Construction Work Of 250 Seat Capacity Auditorium By Improvement And Upgrading Of Police Line Sammelan Kakshy At Race Course , Dehradun . , Race Course-Uttarakhand

TDR : 24395300

Tender Notice
Corrigendum Details
BOQ

Expired

Race Course , Uttarakhand

Tender Brief : Corrigendum : Construction Work Of 250 Seat Capacity Auditorium By Improvement And Upgrading Of Police Line Sammelan Kakshy At Race Course , Dehradun .

Document Fees
₹ 4720 /-

EMD
₹ 225000.0 /-

Tender Value
₹ 1.12 Crore /-

Submission Date
08-06-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	05-06-2020	Corrigendum for Date Extension	Date	08-06-2020

Name of Work: Construction work of 250 seat capacity Auditorium by improvement and upgrading of police line Sammelan Kakshy at Race Course, Dehradun.
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. As per D.S.R No. 2.8.1		129.663	Cum
2	2	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) As per D.S.R No. 15.2.1		52.34	Cum
3	3	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) As per D.S.R No. 4.1.8		73.51	Cum
4	4	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) As per D.S.R No. 5.1.2		33.1733	Cum
5	5	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) As per D.S.R No. 6.1.2		25.52	Cum
6	6	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. As per D.S.R No. 2.27		146.57	Cum
7	7	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) As per D.S.R No. 5.2.2		5.39	Cum
8	8	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) As per D.S.R No. 6.4.2		71.87	Cum
9	9	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) As per D.S.R No. 6.13.2		22.64	Sqm
10	10	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). As per D.S.R No. 5.3		12.88	Cum
11	11	Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. As per D.S.R No. 5.9.3		114.53	Sqm
12	12	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more. As per D.S.R No. 5.22.6		40.38	Qtl
13	13	Providing and laying 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand). As per D.S.R No. 13.1.1		48.88	Sqm
14	14	Providing and laying 12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand). As per D.S.R No. 13.1.2		374.26	Sqm
15	15	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size). As per D.S.R No. 4.1.4		0.72	Cum
16	16	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, includingcement slu rry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate. As per D.S.R No. 11.3.1		404.28	Sqm
17	17	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete. As per D.S.R No. 13.88		354.81	Sqm
18	18	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per D.S.R No. 13.80		244.34	Sqm
19	19	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer. As per D.S.R No. 13.41.1		240.79	Sqm
20	20	Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). As per D.S.R No. 13.46.1		755.06	Sqm
21	21	Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). As per D.S.R No. 13.50.1		50.36	Sqm
22	22	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work. As per D.S.R No. 13.60		41.97	Sqm
23	23	With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works. As per D.S.R No. 13.50.3		9.51	Sqm
24	24	Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre- reatment of the surface as directed by Engineer-in-charge:Profile B Fixing with adjustable lugs with split end tail to each jamb. As per D.S.R No. 10.14.1.1		63.4	meter
25	25	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. As per D.S.R No. 9.20.2		20.58	Sqm
26	26	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm. As per D.S.R No. 11.41.2		49.46	Sqm
27	27	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. As per D.S.R No. 8.31		91.48	Sqm
28	28	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. As per D.S.R No. 11.37		38.01	Sqm
29	29	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm. As per D.S.R No. 21.3.2		2.7	Sqm
30	30	Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. As per D.S.R No. 14.34		6	Nos
31	31	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. As per D.S.R No. 17.23		2	Nos.
32	32	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. As per D.S.R No. 17.2.1		4	Nos.
33	33	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. As per D.S.R No. 17.16A		6	Nos.
34	34	Providing and fixing brass bib cock of approved quality : 15 mm nominal bore. As per D.S.R No. 18.15.1		4	Nos.
35	35	Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore. As per D.S.R No. 18.46.1		10	Nos.
36	36	Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore. As per D.S.R No. 18.11.1		48	Rmt
37	37	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per D.S.R No. 8.48		1000	Ltrs
38	38	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. As per D.S.R No. 18.52.1		4	Nos
39	39	Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ .P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms. As per D.S.R No. 18.62.1		6	Nos
40	40	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore. As per D.S.R No. 18.18.1		2	Nos
41	41	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. As per D.S.R No. 17.1.1		2	Nos
42	42	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. As per D.S.R No. 17.7.2		6	Nos.
43	43	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm. As per D.S.R No. 17.32.4		6	Nos.
