Constn_Iti_Villagemannan_Ke, Tarn Taran-Punjab

TDR : 24368196

Tender Notice
Corrigendum Details
BOQ

Expired

Tarn Taran , Punjab

Tender Brief : Corrigendum : Constn_Iti_Villagemannan_Ke

Document Fees
₹ 30000 /-

EMD
₹ 1478140.0 /-

Tender Value
Refer document

Submission Date
09-06-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	21-05-2020	The time period of completion will be 6 Months	Other	09-06-2020

Name of Work : CONSTRUCTION OF ITI AT VILLAGE : MANAN KE, BLOCK : GANDIWIND, DISTRICT TARN TARAN (PUNJAB)
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	CIVIL WORKS (A-1)
2	2	Construction of Main Building Two storey
3	3	Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.		1544.03	cum
4	4	Providing and applying Anti Termite Treatment using pre constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 2 ) & using Chemical containing chloropyrifos systemic insecticide diluted to manufacturer's specifications (i) In foundation pits, by treating the bottom & sides up to height of 300mm by uniformly spraying solution @ 5 Litre / sqm (ii) In the refill earth on both sides of all built up walls @ 7.5 Litre / Running meter (width - 300 mm, depth - 450 mm) (iii) Before laying the floor, by uniformly sprinkling the top surface of the consolidated earth within the outer perimeter @ 5 Litre solution per sqm.		1235.03	ltr
5	5	Cement concrete 1:5:10 with 40 mm gauge stone ballast. using concrete mixing volumetric type		158.19	cum
6	6	Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.		503.93	Cum
7	7	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)		912.72	sqm
8	8	Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.
9	9	BEAMS
10	10	Ground Floor		95.44	Cum
11	11	First Floor		58.35	Cum
12	12	Extra rate for First Floor		58.35	Cum
13	13	Second Floor		2.64	Cum
14	14	Extra rate for Second Floor		2.64	Cum
15	15	SLAB
16	16	Ground Floor		311.62	Cum
17	17	First Floor		198.96	Cum
18	18	Extra rate for First Floor		198.96	Cum
19	19	Second Floor		4.7	Cum
20	20	Extra rate for Second Floor		4.7	Cum
21	21	DOOR LINTEL
22	22	Ground Floor		7.93	Cum
23	23	First Floor		4.93	Cum
24	24	Extra rate for First Floor		4.93	Cum
25	25	Second Floor		0.24	Cum
26	26	Extra rate for Second Floor		0.24	Cum
27	27	COLUMNS (Rect. & Square)
28	28	Ground Floor		88.78	Cum
29	29	First Floor		58.68	Cum
30	30	Extra rate for First Floor		58.68	Cum
31	31	Second Floor		1.92	Cum
32	32	Extra rate for Second Floor		1.92	Cum
33	33	SHELVES
34	34	Ground Floor		3.86	Cum
35	35	First Floor		0.14	Cum
36	36	Extra rate for First Floor		0.14	Cum
37	37	Centring and shuttering for columns (Square or rectangular or poly gonal in plain)
38	38	Ground Floor		1134	Sqm
39	39	First Floor		469.44	Sqm
40	40	Extra rate for First Floor		469.44	Sqm
41	41	Second Floor		15.36	Sqm
42	42	Extra rate for Second Floor		15.36	Sqm
43	43	Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
44	44	Ground Floor		2602.72	Sqm
45	45	First Floor		1642.58	Sqm
46	46	Extra rate for First Floor		1642.58	Sqm
47	47	Second Floor		38.78	Sqm
48	48	Extra rate for First Floor		38.78	Sqm
49	49	Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
50	50	Ground Floor		826.96	Sqm
51	51	First Floor		506.24	Sqm
52	52	Extra rate for First Floor		506.24	Sqm.
53	53	Second Floor		23.04	Sqm
54	54	Extra rate for Second Floor		23.04	Sqm.
55	55	Centring and shuttering for stair cases with sloping with soffits including risers and stringers.
56	56	Ground Floor		5.61	Sqm
57	57	Damp proof course 4 cm thick of cement concrete 1 : 2 : 4 with 2 coats of bitument 20/30 penetration at 1.65 kg per Sqm. laid hot and sanded.		14.48	sqm
58	58	First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.		325.64	Cum
59	59	First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level..
60	60	Ground Floor		277.03	Cum
61	61	First Floor		168.7	Cum
62	62	Extra rate for First Floor		168.7	Cum.
63	63	Second Floor		54.28	Cum
64	64	Extra rate for Second Floor		54.28	Cum.
65	65	Third Floor		2.15	Cum
66	66	Extra rate for Third Floor		2.15	Cum.
67	67	Providing and laying in super structure for first storey factory made with vibro-hydraulic compaction machine precast Hollow block of cement concrete setting in position with cement mortar 1:3 (1 cement:3 course sand ) including cost of hosting, centering and shuttering complete as per IS:2185 (Part-1): 2005.
68	68	Ground Floor		105.32	Cum
69	69	First Floor		103.12	Cum
70	70	Extra rate for First Floor		103.12	Cum.
71	71	115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1 :4 cement sand mortar in super structure.
72	72	Ground Floor		332.09	Sqm
73	73	First Floor		58.79	Sqm
74	74	Extra rate for First Floor		58.79	Sqm
75	75	12.5mm thick cement plaster 1:5.		2423.83	Sqm.
76	76	20 mm thick cement plaster 1:5 in two coats work.		2423.83	Sqm
77	77	12.5 mm thick cement plaster 1:4.		1296.48	Sqm.
78	78	20 mm thick cement plaster 1:4.		1296.48	Sqm
79	79	Extra rate for Smooth Surface of Ceiling.		2797.32	sqm
80	80	Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)		393.02	Rmt.
81	81	Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.		54	Nos.
82	82	Providing and fixing 110 mm dia SWR U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.		215	Nos.
83	83	Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. \nM.S. Holder bats clamps for 100mm i/d H.C.I. pipes		215	Nos.
84	84	Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.		54	Nos.
85	85	Providing and fixing in position gratings 150mm x 150mm for gully trap.\nPVC grating		54	Nos.
86	86	Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.		54	Nos.
87	87	Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 25mm mud plaster, 75 mm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot @ 1.65 Kg. per Sqm. on top of R.C.C slab including grouting with cement
88	88	First Floor		823.73	Sqm.
89	89	Extra rate for First Floor		823.73	Sqm.
90	90	Second Floor		1190.83	Sqm.
91	91	Extra rate for Second Floor		1190.83	Sqm.
92	92	Thrid Floor		25.93	Sqm.
93	93	Extra rate for Third Floor		25.93	Sqm.
