Sales : +91-777 804 8217
| Name of Work: Construction of 0.50 Unit Boys Dormitory + 02 Nos. Warden Residences at Jawahar Navodaya Vidyalaya, Village-Kalchhina, Ghaziabad (U.P.) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Civil Work | BI01010001010000000000000515BI0100001112 | ||
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | BI01010001010000000000000515BI0100001113 | 1140.22 | Cum |
| 3 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | BI01010001010000000000000515BI0100001114 | 1339.26 | Cum |
| 4 | 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | BI01010001010000000000000515BI0100001115 | 110.95 | Cum |
| 5 | 5 | Supplying and stacking at site. Good earth | BI01010001010000000000000515BI0100001116 | 536.44 | Cum |
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 Cement : coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001117 | 152.62 | Cum |
| 7 | 7 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001118 | 6.81 | Cum |
| 8 | 8 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | BI01010001010000000000000515BI0100001119 | 142.5 | Sqm |
| 9 | 9 | Centering and shuttering including strutting, propping etc. and removal of form for all heights: | BI01010001010000000000000515BI0100001120 | ||
| 10 | 10 | Foundations, footings, bases of columns, etc. for mass concrete | BI01010001010000000000000515BI0100001121 | 557.23 | Sqm |
| 11 | 11 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc | BI01010001010000000000000515BI0100001122 | 102.2 | Sqm |
| 12 | 12 | Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001123 | 817.03 | Sqm |
| 13 | 13 | Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like | BI01010001010000000000000515BI0100001117 | 142.81 | Sqm |
| 14 | 14 | Edges of slabs and breaks in floors and walls Under 20 cms wide | BI01010001010000000000000515BI0100001118 | 933.6 | metre |
| 15 | 15 | Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick | BI01010001010000000000000515BI0100001119 | 787.28 | Sqm |
| 16 | 16 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick | BI01010001010000000000000515BI0100001120 | 706.45 | Sqm |
| 17 | 17 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 50 mm thick | BI01010001010000000000000515BI0100001121 | 40.92 | Sqm |
| 18 | 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | BI01010001010000000000000515BI0100001122 | 40676.8 | kilogram |
| 19 | 19 | Providing and fixing sheet covering over expansion joints with iron screws as per design. | BI01010001010000000000000515BI0100001123 | ||
| 20 | 20 | Aluminium fluted strips 3.15 mm thick. 200 mm wide | BI01010001010000000000000515BI0100001113 | 77.12 | Metre |
| 21 | 21 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. | BI01010001010000000000000515BI0100001114 | 138.72 | metre |
| 22 | 22 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). | BI01010001010000000000000515BI0100001115 | ||
| 23 | 23 | All works upto plinth level | BI01010001010000000000000515BI0100001116 | 159.14 | Cum |
| 24 | 24 | All works above plinth level upto floor V level | BI01010001010000000000000515BI0100001117 | 183.05 | Cum |
| 25 | 25 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | BI01010001010000000000000515BI0100001118 | 410.62 | Quintal |
| 26 | 26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: | BI01010001010000000000000515BI0100001119 | ||
| 27 | 27 | Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001120 | 60.89 | Cum |
| 28 | 28 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: | BI01010001010000000000000515BI0100001121 | ||
| 29 | 29 | Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001122 | 177.3 | Cum |
| 30 | 30 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) | BI01010001010000000000000515BI0100001123 | 677.87 | sqm |
| 31 | 31 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. | BI01010001010000000000000515BI0100001117 | 677.87 | sqm |
| 32 | 32 | Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand). | BI01010001010000000000000515BI0100001118 | 190 | metre |
| 33 | 33 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. | BI01010001010000000000000515BI0100001119 | ||
| 34 | 34 | Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001120 | 38.4 | Sqm |
| 35 | 35 | Granite of any colour and shade Area of slab over 0.50 sqm | BI01010001010000000000000515BI0100001121 | 15.24 | sqm |
| 36 | 36 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | BI01010001010000000000000515BI0100001122 | ||
| 37 | 37 | Marble work | BI01010001010000000000000515BI0100001123 | 142.94 | metre |
| 38 | 38 | Granite work | BI01010001010000000000000515BI0100001113 | 16.46 | metre |
| 39 | 39 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. | BI01010001010000000000000515BI0100001114 | 5 | each |
| 40 | 40 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade | BI01010001010000000000000515BI0100001115 | 0.86 | Each |
| 41 | 41 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood | BI01010001010000000000000515BI0100001116 | 0.96 | cum |
| 42 | 42 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). | BI01010001010000000000000515BI0100001117 | 220.49 | Sqm |
| 43 | 43 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws | BI01010001010000000000000515BI0100001118 | 123.12 | sqm |
| 44 | 44 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | BI01010001010000000000000515BI0100001119 | 96.08 | sqm |
| 45 | 45 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | BI01010001010000000000000515BI0100001120 | 219.2 | Sqm |
| 46 | 46 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). | BI01010001010000000000000515BI0100001121 | 24.57 | sqm |
| 47 | 47 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters Kiln seasoned and chemically treated hollock wood | BI01010001010000000000000515BI0100001122 | 36.96 | Sqm |
