| 1 | 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) all as specified and directed | | 8.68 | Cum |
|---|
| 2 | 2 | Dismantling floor, hearth or wall tiling including cement mortarbedding (but not backing coat) | | 349.5 | Sqm |
|---|
| 3 | 3 | M & L for 25 mm thick PCC 1 :2 : 4 type B0 ( Using 12.5 graded stone aggregate ) as in base of floors complete all as specified and as directed by Engineer-in-Charge. | | 22.68 | Sqm |
|---|
| 4 | 4 | M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick in CM (1:6) Screed bed or bedding layer of mortar for laying floor finishes all as specified and directed. | | 170 | Sqm |
|---|
| 5 | 5 | Ditto all as in item No.4 above but as in skirting /dados including 10mm thick rendering in CM 1:4 complete all as specified and directed. | | 9.5 | Sqm |
|---|
| 6 | 6 | M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile n exceeding 0.11 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick in CM (1:6) Screed bed or bedding layer of mortar for laying floor finishes all as specified and directed. | | 22.68 | Sqm |
|---|
| 7 | 7 | M&L Coloured Glazed ceramic tiles 350 x 250 x 7 mm/450X300X7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 all as specified and directed. | | 170 | Sqm |
|---|
| 8 | 8 | Demolition of brick work or stone masonry or block masonry built in cement or cement/lime mortar. | | 1 | Cum |
|---|
| 9 | 9 | M&L for PCC solid block masonry of blocks of type C1 (20mm graded stone aggregate) (1:3:6) wall exceeding 10cm in width & built in CM (1:6) complete all as specified and directed. | | 4 | Cum |
|---|
| 10 | 10 | Demolition of cement concrete (reinforcement) cut as required to facilitate demolition)of any description in any position. | | 0.6 | Cum |
|---|
| 11 | 11 | Dismantling of old Granite slab of any description. | | 0.98 | XSqm |
|---|
| 12 | 12 | M & L for 20mm thick Granite slab machine cut in floors, laid over cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete including screed bed 15mm thick in CM 1:4. | | 8 | Sqm |
|---|
| 13 | 13 | M & L for 20mm thick Granite slab machine cut in dado/skirting over cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete including rendering of 10mm thick in CM 1:4. | | 1.75 | Sqm |
|---|
| 14 | 14 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. | | 10.8 | RM |
|---|
| 15 | 15 | Taking down cement or cement lime plaster on brick or stone walls,ceilings etc. including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed. | | 600 | Sq m |
|---|
| 16 | 16 | M & L for 15 mm thick plastering in cement mortar 1:4 on external plaster finished the surfaces ( upto any height) complete all as specified and directed. | | 200 | Sqm |
|---|
| 17 | 17 | All as par item No. 16 above but 10mm thick in CM 1:4 finished even & smooth with thin layer of sagol finish as in ceiling complete all as specified and directed | | 100 | Sqm |
|---|
| 18 | 18 | M&L for applying two coats of cement base paint on walls including prepration of new surface all as specified and directed. | | 212 | sqm |
|---|
| 19 | 19 | M&L for applying two coats of cement base paint on walls including complete removal of existing treatment of old surfaces all as specified and directed | | 172 | sqm |
|---|
| 20 | 20 | M & L for applying three coat of white wash on ceiling including preparation of new surfaces all as specified and directed. | | 100 | Sqm |
|---|
| 21 | 21 | M & L for applying one coat of white wash on celing on old surfaces including preparation of old surfaces all as specified and directed. | | 134 | sqm |
|---|
| 22 | 22 | M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing the surface with a thin layer of sagol all as specified and directed. | | 300 | Sqm |
|---|
| 23 | 23 | M & L preperation of new plastered surfaces & applying two coats of oil bound distember over a coat of alkali resistant primer. | | 300 | Sqm |
|---|