94	94	Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.		411.92	Rmt
95	95	Earth filling with good quality earth obtained from out side the plinth including compensation of earth, loading, unloading, carriage from outside the peremises to site of work, spreading, laying watering compacting with rammer complete as per specifications.		2960.48	cum
96	96	Earth filling :--Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from foundation and taken only from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres		617.61	cum
97	97	Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)		2020.27	Sqm.
98	98	Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping (Using mechanical mixer for mixing of material).
99	99	First Floor		819.01	Sqm.
100	100	Extra rate for First Floor		819.01	Sqm.
101	101	Second Floor		23.25	Sqm.
102	102	Extra rate for Second Floor		23.25	Sqm.
103	103	Baroda green marble flooring 15mm to 20mm thick over 12.5mm thick base of Cement mortar 1:3 laid and jointed with white cement slurry with pigment to match the shade of marble including rubbing & Polishing.\nTiles Size 45 cm x 60 cm & above
104	104	Ground Floor		132.42	Sqm.
105	105	First Floor		16.52	Sqm.
106	106	Extra rate for First Floor		16.52	Sqm.
107	107	Kota stone tile flooring 20mm to 30 mm thick over 12.5mm thick base of cement mortar 1:3 (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing.
108	108	Ground Floor		524.55	sqm
109	109	First Floor		252.57	sqm
110	110	Extra rate for First Floor		252.57	Sqm.
111	111	Kotah stone tile 20mm thick in skirting, riser of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 Cement and 3 Sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing
112	112	Ground Floor		28.11	sqm
113	113	First Floor		14.9	sqm
114	114	Extra rate for First Floor		14.9	Sqm.
115	115	Providing and fixing Morwad marble strip 18mm to 20mm thick and 100mm wide in Kotah Stone Flooring over 12.50 mm thick base of cement mortar 1:3 jointed with cement slurry including cost of aditional mortar equivallent to the kotah stone thickness and colouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects.		850.7	rmt
116	116	Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with cement contents 350kg per cum and coarse and fine aggregates conforming to IS:383 mixed with concrete mixer using weigh batcher, laid in position over 125 micron thick polythene sheet, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, including provision of contraction and expansion joints as required, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications		138.2	Cum
117	117	Providing and laying vitrified floor tiles 600x600mm size premium quality, manufactured using Double Charge Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 fine sand) for new flooring laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per sqm of tile area in average 3mm thickness over existing base, including grouting the joints (Tiles to be laid with 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout). with cement based grout and matching pigments etc., complete (Design is homogenous throughout the tile body). \n
118	118	Ground Floor		357.99	Sqm.
119	119	First Floor		575.69	Sqm.
120	120	Extra rate for First Floor		575.69	Sqm.
121	121	Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
122	122	Ground Floor		4.23	Sqm.
123	123	Extra labour for projected nosing of stair case of any shape and design		144.7	rmt
124	124	Providing and Laying Out Door Precast Designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3(1 ordinary cement :3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
125	125	Ground Floor		138.64	Sqm.
126	126	Supply & Fixing of pressed steel frames (Chowkats) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section(standard design latest) including iron lugs (hold fasts) iron hinges, confirming to P.W.D. specifications including bolts for fixing stops, lock-notch provision for receiving tower bolts, Hydraulic spring and finished with one priming coat of approved quality, fixed in position, including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete.
127	127	Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.		290.77	Rmt
128	128	Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.		294.96	Rmt
129	129	Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitred and electrically flash-welded, with iron fittings incluidng necessary iron handles,hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire guage) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire guage and grill will be paid as per respective items)		1237.5	kg
130	130	Wire gauge fixed on steel windows of standard rolled steel section, with 3mm thick flat iron cover moulding of 12.5mm width, fixed with machine screws, complete in all respects.		19.16	Sqm
131	131	Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm thick above 0.40 sqm area.		69.62	Sqm
132	132	Extra for providing & fixing Steel Tube beading size 12mm x 12mm, 18 guage of approved shape and section with screw for fixing of glass panes in stead of glazing clips and metal slash putty in steel doors, windows & Ventilators complete in all respect		251.45	rmt
133	133	Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.		37.88	qtl
134	134	Extra for providing Polyster Powder Coating 60 to 70 micron any coloured specified to M.S Grills section of various sizes including carriage of material from market to workshop		3787.5	Kg
135	135	Supplying and fixing rolling shutters of approved make, made of 80mm x 1.25mm M.S. Laths, interlocked together through their entire length, and jointed together, at the end by end locks, mounted on specially designed pipe shaft, with brackets, side guides 27.5 cm long wire spring grade No. 2 and arrangement for inside and outside locking, with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening; where rolling shutter is to be fixed).		46.45	Sqm
136	136	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) :
137	137	For fixed portion & Chaukhat		1624.86	kg
138	138	For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required		1577.4	kg
139	139	Providing Polyster Powder coating 50 micron any coloured specrified to aluminium section of various sizes including carrriage of material from marktet to workshop.		3202.26	Kg
140	140	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
141	141	With float glass panes of 5.5 mm thickness.		234.57	sqm
142	142	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge.		83	nos
143	143	ACOUSTICAL SLATS FOR WALL PANELING \nSupply & installation of Slats made of pinewood E1 grade fiberboard, veneer/Melamine laminated finish, groove perforated slats L8-2 - (2mm grooves @ 8mm centers) / L16-2 - (2mm Slats@16mm pitch) / L32-2 - (2mm grooves @ 32mm centers) / L64-2 - (2mm grooves @ 64mm centers), backlined with black acoustical fleece, tongue-groove edge for a seamless look, FR grade, of size 128x2440x16mm thick having base density 800Kg/m3, weight 12Kgs/m2 installed by using GI strut system.\nThe GI strut system includes GI Cross channel (CC10) having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened horizontally at every 600mm centers. Aluminium core cross channel (CC18) having thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fixed perpendicular to the CC10 with the help of fasteners at every 400mm centers. Slats of size 128x 2440x16mm in then fixed perpendicular to CC18 with suitable edge & centre brackets. Contractor to provide expansion joints of 3mm at every 5mtrs bothways. Note:-Wooden packing of appropriate thickness to be used at rear of strut to bring finish inline with Subtex NRC finish.\nPanels shall be backlined with acoustical infill of Anutone Synth PF 10x25mm thick adhered to the wall using Stick 7 adhesive Complete in all respect to the entire satisfation of Engineer-in-charge./Drawing. \nTechnical Parameters\n• Core Variants - Pinewood E1 Fibreboard\n• Fire – Class 1 & P\n• Acoustics – NRC upto 0.75\n• Climate (OC RH) – 50, 70\n• Light reflectance – 75%\n• Green (RC %) – 25\n• Hygiene (VoC, Clean room) – Low, Class 1\n• Strength, Load capacity (Kg) - Ball-Impact		256.4	Sqm
144	144	Providing & fixing 30mm thick Factory Made solid Panel PVC Door shutter (Pannel thickness 5mm) Consisting of frame made out of M.S tubes of 19 guage thickness and size of 19mm x 19mm for styles & 15mm x 15mm for top & bottom rails. M.S frame shall have a coat of steel primers of approved make & manufacture. M.S frame shall be covered with 5mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panneling of 5mm thick PVC sheet to be fitted in the M.S Frame welded/Sealed to the styles & Rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive.an additional 5mm thick PVC strips of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive etc.complete as per manufacturer's specification, conforming to test criteria specified in IS:4020-1998,Drawings and to the entire satisfaction of engineer-in-charge.		19.51	Sqm
145	145	Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973,\nCommercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:-\n
146	146	35mm thick		150.54	Sqm
147	147	Wire gauge Hollock wood door shutter without springs housed in chowkhat.\n35mm thick		42.92	Sqm
148	148	Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)\nFor shutter area above 0.50 sqm		318.13	Sqm
149	149	Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :\n300mm x 16mm		64	Nos
150	150	Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect		18.29	Rmt.