| 48 | 48 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | BI01010001010000000000000515BI0100001123 | 3479.6 | kg |
| 49 | 49 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading | BI01010001010000000000000515BI0100001117 | 152.89 | sqm |
| 50 | 50 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm | BI01010001010000000000000515BI0100001118 | 24 | each |
| 51 | 51 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 90 mm | BI01010001010000000000000515BI0100001119 | 104 | each |
| 52 | 52 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. 250 mm weighing not less than 150 gms | BI01010001010000000000000515BI0100001120 | 310 | each |
| 53 | 53 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75 mm | BI01010001010000000000000515BI0100001121 | 104 | each |
| 54 | 54 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm | BI01010001010000000000000515BI0100001122 | 58 | each |
| 55 | 55 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm | BI01010001010000000000000515BI0100001123 | 96 | each |
| 56 | 56 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper | BI01010001010000000000000515BI0100001113 | 65 | each |
| 57 | 57 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50 mm (base and height) | BI01010001010000000000000515BI0100001114 | 400.16 | metre |
| 58 | 58 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick | BI01010001010000000000000515BI0100001115 | 40.95 | sqm |
| 59 | 59 | Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. decorative veneering on one side and commercial veneering on other side | BI01010001010000000000000515BI0100001116 | 3.36 | sqm |
| 60 | 60 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001117 | 5414.3 | kg |
| 61 | 61 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001118 | 1078.21 | kg |
| 62 | 62 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001119 | 155.63 | kg |
| 63 | 63 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. | BI01010001010000000000000515BI0100001120 | 56 | each |
| 64 | 64 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube | BI01010001010000000000000515BI0100001121 | 795.37 | kg |
| 65 | 65 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes | BI01010001010000000000000515BI0100001122 | 220.49 | sqm |
| 66 | 66 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate | BI01010001010000000000000515BI0100001123 | 27.33 | sqm |
| 67 | 67 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick | BI01010001010000000000000515BI0100001117 | 2.73 | sqm |
| 68 | 68 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick | BI01010001010000000000000515BI0100001118 | 68.33 | metre |
| 69 | 69 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. | BI01010001010000000000000515BI0100001119 | 105.36 | sqm |
| 70 | 70 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | BI01010001010000000000000515BI0100001120 | 82.04 | sqm |
| 71 | 71 | Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. | BI01010001010000000000000515BI0100001121 | 32.12 | metre |
| 72 | 72 | Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre. | BI01010001010000000000000515BI0100001122 | 71.51 | Sqm |
| 73 | 73 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001123 | 115.16 | Sqm |
| 74 | 74 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001113 | 581.72 | sqm |
| 75 | 75 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001114 | 167.5 | Sqm |
| 76 | 76 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. | BI01010001010000000000000515BI0100001115 | 12 | each |
| 77 | 77 | 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) | BI01010001010000000000000515BI0100001116 | 729.39 | Sqm |
| 78 | 78 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) | BI01010001010000000000000515BI0100001117 | 2497.06 | Sqm |
| 79 | 79 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm Cement Plaster | BI01010001010000000000000515BI0100001118 | 155.52 | sqm |
| 80 | 80 | 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001119 | 689.32 | Sqm |
| 81 | 81 | White washing with lime to give an even shade : New work (three or more coats) | BI01010001010000000000000515BI0100001120 | 947.91 | Sqm |
| 82 | 82 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer | BI01010001010000000000000515BI0100001121 | 1372.65 | sqm |
| 83 | 83 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001122 | 2460.4 | sqm |
| 84 | 84 | Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) | BI01010001010000000000000515BI0100001123 | 357.93 | Sqm |
| 85 | 85 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | BI01010001010000000000000515BI0100001117 | 294.5 | sqm |
| 86 | 86 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | BI01010001010000000000000515BI0100001118 | 609.45 | Sqm |
| 87 | 87 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or more coats on new work | BI01010001010000000000000515BI0100001119 | 79.84 | sqm |
| 88 | 88 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001120 | 2460.4 | Sqm |
| 89 | 89 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. | BI01010001010000000000000515BI0100001121 | 532.56 | sqm |
| 90 | 90 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm). | BI01010001010000000000000515BI0100001122 | 702.23 | Sqm |
| 91 | 91 | Providing and laying cinder filling in sunken floors and other locations with approved quality cinder including watering and light ramming etc. required for proper compaction/completion of the work complete in all respects as per drawings and as directed by the Engineer in Charge. | BI01010001010000000000000515BI0100001123 | 1.45 | Cum |
| 92 | 92 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : | BI01010001010000000000000515BI0100001113 | ||
| 93 | 93 | 150 mm | BI01010001010000000000000515BI0100001114 | 116 | each |