| 24 | 24 | .M&L for complete removal of existing finishes and applying two coats of oil bound distemper on walls over a coat of alkali resistant primer including chalk whiting preparation of old surfaces , on plastered surfaces prepratary to distempering all as specified. | | 120 | Sqm |
|---|
| 25 | 25 | M& L for complete removal of existing finishes and applying three coats of white wash on walls including preparation of old surfaces all as specified and directed. | | 50 | Sqm |
|---|
| 26 | 26 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50m but n. exc 4.00 sqm | | 6 | Each |
|---|
| 27 | 27 | Taking down shutter of any description exc 1 Sqm n exc 2 Sqm and refixing in the same opening complete all as specified by Engineer in Charge. | | 6 | Per Leaf |
|---|
| 28 | 28 | S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, size of frame 105 x 60mm. | | 15.6 | RM |
|---|
| 29 | 29 | All as item No 28 above but size of frame 125x60mm. | | 15.6 | RM |
|---|
| 30 | 30 | M&L For PCC cement concrete type C0, 1:3:6 (12.5 mm graded aggregate) in door and windows frames, any size, single or double rebated, including arrangement for fixing of hinges and fixtures as required | | 0.37 | Cum |
|---|
| 31 | 31 | S & F 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as directed. | | 5.16 | Sqm |
|---|
| 32 | 32 | Supplied and fitted to chowkats 35 mm thick factory made Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); all as directed. | | 5.16 | Sqm |
|---|
| 33 | 33 | S & F 30mm thick flush shutters,solid core construction with block board core and plywood face panels, commercial type on both sides all as directed. | | 5.16 | Sqm |
|---|
| 34 | 34 | S & F Aluminium, anodised, barrel tower bolts of extruded section 150mm long. | | 12 | Each |
|---|
| 35 | 35 | S & F Aluminium, anodised, barrel tower bolts of extruded section 200 mm long. | | 15 | Each |
|---|
| 36 | 36 | S & F Aluminium handles, cast type, anodised size 150 mm long. | | 18 | Each |
|---|
| 37 | 37 | S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. | | 6 | Each |
|---|
| 38 | 38 | S & F in repair Mild steel Butt hinges125 mm long, medium weight, cold rolled steel. | | 9 | Each |
|---|
| 39 | 39 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of width or girth exceeding 10 cm including preparation of surfaces all as specified. | | 34.06 | Sqm |
|---|
| 40 | 40 | M&L for applying one coats of synthetic enamel paint on old wooden surfaces of width or girth exceeding 10 cm including preparation of surfaces all as specified. | | 95.38 | Sqm |
|---|
| 41 | 41 | All as per item No 26 above but n. exc. 1.5.Sqm each. | | 17 | Each |
|---|
| 42 | 42 | S&F Solid PVC door frame of size 50mm X47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing. | | 23.74 | RM |
|---|
| 43 | 43 | S & F stainless steel Butt hinges 75 mm long, medium weight, cold rolled steel. | | 15 | Each |
|---|
| 44 | 44 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing Complete all as specified and directed. | | 9.24 | Sqm |
|---|
| 45 | 45 | S & F Aluminium, anodised, barrel tower bolts of extruded section 125mm long complete all as specified and directed. | | 10 | Each |
|---|
| 46 | 46 | S & F Aluminium handles, cast type, anodised size 125 mm long. | | 10 | Each |
|---|
| 47 | 47 | S & F steel windows with side hung shutters including projected type hinges with steel handle steel peg stay complete with glazing bar dovetailed / welded all as directed. | | 11.88 | Sqm |
|---|
| 48 | 48 | All as per item No 47 above but without glazing bars ( for mosquito proof shutter ) | | 11.88 | Sqm |
|---|
| 49 | 49 | S &F mild steel work in framed work such as grills framed guard bars, gratings, ladders etc with ends of bars shouldered and / or riveted or forged into spikes and similar work. | | 98 | Kg |
|---|
| 50 | 50 | S& F 3mm thick sheet glass ordinary quality n.exc 0.5sqm each pane complete. | | 9 | Sqm |
|---|
| 51 | 51 | S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to new steel window with nut bolt,fixed complete all as specified and directed. | | 13.5 | Sqm |
|---|
