Military Engineer Services-MES has published Special Repaires To Buildig No Np-26 ( Appt House ) At Mil Stn Jamnagar. Submission Date for this Tender is 29-06-2020. Building Repair Tenders in ARMY AREA JAMNAGAR Gujarat. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 22-Jun-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-06-2020 |
SPECIAL REPAIRES TO BUILDIG No NP-26 (APPT HOUSE) AT MIL STN JAMNAGAR | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Dismantling timber scantling 40 sqcm and over in section in any position in framed work. | 3 | Cum | |
2 | 2 | S & F Structural steel/ tubular /box section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 .St.240 conforming to Fe 410-0 or Fe 310-0. | 2500 | KG | |
3 | 3 | S&F Mild steel screw bolts (machine made)with hexagonal or square heads at one end and screwed the other,or screwed both ends ,each screwed end to be fitted with washers diameter of neck 11 to 15mm and one hexagonal but length of bolt exc 15 cm and n exc 22.5cm long | 27 | KG | |
4 | 4 | Cutting holes into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete exc 150sqcm but n exc 400 sqcm | 980 | Per cm of depth | |
5 | 5 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-Charge. | 385 | Sqm | |
6 | 6 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of tile profile (as per sample shown by Engr-in-charge)0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | 370 | Sqm | |
7 | 7 | S&F of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick , cut is reqd shapes and size as in factory ridges,valleys,facia boards,edges etc complete of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. | 15 | Sqm | |
8 | 8 | Dismantling of wall and ceiling board (fibre, pulp, insulation) or insulation board/slabs/blankets any thickness incl cover fillets complete all as specified and directed by Engineer-in-Charge.. | 220 | Sqm | |
9 | 9 | S&F 12.5mm thick moisture resistant gypsum boards as in ceiling plain/perforated found sound insulation incl intermediate , perimetr channel ceiling channel ,along nuts and bolts connecting plates gypsum boards ,dry wall screws soffits cleats ,ceiling section,rowel plugs fixtures and screws complete all as spfd and as shown in sketch and applying two coats of emulsion paint over a coat primer on exposed surfaces.Design of ceiling board as app by Engr-in-Charge.(Make: Gypsum board/Arm strong/Ramco/Bison) | 220 | Sqm | |
10 | 10 | S & F in repair PVC solid kitchen cabinet including stainless steel plate rack, bottle rack, etc, sliding/side hung type doors,drawers of any type and size including chowkhat/frame (depth up to 75 cm) and fancy handle all stainless steel fittings & fixturesof approved make complet all as specified and directed by Engr in Charge.(measurement will be front elevation area)(Make: Sintex/Rajshri Plastiwood/Accura polytech) | 7 | Sqm | |
11 | 11 | Taking down chowkat or frames n.exc 1.5 Sqm each. but with shutters (without taking off shutters from the frames) | 6 | Each | |
12 | 12 | Taking down chowkat or frame exc 1.5 Sqm and n.exc 4.00 Sqm each but with shutters (without taking off shutters from the frames) | 5 | Each | |
13 | 13 | S&F Aluminium anodised powder coated (powder coating not less than 50 micron) frame for doors, window & ventilators with shutter ,side hung type with out sash bars, including frames necessary joining cleats, glazing clips, anodised aluminium snap beading, screws, bronze anodised alumuminium fittigs such as stays, hinges type B-21 100 mm long suitable handle and locking system etc. glazing cleats, neoprene rubber beading fixed in frames (Neoprene rubber beading/Glazing will be measured and paid separately) complete all as directed by Engr in charge.(Jindal/Hindalco/Indal) | 100 | Kg | |
14 | 14 | S&F Anodised Alum powder coated of any colour deco grill of 6 mm dia (powder coating not less than 50 micron) all as specified and directed at site.(Jindal/Hindalco/Indal) | 12 | Sqm | |
15 | 15 | S&F Neoprene rubber beading/packing complte all as directed by Engineer in Charge. | 50 | Rm | |
16 | 16 | S&F 4.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane(Make: Kohinoor/Modi guard/Saint Gobin) | 10 | Sqm | |
17 | 17 | S&F Stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (SS grade 304 ) complete all as specifiedand directed. | 2 | SQM | |