| 94 | 94 | Providing and fixing aluminium door buffer of approved make, design and colour with necessary screws etc all complete as directed and specified by the Engineer-in-Charge : | BI01010001010000000000000515BI0100001115 | 40 | each |
| 95 | 95 | Providing and laying 1st quality ceramic glazed Anti skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) conforming to IS:15622 in all colours, shades, sizes as approved over 20 mm thick bed of Cement Mortar 1: 4 (1 cement : 4 Coarse Sand) including pointing the joints with white cement and matching pigment etc complete in all respects as per specifications/drawings and to the entire satisfaction to the Architect. | BI01010001010000000000000515BI0100001116 | 32.83 | sqm |
| 96 | 96 | SANITARY WORK | BI01010001010000000000000515BI0100001117 | ||
| 97 | 97 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : | BI01010001010000000000000515BI0100001118 | ||
| 98 | 98 | All kinds of soil, Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | BI01010001010000000000000515BI0100001119 | 512.17 | metre |
| 99 | 99 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 110 mm diameter | BI01010001010000000000000515BI0100001120 | 14 | metre |
| 100 | 100 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm | BI01010001010000000000000515BI0100001121 | 3 | each |
| 101 | 101 | Bend 87.5° 110 mm bend & Shoe (Plain) 110 mm Shoe | BI01010001010000000000000515BI0100001122 | 6 | each |
| 102 | 102 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm | BI01010001010000000000000515BI0100001123 | 6 | Each |
| 103 | 103 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. | BI01010001010000000000000515BI0100001117 | 16 | Each |
| 104 | 104 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: | BI01010001010000000000000515BI0100001118 | ||
| 105 | 105 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001119 | 14 | Each |
| 106 | 106 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : | BI01010001010000000000000515BI0100001120 | ||
| 107 | 107 | W.C. pan with ISI marked black solid plastic seat and lid | BI01010001010000000000000515BI0100001121 | 2 | each |
| 108 | 108 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively. | BI01010001010000000000000515BI0100001122 | 4 | Each |
| 109 | 109 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: | BI01010001010000000000000515BI0100001123 | ||
| 110 | 110 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001113 | 2 | Each |
| 111 | 111 | Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm | BI01010001010000000000000515BI0100001114 | 6 | Each |
| 112 | 112 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001115 | 2 | each |
| 113 | 113 | Providing and fixing toilet paper holder : Vitreous china | BI01010001010000000000000515BI0100001116 | 2 | Each |
| 114 | 114 | Providing and fixing soil, waste and vent pipes : | BI01010001010000000000000515BI0100001117 | ||
| 115 | 115 | 100 mm dia. Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 | BI01010001010000000000000515BI0100001118 | 80 | metre |
| 116 | 116 | 75mm diameter Centrifugally cast (spun) iron socketed pipe as per IS: 3989 | BI01010001010000000000000515BI0100001119 | 65 | metre |
| 117 | 117 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : | BI01010001010000000000000515BI0100001120 | ||
| 118 | 118 | 100 mm dia. pipe | BI01010001010000000000000515BI0100001121 | 35 | each |
| 119 | 119 | 75 mm dia. pipe | BI01010001010000000000000515BI0100001122 | 2 | each |
| 120 | 120 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. | BI01010001010000000000000515BI0100001123 | ||
| 121 | 121 | 100 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001117 | 18 | Each |
| 122 | 122 | 75 mm Sand cast iron S&S as per IS- 3989 | BI01010001010000000000000515BI0100001118 | 2 | Each |
| 123 | 123 | Providing and fixing plain bend of required degree. | BI01010001010000000000000515BI0100001119 | ||
| 124 | 124 | 100 mm Sand cast iron S&S as per IS : 3989 | BI01010001010000000000000515BI0100001120 | 32 | Each |
| 125 | 125 | 75 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001121 | 2 | Each |
| 126 | 126 | Providing and fixing heel rest sanitary bend | BI01010001010000000000000515BI0100001122 | ||
| 127 | 127 | 100 mm dia Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001123 | 4 | Each |
| 128 | 128 | 75 mm dia Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001113 | 1 | Each |
| 129 | 129 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. | BI01010001010000000000000515BI0100001114 | ||
| 130 | 130 | 100x100x100mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001115 | 9 | Each |
| 131 | 131 | 75x75x75mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001116 | 1 | Each |
| 132 | 132 | Providing and fixing single equal plain junction of required degree | BI01010001010000000000000515BI0100001117 | ||
| 133 | 133 | 100x100x100mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001118 | 14 | Each |
| 134 | 134 | 75x75x75mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001119 | 1 | Each |
| 135 | 135 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : | BI01010001010000000000000515BI0100001120 | ||
| 136 | 136 | 100 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001121 | 10 | Each |
| 137 | 137 | 75 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001122 | 2 | Each |
| 138 | 138 | Providing and fixing terminal guard : | BI01010001010000000000000515BI0100001123 | ||
| 139 | 139 | 100 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001117 | 9 | Each |
| 140 | 140 | 75 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001118 | 1 | Each |
| 141 | 141 | Providing and fixing collar : | BI01010001010000000000000515BI0100001119 | ||
| 142 | 142 | 100 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001120 | 20 | Each |