| 52 | 52 | S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to steel window with nut bolt,fixed in repair. | | 12 | sqm |
|---|
| 53 | 53 | S& F 3mm thick sheet glass ordinary quality n.exc 0.5sqm each pane add fixed in repairs. | | 5 | Sqm |
|---|
| 54 | 54 | S&F in repair 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane | | 1 | Sqm |
|---|
| 55 | 55 | S&F Steel ventilators with centre hung shutter including hinges, steel peg stay, complete | | 1.8 | Sqm |
|---|
| 56 | 56 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane | | 1.2 | Sqm |
|---|
| 57 | 57 | M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide, primer. | | 57.44 | Sqm |
|---|
| 58 | 58 | M & L for preparation of old steel surfaces exc 10 cm width or girth and applying one coats of synthetic enameled paint . | | 49.44 | Sqm |
|---|
| 59 | 59 | M/L for spot welding for repairing steel windows and ventilators hinges, brackets, steel handle, etc. all as sepcified and directed. | | 12 | Each Job |
|---|
| 60 | 60 | S&F in repairs powder coated aluminuium pipe 20 mm dia as in curtain rod fixed to brackets all as specified and directed.\nNote brakets shall be measured and paid separately. | | 75 | Rm |
|---|
| 61 | 61 | S & F in repairs powder coated aluminium brackets fancy type for curtain rods of 20mm dia ,all as specified and directed. | | 72 | Pair |
|---|
| 62 | 62 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth | | 90 | RM |
|---|
| 63 | 63 | Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required. | | 90 | RM |
|---|
| 64 | 64 | Ditto-all as above Item No. 63 but 20 mm dia pipe etc. | | 30 | RM |
|---|
| 65 | 65 | S & F 15 mm bore of pipe medium grade steel tubes, galvanised with & including all fittings and fixed complete to concealed walls and ceilings or laid in floors. | | 60 | RM |
|---|
| 66 | 66 | .---- do ---- all as per serial item No. 65 above but except steel tubing. | | 30 | RM |
|---|
| 67 | 67 | S & F 20 mm bore of pipe medium grade steel tubes, galvanised with & including all fittings and fixed complete to walls and ceilings or laid in floors. | | 30 | RM |
|---|
| 68 | 68 | S&F in repair rotational moulded polyethylene water storage tanks of capacity 500 ltr hoisted and fixed in position including 25mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed all as specified and directed. | | 5 | Each |
|---|
| 69 | 69 | S&F Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe and fixed in repair | | 6 | Each |
|---|
| 70 | 70 | S & F in repairs 20mm dia bore Gun metal, globe or gate valves with Iron wheel head, screwed both ends for Iron pipes and fixed. | | 6 | Each |
|---|
| 71 | 71 | S & F in repair angle stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm. | | 18 | Each |
|---|
| 72 | 72 | S & F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm but fancy type with long shank and cup ( concealed type) complete all as specified and directed by Engineer in Charge. | | 6 | Each |
|---|
| 73 | 73 | S&F in repairs 15mm dia fancy type Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed | | 30 | Each |
|---|
| 74 | 74 | S & F in repair,Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union | | 6 | Each |
|---|
| 75 | 75 | S & F PVC connections 15 mm size with PTMT nuts of 600 mm long | | 12 | Each |
|---|
| 76 | 76 | S&F in repairPVC (SWR) pipes 110mm dia ,single socketed in any length with rubber ring joints fixed to walls | | 18 | RM |
|---|
| 77 | 77 | S&F in repair,PVC (SWR) pipes 75 mm dia ,single socketed in any length with rubber ring joints fixed to walls | | 12 | RM |
|---|
| 78 | 78 | S&F in repair,PVC (SWR) bends any radius,for 110mm dia pipe. | | 3 | Each |
|---|
| 79 | 79 | S&F in repair,PVC (SWR) bends any radius, 75mm dia pipe. | | 3 | Each |
|---|
| 80 | 80 | S&F in repair,PVC (SWR) branch piece, single (single Y) equal or unequal,for 110mm dia pipe. | | 3 | Each |
|---|
| 81 | 81 | S&F in repair,PVC (SWR) branch piece, single (single Y) equal or unequal,for 75mm dia pipe. | | 3 | Each |
|---|
| 82 | 82 | S&Fin repair,PVC (SWR), junction single, (Single T) equal or unequal,for 110mm dia pipe. | | 3 | Each |
|---|
| 83 | 83 | S&F in repair,PVC (SWR), junction single, (Single T) equal or unequal,75mm dia pipe. | | 3 | Each |
|---|
| 84 | 84 | S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete complete including making good to floor. | | 6 | Each |
|---|
| 85 | 85 | S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. | | 6 | Each |
|---|
| 86 | 86 | S&F in repairs vitreous china wash basin white, flat back of size 580 x 450mm, excluding taps, waste chain & plug & porcelein stopper but including brackets, cutting for and pinning in ends of brackets all as directed. | | 6 | Each |
|---|
| 87 | 87 | S&F in repair pillar taps fancy type cast copper alloy with capestan heads chromiun plated screwed down high pressurewith hot &cold with long screwed shanks and fly nuts all as specified and directed. | | 6 | Each |
|---|
| 88 | 88 | S&F in repair ,stainless steel sink, 1mm thick, kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as directed. | | 6 | Each |
|---|
| 89 | 89 | S&F in repairs for 600mm x 450mm bevelled edge mirror of selected quality glass,mounted on 6mm thich AC Building board or commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers all as specified and directed | | 6 | Each |
|---|
| 90 | 90 | S&F plate rack made of stainless steel 1mm thick and overall size 915mm x915mm x 255mm, inlcuding taking down old /unsv complete all as specified and directed. | | 6 | Each |
|---|
| 91 | 91 | Removing of old water proofing treatment and cleaning the surface of slab, removing dust,foreign materials and removing the rubbish off the site to a distance n.exc 100m all as directedby Engr - in - Charge. | | 160 | Sqm |
|---|
| 92 | 92 | M & L for PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate ) on roof top for maintaining of slope coving,benching etc all as specified and directed. | | 1 | Cum |
|---|
| 93 | 93 | Rendering 10 mm thick on concrete surfaces of roof in cement plaster in 1:3 CM mixed with WPC @ 3% by weight of cement finishing even and smooth to receive water proofing treatment complete without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC shall be measured and paid seperately. | | 160 | Sqm |
|---|
| 94 | 94 | M & L for cleaning the plaster /concrete surfaces with wire brushes and applying water proofing treatment ,one coat of bituminious primer @ 0.25 kg per sqm and providing 3 mm APP modified water proofing Membrane weight 3.5 to 4.0 kg /sqm by torch application method including painting entire roof surfaces with one coats of bitumastic aluminous paint | | 160 | Sqm |
|---|
| 95 | 95 | M&L 75 mm dia cast iron floors trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), all as specified and directed. | | 18 | Each |
|---|
| 96 | 96 | M &L for water proofing treatment to RCC sunken slab (nexc 45 cm depth of sunken) as specified below directd by EIC. (a) Applying 15 mm thick plaster in cm 1:3, with WPC (b) Providing and fixing of 40-50mm dia GI pipe /spout pipe complete (c) creating fillet coving of 50x50 mm with polymer modified mortar (d) Apply first coat of two component modifeid polymer coating on hor and vert surface \n(e) Provn of glass fibre mess 2x2 mm immediately on above coating (f) Apply second coat of two component modifeid polymer coating after 72 hrs .\n(g) Disconnecting water tank and refixing in the same position after water proofing treatment ( plastered , PCC paid sep.) plan area shall be measured | | 11.92 | Sqm |
|---|
| 97 | 97 | Supply only integral water proofing compound | | 3.32 | Ltr |
|---|
| 98 | 98 | M & L for PCC 1:5:10 type E2 (uisng 40mm graded aggregate) as in filling, mass concrete for sunken floor , all as specified and directed. | | 2.19 | Cum |
|---|
| 99 | 99 | M & L for PCC 1:4:8 type D2 (uisng 40mm graded aggregate) as in filling, mass concrete for sunken floor , all as specified and directed. | | 0.6 | Cum |
|---|
| 100 | 100 | M&L for PCC 1:3:6 type C-2 , 75 mm thick as in plinth protection all as specified and directed | | 50.5 | Sqm |
|---|
| 101 | 101 | M & L for 75mm PCC 1:4:8 type D2 ( 40 mm graded aggregates) as ins sub base of floor. | | 24 | Sqm |
|---|
| 102 | 102 | M&L for Prepolished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment including 20mm thick screed bed in CM 1:6 all as specified and as directed. | | 9 | Sqm |
|---|
| 103 | 103 | Excavation over areas n.exc 1.5 m deep in soft/ loose soil and getting out all as specified and directed. | | 34 | Cum |
|---|
| 104 | 104 | Excavating in trenches n.exc 1.5 m wide, n.exc 1.5 m in depth & n.exc 10 Sqm on plan in soft/ loose soil and getting out all as specified and directed. | | 34 | Cum |
|---|
| 105 | 105 | All as per item No 102 but in hard dense soil | | 34 | Cum |
|---|
| 106 | 106 | All as per item No 102 but in soft / disintegrated rock | | 34 | Cum |
|---|
| 107 | 107 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed | | 34 | Cum |
|---|
| 108 | 108 | Removing excavated material n.exc. 50 m depositing where directed | | 24 | Cum |
|---|
| 109 | 109 | Returning , filling in including spreading levelling and well ramming in layers not exc 25 cm thick in each layer in soft/ hard soil . | | 78 | Cum |
|---|
| 110 | 110 | Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified. | | 34 | Cum |
|---|
| 111 | 111 | M&L for reinforced cement concrete M 25 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified | | 1 | Cum |
|---|
| 112 | 112 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified | | 7 | Sqm |
|---|
| 113 | 113 | M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified. | | 10 | Cum |
|---|
| 114 | 114 | M&L for cement concrete type B1 1:2:4 (20mm graded aggregate) 150 mm thick as in sub-floors, sub-bases, floors and paving, etc all as specified and directed | | 53 | Sqm |
|---|
| 115 | 115 | M&L for 80mm thick M40 grade interlocking coloured, rubber moulded, glossy finish paver tiles laid bedded pointed in neat coloured cement to match the surface, laid in floor with and incl 75mm thick crushed stone sand cushioning all as specified and directed | | 53 | Sqm |
|---|
| 116 | 116 | M&L for Rendering 10mm thick, on fair faces of brick work or concrete surfaces of walls in CM 1:6 all as specified and directed by EIC | | 12 | Sqm |
|---|
| 117 | 117 | S&F of TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips | | 60 | Kg |
|---|
| 118 | 118 | All as par item No 115 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders | | 15 | Kg |
|---|
| 119 | 119 | S&F Fe-410-W(Gde-E-250) roof trusses (framed), trussed, purlins, crane, gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. all as specified and directed. | | 1400 | Kg |
|---|
| 120 | 120 | S&F of Mild steel bolts, dia of neck in mm exc 12mm but not Exc 20mm purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long all as specified. | | 25 | Kg |
|---|
| 121 | 121 | S&F of Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W(Gde-E-250) all as specified. | | 35 | Kg |
|---|
| 122 | 122 | S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | | 60 | Sqm |
|---|
| 123 | 123 | S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | | 10 | Sqm |
|---|
| 124 | 124 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. | | 165 | Point |
|---|
| 125 | 125 | M & L for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheated FRLS cable 1100 Volts drawn in to and including PVC Casing Caping minimum size 25 mm including its accessories such as tee, bend ,elbow, socket and chisselling on wall complete and al so making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire including concealed MS terminal box ISI marked of suitable size / 3 mm thick hylam sheet on MS terminal box for housing switch ,socket,regulators etc complete for One light point controlled by one switch | | 74 | Point |
|---|
| 126 | 126 | All as per item No 123 above but for One Fan point controlled by one switch | | 18 | Point |
|---|