18 | 18 | S & F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs ,washers and wasters including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mmx420mm bowl size 410mmx330mmx160mm ). | 1 | Each | |
19 | 19 | Complete Removal of existing treatment on wall and applying two coats of oil bond distemper and 3 mm putty all as directed.(Make: Berger/Nerloac/Asian paints) | 410 | Sqm | |
20 | 20 | Complete removal of existing treatment on wall surfaces and applying two coats of extrrior emulsion paint white or tinted over and including one coat alkalli resistance primer complete all as specified and directed by Engineer-in-Charge. | 220 | Sqm | |
21 | 21 | M&L for preparation of old or previously treated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. | 50 | Sqm | |
22 | 22 | M&L preparation of newly steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide. | 60 | Sqm | |
23 | 23 | Demolition of brick work orstone/boulder masonry built in cement mortor or cement lime mortor incl all quoins,arches,pillars etc all as specified and directed | 2 | Cum | |
24 | 24 | M&L Pre cast cement concrete block type C1in 1:3:6 Using 20 mm graded stone aggregate exc 10 CM in widdth and setting in CM 1;6 all as specified and directed. | 2 | Cum | |
25 | 25 | M&L for rendering 20 mm thick in CM 1:4 on the external surfaces of brick work/Strone or concrete surface finishing fair and @ 3% of water proofing copound, even without using extra cement all as specified and directed. | 22 | Sqm | |
26 | 26 | Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making dood the disturbed rurfaces of walls floors etc all as directed. | 113 | Point | |
27 | 27 | M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall(Brick/stone masonary), ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with modular metal flush boxes & cover plate with frame of white colour of suitable size as required at site; including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly complete including replastering and making good the surface of wall and painting with existing colour all as specified and directed at site for the following : | |||
28 | 27.01 | One light/ Fan point controlled by one way switch. | 66 | Point | |
29 | 27.02 | One Bell point controlled by one switch bell push | 2 | Point | |
30 | 27.03 | One 5 Amps socket on same board with other switches. | 10 | Point | |
31 | 27.04 | One 5 Amps socket on independent board. | 23 | Point | |
32 | 28 | All as per item No-27 here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed. | 12 | Point | |
33 | 29 | S&F modular switch piano flush type single pole one way 6/10 Amps,1 module | 97 | Each | |
34 | 30 | S&F moduler socket 6/10 Amps -2/3 pin combined 2 module, | 33 | Each | |
35 | 31 | S&F modular switch piano flush type single pole one way 16/20 Amps,1 module | 12 | Each | |
36 | 32 | S&F Modular socket 6/16 Amps 2/3 Pin combined 2 module | 12 | Each | |
37 | 33 | S & F Modular switch Bell Push 6/10 Amps single pole one way. | 2 | Each | |
38 | 34 | S&F Bell Ding Dong AC 230 volts type single pole as directed, | 2 | Each | |
39 | 35 | S&F modular fan regulator Step type 120W 2module complete all as specified and directed. | 9 | Each | |
40 | 36 | S&F ceiling rose surface backelet ISI marked 2 to 3 terminal all as specified. | 39 | Each | |
41 | 37 | Supply& Fixing LED batten fittings 4ft 20 Watt (Min 1800 lumens) 2700K with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete including 2.5 KV surge protector. Cat Part No D532027 of make Wipro or equivalent Model of Bajaj/Havells/Philips | 12 | Each | |
42 | 38 | Supply& Fixing LED Batten fittings 2ft 10 Watt (min 900lumens) 2700K with clamps incl PVC gutties and flexible wire and connecting to ceiling rose complete including 2.5 KV surge protector. Cat part No D531027 of make Wipro or equivalent Bajaj/Havells/Jaquar/Philips | 7 | Each | |
43 | 39 | S&F recess mounting LED panel 15 W 3000Kluminaire white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover including 2.5 KV surge protector. Cat part No D721530 of make Wipro pr equivalent model of Bajaj/Havells/Philips | 13 | Each | |
44 | 40 | Supply& Fixing 20watt LED wall light fitting made up of opal glass warm white color for living & bedroom including 2.5 KV surge protector.Make Philips Cat Part No 30948Gray 20W wall light or eqvt model in WIPRO/Havells | 7 | Each | |