44	44	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. As per D.S.R No. 9.83		9	Nos
45	45	Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: As per D.S.R No. 9.95		64	Nos.
46	46	Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. As per D.S.R No. 9.76		8	Nos.
47	47	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm. As per D.S.R No. 9.97.5		16	Nos
48	48	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore. As per D.S.R No. 18.53.1		4	Nos
49	49	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. As per D.S.R No. 9.48.1		20	Kg
50	50	Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 12 mm mild steel U beading. As per D.S.R No. 9.51.2		2.7	Sqm
51	51	C.P. brass toilet paper holder of standard size. As per D.S.R No. 1889		6	Nos.
52	52	MT pillar cock. As per D.S.R No. 7406		6	Nos.
53	53	Vitreous china toilet paper holder of standard size. As per D.S.R No. 3749		4	Nos.
54	54	PTMT Soap Dish/Holder 138x102x75 mm. As per D.S.R No. 7509		4	Nos.
55	55	Fabric Wall Treatment:Providing & Fixing of Acoustical Fabric paneling with 12mm x 28mm UPVC Grippers fixed to 12mm thk ply strip to the GI Frame & the area between the GI frame will be filled with high insulation of 50mm thk 1000 gsm polyster wool The frame will fixed to the existing wall with necessary screw & fastners. (Fabric: Response Fabric).		840	Sqft
56	56	Laminate Paneling: Providing & fixing of 125mm wide laminate paneling on 12mm thk commercial ply base with 12mm groove fixed on GI Frame. The area between the GI frame will be filled with high insulation of 50mm thick 48kg density Rockwool . The frame will fixed to the existing wall with necessary screw & fastners. (Laminate : Green Lam)Make:		1800	Sft
57	57	COVE - Providing and fixing of wooden cove as per design & as per direction and as per approval of E/I.		940	Rft
58	58	Wooden accoustic panel - Providing and fixing of perforated / vertical wooden acoustic panel size 2'x4' made of pre laminated action tessa board fixed on GI frame. The area between the GI frame will be filled with high insulation of 50mm thick 48kg density Rockwool . The frame will fixed to the existing wall with necessary screw & fastners. as per approval of E/I.		1638	Sft
59	59	Stage Wooden Flooring :- Providing & fixing of 8mm laminate flooring as per direction of E/I. (Make Action Tessa) AC4.		960	Sqft
60	60	L Profile MAKE -Deftech. As per direction/approval of Engineer in charge.		69	Rft
61	61	Profile MAKE -Deftech. As per direction/approval of Engineer in charge.		7	Rft
62	62	Carpet- Providing and fixing of 5mm thick 100% Nylon 6level loop pvc backing carpet- 20 oz complete with 6mm foam. Make: Rockfone/Deftech /Auralex/Om Sai as per direction of E/I.		3000	Sqft
63	63	Auditorium Chair: Type: Multiplex Chair Side Stand: 3 mm iron stripe with 6 mm ply upholstered with Armrest (Handle). Leg: Chair leg will be fixed. Back Angle: 14 gauge. Moulded PU. foam density: Seat: 50kgs/m3; Seat Back: 50kgs/m3; Inner structure: Frame in Seat of approved quality and Iron Frame in Back . All the iron parts will be powder coated Upholstery fabric of Standard Quality.		240	Nos.
64	64	Auditorium Sofa - Providing and fixing of 2 seater sofa with frame in Marandi wood fully upholstered using foam of 40 density of featherite make and fabric upto 800/mtr.		12	per seat
65	65	Washroom Passage : Providing and fixing A framework of MS pipes 2\"x2\" covered with Coloured metro sheet .		50	sqft
66	66	Providing 50mm thick Ceiling Puff insulated panels made up of Polyurethane sandwhiched between ppgl metal sheet of thickness 0.5mm below the existing MS frame which will act as a false ceiling installed on TN suspenders at every 3 mtr.		4420	sqft
67	67	4.5\" thk wall to be created of 10'-0\" height in fibre cement board Repicon wall of Everest/Aerocon make installed on a GI frame.		75	sq.ft
68	68	WC -Wall mounted Rimless, Blind Installation Wall Hung WC, Code:SLS-WHT-963.N.S of Jaguar make.		3	Nos.
69	69	Providing & fixing of WC cubicles made of 12mm thick HPL panels along with the necessary hardware made of Nylon Polyamide and powder quoted Alumunium top rail , Post door channels, Hinges adaptors, gravity hinges , privacy thumbturn, coat hook, door knob, screws and wall plugs.		4	Nos.
70	70	Providing & fixing Curved shaped Urinal partition in 8mm thick HPL. as per direction of E/I.		2	Nos.
71	71	Providing & fixing of Armstrong armgyp grid ceiling made of 2x2 grid tiles suited for washrooms/wet areas mounted on Prelude 24mm channel. as per direction of E/I.		320	Sqft
72	72	Providing and fixing of Auditorium signange in 6mm thick ACP raised by 4\". as per direction of E/I.		15.9	Sqm

Also Visit

Tenders

Uttarakhand Tenders

Construction Tenders

Building Construction Tenders

Auditorium Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Work Of 250 Seat Capacity Auditorium By Improvement And Upgrading Of Police Line Sammelan Kakshy At Race Course , Dehradun . , Race Course-Uttarakhand

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Work Of 250 Seat Capacity Auditorium By Improvement And Upgrading Of Police Line Sammelan Kakshy At Race Course , Dehradun . , Race Course-Uttarakhand

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us