| 143 | 143 | 75 mm Sand cast iron S&S as per IS - 3989 | BI01010001010000000000000515BI0100001121 | 1 | Each |
| 144 | 144 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : | BI01010001010000000000000515BI0100001122 | ||
| 145 | 145 | 100 mm | BI01010001010000000000000515BI0100001123 | 25 | Each |
| 146 | 146 | 75 mm | BI01010001010000000000000515BI0100001113 | 20 | Each |
| 147 | 147 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : | BI01010001010000000000000515BI0100001114 | ||
| 148 | 148 | 100 mm | BI01010001010000000000000515BI0100001115 | 9 | Each |
| 149 | 149 | 75 mm | BI01010001010000000000000515BI0100001116 | 1 | Each |
| 150 | 150 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand Cast Iron S&S as per IS: 1729 | BI01010001010000000000000515BI0100001117 | 14 | Each |
| 151 | 151 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia | BI01010001010000000000000515BI0100001118 | 30 | metre |
| 152 | 152 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 75 mm diameter pipe | BI01010001010000000000000515BI0100001119 | 10 | metre |
| 153 | 153 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms | BI01010001010000000000000515BI0100001120 | 6 | each |
| 154 | 154 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms | BI01010001010000000000000515BI0100001121 | 2 | each |
| 155 | 155 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. | BI01010001010000000000000515BI0100001122 | 2 | Each |
| 156 | 156 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | BI01010001010000000000000515BI0100001123 | 2 | Each |
| 157 | 157 | Providing and fixing 8mm dia C.P / S.S Jet with flexible tube upto 1 metre long with S.S triangular plate to Eureopean type W.C of quality and make as approved by engineer-in-charge. | BI01010001010000000000000515BI0100001117 | 2 | Each |
| 158 | 158 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching & refilling. External work | BI01010001010000000000000515BI0100001118 | ||
| 159 | 159 | 32mm dia nominal bore | BI01010001010000000000000515BI0100001119 | 30 | metre |
| 160 | 160 | 40mm dia nominal bore | BI01010001010000000000000515BI0100001120 | 30 | metre |
| 161 | 161 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall | BI01010001010000000000000515BI0100001121 | ||
| 162 | 162 | 20 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001122 | 25 | Metre |
| 163 | 163 | 25 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001123 | 30 | Metre |
| 164 | 164 | 32 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001113 | 20 | metre |
| 165 | 165 | 40 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001114 | 40 | metre |
| 166 | 166 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. | BI01010001010000000000000515BI0100001115 | ||
| 167 | 167 | 15 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001116 | 20 | Metre |
| 168 | 168 | 20 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001117 | 60 | Metre |
| 169 | 169 | 25 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001118 | 30 | metre |
| 170 | 170 | 32 mm nominal outer dia Pipes | BI01010001010000000000000515BI0100001119 | 25 | Metre |
| 171 | 171 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : | BI01010001010000000000000515BI0100001120 | ||
| 172 | 172 | 25 to 40 mm nominal bore | BI01010001010000000000000515BI0100001121 | 4 | each |
| 173 | 173 | Providing and fixing brass stop cock of approved quality : | BI01010001010000000000000515BI0100001122 | ||
| 174 | 174 | 15 mm nominal bore | BI01010001010000000000000515BI0100001123 | 2 | each |
| 175 | 175 | 20 mm nominal bore | BI01010001010000000000000515BI0100001117 | 16 | each |
| 176 | 176 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : | BI01010001010000000000000515BI0100001118 | ||
| 177 | 177 | 25mm nominal bore | BI01010001010000000000000515BI0100001119 | 4 | Each |
| 178 | 178 | 32mm nominal bore | BI01010001010000000000000515BI0100001120 | 6 | Each |
| 179 | 179 | 40mm nominal bore | BI01010001010000000000000515BI0100001121 | 12 | Each |
| 180 | 180 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore | BI01010001010000000000000515BI0100001122 | 2 | Each |
| 181 | 181 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 25 mm nominal bore | BI01010001010000000000000515BI0100001123 | 2 | each |
| 182 | 182 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore | BI01010001010000000000000515BI0100001113 | 8 | each |
| 183 | 183 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter | BI01010001010000000000000515BI0100001114 | 5 | each |
| 184 | 184 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Rectangular tank | BI01010001010000000000000515BI0100001115 | 11000 | Per litre |
| 185 | 185 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore | BI01010001010000000000000515BI0100001116 | 15 | Each |
| 186 | 186 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore | BI01010001010000000000000515BI0100001117 | 17 | each |
| 187 | 187 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. | BI01010001010000000000000515BI0100001118 | 4 | each |
| 188 | 188 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore | BI01010001010000000000000515BI0100001119 | 20 | Each |
| 189 | 189 | Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia. | BI01010001010000000000000515BI0100001120 | 25 | each |
| 190 | 190 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. | BI01010001010000000000000515BI0100001121 | 15 | each |
| 191 | 191 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : | BI01010001010000000000000515BI0100001122 | ||
| 192 | 192 | 100 mm diameter | BI01010001010000000000000515BI0100001123 | 10 | metre |
| 193 | 193 | 150 mm diameter | BI01010001010000000000000515BI0100001117 | 30 | metre |
| 194 | 194 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : | BI01010001010000000000000515BI0100001118 | ||
| 195 | 195 | 100 mm diameter S.W. pipe | BI01010001010000000000000515BI0100001119 | 10 | Metre |
| 196 | 196 | 150 mm diameter S.W. pipe | BI01010001010000000000000515BI0100001120 | 30 | Metre |
| 197 | 197 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180 x 150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001121 | 20 | each |
| 198 | 198 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001122 | 23 | each |
| 199 | 199 | Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001123 | 2 | metre |
| 200 | 200 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. | BI01010001010000000000000515BI0100001113 | 10 | each |
| 201 | 201 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter | BI01010001010000000000000515BI0100001114 | 2 | Each |
| 202 | 202 | Providing, laying and jointing non pressure NP2 class (light duty)RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : | BI01010001010000000000000515BI0100001115 | ||
| 203 | 203 | 150 mm dia RCC pipe | BI01010001010000000000000515BI0100001116 | 457.17 | metre |
| 204 | 204 | 250 mm dia RCC pipe | BI01010001010000000000000515BI0100001117 | 80 | metre |
| 205 | 205 | Providing and fixing concealed single lever bath & overhead shower mixer of hindware make and model No. (F360019CP) respectively or equivalent approved make as approved by Engineer in charge. | BI01010001010000000000000515BI0100001118 | 2 | each |
| 206 | 206 | Supplying, fixing, testing and commissioning of storage type water heater (Geyser) etc. with Stainless steel body , copper container , automatic thermostatic control electric element, pressure release valve, M.S. nuts and bolts etc. conforming to IS: 2082 25 Litre Capacity | BI01010001010000000000000515BI0100001119 | 2 | each |
| 207 | 207 | Providing & fixing Sink Mixer with Swinging Casted Spout (Wall Mounted Jaquar model CON-309 KN)/approved equal with 450mm long copper pipes & brass nuts. | BI01010001010000000000000515BI0100001120 | 1 | Each |
| 208 | 208 | Providing and fixing C.P. brass grab bar(600mm long) fixed with C.P. brass screws including all fittings complete.Jaquar model no. AHS-1507/approve equal. | BI01010001010000000000000515BI0100001121 | 2 | Each |
| 209 | 209 | ELECTRICAL WORK | BI01010001010000000000000515BI0100001122 | ||
| 210 | 210 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C | BI01010001010000000000000515BI0100001123 | 120 | Each |
| 211 | 211 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. | BI01010001010000000000000515BI0100001117 | 182 | Metre |
| 212 | 212 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. | BI01010001010000000000000515BI0100001118 | 182 | Metre |
| 213 | 213 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 4 Module (125 mmX75 mm) | BI01010001010000000000000515BI0100001119 | 80 | Each |
| 214 | 214 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. | BI01010001010000000000000515BI0100001120 | ||
| 215 | 215 | 15/16 A switch | BI01010001010000000000000515BI0100001121 | 11 | Each |
| 216 | 216 | 3 pin 5/6 A socket outlet | BI01010001010000000000000515BI0100001122 | 25 | Each |
| 217 | 217 | Telephone socket outlet | BI01010001010000000000000515BI0100001123 | 2 | Each |
| 218 | 218 | TV antenna socket outlet | BI01010001010000000000000515BI0100001113 | 2 | Each |
| 219 | 219 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. | BI01010001010000000000000515BI0100001114 | ||
| 220 | 220 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire | BI01010001010000000000000515BI0100001115 | 200 | metre |
| 221 | 221 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire | BI01010001010000000000000515BI0100001116 | 80 | metre |
| 222 | 222 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire | BI01010001010000000000000515BI0100001117 | 100 | metre |
| 223 | 223 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire | BI01010001010000000000000515BI0100001118 | 125 | metre |
| 224 | 224 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. | BI01010001010000000000000515BI0100001119 | 42 | Metre |
| 225 | 225 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25mm | BI01010001010000000000000515BI0100001120 | 50 | metre |
| 226 | 226 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75 mmX75 mm) | BI01010001010000000000000515BI0100001121 | 80 | each |
| 227 | 227 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair | BI01010001010000000000000515BI0100001122 | 40 | metre |
| 228 | 228 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. | BI01010001010000000000000515BI0100001123 | ||
| 229 | 229 | 20 mm | BI01010001010000000000000515BI0100001117 | 50 | metre |
| 230 | 230 | 25 mm | BI01010001010000000000000515BI0100001118 | 50 | metre |
| 231 | 231 | Providing and fixing in position 2mm thick M.S. Telephone junction box of size suitable for fixing of following Krone Tag Block with key lock arrangement. Also provide clamps for fixing tag blocks. 10 pair Telephone Tag Block with box | BI01010001010000000000000515BI0100001119 | 1 | each |
| 232 | 232 | Supplying, laying of 10 pair unarmoured PVC insulated copper conductor (ATC) telephone cable in ground/existing pipes/on wall and making connection with telephone main junction box (MDF) including supports and all accessories as required 10 Pair Cable unarmoured | BI01010001010000000000000515BI0100001120 | 50 | Metre |
| 233 | 233 | Supplying of following box type Fl. fitting made out of CRCA sheet finished in antirust treated non-yellowing super white stove enamelled paint duly wired with copper wound heavy duty choke starter holder, starter but without lamp complete etc. as reqd. Mounting rail for TLED lamps 1600 Lumens (TMC 501 P 1xT-LED with Essential LED 18W Tube) | BI01010001010000000000000515BI0100001121 | 60 | each |
| 234 | 234 | Sereno 42 watt 2950 lumens philips SP824 P LED 30S-5000 GR OA | BI01010001010000000000000515BI0100001122 | 4 | each |
| 235 | 235 | Supplying of wall mounted suitable for 1300 Lumens complete with ballast & accessories such as wire guard etc. complete as required.15W Astra Surface & wall mounted 1300 Lumens ( Philips BN150W LED13S-6500 PSE OD GR ) | BI01010001010000000000000515BI0100001123 | 4 | each |
| 236 | 236 | Supplying of wall bracket light fittings suitable for 11 / 13 W CFL lamp. The fitting shall be made up of M.S. powder coated provided with integral ballast, frosted glass and 1 no. 11 / 13 W lamp duly wired upto the connector block complete as required. (Decon Cat. No.05AAM) | BI01010001010000000000000515BI0100001113 | 18 | each |
| 237 | 237 | Supplying of ceiling light fittings suitable for 1 x 15/20 W LED lamp. The fitting shall be made up of M.S. powder coated provided with electronic ballast, 1 no. 15/20 W LED lamp duly wired upto the connector block etc. complete as required. Cirrus Mini Pro 15 / 20 watt & 1100 /1600 Lumens (Philips SM200C LED11S 6500 PSU OD WH) | BI01010001010000000000000515BI0100001114 | 46 | Each |
| 238 | 238 | Supplying of bulk head fittings suitable for 10 W LED lamp complete with ballast & accessories such as glass, wire guard, 60 W CFL lamp etc. complete as required. Endural LED-Bulkhead, 10 W, 600 lumen Such as (Philips WT202W LED6S CW PSU S2 PC) | BI01010001010000000000000515BI0100001115 | 4 | Each |
| 239 | 239 | Supplying of exhaust fan, all complete with mounting ring frame i/c bracket, but without regulator with shutters in the following sizes. (G.E. ALSTHOM, KHAITAN & HAVELL'S COMPANY) 300 mm 4 Pole and i/c Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. | BI01010001010000000000000515BI0100001116 | 13 | Each |
| 240 | 240 | Supplying of 1400 mm sweep A.C. electric Ceiling fans, capacitor type with double ball bearing complete with 300 mm down rod, canopies, shackles, blades, but without regulator suitable for operation on 230 / 240 Volts, 50 Hz, single phase, A.C. supply. (CROMPTON, KHAITAN & HAVELL'S COMPANY) Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | BI01010001010000000000000515BI0100001117 | 14 | Each |
| 241 | 241 | Installation, testing and commissioning of pre-wired, Light Fixture / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. | BI01010001010000000000000515BI0100001118 | 272 | Each |
| 242 | 242 | Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as required. | BI01010001010000000000000515BI0100001119 | 36 | Each |
| 243 | 243 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. | BI01010001010000000000000515BI0100001120 | 4 | Each |
| 244 | 244 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 6 way (4 + 18), Double door | BI01010001010000000000000515BI0100001121 | 13 | Each |
| 245 | 245 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 100 A | BI01010001010000000000000515BI0100001122 | 13 | Each |
| 246 | 246 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A | BI01010001010000000000000515BI0100001123 | 13 | each |
| 247 | 247 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps | BI01010001010000000000000515BI0100001117 | 8 | each |
| 248 | 248 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) | BI01010001010000000000000515BI0100001118 | ||
| 249 | 249 | 12 way , Double door | BI01010001010000000000000515BI0100001119 | 4 | each |
| 250 | 250 | 16 way , Double door | BI01010001010000000000000515BI0100001120 | 4 | Each |
| 251 | 251 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. | BI01010001010000000000000515BI0100001121 | ||
| 252 | 252 | 25 A | BI01010001010000000000000515BI0100001122 | 4 | Each |
| 253 | 253 | 40 A | BI01010001010000000000000515BI0100001123 | 4 | Each |
| 254 | 254 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole | BI01010001010000000000000515BI0100001113 | 72 | Each |
| 255 | 255 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. | BI01010001010000000000000515BI0100001114 | 4 | Each |
| 256 | 256 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. | BI01010001010000000000000515BI0100001115 | 20 | meter |
| 257 | 257 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. | BI01010001010000000000000515BI0100001116 | 350 | meter |
| 258 | 258 | Supplying, installing, testing and commissioning of 2 x 36W general purpose flourescent street light fittings with sheet aluminium housing and UV stabilized acrylic cover complete with chokes, starter holders, condensers, reflector cover etc. as reqd. (Philips Cat No. TRC 33 / 236 HPF) (To be fixed directly on wall of building) i/c Supplying and fixing of 32 mm dia X 2.00 meter long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 Nos. 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. | BI01010001010000000000000515BI0100001117 | 2 | set |
| 259 | 259 | Supply of following sizes of FRLS 1.1 KV stranded compact circular aluminium conductor screened with extruded semi conducting compound, XLPE insulated,Al round wire armoured & overall PVC sheathed cableconforming to IS to IS 7098 (Part-I) with latest amendments 2 x 4 sq.mm | BI01010001010000000000000515BI0100001118 | 80 | Metre |
| 260 | 260 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm | BI01010001010000000000000515BI0100001119 | 30 | metre |
| 261 | 261 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm | BI01010001010000000000000515BI0100001120 | 10 | meter |
| 262 | 262 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle) | BI01010001010000000000000515BI0100001121 | 6 | meter |
| 263 | 263 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 2 X 6 sq. mm (19mm) | BI01010001010000000000000515BI0100001122 | 4 | each |
| 264 | 264 | Supply & fixing of 150x200 mm 60mm deep MS junction box recess or surface on wall with 3mm bakalite cover 15 overlapping 15 all sides of junction Box & housing 4way 32amps bakelie connector to terminate incoming & outgoing armoured cable & & wiring the light fixture with 3x1.5 sq mm PVC insulated coppwer wire including interconnection ets as reqired .( Cost of termination of armoured cable with gland is not to be included as the same is payable under separate item no 5.07 of this SUBHEAD) | BI01010001010000000000000515BI0100001123 | 2 | each |
| 265 | 265 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing withcement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required. 100 mm dia | BI01010001010000000000000515BI0100001117 | 20 | Metre |
| 266 | 266 | DEVALOPMENT WORK | BI01010001010000000000000515BI0100001118 | ||
| 267 | 267 | Construction of C.C Road with prepared sub grade with power roller of 8 to 12 tonne and laying WBM in uniform thickness with 90-45mm 63-45mm size stone aggregate and cc pavement of mix M25 and laying bitumen hot sealing compound for expansion jointn complete and as per Drawing & Direction of Engineer-in-charge., | BI01010001010000000000000515BI0100001119 | 319.54 | sqm |
| 268 | 268 | Construction of C.C. Pathway i/c excavation,filling, laying PCC 1:5:10mix, laying 60mm thick interlocking paver block of M30 grade made by block making machine with strong vibratory compaction of approved size design & shape laid in required colour and pattern over and i/c 50mm thick compacted bed of coarse sand, filling joints and laying factory made kerb stone of M25 grade complete and as per Drawing & Direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001120 | 16.45 | sqm |
| 269 | 269 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 32 mm dia nominal bore | BI01010001010000000000000515BI0100001121 | 34.61 | meter |
| 270 | 270 | Construction of Masonary Chamber 60x60x75 inside in Brickwork Cement Mortar 1.6 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 i/c Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality LD- 2.5 Rectangular shape 600*450 mm internal dimensions | BI01010001010000000000000515BI0100001122 | 2 | nos |
| 271 | 271 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering (for thrust blocks at bends and junctions of water lines ) by 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 20 mm nominal size) | BI01010001010000000000000515BI0100001123 | 18.45 | Cum |
| 272 | 272 | Inside size 120 x 90 cm & 90 cm deep including CI cover with frame (Medium duty) 560mm internal diameter, total wt. of cover & frame to be not less than 208 kg (wt. of cover 108 kg and wt. of frame 100 kg) With common burnt clay F.P.S.(non modular) bricks of classic designation 7.5\n | BI01010001010000000000000515BI0100001113 | 6 | each |
| 273 | 273 | Extra for depth for manholes: size 90 X 80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001114 | 4.25 | meter |
| 274 | 274 | size 120 X 90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5\n | BI01010001010000000000000515BI0100001115 | 1.5 | meter |
| 275 | 275 | Providing M.S. foot restsOrange colour Safety footrest With 20x20 mm square bar | BI01010001010000000000000515BI0100001116 | 25 | each |
| 276 | 276 | Construction of Drain 230x350 mm in size including excavation , PCC, B/w, PlasterEtc complete as per Direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001117 | 110.71 | metre |
| 277 | 277 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001118 | 44.23 | Cum |
| 278 | 278 | Incoming- 100Amp MCCB TP 35 KA-1 nos,Indication light R,Y,B-3nos, BUS-BAR FEEDER 150Amp Aluminum bus-bar TPN-1 set,Out going -63Amp MCB TPN 10KA -3nos,63Amp MCB TPN 10KA (SPARE)-1nos, Emergency Section Incoming- 63Amp MCB DP 10KA -1nos, Out going- 25Amp MCB DP 10KA-3nos, 32Amp MCB DP 10KA-1nos, ENCLOSURE 1050*1450*150 (17 SFT) PANEL BODY FABRICATED IN 14/16 SWG CRCA SHEET , POWDER COA- TED IN SIEMENCE GREY COLOUR COMPLETE IN ALL RESPECTS UNIVERSAL GLAND PLATES. | BI01010001010000000000000515BI0100001119 | 1 | set |
| 279 | 279 | Supply installation, testing and commissioning of external post top lantern with following and complete as required. 6m high (5.0m above ground) 65mm dia GI pole as approved, adopting socket at top for fixture mentioned below, base plate 300x300x6mm and provision for mounting junction box etc.- 1 set | BI01010001010000000000000515BI0100001120 | 5 | nos |
| 280 | 280 | Erection of Pole in cement concrete 400x400x1000mm deep 1:3:6 ratio cement concrete foundation including excavation , refilling, secured with holding clamps, bolts, nuts, alighnment of poles casting etc. including 100 mm thick lean concrete shall be provided at the bottom. | BI01010001010000000000000515BI0100001121 | 5 | set |
| 281 | 281 | LED type 50 Watt (Street Light) light fittings of all types with all\naccessories. | BI01010001010000000000000515BI0100001122 | 5 | nos |
| 282 | 282 | Suitable size Control box with 1 no. incoming and 2 nos. outgoing terminals and 2 nos. tap-out terminal with 1 no.5A HRC fuses complet 1 set | BI01010001010000000000000515BI0100001123 | 5 | Nos |
| 283 | 283 | Suitable number (S) 40mm dia Class-B GI Pipes(s) from above control box to upto 0.5 meter below ground level for power cable entry. | BI01010001010000000000000515BI0100001117 | 5 | nos |
| 284 | 284 | Supply of following size of 1.1 KV grade multicore aluminium cunductor PVC sheathed armoured cable as per IS 1554. | BI01010001010000000000000515BI0100001118 | ||
| 285 | 285 | 3.5 Core 35 Sqmm | BI01010001010000000000000515BI0100001119 | 44.04 | meter |
| 286 | 286 | 4 Core 25 Sqmm | BI01010001010000000000000515BI0100001120 | 44.04 | meter |
| 287 | 287 | 2 Core 10 Sqmm | BI01010001010000000000000515BI0100001121 | 77.4 | set |
| 288 | 288 | Earthing with GI earth plate 600 x 600 x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.ith watering pipe of 2.7 meter long etc. with charcoal or coke and salt complete as required. (for MLTP & DG body) | BI01010001010000000000000515BI0100001122 | 2 | set |
| 289 | 289 | Providing and fixing 25 mm x 5 mm GI strip in 40 mm dia G.I.pipe from earth electrode, including connection with brass nut bolts , spring washer, excavation and refilling etc, as required ( copper GI plate earthing) | BI01010001010000000000000515BI0100001123 | 10 | Meter |
| 290 | 290 | Providing and fixing 25mm x 5 mm G.I. strips on surface or in recess for connections etc. as required | BI01010001010000000000000515BI0100001113 | 10 | Meter |
| 291 | 291 | Providing and fixing MV danger notice plate of 200 mm x 150 mm made of mild steel atleast 2 mm thick and vitreous enameled white on both sides & with inscription in signal red colour on front side as required.( on 7mts poles & panels) | BI01010001010000000000000515BI0100001114 | 8 | nos |
| 292 | 292 | Laying of one number XLPE insulated and PVC sheathed power cable of 1.1KV grade of following sizes direct in ground including excavation sand cushioning protection covering and refilling the trench etc. as required. Size not exceeding 35 Sqmm | BI01010001010000000000000515BI0100001115 | 165.48 | rmt |
| 293 | 293 | Supplying and making end termination with brass comperession gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required | BI01010001010000000000000515BI0100001116 | ||
| 294 | 294 | 2.00 x 10 sq.mm. | BI01010001010000000000000515BI0100001117 | 10 | nos |
| 295 | 295 | 4.00 x 25 sq.mm. | BI01010001010000000000000515BI0100001118 | 10 | nos |
| 296 | 296 | 3.50 x 35 sq.mm. | BI01010001010000000000000515BI0100001119 | 6 | nos |
| 297 | 297 | RAINWATER HARVESTING WORK | BI01010001010000000000000515BI0100001120 | ||
| 298 | 298 | Construction ofrain water harvesting i/c all structure work as per structural drawing i/c boring 300mm dia 20m depth,assembling lowering upvc pipe 150mm dia , supply & filling Stone bolder 50mm to 20mm, gravel 5 to 20mm, gravel 5 to 10mm, coarse sand 1.5 to 2mm , gravel packing in tube well i/c all material labour T&P complete. | BI01010001010000000000000515BI0100001121 | 4 | job |
| 299 | 299 | making Desilting chamber as per drawing | BI01010001010000000000000515BI0100001122 | 4 | job |
| 300 | 300 | R.O. Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including paintingwith anti corrosive bitumastic paint, cutting chases and making goodthe wall : 15mm dia. nominal bore. | BI01010001010000000000000515BI0100001123 | 40 | meter |
| 301 | 301 | Cost Of Submersible Pump 0.5 H.P I/C Accessories Insttaled comp. | BI01010001010000000000000515BI0100001117 | 1 | each |
| 302 | 302 | STP | BI01010001010000000000000515BI0100001118 | ||
| 303 | 303 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001119 | 68.25 | cum |
| 304 | 304 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001120 | 67.5 | Cum |
| 305 | 305 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): Flush / Ruled/ Struck or weathered pointing | BI01010001010000000000000515BI0100001121 | 149.76 | sqm |
| 306 | 306 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001122 | 1.81 | Cum |
| 307 | 307 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | BI01010001010000000000000515BI0100001123 | 4.5 | sqm |
| 308 | 308 | Supply and Filling of washed Stone gravel in size 60-100 mm including all labour and T&P etc complete as per Direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001113 | 35.39 | Cum |
| 309 | 309 | Supply and Filling of washed Stone gravel in size 20-30 mm including all labour and T&P etc complete. as per Direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001114 | 543.52 | Cum |
| 310 | 310 | Supply and fixing of GI wire mesh with Angle iron including cutting , welding & fixing etc complete as per direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001115 | 25.28 | sqm |
| 311 | 311 | Plantation of Typha Latifolia plants in treatment zone fro treating of waste water including all labour and T&P etc complete | BI01010001010000000000000515BI0100001116 | 1218 | nos |
| 312 | 312 | Providing and fixing of PVC slotted Pipe 6\" Dia High Pressure/8-10 mm wall Thicknes including all labour and T&P etc complete. | BI01010001010000000000000515BI0100001117 | 52.5 | meter |
| 313 | 313 | Providing and fixing of PVC Pipe 110 mm dia with 6kg/sqcm pressure including all labour and T&P etc complete. | BI01010001010000000000000515BI0100001118 | 7.2 | meter |
| 314 | 314 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm nominal inner dia Pipes | BI01010001010000000000000515BI0100001119 | 165 | Mtr |
| 315 | 315 | Providing and fixing of V-Notch 2.5 m thick SS plate with marking of flow level as per design including all labour and T&P etc complete as per direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001120 | 1 | job |
| 316 | 316 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore | BI01010001010000000000000515BI0100001121 | 2 | nos |
| 317 | 317 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter Class II | BI01010001010000000000000515BI0100001122 | 2 | Nos |
| 318 | 318 | Supply and laying of Polyvinyl chloride sheet 400 micron thick sheet including all labour and T&P etc as per direction of Engineer-in-Charge. | BI01010001010000000000000515BI0100001123 | 67.5 | sqm |
| 319 | 319 | Construction of Drain 250x300 mm in size including excavation , PCC, B/w, PlasterEtc complete as per Direction of Engineer-in-charge. \n\n | BI01010001010000000000000515BI0100001117 | 40 | meter |
| 320 | 320 | GTS extra as per applicable | BI01010001010000000000000515BI0100001129 |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
