mm thick China glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 300x300mm).	BI01010001010000000000000515BI0100001128	536.69	SQM
24	24	Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).	BI01010001010000000000000515BI0100001118	210.51	SQM
25	25	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :\n32 mm thick including ISI marked Stainless Steel butt hinges with necessary screws	BI01010001010000000000000515BI0100001119	154	SQM
26	26	Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).	BI01010001010000000000000515BI0100001120	80.22	SQM
27	27	Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required form including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Providing & fixing of hold fast or angle iron for chaukhats of doors and windows.	BI01010001010000000000000515BI0100001121	4843.05	KG
28	28	Fabrication of door / windows grill.	BI01010001010000000000000515BI0100001122	4681.09	KG
29	29	Z-Section steel windows with Openable panels, excluding Glass panes.	BI01010001010000000000000515BI0100001123	4173.6	KG
30	30	Fixing of Door, windows / ventilators chaukhats in position.	BI01010001010000000000000515BI0100001125	340.04	SQM
31	31	Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials.	BI01010001010000000000000515BI0100001126	7304.78	SQM
32	32	Finishing walls (Two coat) with water-proofing on cement paint of approved make and quality on new work with two coat to give an even shade. Including suplly of all material labour and T&P etc required for proper completion of the work.	BI01010001010000000000000515BI0100001118	2929.9	SQM
33	33	Providing and fixing ISI marked oxidised S.S. sliding door bolts with nuts and screws etc. complete :\n250mm x 16mm	BI01010001010000000000000515BI0100001119	115	NOS
34	34	Providing and fixing ISI marked oxidised S.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :\n 250 mm x 10mm	BI01010001010000000000000515BI0100001120	115	NOS
35	35	Same as above item but for size 200 mm x 10mm	BI01010001010000000000000515BI0100001121	115	NOS
36	36	Providing and fixing ISI marked oxidised S.S. handles conforming to IS:4992 with necessary screws etc. complete : \n125 mm	BI01010001010000000000000515BI0100001122	230	NOS
37	37	Providing and laying \"Brick Coba\" 100 mm thick laid M-150 class brick ballast coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement morter 1:4 cement and coarse sand mixed with water proofing compound spreeding cement slurry mixed with aerelic cement concrete water proofing compound in 1:4 cement and coarse sand mortar finished smooth & Top mashed false square 30 cmx 30 cm and side wall parapet shall be monolythic plaster wall upto 30 cm higher & junction and corners shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @2% by weight and including S/o all material, labour T & P etc complete for proper completion of work.	BI01010001010000000000000515BI0100001123	1565.68	SQM
38	38	Painting two coat over priming coat (but including cost of priming coat) on steel and wooden surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3 apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.	BI01010001010000000000000515BI0100001125	1370.77	SQM
39	39	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (a) 4 mm thick.	BI01010001010000000000000515BI0100001126	238.59	SQM
40	40	Providing and fixing in position collepsible steel shutters with verticals chanels 20102mm and braced with flate iron digonals 205 mm. size with top and bottom rails of T iron 4040*6 mm. with 38 m dia steel pulleys with bolts. Nut locking arregement stopers handle of approved lead point.	BI01010001010000000000000515BI0100001127	18.02	SQM
41	41	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment	BI01010001010000000000000515BI0100001128	16.2	SQM
42	42	Providing and laying of light cinder filling under floor of toilets ans other sunken roofs.	BI01010001010000000000000515BI0100001120	16.87	CUM
43	43	Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.	BI01010001010000000000000515BI0100001121	53.21	SQM
44	44	Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required.\nOrissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.	BI01010001010000000000000515BI0100001122	29	NOS.
45	45	Same as above but for Eropion type W.C. pan with back plastic seat and lid Make, Cera, Hidustan	BI01010001010000000000000515BI0100001123	15	NOS.
46	46	Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including \nFlat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.	BI01010001010000000000000515BI0100001125	40	NOS.
47	47	Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.\n40mm dia	BI01010001010000000000000515BI0100001126	40	NOS.
48	48	Provding and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required\nKitchen sink with drain board of size 510x1040x200mm	BI01010001010000000000000515BI0100001118	3	NOS.
49	49	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.	BI01010001010000000000000515BI0100001119	25	NOS.
50	50	Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms.	BI01010001010000000000000515BI0100001120	52	Each
51	51	Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge. 15 mm nominal bore	BI01010001010000000000000515BI0100001121	16	Each
52	52	Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms	BI01010001010000000000000515BI0100001122	28	Each
53	53	Providing 15 mm dia. inlet C.P. brass shower rose with 15 or 20mm inlet. 100mm Dia	BI01010001010000000000000515BI0100001123	16	Each
54	54	Providing & fixing white vitreous china urinal division plate as required.	BI01010001010000000000000515BI0100001125	3	Nos
55	55	Providing & fixing soil, waste and vent pipes.\n110mm dia centrifugally SWR pipe.	BI01010001010000000000000515BI0100001126	360	Rm.
56	56	Same as above item but for 75mm dia centrifugally SWR pipe.	BI01010001010000000000000515BI0100001127	140	Rm.