151	151	Providing & fixing 16 gauge stainless steel pipe of top of various size railing of grade 304 duly fixed on ramp with the help of bolts grouted on floor with hand rail and newel post of 50mm dia Stainless steel pipe , Balusters of 40mm dia Stainless steel pipe complete in all respect as per specification and entire satisfaciton of Engineer-in-Charge. (Railing on Enterance Ramp Design as per guidelines issued for persons with disability)		44.35	rmt
152	152	Providing & fixing 16 gauge stainless steel pipe of various sizes railing of grade 304 duly fixed on side wall with the help of bolts fixed with hand rail, S.S square bar 25 x 25mm welded to S.S flat 50 x 5mm complete in all respect as per specification and entire satisfaciton of Engineer-in-Charge. (Railing along wall in Ramp for upper storey Design as per guidelines issued for persons with disability)		100.58	rmt
153	153	Providing and fixing of false ceiling at all heights of 600x600x15mm/600120015mm Mineral Fibre ceiling tiles RH-99 laid in grid system. The frame work comprise of made of GI 120 GSM coating with minimum 0.3mm thickness main runner spaced at 1200mm centre to centre securely fixed to the structural soffit by approved hangers at 1200mm maximum centres. Hangersa (GI wire of 4mm dia) to be fixed by approved roof plug, level adjusters and screw etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees (with double stiching) to be interlocked between main runners at 600mm centres to form 1200x600mm modules. Cut across tees longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angle secured to walls at 450mm maximum centres complete in all respects as per specifications.		210.65	sqm
154	154	Providing and Fixing of flase Ceiling at all heights of 600x600x0.50mm / 60012000.50mm Metal ceiling perforated tiles without Fleece Powder Coated of 60 to 70 microne type OREO GI Laid in grid system The frame work comprise of made of GI 120 GSM coating with minimum 0.3 mm thicness main runner spaced at 1200 mm centre ot center secruely fixed to the structural soffit by approved hangers at 1200mm maximum centres. Hangers (GI wire of 4mm dia) to be fixed by approved roof plug, level adjusters and screw etc. The last hanger at the end of each main runner should not be greater than 450mm from the ajacent wall. Flush fitting 1200mm long cross tees (with double stiching) to be interlocked between main runners at 600mm centres to form 1200x600mm modules. Cut across tees longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600 long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angle secured to walls at 450mm maximum centres. Wall height of Cross toe 24mmx26mmx32mm and Main Runner 24mmx38mmx32mm complete in all respects as per specifications.		76.1	sqm
155	155	Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
156	156	Foundation & Ground Floor		1180.79	qtl
157	157	First Floor		379.52	qtl
158	158	Extra rate for First Floor		379.52	qtl
159	159	Second Floor		11.78	qtl
160	160	Extra rate for Second Floor		11.78	qtl
161	161	Extra rate for using steel produced by primary producer such as SAIL/RINL/TATA/JINDAL complete in all respect as per the directions of Engineer-in-charge.		1572.09	Qtl.
162	162	Providing and applying plaster of paris (ISI marked) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge.		2510.57	sqm
163	163	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish		7440.62	Sqm
164	164	Applying priming coat with cement primer in all shade on newly plastered or concrete exterior sufrace		10237.9	Sqm
165	165	Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)		7644.98	Sqm
166	166	Applying priming coat with metal primer on new steel or iron work including preparation of surface. \nWith ordinary quality Paint		116.13	sqm
167	167	Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work With ordinary quality Paint		116.13	sqm
168	168	Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.		338.72	Sqm
169	169	Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.		548.72	Sqm
170	170	Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade with ordinary quality paint.		338.72	sqm
171	171	Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm		2592.96	Sqm
172	172	Providing & Fixing writing board Size 6'-00\" x 4'-00\" finished with 1 mm thick white sunmica having aluminium frame work complete as per specification & desired by Engineer-in-Charge.		8	Nos
173	173	Construction of Plinth protection complete as per drawing.
174	174	Earth work in exavation in foundations, trenches, etc. in all kinds of soil where pick jumper work is not involved and not exeeding 2.0 Mtr. depth and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed within a lead of 30 Mtr. complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.		30.5	Cum.
175	175	Cement Concrete 1:8:16 with 40mm guage stone aggregate using mechanical mixer.		12.2	Cum.
176	176	First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.		14.64	Cum.
177	177	Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)		120.15	Sqm.
178	178	Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).		144.18	Sqm.
179	179	12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.		96.12	Sqm.
180	180	Total A1:-		1	Sqm.
181	181	Outer Infrastructure (B-1)
182	182	Construction of Boundary Wall With Grill
183	183	Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.		189.68	Cum.
184	184	Cement Concrete 1:5:10 with 40mm gauge stone aggregate Using mechanical mixer.		51.32	Cum.
185	185	First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.		102.09	Cum
186	186	Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.		109.68	Cum
187	187	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)		1302.96	Sqm
188	188	Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.		63.12	Cum
189	189	Centring and shuttering for Columns ( Square or Rectangular or ply gonal in plain)		869.54	Sqm
190	190	Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels		335.14	Sqm
191	191	Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete		251.75	Qtl
192	192	Providing and laying in super structure for first storey factory made with vibro-hydraulic compaction machine precast Hollow block of cement concrete setting in position with cement mortar 1:3 (1 cement:3 course sand ) including cost of hosting, centering and shuttering complete as per IS:2185 (Part-1): 2005.		237.98	Cum
193	193	12.5 mm thick cement plaster 1:4.		792.61	Sqm.
194	194	Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.		260	Qtl
195	195	Iron grated doors, including pintle hinges and arrangements.		10.8	Qtl
196	196	Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish		792.61	sqm.
197	197	Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm		792.61	sqm.
198	198	Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface		503.15	Sqm
199	199	Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. \nWith ordinary quality paint		503.15	Sqm
200	200	Total B1 :-		1	S
201	201	(B-2)\nConstruction of Internal Concrete Roads, Pavements with Pavers & foot Path
202	202	Earth filling with good quality earth obtained from out side including compensation of earth, loading, unloading, carriage from outside the peremises to site of work, spreading, laying watering compacting with road roller complete as per specifications.		24914.9	Cum.
203	203	Cement Concrete 1:4:8 with stone ballast of size. 40 mm guage. using concrete mixing volumetric type		325.01	Cum
204	204	Providing and laying 60 mm thick cement concrete interlocking paver block of M- 35 grade machine made rubber moulded smooth finish by strong vibratory process or with vibro-hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Medium Traffic Areas such as City streets, small & medium market roads, low volume roads, utility cuts on arterial roads, etc.		842.47	sqm.
205	205	Providing and laying 60 mm thick cement concrete interlocking paver block of M- 35 grade machine made rubber moulded smooth finish by strong vibratory process or with vibro-hydraulic compaction machine and of approved size and design / shape laid in Dark fast and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Medium Traffic Areas such as City streets, small & medium market roads, low volume roads, utility cuts on arterial roads, etc.		561.65	sqm.
206	206	Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with cement contents 350kg per cum and coarse and fine aggregates conforming to IS:383 mixed with concrete mixer using weigh batcher, laid in position over 125 micron thick polythene sheet, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, including provision of contraction and expansion joints as required, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications		148.04	Cum
207	207	Plain cement concrete M-20 grade precast kerb 250mm high with bottom width 165mm and top width 115mm fixed in position including carriage to site of work complete as per technical clause 408 of MORT&H specifications		444.12	rmt.
208	208	Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)		648.21	sqm.
209	209	Providing and Laying Out Door Precast Designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3(1 ordinary cement :3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.		304.58	sqm.
210	210	Applying priming coat with cement primer in all shade on newly plastered or concrete exterior sufrace		199.85	sqm.
211	211	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. \nWith special quality paint		199.85	sqm.
212	212	Total B2 :-		1	sqm.
213	213	Total A+B1+B2		1	sqm.
214	214	Public Health Services
215	215	Sub Work-1 Internal Water Supply, Sewerage, Sanitation
216	216	Sub Head-1.1 Internal Sewerage System
217	217	Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge )including cutting, jointing, wastage, but excluding cost of lead jointing.\nType - B
218	218	110mm o/d SWR UPVC pipe line laid complete		118.87	mtr
219	219	75mm o/d SWR UPVC pipe line laid complete		173.73	mtr
220	220	Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
221	221	For 110mm i/d pipes
222	222	Bend Plain		26	Nos
223	223	Cowls		3	Nos
224	224	Collars		21	Nos
225	225	Single junction with door		4	Nos
226	226	For 75mm i/d pipes
227	227	Bend Plain		16	Nos
228	228	Cowls		3	Nos
229	229	Collars		20	Nos
230	230	Single junction with door		5	Nos
231	231	With 75mm i/d outlet deep seal at Ground Floor
232	232	With 75mm i/d outlet shallow seal at First Floor		38	Nos
233	233	Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting.
234	234	M.S. Holder bats clamps for 110mm i/d SWRUPVC pipes		9	Nos
235	235	M.S. Holder bats clamps for 90mm i/d SWRUPVC pipes		9	Nos
236	236	Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
237	237	100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm		8	Nos
238	238	Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
239	239	450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal		2	Nos
240	240	600mm x 900mm inside with 455mm x 455mm cover and frame light duty double seal		6	Nos
241	241	Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.
242	242	uPVC Pipe 6 Kgf/cm2\n50mm i/d		13.72	mtr
243	243	Total Sub Head-1:-		1	S
244	244	Sub Head-1.2 Internal Water Supply System
245	245	Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete.
246	246	15mm i/d		82	mtr
247	247	20mm i/d		244	mtr
248	248	25mm i/d		351	mtr
249	249	40mm i/d		168	mtr
250	250	Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. \nSize 75mm x 75mm
251	251	qty same as GI P 15mm i/d to 25 mm		677	mtr
252	252	Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required.
253	253	Through wall 11.43 cm thick		60	nos
254	254	Through wall 22.86 cm thick		60	nos
255	255	Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
256	256	15mm i/d G.I. Union		24	Each
257	257	20mm i/d G.I. Union		24	Each
258	258	25mm i/d G.I. Union		24	Each
259	259	32mm i/d G.I. Union		12	Each
260	260	40mm i/d G.I. Union		12	Each
261	261	Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.\n
262	262	25mm i/d Brass Ball valves		12	Each
263	263	40mm i/d Brass Ball valves		12	Each
264	264	Painting G.I. Pipes and Specials with synthetic enamel Paint in all shades as per I.S.I. specification on existing or new work, two coats paints including cleaning rubbing surface, etc.
265	265	15mm & 20mm i/d G.I. Pipe		326	mtr
266	266	25mm & 32mm i/d G.I. Pipe		351	mtr
267	267	40mm & 50mm i/d G.I. Pipe		168	mtr
268	268	Total Sub Head-2:-		1	S
269	269	Sub Head - 1.3 Sanitary Installation
270	270	Providing and fixing in position Chinaware Indian Orisa water closet size 580mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.		2	Nos
271	271	Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer in charge ) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer in charge.		12	Nos
272	272	Providing and fixing in position Chinaware wall hunged European type water closet with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. \nChinaware wall mounted E.W.C without cistern including seat cover complete in all respect.		1	Nos
273	273	Providing and fixing in position Metropole flush valve 32mm size dual flow (Concealed body) with exposed shut off provision and round plate complete in all respect.		1	Nos
274	274	Providing and fixing jet spray with 2'-6\" long PVC pipe.With PTMT nut		13	Nos
275	275	Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.		13	Nos
276	276	Providing and fixing in position vitreous Chinaware white large flat back or angular lipped front urinal 610 mm high of approved make (to the approval of the Engineer-in-charge) (610 mm x 410 mm x 380mm) consisting of C.P. waste 32 mm dia and C.P. brass spreader, complete.		15	Nos
277	277	Providing and fixing partition for different type of urinals.\n15 to 20 mm thick Dungri marble partition \nsize 375mm x 750mm		15	Nos
278	278	Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap complete in all respect.
279	279	Size 49 cm dia (above counter round)		16	Nos
280	280	Size 550 mm x 400 mm		3	Nos
281	281	Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.		16	Nos
282	282	Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.		3	Nos
283	283	Providing and fixing in position best quality stainless steel sinks with complete fitting. \n
284	284	Size 600 mm x 450 mm x 225 mm (Net size excluding flat edge)		1	Nos
285	285	Providing & fixing in position best Indian make PVC flexible tube connection.\nPVC tube connection of size 15 mm x 375 mm with PTMT nut		56	nos
286	286	Providing and fixing PVC waste pipe 32mm complete in all respect.		33	Nos
287	287	Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.		10	Nos
288	288	Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.\n
289	289	C.P. brass towel Rails size 15mm dia 600mm long		2	Nos
290	290	C.P brass towel ring		8	Nos
291	291	Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
292	292	C.P. brass Bib cock long nose/ long body without flange		11	Nos
293	293	C.P Brass bib cock without flange		15	Nos
294	294	Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-in-charge).
295	295	C.P.brass 15mm Angle valve		56	Nos
296	296	C.P.brass 15mm Concealed stop cock with flange		13	Nos
297	297	Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.		95	each
298	298	Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.		95	each
299	299	Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (Size 600mm x 450mm)		19	Nos
300	300	Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.\nC.P. Brass Accessories:
301	301	C.P. brass toilet paper holder		13	Nos
302	302	Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.\nC.P. Brass khunti with 3 pegs		13	Nos
303	303	Providing and fixing in position vitreous Chinaware white channel of approved make (to the approval of Engineer-in-charge) of size 600 mmx100mm including laying and fixing in cement concrete 1:2:4 complete in all respect.		8	Nos
304	304	Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. \nDouble Layer Tanks		11000	ltr
305	305	Providing and fixing in position automatic brass Ball Cock in tanks.Brass Ball Cock with rod and Plastic Ball \n
306	306	Brass Ball Cock with rod and Plastic Ball \n32mm i/d		4	Nos
307	307	Brass Ball Cock with rod and Plastic Ball \n25mm i/d		4	Nos
308	308	Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
309	309	G.I. tank nipple 25mm i/d		8	Nos
310	310	G.I. tank nipple 40mm i/d (for flush valve)		8	Nos
311	311	Construction of Plateform complete as per specification & as desired by Enginer-in-charge
312	312	For 2000 ltr Water Tank		4	Nos
313	313	For 500 & 1000 ltr Water Tank		4	Nos
314	314	Providing and fixing in position Grab Bar vertical swing white epoxy coated model WAC-WHT-BG0800 make Jaguar or any equivalent approved make (to the approval of the Engineer-in-charge) fixed in to wall with nylon fastener, brass screws along EWC complete in all respect.		2	Nos
315	315	Providing and fixing in position Grab Bar 842 mm long white epoxy coated vertical model WAC-WHT-BR0750 make Jaguar or any equivalent approved make (to the approval of the Engineer-in-charge) fixed in to wall with nylon fastener, brass screws along EWC/WB complete in all respect.		2	Nos
316	316	Providing and fixing in position Grab Bar 2400 mm long white epoxy coated make Jaguar or any equivalent approved make (to the approval of the Engineer-in-charge) fixed in to wall with nylon fastener, brass screws infront and around WB complete in all respect.		2	Nos
317	317	Total Sub Head-3:-		1	S
318	318	Sub Head-1.4 Flooring and Wall Tile
319	319	Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material) including carrage
320	320	Ground Floor		81.75	sqm
321	321	Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping. Using machanical mixer for mixing of material includirng carrage
322	322	First Floor		30.58	sqm
323	323	Extra rate for First Floor		30.58	sqm
324	324	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.		30.58	sqm
325	325	Kota stone tile flooring 20mm to 30 mm thick over 12.5mm thick base of cement mortar 1:3 (1 cement, 3 Sand) laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing.
326	326	Ground Floor		81.75	sqm
327	327	First Floor		30.58	sqm
328	328	Extra Rate for First Floor		30.58	sqm
329	329	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 300 x 300mm mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
330	330	Ground Floor		242.4	sqm
331	331	First Floor		94.05	sqm
332	332	Extra Rate for First Floor		94.05	sqm
333	333	Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
334	334	Ground Floor		6.41	sqm
335	335	First Floor		1.86	sqm
336	336	Extra Rate for First Floor		1.86	sqm
337	337	Extra labour for projected nosing of stair case of any shape and design		5.62	sqm
338	338	Total Sub Head-4:-		1	SS
339	339	Sub Head -1.5 Drinking Water Coller & Air Conditions
340	340	Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 60 120 G, cooling capacity Ltrs/hr. 60, storage type capacity 120 Ltrs. Including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make...USHA/ Voltas – or its equivalent.		2	nos
341	341	Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 40 80 G, cooling capacity Ltrs/hr. 40, storage type capacity 80 Ltrs. including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make...USHA / Blue Star / Bajaj – or its equivalent.		2	Nos
342	342	Supply & Erection of automatic voltage stabilizer for storage type water cooler, Wall mounted, Heavy duty, copper wounded with volt meter etc. along with 3 core cord of suitable length and 3 pin power shoe including erection, connection & testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site. Make... V – Guard or its equivalent.		4	Each
343	343	Supply & installation of RO Ultra Violet Filter and Censor system, capacity 120 ltr. Per hour, 100% chemical free, including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make... Aquasure – or its equivalent.		4	Nos
344	344	Providing & Installing & Erection split type wall mounted air conditioner capacity 1.5 tonne 5 Star Make:- Carrier, Hitachi, Voltas, Blue Star, Daikin or equilant with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects		1	Each
345	345	Providing & Installing & Erection split type wall mounted air conditioner capacity 2.0 tonne 5 Star Make:- Carrier, Hitachi, Voltas, Blue Star, Daikin or equilant with 4.00 KVA voltage stablizer, MCB arrangement for installing OD units on terrace including inlet and outlet copper tubes with proper insulation drainage arrangement cable link between ID unit and OD units stand for OD unit and connection of concealing of Copper pipes and drainage pipe within building and installing charges complete in all respects		8	Each
346	346	Providing laying hard soft copper concealing of copper pipes of various dia as per requirement and wall thickness 0.8mm, insulated, 4mm electric wire sheathed 3 core double insulated / taping laying in chase cutting of wall and repairing the same within the building and installing charges complete in all respects.		90	mtr
347	347	Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.\nuPVC Pipe 10 Kgf/cm2\n25mm i/d		90	mtr
348	348	Total Sub Head-5:-		1	S
349	349	Total of Sub Work-1		1	S
350	350	Sub Work-2
351	351	Sub Head-2-Estate Water Supply
352	352	Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.
353	353	Earth work upto 1.5 m. Depth \nAll classes of soil except rocky		137.32	cum
354	354	Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage.\nD.I. Pipe as per IS 8329 DI-K7
355	355	D.I. Pipe as per IS 8329 DI-K7\n80mm i/d pipe lines laid complete		132.96	Mtr.
356	356	Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.
357	357	D.I. specials upto 300mm i/d		57.79	kg
358	358	Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).\nClass PN-1 as per ISI
359	359	80mm i/d Sluice Valves flanged		3	Nos
360	360	Providing, fixing and jointing Cast Iron surface box for Sluice valve, Air valve, Fire hydrant etc. including all carriages complete.		9	Kg
361	361	Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.
362	362	Size 0.6 m. x 0.6 m.		3	Nos
363	363	Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class,premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
364	364	50mm i/d		248.48	mtr
365	365	Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.
366	366	50mm i/d G.I. Union		8	nos
367	367	Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.
368	368	50mm i/d Gun Metal peet valve heavy pattern.		8	Nos
369	369	Providing GM ferrule as per IS:2692 drilling and tapping cast iron pipe lines of all diametres and screwing in Ferrule and connections complete in all respect.\n25mm i/d Ferrule medium		1	nos
370	370	Boring with casing pipe for tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested, equipment as required such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect.
371	371	Boring with 200mm id Housing Pipe		150	MTR
372	372	Supplying, lowering of MS Pipe as per IS:4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore.
373	373	150mm nominal diameter (weight 21.6 kg per metre) 5.4 mm thickness		131	Mtr
374	374	Supply, fixing & lowering of stainless steel cage type wire wound screen as per IS:8110-2000 or latest ISI makred, Duly welded with suitable grade S.S Welding electrode to lower the strainer into tubewell bore.
375	375	150mm internal diameter (slot size 0.15mm) 5.00 mm thickness		15	Mtr
376	376	Supplying, fixing and lowering of stainless steel socket as per IS 8110-2000 or latest, ISI makred duly welded with suitable grade SS welding electrode to lower the strainer into tubewell bore complete in all respects.
377	377	150mm internal diameter		6	nos
378	378	supplying, lowering and fixing of special MS sockets to connect S.S. containter to MS pipe duly welded with suitable grade welding electrode complete in all respects.\n150mm internal diameter		4	No
379	379	Supplying at site wooden box of suitable size with lid and locking arrangement for preserving strata sample received from the bore		1	No
380	380	Collection ofwater sample from different strata and testing of sample from aproval laboratory (Physical & Chemical Analysis)		3	each
381	381	Supplying and fixing well cap having threads to fix on housing pipe complete in all respect 200mm id.		1	No
382	382	Supply & fixing of ball plug of M.S pipe complete with inverted U-hook attached to the bottom plug Complete in all respects.\n150mm internal diameter (weight 21.6 kg per metre) 5.4 mm thickness		4	Mtr
383	383	Supplying and fixing mild steel clamps of 150mm x 12mm made out of MS Flat (1.52 mtr long suitable to fit the housing pipe including the cost of Nut or bolt of suitable size complete in all respects		1	No
384	384	Development and stabilizing of the Tubewell with Air Compressor required capacity as directed by the Engineer-in-charge including the cost of tools and appliances and consumable to the satisfaction of Engineer-in-charge.
385	385	With air compressor of size 300 cfm 250 PSI		10	hrs
386	386	Development and stabilizing of the Tubewell with Air Compressor and submersible pumping set of required capacity as directed by the Engineer-in-charge including the cost of tools and appliances and consumable to the satisfaction of Engineer-in-charge.		4	hrs
387	387	Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.)		1	each
388	388	Providing & Installing industrial type domestic RO		1	each
389	389	Providing & Installing Testing & commissioning of One No Electrically driven submersible pumping set 5 BHP of reputed Make capable of delivering along with elctric panel board consisting of elcetric appliances such as automatic star Delta push button or oil lmmersed starter, Main switch, VM ampere Meter, ELCB, shunt capacitor, single phase preventer, indicating Lamps Kit-Kat etc including M.S Column pipe of suitable size of 50mm = 50mtr (in 3 mtr lengths each with flanges, screwed and welded on both sides) rubber gasket, nuts and bolts submersible cable (reputated make) complete in all respect as per standard specifications.		1	each
390	390	Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class,premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.
391	391	50mm i/d		60	mtr
392	392	Providing & Installation of Automatic on/off controller make Boparai or its. Equivalent including cost of required length of cable up to main board.		1	job
393	393	Total Sub Work-2		1	S
394	394	Sub Head-3 Estate Sewerage including Septik tank & sockage pit
395	395	Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.
396	396	110 mm i/d pipes		24	mtr.
397	397	160 mm o/d pipes		48	mtr.
398	398	For Sewer Line as per Detail attached		163.8	mtr.
399	399	Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects.
400	400	For depth exceeding 3.0 m but not exceeding 4.5 m B.G.L.\nFor all classes of soil except rocky		319.85	cum
401	401	Sand Fillling around UPVC Pipe		8.65	cum
402	402	Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 63.464 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.
403	403	Inside size75x120cm and 120 cm deep		16	nos
404	404	Extra payable for every 0.30 m additional depth of manhole chamber in item 29.84 upto 1.80 m increase in depth.		5	nos
405	405	Construction of Septic Tank size 6.00 Mtr x 4 Mtr. Working depth 2.70 mtr and medium duty man hole cover complete as per drawing / specification and to the entire satisfaction of Engineer-in-charge. (Note :- Payment will be made as per CSR Based Rates Plus/Minus Quoted rates).		1	nos
406	406	Making soak pit 2.5 m Diametre 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm Diametre, 1.8 m long complete as per standard design.\nWith F.P.S. bricks		2	nos
407	407	Total 3:-		1	S
408	408	Sub Head-4 Roof Top Rain water Harvesting System
409	409	Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.
410	410	200mm o/d pipe of 4 Kgf. / sqcm		285.25	mtr.
411	411	160mm o/d pipe of 4 Kgf. / sqcm		342	mtr.
412	412	Excavation in trenches with straight or open cutting in a street, lanes or in a open area with 3D/JCB or excavator including manually dressing bed, trimming sides & slide slope for sewer & manhole to full depth as shown in drawing, including, dressing to correct sections and dewatering, provision for diversion for traffic,protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching etc. fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level removal of surplus spoils from the site of works upto chain (15 m), complete in all respects.