| 127 | 127 | All as per item No 123 above but for One 5 pin 6 Amps socket outlet on independent board. | | 25 | point |
|---|
| 128 | 128 | All as per item No 123 above but for One 5 pin 6 Amps socket outlet on same board. | | 30 | Point |
|---|
| 129 | 129 | All as per item No 123 above but for bell /buzzer point controlled by one push button on the same board with other switches or indipendent with cables 1.5 sqmm size. | | 6 | Point |
|---|
| 130 | 130 | All as per item No 123 above but for wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 v grade PVC insulated but unsheheted copper conductor FRLS cable 1100 volts grade and 1.5 sqmm PVC insulated but unsheathed FRLS cable as earthwire for 16 Amps power point on independent board complete all as specified and directed by Engr-in-charge. | | 12 | Point |
|---|
| 131 | 131 | S & F switch piano type 250 volts single pole one way 6 Amps all as specified and directed | | 153 | Each |
|---|
| 132 | 132 | S & F socket outlet 5 pin 6 Amps shuttered flush type all as specified and directed. | | 55 | Each |
|---|
| 133 | 133 | S & F switch piano type 250 volts single pole one way 16 Amps all as specified and directed. | | 12 | Each |
|---|
| 134 | 134 | S & F socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type all as specified and directed. | | 12 | Each |
|---|
| 135 | 135 | S & F PVC ceiling rose / Angle Holder / Batten Holder surface type three terminals type all as specified and directed. | | 92 | Each |
|---|
| 136 | 136 | S & F fan regulators electronic step type suitable for 1200/1400 mm sweep ceiling fans. | | 18 | Each |
|---|
| 137 | 137 | S & F Bell push flush type 5 Amps 230 V | | 6 | Each |
|---|
| 138 | 138 | S & F Bell Ding Dong AC 230 V single pole as directed by Engineer in charge | | 6 | Each |
|---|
| 139 | 139 | Taking down old unserviceable conventional fitting and S & F wall mounted high quality indoor batten LED tube light with PVC housing,LED tube rod 20 Watt with T-5 LED Batten type with integral electronic driver 20 W, colour temperature 6500 K (4') , operating lifte 50000 hrs, lumen 1800-3000, diffused connecting with three core flexible copper wire from connector to ceiling rose/ Angle Holder as per existing site requriement as directed by engineer in charge. \nMake: Bajaj / Philips / Crompton Greaves | | 34 | Each |
|---|
| 140 | 140 | Taking down old unserviceable conventional light fitting and S & F wall/ceiling mounted high quality indoor LED tube light 9 watt with PVC housing T-5 batten with intergrated electronic driver 09 watt, colour temperature 6500 K, operating life 30000 hrs, 900-1350 lumen (2'), diffused connecting with three core flexible coopper wire from connector to ceiling rose/ Angle Holder as per existing site requriement as directed by engineer in charge. \nMake: Bajaj / Philips / Crompton Greaves | | 41 | Each |
|---|
| 141 | 141 | S & F 30 w LED street light fitting with lens and IP 66 powder coated pressure die cast aluminium compact high power LED street light with heat rtesistant toughened glass with lens including entry mounting for 32/40 mm outer Dia pipe bracket including extendable/supported GI medium grade 32/40 mm bracket bend to shape fixed on wall/pole with suitable MS flat iron clamps 2 nos including grouting on wall /fixed on wall with nut and bolts and washers and painting with single coat of aluminium paint over a coat of primer complete all as specified and directed .\nMake Crompton Greaves Cat Pat No LSTS-30-CDL or equivalent in bajaj phillips | | 2 | Each |
|---|
| 142 | 142 | M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FR Cable of size 4 sqmm 1100 volt grade drawn into PVC casing capping of 32 mm including 1.5 sqmm. PVC multi standard copper conductor FR cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface. | | 240 | RM |
|---|
| 143 | 143 | S & F in repairs distribution board factory made TPN 4 way in, 415 Volt, Double door metal type suitable for fixing MCBs as out going and including TPN MCB 63 Amps as main incoming all as specified & directed. Make; Legrand / L&T / ABB. Note; Cost of MCBs will be measured and paid seperately. | | 1 | Each |
|---|
| 144 | 144 | S & F in repairs distribution board factory made SPN 8 way in, 240 Volt, Double door metal type suitable for fixing MCBs as out going and including SPN MCB 32 Amps as main incoming all as specified & directed. Make; Legrand / L&T / ABB. Note; Cost of MCBs will be measured and paid seperately. | | 6 | Each |
|---|
| 145 | 145 | S & F in repairs MCB TPN 63 Amps 'B' series 10 KA with two position DIN Rail clamp. Make; Legrand / L&T / ABB. | | 1 | Each |
|---|
| 146 | 146 | S & F in repairs MCB DP 32 Amps 'B' series 10 KA with two position DIN Rail clamp. Make; Legrand / L&T / ABB. | | 7 | Each |
|---|
| 147 | 147 | S & F in repairs MCB SP 5 to 30 Amps 'B' series 10 KA with two position DIN Rail clamp. Make; Legrand / L&T / ABB. | | 46 | Each |
|---|
| 148 | 148 | S&F PVC blank plate suitable for MCB DB | | 4 | Each |
|---|
| 149 | 149 | Taking down ceiling fan 1200/1400 mm & M&L for machine spray painting of ceiling fan of any make/sweep with white synthetic enameled paint after preparation of old surface by cleaning with soap/detergent and drying of white synthetic enameled paint including writing of MES No. with black synthetic enameled paint with existing pattern all as directed by Engr- in- charge | | 12 | Each |
|---|
| 150 | 150 | Painting and repairing of building panel board including one coat to red oxide and two coat of synthetic enamlled paint & necessary welding to hinges including replacement of connection wire 4 sq mm from TPN DB to existing electric meter lugs, cable glands and with New PVC Cable tray/ Box etc. necessary connection wire to meter all as directed by engineer-in-charge. | | 1 | Each |
|---|
| 151 | 151 | M & L in repairs for earthing complete with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 3.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical palte No 3 of SSR part-I, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and all as directed. \n(Note: Rate for achieving required depth by compressor machine/breaker if required is deemed included in item unit rate.) | | 2 | Each |
|---|
| 152 | 152 | M & L in repairs earth continuity conductor or main earthing lead fixed to ewall on batten or recess or chases or buried inground or drawn inconduit / pipe or fixed to poles or any other indicated suituation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire | | 10 | RM |
|---|
| 153 | 153 | Supply, laying and testing cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core, connection on existing nearby panel with crimped with suitable size of lugs, \n | | 200 | RM |
|---|
| 154 | 154 | All as par item No 151 above but of size 10 sq mm 2 core\nNote for item Nos 153 & 154: Earth work and cable protection shall be measured and paid separately. | | 200 | RM |
|---|
| 155 | 155 | Supply and fix LED Flood light 70 W IP 65 fitting mounting on 25 x 5 mm copper flat bar with all hardwares in including PCC foundation, light focus from ground to BMB tank and requiered electrical connections with suitabale size of copper wire all as specified and directed by Engr-in-Charge. Make: Wipro/Crompton/Havells | | 6 | Each |
|---|
| 156 | 156 | Supply and fix PVC junction box on security guard wall of size 380 x 225 x 140 mm, including TPN MCB 1 A, Astro mini time switch 110-240 VAC 1 phase-2W, 1 C/o, Base/DIN, Three phase aluminium bus bar with suitable size of MS clamps, for street light control mounted on pole with the provision of three phase cable entry and suitable size of glands for controlling 6 Nos of flood lights. | | 1 | Each |
|---|
| 157 | 157 | M&L for riddled earth for cushioning including spreading, levelling and hand punning to underground cable in trench all as specified and directed.\nNote : Punned thickness shall only be measured and paid. | | 8 | Cum |
|---|
| 158 | 158 | M&L for brick Class 'B' protection for Under ground cable all as specified and directed. | | 3304 | Cum |
|---|