45 | 41 | Supply& Fixing 3watt LED Bedside light fitting for bedroom including 2.5 KV surge protector.Make Philips cat Part NO 48042 3w LED or eqvt model in WIPRO/HAVELLs | 5 | Each | |
46 | 42 | LED light fitting, 1x12 w bulk head luminaries, complete with all accessories and including connection up with twin core twisted flesible copper conductor cable with suitable size of 230v, 50 HZ comple all as specified and directed. Cat part No DA11227 of make Wipro or equivalent model in Bajaj/Havells/Philips | 2 | Each | |
47 | 43 | 26. M&L for sub main wiring with two runs of 2.5 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit & accessories concealed in walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 2.5 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only. | 80 | RM | |
48 | 44 | M&L for sub main wiring with two runs of 4.00 Sqmm single core PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories concealed in walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 4.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only. | 160 | RM | |
49 | 45 | M&L for sub main wiring with two runs of 6.00 Sqmm single core FRLS PVC unsheathed and insulated 1100 Volt grade/Multi stranded copper conductor drawn through PVC conduit and accessories concealed in walls, ceiling floors etc including one run of PVC insulated and unsheathed cable of copper conductor of 6.00 Sqmm single core as earth continuity wire all as specified and directed. Note :- Two runs of single core PVC insulated unshethed cables and one run of earth continuity conductor incl conduit will be messured and paid as one unit length only. | 70 | RM | |
50 | 46 | Taking down & Refixing Exhaust fan 225mm sweep AC, 240 volts,metal body ,in same location after cleaning , greasing and painting with synthetic enamel paint by spreying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan all as specified and directed by Engr in charge. | 4 | Each | |
51 | 47 | Taking down & Refixing Ceiling fan 1200mm sweep AC, 240 volts,Metal body ,after cleaning , greasing and painting with synthetic enamel paint by spreying including filling cavities with filler, one coat after cleaning all dusts etc and connecting up including provision of flexible wire from ceiling rose/connector to fan all as specified and directed by Engr in charge | 9 | Each | |
52 | 48 | Taking down & refixing of existing water heater geyser 25 Ltr capacity Geyser,vertical type with complete accessories in same location after completion of bldg repair. | 3 | Each | |
53 | 49 | M&L for earthing in repairs complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick burried directly in grond earth pit not less than 2.25 mtrs deep below ground level with top edge of the plate not less than 1.50 mtr and beldow nomal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electric plate No-5 conneced to earthing test point all as specified or indicated including testing on completion. | 2 | Each | |
54 | 50 | Supply, fixing, testing and commissioning 30W LED security light fitting with system output of 3000 lumens & with dedicated street light optics, System efficacy of greater than 100lm/W luminarie should have pressure die cast aluminium LM6 housing. Luminaire should have dedicated street light optics for better uniformity & spacing. Luminarie should have air vents in housing for proper thermal management. Min IP preventation should be IP65. System power consumption (including driver losser) should not exceed 20W .The driver is suitable for built in 5KV surge voltage, open/ shortcircuit protection external surge 10KV protection should be provided Cat Part No D923065 of make Wipro or equivalent model of Bajaj/Havells/Jaquar/Philips | 5 | Each | |
55 | 51 | S& F security light bracket made out of GI pipe 25mm light grade ISI marked 1.5 Mtr long bend to shape as required for LED fittings at site including M S Clamp 2 Nos made out of flat iron 50 X 5mm with necessary nuts Bolts and two coats of alluminium paint over a coat of red oxide primer all as directed. | 5 | Each | |
56 | 52 | S & F Sheet metal enclosures with socket plug top and single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20Amp MCB SP of 240 volts. | 6 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail