| 1 | 1 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.\nIn ground floor including roof.(a) upto 150 mm. thick | 1 | 9.57 | m3 |
|---|
| 2 | 2 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.\na) In ground floor including roof. | 2 | 127.79 | m2 |
|---|
| 3 | 3 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. | 3 | 764.26 | m2 |
|---|
| 4 | 4 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge | 4 | 31.24 | m3 |
|---|
| 5 | 5 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.Pakur variety | 5 | 6 | m2 |
|---|
| 6 | 6 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other,incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I\n(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. | 6 | 120.01 | m2 |
|---|
| 7 | 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). | 7 | 120.01 | m2 |
|---|
| 8 | 7.01 | (ii) With 1:6 cement mortar\n(c) 15 mm thick plaster | 7.01 | 322.63 | m2 |
|---|
| 9 | 7.02 | (ii) With 1:6 cement mortar\n(c) 20 mm thick plaster | 7.02 | 309.32 | m2 |
|---|
| 10 | 8 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in groundfloor.\n(ii) Grill weighing above 16 Kg./sq.mtr and above | 8 | 2.733 | Qtl |
|---|
| 11 | 9 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. | 9 | 7.2 | m2 |
|---|
| 12 | 10 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. | 10 | 309.32 | m2 |
|---|
| 13 | 11 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | 11 | 51.48 | m2 |
|---|
| 14 | 11.01 | b) On timber surface\n(vi) Two coats ( with any shade except white) | 11.01 | 78.09 | m2 |
|---|
| 15 | 12 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :\nA) In Ground Floor | 12 | 51.48 | m2 |
|---|
| 16 | 12.01 | a) On timber or plastered surface : | 12.01 | 78.09 | m2 |
|---|
| 17 | 13 | (b) Rendering the surface of walls and ceiling with white cement based\nwall putty of approved make and brand(1.5mm thick) | 13 | 322.63 | m2 |
|---|
| 18 | 14 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)\n(a) One Coat | 14 | 322.63 | %m2 |
|---|
| 19 | 15 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :(Two coats) | 15 | 322.63 | m2 |
|---|
| 20 | 16 | Earth work in Excavation in foundation trenches or drains in all sorts of soils (including mixed soil but excluding laterite or sand stone) including removing spreding or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, ievelling, dressing and ramming the bottom bailling out water as required complete. | 16 | 3.94 | %m2 |
|---|
| 21 | 17 | Earth work in filling in foundation trenches or plinth with good earth in layer not exceeding 150 mm.including watering and ramming etc. layer by layer complete.(Payment to be made on basis of finished quality of work) | 17 | 0.79 | %m2 |
|---|
| 22 | 18 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating same by through saturation with water ramming complete including the cost of supply of sand (Payment to be made on the basis of measurment of finished quantity of work). | 18 | 5.38 | %m2 |
|---|
| 23 | 19 | Single brick flat soling in floor & foundation with picked/jhama bricks including filling up joints with fine sand. | 19 | 11.47 | m2 |
|---|
| 24 | 20 | Cement Concrete with graded stone ballast (40 mm size) excluding shuttering In ground floor.\na) 6:3:1 proportion | 20 | 10.97 | m3 |
|---|
| 25 | 21 | Ordinary Cement Concrete (Mix 3:1.5:1) with graded stone chips (20 mm.size) excluding shuttering and reinforcement, if any, in ground floor as per 456-2000. | 21 | 0.18 | m3 |
|---|
| 26 | 22 | Brickwork with first class bricks in cement mortar (6:1).\nA) In foundation & plinth . | 22 | 2.34 | m3 |
|---|
| 27 | 23 | Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening & removal of loose rust (if necessary), cutting to requisite length, hooking & bending to correct shape, placing in proper position & binding with 16-gauge black annealedwire at every intersection, complete as per drawing & direction. Tor/Mild steel. | 23 | 0.02 | MT |
|---|
| 28 | 24 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) | 24 | 3.13 | m2 |
|---|
| 29 | 25 | 125 mm thick brick work with 1st class brick in cement sand morter (1:4) including curing etc. complete as directed. In ground Floor. | 25 | 23.35 | m2 |
|---|
| 30 | 26 | (a) 75 mm. thick brick work with 1st class bricks set in cement, sand mortar\n(1:4) in ground floor including H.B. netting in every alternate layers. | 26 | 1.65 | m2 |
|---|
| 31 | 27 | R.C. shelves (1:1.5:3) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8% main and 0.2% distribution bars), shuttering etc. and 10 mm. thick cement plaster (1:4) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages as necessary complete. In ground floor\n(a) 50 mm. Thick panels | 27 | 2.9 | m2 |
|---|
| 32 | 28 | Plaster (to floor, ceiling etc.) with sand cement morter including rounding off or chamfering corner as directed and racking out joints or roughtening of concrete surface where ncessary.\nA) With (4:1) cement morter 10mm thick . | 28 | 23.35 | m2 |
|---|
| 33 | 29 | Neat cement punning on wall, dado etc. (about 1.5mm thick.) | 29 | 13.01 | m2 |
|---|
| 34 | 30 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile &\nfinishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.\n(A) Floor\nWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. | 30 | 5.35 | m2 |
|---|
| 35 | 30.01 | (B) Wall\nWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. | 30.01 | 1.59 | m2 |
|---|
| 36 | 31 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. | 31 | 1 | No. |
|---|
| 37 | 32 | Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) | 32 | 19.98 | m2 |
|---|
| 38 | 33 | (A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc.\nfitted and fixed complete (excluding the cost of bolts, paints, but including the cost\nof nails, screws etc.) | 33 | 0.19 | m2 |
|---|
| 39 | 34 | Wood work in door and window frame fitted and fixed complete including a protective coat of painting at the contact surface of the frem. | 34 | 0.23 | m3 |
|---|
| 40 | 35 | Panel shutter for door and window as per design (each panel consisting of single plank without joint ) including fitting & fixing in position but excluding the cost of hinges and other fittings.\n(A) 40 mm thick shutterwith 19mm thick panel of size 30 to 45 cm. | 35 | 10 | m2 |
|---|
| 41 | 36 | Provading & fixing Sign Board | 36 | 1 | No. |
|---|
| 42 | 37 | GST as applicable on as per (Notification No. 20/2017 intrigrated Tax (Rate) New Delhi the 22nd August 2017) of Govt. of Indian ministry of Finance (Department of Revenue) @ 12% | 37 | 82710 | m2 |
|---|
| 43 | 38 | Labour Welfare | 38 | 7719 | No. |
|---|
