| 1 | 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | | | |
|---|
| 2 | 1.01 | In cement mortar | | 10 | cum |
|---|
| 3 | 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | | 50 | sqm |
|---|
| 4 | 3 | Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : | | | |
|---|
| 5 | 3.01 | Thickness above 40 mm up to 75 mm | | 20 | sqm |
|---|
| 6 | 4 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | | 20 | cum |
|---|
| 7 | 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : | | | |
|---|
| 8 | 5.01 | Cement mortar 1:6 (1 cement : 6 coarse sand) | | 15 | cum |
|---|
| 9 | 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. | | | |
|---|
| 10 | 6.01 | Cement mortar 1:4 (1 cement :4 coarse sand) | | 50 | sqm |
|---|
| 11 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | | | |
|---|
| 12 | 7.01 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | | 2 | cum |
|---|
| 13 | 8 | 15 mm cement plaster on rough side of single or half brick wall of mix: | | | |
|---|
| 14 | 8.01 | 1:6 (1 cement: 6 coarse sand) | | 100 | sqm |
|---|
| 15 | 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | | 100 | sqm |
|---|
| 16 | 10 | Finishing walls with textured exterior paint of required shade : | | | |
|---|
| 17 | 10.01 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | | 400 | sqm |
|---|
| 18 | 11 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : | | | |
|---|
| 19 | 11.01 | New work (two or more coats) over and including water thinnable priming coat with cement primer | | 500 | sqm |
|---|
| 20 | 12 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. | | | |
|---|
| 21 | 12.01 | Granite work | | 6 | metre |
|---|
| 22 | 13 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall | | | |
|---|
| 23 | 13.01 | screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : | | | |
|---|
| 24 | 13.02 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) | | 200 | sqm |
|---|
| 25 | 14 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. | | 50 | sqm |
|---|
| 26 | 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | | 70 | sqm |
|---|
| 27 | 16 | 12 mm cement plaster of mix : | | | |
|---|
| 28 | 16.01 | 1:6 (1 cement: 6 coarse sand) | | 100 | sqm |
|---|
| 29 | 17 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | | | |
|---|
| 30 | 17.01 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | | 21 | sqm |
|---|
| 31 | 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). | | | |
|---|
| 32 | 18.01 | Kiln seasoned and chemically treated hollock wood | | 0.5 | cum |
|---|
| 33 | 19 | Polishing on wood work with ready made wax polish of approved brand and manufacture : | | | |
|---|
| 34 | 19.01 | Old work | | 15 | sqm |
|---|
| 35 | 20 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | | | |
|---|
| 36 | 20.01 | Hot finished welded type tubes | | 200 | kg |
|---|
| 37 | 21 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : | | | |
|---|
| 38 | 21.01 | Udaipur green marble | | 40 | sqm |
|---|
| 39 | 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | | | |
|---|
| 40 | 22.01 | Two or more coats on new work | | 20 | sqm |
|---|
| 41 | 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | | | |
|---|
| 42 | 23.01 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) | | 1 | cum |
|---|
| 43 | 24 | Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. | | | |
|---|
| 44 | 24.01 | All kinds of soil | | 2 | each |
|---|
| 45 | 25 | Providing and Fixing polycorbonate coloured multiwalled 6mm thick roofing including necessary powder coating aluminium locking profile, PVC ruber gasket, weather proof sealing of joints with silicon coating with powder coating aluminium angle of suitable size where required shape & size, hoisting and fixing area frame work etc. all complete (MS frame work & posts etc. are to be paid for separetly wherever provided) as per direction of engineer-in-charge. | | 50 | sqm |
|---|
| 46 | 26 | Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick | | | |
|---|
| 47 | 26.01 | Granite of any colour and shade | | 20 | sqm |
|---|
| 48 | 27 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. | | | |
|---|
| 49 | 27.01 | 1.0 mm thick | | 42 | sqm |
|---|
| 50 | 28 | Providing and fixing Lead glass of size 1.2m x 1.2m complete as per direction of Engineer-in-charge. | | 1 | nos. |
|---|
| 51 | 29 | Providing and Fixing Lead lined window of size 1.2m x 1.2m complete as per direction of Engineer-in-charge. | | 2 | nos. |
|---|
| 52 | 30 | Providing and fixing of 2mm th. Lead sheet over the existing wooden frames for doors/windows as per detail including the wooden covering beading. | | 16 | mtr. |
|---|
| 53 | 31 | Providing and fixing composite wooden side hung laminated and lead lined door shutter made out of 30mm th. Solid cored commercial shutter with 2.0mm thick lead sheet nailed to the shutter and having 6mm thick commercial ply on the lead sheet with 6mm thick TW lipping all around. This door shutter to be finished with 1mm thick laminate on both sides as per the directives of Engineer-in-charge all complete with SS butt hinges 4 nos. with necessary screws. | | 7.14 | sqm |
|---|
