| 1 | 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : | | | |
|---|
| 2 | 1.01 | Cement mortar 1:6 (1 cement : 6 coarse sand) | | 2 | cum |
|---|
| 3 | 2 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | | 50 | sqm |
|---|
| 4 | 3 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | | 5 | metre |
|---|
| 5 | 4 | Providing and fixing to existing door frames. | | | |
|---|
| 6 | 4.01 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | | 2 | sqm |
|---|
| 7 | 5 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. | | 5 | sqm |
|---|
| 8 | 6 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. | | | |
|---|
| 9 | 6.01 | Two or more coats on new work | | 60 | sqm |
|---|
| 10 | 7 | Finishing walls with Acrylic Smooth exterior paint of required shade : | | | |
|---|
| 11 | 7.01 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | | 100 | sqm |
|---|
| 12 | 8 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | | 60 | sqm |
|---|
| 13 | 9 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | | 60 | sqm |
|---|
| 14 | 10 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | | | |
|---|
| 15 | 10.01 | In cement mortar | | 2 | cum |
|---|
| 16 | 11 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). | | | |
|---|
| 17 | 11.01 | Kiln seasoned and chemically treated hollock wood | | 0.05 | cum |
|---|
| 18 | 12 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : | | | |
|---|
| 19 | 12.01 | Of area 3 sq. metres and below | | 4 | each |
|---|
| 20 | 13 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : | | | |
|---|
| 21 | 13.01 | 125 mm | | 4 | each |
|---|
| 22 | 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: | | | |
|---|
| 23 | 14.01 | Cement mortar 1:6 (1 cement : 6 coarse sand) | | 1 | cum |
|---|
| 24 | 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | | | |
|---|
| 25 | 15.01 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | | 0.5 | cum |
|---|
| 26 | 15.02 | 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) | | 4 | cum |
|---|
| 27 | 16 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : | | | |
|---|
| 28 | 16.01 | 25 mm thick | | 40 | sqm |
|---|
| 29 | 17 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | | | |
|---|
| 30 | 17.01 | Hot finished welded type tubes | | 200 | kg |
|---|
| 31 | 18 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. | | | |
|---|
| 32 | 18.01 | 2 mm thick flat | | 50 | sqm |
|---|
| 33 | 19 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | | | |
|---|
| 34 | 19.01 | Two or more coats on new work | | 25 | sqm |
|---|
| 35 | 20 | 15 mm cement plaster on rough side of single or half brick wall of mix: | | | |
|---|
| 36 | 20.01 | 1:6 (1 cement: 6 coarse sand) | | 15 | sqm |
|---|
| 37 | 21 | Providing and fixing pre-polished precast concrete designer tiles 10mm thick extra heavy duty of approved brand and manufacturer (Ultra tile/omaxe or equivalent) of required shape & size over a bed of average thickness of 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand) laying and jointing with cement slurry including pointing the joints with ready mixed pointing material complete in all respect as per directions of Engineer-in-charge. | | 10 | sqm |
|---|
| 38 | 22 | Providing and fixing composite wooden side hung laminated and lead lined door shutter made out of 30mm th. Solid cored commercial shutter with 2.0mm thick lead sheet nailed to the shutter and having 6mm thick commercial ply on the lead sheet with 6mm thick TW lipping all around. This door shutter to be finished with 1mm thick laminate on both sides as per the directives of Engineer-in-charge all complete with SS butt hinges 4 nos. with necessary screws. | | 2.2 | sqm |
|---|
| 39 | 23 | Providing and fixing of 2mm th. Lead sheet over the existing wooden frames for doors/windows as per detail including the wooden covering beading. \n | | 5 | mtr. |
|---|