57	57	Providing & fixing Upvc SWR Nhani trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors.\n110mm inlet & 75mm outlet.	BI01010001010000000000000515BI0100001128	40	No.
58	58	Providing and fixing plain SWR bend.\n110mm	BI01010001010000000000000515BI0100001125	20	Nos.
59	59	Same as above item 75mm	BI01010001010000000000000515BI0100001126	25	Nos.
60	60	Providing and fixing centrifugaly UPVC SWR single equal plain junction of required degree.\nSize 110x110x110mm	BI01010001010000000000000515BI0100001127	18	Nos.
61	61	Same as above item but for size 75x75x75mm	BI01010001010000000000000515BI0100001128	20	Nos.
62	62	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.\n 110mm diameter	BI01010001010000000000000515BI0100001120	295	Mtr
63	63	Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.\n(internal work) Exposed on wall\n25mm dia nominal bore (medium duty)	BI01010001010000000000000515BI0100001121	125	Rm.
64	64	Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall.\n 15mm dia nominal bore	BI01010001010000000000000515BI0100001122	200	Rm.
65	65	Same as above item but for 20mm dia nominal bore	BI01010001010000000000000515BI0100001123	200	Rm.
66	66	Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.\n15mm nominal bore	BI01010001010000000000000515BI0100001125	98	Nos.
67	67	Providing & fixing CP brass short body of approved quality conforming to IS 8931 15mm nominal bore	BI01010001010000000000000515BI0100001126	26	Nos.
68	68	Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.\n 15mm nominal bore	BI01010001010000000000000515BI0100001118	27	Nos.
69	69	Providing and fixing gun metal gate valve with wheel of approved quality.\n 20 mm dia nominal bore	BI01010001010000000000000515BI0100001119	10	Each
70	70	Same as above item but for 25mm dia nominal bore	BI01010001010000000000000515BI0100001120	15	Each
71	71	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.\n25 mm nominal bore	BI01010001010000000000000515BI0100001121	9	Nos.
72	72	Providing and fixing c.p. brass angle valve for basin mixer and geyeser points of approved quality confirm IS 8931.\n15 mm nominal bore	BI01010001010000000000000515BI0100001122	38	Each
73	73	Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.\nCircular Tank	BI01010001010000000000000515BI0100001123	10000	Per Ltrs
74	74	Supply and fixing of UPVC SWR pipe type -B confirming to IS-13592 including jointing the pipes with rubber ring lubricant and UpVC SWR cuplar confirming to IS-14735 also including excavation of trences as before but excluding supply and cost of other fitting such as elbow bead, tee and Y-tee including supply of all material labour and t&p required for proper completion of the work.\n160mm diameter	BI01010001010000000000000515BI0100001125	235	M
75	75	Laying cement concrete 1:2:4(1 cement :2coarse sand :4graded stone aggregate) 20mm nominal size in haunching SWR pipe including necessary form work and curring complete \n110mm diameter S.W.R. Pipe	BI01010001010000000000000515BI0100001126	13.66	M
76	76	Same as above item but for 160mm diameter S.W.R. Pipe	BI01010001010000000000000515BI0100001127	15.2	M
77	77	Providing and fixing square mouth UPVC S.W.R. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design. a) 150 x 110 mm. size P type\nWith Sewer bricks conforming to IS : 4885	BI01010001010000000000000515BI0100001128	26	Nos
78	78	Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80X50cms including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg).\nWith FPS bricks of class designation 75\n For Sewer Line	BI01010001010000000000000515BI0100001125	17	Each
79	79	Extra for depth of man hole size 90x80 cm	BI01010001010000000000000515BI0100001126	5	metre
80	80	Wiring points for light with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable heavy PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box, piano type & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet ect complete in all respect as directed including matching colour wash.	BI01010001010000000000000515BI0100001127	338	Each
81	81	Same as above item but for fan and light duty exhaust fan.	BI01010001010000000000000515BI0100001128	151	Each
82	82	Same as above item but for 5 amp plug point with piano type switch and socket etc.	BI01010001010000000000000515BI0100001120	137	Each
83	83	Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly laid in slab alongwith reinforcemet before concreting and partly concealed in wall one no 14 SWG copper earth continuity wire etc, complete in all respects including matchning colour wash.	BI01010001010000000000000515BI0100001121	240	Rmt
84	84	Supply and wiring of submiain with two number 4 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wiere including matching colour wash etc. complete in all respect.	BI01010001010000000000000515BI0100001122	330	Metre
85	85	Supply and wiring of submiain with 4 number 10 sq.mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 32mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with two number 10 SWG copper earth continuity wiere including matching colour wash etc. complete in all respect.	BI01010001010000000000000515BI0100001123	170	Metre
86	86	Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects.	BI01010001010000000000000515BI0100001125	127	Each
87	87	Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects.	BI01010001010000000000000515BI0100001126	33	Each
88	88	Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0mm thick ISI Marked G.P. sheet spot weeldeed Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screewed fitted with 300mm round zink coted M.S Bar X 12mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.	BI01010001010000000000000515BI0100001118	117	Each
89	89	Supply fixing of electronic fan regulator(Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work.	BI01010001010000000000000515BI0100001119	117	Each
90	90	Supply and Ceiling fan with fan motor of AC permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system\nBEE 4 star rated-1200 mm sweep	BI01010001010000000000000515BI0100001120	117	Each
91	91	Supply & fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA)	BI01010001010000000000000515BI0100001121	243	Each
92	92	Supply & fixing of Pendent sleek mounting having 1'x4' Size 36 to 46 Watt seamlessly intergrateds LED luminier with acrylic sheet diffuser complete in all respect. (CAT: AAA)	BI01010001010000000000000515BI0100001122	19	Each
93	93	Supply & fixing of recess/ surface/ pendant mounting round 6Watt LED Down lighter having powder coated die cast aluminium housing with heat sink diffuser/ Reflector and driver set complete in all respect. CAT AAA	BI01010001010000000000000515BI0100001123	8	Each
94	94	S/F of single light wall bracket on matching M.D.F.E.G..board base etc. complete in all respects.	BI01010001010000000000000515BI0100001125	65	Each
95	95	Supply & fixing of factory wired integral LED flood light luminaries with die cast aluminium housing built with driver set suitable for 40 to 50 watt confirming to IP 65 protection complete in all respect. CATT AAA	BI01010001010000000000000515BI0100001126	12	Each
96	96	Supply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects.\n4 Way TPN	BI01010001010000000000000515BI0100001127	11	Each
97	97	Same as above item but for 6 Way TPN	BI01010001010000000000000515BI0100001125	11	Each
98	98	Supply and fixing of 6Amp to 32 Amp(10 KA) MCB in existing MCB, DB complete with connections as required.	BI01010001010000000000000515BI0100001126	73	Each
99	99	Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250V flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work.	BI01010001010000000000000515BI0100001127	42	Each
100	100	Supply and fixing Single Pole MCBS Blanking Plate complete in all respects.	BI01010001010000000000000515BI0100001128	50	Each
101	101	Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.	BI01010001010000000000000515BI0100001120	2	Each
102	102	Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.	BI01010001010000000000000515BI0100001121	2	Nos.
103	103	Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.	BI01010001010000000000000515BI0100001122	120	Metre
104	104	Supply and fixing of one number 8 SWG G.I wire in 15mm dia. G.I pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.	BI01010001010000000000000515BI0100001123	160	Metre
105	105	Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.\n25 sqmm 4 core	BI01010001010000000000000515BI0100001125	110	Rmt.
106	106	Same as above item but for 16 sqmm 4 core	BI01010001010000000000000515BI0100001126	80	Rmt.
107	107	Same as above item but for 10 sqmm 4 core	BI01010001010000000000000515BI0100001118	80	Rmt.
108	108	Same as above item but for 6 sqmm 2 core	BI01010001010000000000000515BI0100001119	100	Rmt.
109	109	Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire\n25 sqmm 4 core	BI01010001010000000000000515BI0100001120	18	Each
110	110	Same as above item but for 16 sqmm 4 core	BI01010001010000000000000515BI0100001121	18	Each
111	111	Same as above item but for 10 sqmm 4 core	BI01010001010000000000000515BI0100001122	22	Each
112	112	Same as above item but for 10 sqmm 2 core	BI01010001010000000000000515BI0100001123	40	Each
113	113	Same as above item but for 6 sqmm 2 core	BI01010001010000000000000515BI0100001125	20	Each
114	114	Supply and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.\n95 Sq.mm	BI01010001010000000000000515BI0100001126	4	Each
115	115	Same as above item but for 25 Sq.mm	BI01010001010000000000000515BI0100001119	21	Each
116	116	Same as above item but for 16 Sq.mm	BI01010001010000000000000515BI0100001120	12	Each
117	117	Same as above item but for 10 Sq.mm	BI01010001010000000000000515BI0100001121	40	Each
118	118	Same as above item but for 6 Sq.mm	BI01010001010000000000000515BI0100001122	40	Each
119	119	S & F of surface/flush mounting 4 ways V TPN distribution board with additional door cithout MCB complete in all respect, as directed at site by Engineer in charge.	BI01010001010000000000000515BI0100001123	2	Each
120	120	S & F of 63 Amp TP MCB (10KA) C Curve.	BI01010001010000000000000515BI0100001125	2	Each
121	121	S & F of 40 Amp TP MCB (10KA) C Curve.	BI01010001010000000000000515BI0100001126	4	Each
122	122	Supply and erection of AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required \n300mm sweep.	BI01010001010000000000000515BI0100001127	34	Each
123	123	Supply and fixing exaust louvers 12 inch dia. complete as required	BI01010001010000000000000515BI0100001125	34	Each

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Uttar Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Academic Block And Hostel At Kasturba Gandhi Balika Vidyalay Mahuwa , Distt . -Banda, Mahuwa, Distt.- Banda-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Academic Block And Hostel At Kasturba Gandhi Balika Vidyalay Mahuwa , Distt . -Banda, Mahuwa, Distt.- Banda-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us