413	413	For depths not exceeding 3.0 metre B.G.L.\nFor all classes of soil except rocky		465.13	cum
414	414	Construction of Haudi internal size 0.90mtr x 0.90mtr & 0.90mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x600 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge		26	nos
415	415	Construction of Haudi internal size 0.45mtr x 0.45mtr & 0.45mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x450 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge		57	nos
416	416	No. of Haudi @ 5mtr. C/c Distance of Rain water Pipe line
417	417	Construction of Rain water harvesting system consisting of drilling bore 500mm dia depth as per drawing, supplying and lowering pvc perforated housing pipe 200 mm dia 50 mtr depth as per drawing sorrunded with filtermedia , stainer PVC medium 200mm i/d 1 mtr duly plugged from top with bail plug, fixing MS clamp, MS socket, Well size 5.00 mtr internal dia, 5mtr deep constructed with BB in 1:5 cement sand mortar,plastered from inside, RCC slab, filtered media in 3 Layers, 1Nos RCC Man hole cover conneted with collecting chamber size 1mtr x 1mtr x 1.20 mtr deep providing and fixing MS grating and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge .		2	No
418	418	Total 4:-		1	S
419	419	Fire Fighting Arrangements
420	420	Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.\n4.5kg capacity		8	Nos
421	421	Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.\n6kg Capacity		8	Nos
422	422	Total 5:-		1	S
423	423	Total of Sub Work (1+2+3+4+5) :-		1	S
424	424	Electrical Services
425	425	Providing Internal Electrical Installations
426	426	RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, PVC, fire retardant conduit pipe 20mm/25mm dia. ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp./16/20Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches/sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) PVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:- Make :- PVC Pipe = Anchor, Polycab, Norpack, Adarh Plast, Diplast. PVC Copper Wires = Bonton,Polycab, Tamra, Gemscab, KEI, Grandlay, Ecko, Ultracab, RR kabel, Rallison, Havell's, L&T, Batra Henlay, V-Guard, CMI, Great White Securex,HPL, Goldmedal.\nAccessories:-North-West(Nova), Havell's (Crab Tree), Legrand (Myrius), Hager\n
427	427	Wiring fan point with sheet metal fan box (shape hexagonal) in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts.		171	Each
428	428	Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.		347	Each
429	429	Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade.		74	Each
430	430	Wiring 3 Pin 6 Amp. Plug control comprising wall socket (shuttered) and switch including bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade complete.		136	Each
431	431	Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch.		35	Each
432	432	Wiring call-bell point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with bell push and electronic buzzer 230 volts AC (including the cost of bell push, electronic buzzer & powder coated concealed metal box for electronic buzzer).		4	Each
433	433	Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with double control switches.		2	Each
434	434	Wiring TV sockets and Telephone socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules, for having TV sockets, Telephone sockets RJ11 & RJ45 (one module) etc., and covered with Frame Plate etc., & including the cost of required number of modular TV sockets, Telephone sockets RJ11 & RJ45 (one module) and other petty material etc. including the cost of cutting and filling up of chases:-\nWiring Telephone socket point RJ11 (one module)		11	Each
435	435	Wiring Telephone socket point RJ45 (one module)		39	Each
436	436	PVC INSULATED SINGLE CORE FRCOPPER CONDUCTOR CABLE:Supply and erection of PVC insulated single core FRcopper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing. Make:-Bonton,Polycab, Tamra, Gemscab, KEI, Grandlay, Ecko, Ultracab, RR kabel, Rallison, Havell's, L&T, Batra Henlay, V-Guard, CMI, Great White Securex,HPL, Goldmedal..
437	437	PVC insulated copper conductor single core FR cable (ISI marked) overall 1sq.mm, 1100volts grade		600	Mtr.
438	438	PVC insulated copper conductor single core FR cable (ISI marked) overall 2.5 sq.mm, 1100volts grade		500	Mtr.
439	439	PVC insulated copper conductor single core FR cable (ISI marked) overall 4 sq.mm, 1100volts grade		3500	Mtr.
440	440	PVC insulated copper conductor single core FR cable (ISI marked) overall 10 sq.mm, 1100volts grade		1000	Mtr.
441	441	PVC insulated copper conductor single core FR cable (ISI marked) overall 16 sq.mm, 1100volts grade		850	Mtr.
442	442	PVC insulated copper conductor single core FR cable (ISI marked) overall 25 sq.mm, 1100volts grade		650	Mtr.
443	443	XLPE/ PVC INSULATED UN-ARMOURED CABLES (LOOSE):\nSupply & laying of aluminium conductor XLPE/ P.V.C. insulated un-armoured and served cable to be laid loose in the existing trench or pipe as per PWD General Specidications 2010:-\nMake :- Polycab, KEI, Ecko, RR kabel, Rallison, Havell's.
444	444	XLPE/ PVC insulated PVC sheathed aluminium conductor unarmoured cable working voltage 1100volts grade 150sq.mm (3 ½ Core)		200	mtr.
445	445	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:\nSupply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications 2010:-\nMake:- Anchor, Polycab, Norpack, Adarh Plast, Diplast.
446	446	Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed		900	Mtr.
447	447	Heavy gauge PVC conduit pipe 40mm dia. (ISI marked) Flushed		200	Mtr.
448	448	PVC flexible pipe 40mm dia.		300	Mtr.
449	449	HEAVY GUAGE WELDED CONDUIT PIPES:\nSupply & erection of pipe for wiring purposes including bends, inspection boxes etc., where necessary including painting as per PWD General Specifications :-
450	450	Supply and erection of 20mm dia. heavy gauge welded conduit pipe (1.60mm thick) suspension rod for ceiling fan complete in all respect as desired by the Engineer-in-charge.		550	Mtr.
451	451	COPPER EARTHING:
452	452	Earthing of Sheet metal/ iron clad switches and metallic cases etc., with 20 mm x 3 mm thick electrolytic copper tape rivetted (with 10 nos. copper rivets) to 30 cm x 120 cm x 3 mm thick tinned copper plate (made cylindrical) burried 10 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper tape on wall and in floor etc., up to 13 metre in length (including bore length). G.I. pipe 20mm dia. (A-class) should be laid in the hole of excavation from bore surface level to 1 feet below ground level and having wire mesh funnel fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm around the hole of excavation.		8	Each
453	453	Earthing of Sheet metal/ iron clad switches and metallic cases etc., with 8 SWG (4mm dia.) electrolytic copper wire thimbled (with 1 nos. copper thimble) to 30 cm x 60 cm x 3 mm thick tinned copper plate (made cylindrical) burried 10 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) on wall and in floor etc., up to 13 metre in length (including bore length). G.I. pipe 20mm dia. (A-class) should be laid in the hole of excavation from bore surface level to 1 feet below ground level and having wire mesh funnel fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm around the hole of excavation.		6	nos
454	454	Supply and Erection of 20mm x 3mm thick copper tape (As additional length).		80	Each
455	455	Supply and Erection of 8 SWG 4mm dia copper wire run through 20mm dia. GI pipe (A-Class) (As additional length).		500	mtr
456	456	MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:\nSupply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs. \nGROUP-A: (Siemens (Beta Guard), Legrand (Lexic) & Schneider (Neo Break), L&T (Exora,Hager)
457	457	Miniature circuit breaker single pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply		156	Each
458	458	Miniature circuit breaker four pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply		18	Each
459	459	Miniature circuit breaker four pole 40amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply		9	Each
460	460	Miniature circuit breaker four pole 50,63amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply		20	Each
461	461	Miniature circuit breaker triple pole 40amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply		18	Each
462	462	Miniature circuit breaker triple pole 50,63amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply		20	Each
463	463	Miniature circuit breaker double pole 6 to 32 amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply		27	Each
464	464	SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:\nSupply and erection of sheet metal double door distribution boards of suitable size and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles and bonding to existing earth etc.\n
465	465	GROUP-A: (Siemens (Beta Guard/Minigard), Legrand (Ekinoxe) & Schneider (Neo Break), L&T (EXORA), HAGER
466	466	Sheet metal double door S.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating MCB's/ RCBO/ RCCB's, 4 way each		27	Each
467	467	Sheet metal double door T.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 4 way each		8	Each
468	468	Sheet metal double door T.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 6 way each		3	Each
469	469	Sheet metal double door T.P. & N. (vertical design) distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 4 way each		3	Each
470	470	MOULDED CASE CIRCUIT BREAKERS:\nSupply and erection of Moulded Case Circuit Breaker (Panel mounting Cubicle type) in the existing Cubical Panel (conforms to IEC:60947-II) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD General Specifications (Electrical Works) complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with sutiable size of Thimbles etc.\nMCCB (Fixed Type Thermal and Magnetic Protection Make: L&T, ABB (T-MAX), Schneider (CVS), Seimens(3VT1/3VL)):Hager
471	471	100amp. 415 volts breaking capacity =25kA four pole fixed type thermal and magnetic setting MCCB unit		4	Each
472	472	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:\nSupply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation (making necessary trench), placing the pipe in position and back filling with excavated soil etc. of the required size.\nMake :-TeleRex,Gemni,CPE,Dura Line
473	473	Double walled corrugated (DWC) HDPE pipe 50/38 mm (outer/ inner dia.)		500	mtr
474	474	Double walled corrugated (DWC) HDPE pipe120/103.5mm (outer/ inner dia.)		180	mtr
475	475	Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no ATPB/20/GL Dated 30/11/2017. Make: Jaquar LGLZ01X020XC / Philips BN02IC LED20S PSU CW GR/ Havells ENDURALINEARNEOBS20WLED830SPCWH, Crompton:-LDL-20-CDL,WIPPRO:-LL20-221-XXX-65 ALI, C&S:-LTTB4F20WLED/W		53	Each
476	476	Supply and erection of LED batten 40watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no ATPB/20/GL Dated 30/11/2017. Make:- WIPRRO:- LL24-541-XXX-57-CD,BAJAJ Cat No. BCLAB40W ,JAQUAR CAT NO. LGLZ01X040XC, PHILLIPS Cat no:-BN108C LED 40 S PSU CDL WH , CROMPTON:-LDL-40-CDL,C&S:-LTTB4F40WLED /W,HAVELLS:-STOUTPLUS1200BS40WLED840SPCWH		166	Each
477	477	Supply and erection of Retrofit LED Batten box of CRCA sheet 2*20watt (including LED driver) & led tubelight with High quality extruded aluminium heat sink with efficacy of LED fixture more than 100 Lumens per watt,Fitting glass of Industrial grade polycarbonate cover, THD< 10%, CRI>70 complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by HON. Technical Advisor to CM Punjab vide letter No. ATPB/20/GL Dated 30/11/2017. . Make:- Wipro WIO 921 208 & LL13-181-65SE, Jaquar-LUNI01X220XW ,Crompton DMLN1LT8-16 & LTTT8-20,		96	Each
478	478	Supply and erection of Recessed mounted 36watt LED panel(including LED driver) with CRCA sheet having efficacy of LED fixture more than 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.LED Fitting as per circular issued by Hon. Tech. Advisor to CM Punjab Letter no ATBP/20/CL Dated 30/09/2017. Make:- PhilipsRC380B LED36S -6500 G4 L60 W60 PSD OD WH OC /jaquar LULTO1SO36XC/CROMPTON :-LCTLRNE-36-FO-CDL (2X2),WIPRO:- LM25-361-XXX-65-G1/ C&S :- LTCRP36WLED2X2/ HALONIX :- HLFPU22-02-36-CW		12	Each
479	479	Supply and erection of Heavy duty Exhust Fans 300mm 900RPM with aluminium louver shutter Canon of double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. Make:- Crompton EXHD300-6-1 /Havells Turbo Force SP / Anchor Anmol Heavy Duty .		20	Each
480	480	Supply and erection of Ceiling Fan 1200mm, 48\" with double ball bearing including flexible wire & petty material etc. for connections and testing . complete in all respects as appd. and desired by the Engineer in-charge at site. Makes:- Crompton Entrust 50-5 Star Opel White/ Havell's ES-50/ ANCHOR:-Panta Turbo Star code 13671WH / V-Guard Coolgate 5 Star 48, Halonix:- Zephyr(ISI With 5 Star Rating)		171	Each
481	481	Supply & Erection of Vertical Three phase Double door distribution board 8way (IP43 with metal door) complete with loose wire box, terminal blocks, tinned cu. Busbar, neutral link, earth bar, din bar, detachable gland plate, powder coated painting, earthing etc. as reqd. with with provision for 4pole,100/160.,=35kA four pole, djustable thermal and magnetic protection MCCB unit as Incomer and 8 Nos. TP MCB 40/63Amp.,Type-C, 10KA, . as outgoing switches complete with insulated busbar arrangement recessed in wall including the cost of cutting & filling of chases with complete connections with suitable size of thimbles/ lugs (copper/aluminium) and bonding to existing earth as per satisfaction of the Engineer -in- charge. Make:- Hager , LEGRAND , L&T		3	Each
482	482	Supply & Erection of Vertical Three phase Double door distribution board 4way (IP43 with metal door) complete with loose wire box, terminal blocks, tinned cu. Busbar, neutral link, earth bar, din bar, detachable gland plate, powder coated painting, earthing etc. as reqd. with with provision for 4pole,100/160.,=35kA four pole, djustable thermal and magnetic protection MCCB unit as Incomer and 4 Nos. TP MCB 40/63Amp.,Type-C, 10KA, . as outgoing switches complete with insulated busbar arrangement recessed in wall including the cost of cutting & filling of chases with complete connections with suitable size of thimbles/ lugs (copper/aluminium) and bonding to existing earth as per satisfaction of the Engineer -in- charge. Make:- Hager , LEGRAND , L&T		1	Each
483	483	Supply, Erection, Testing & commissioning of indoor Type Sub LT cubical panel Enclosure (dust ,vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments) . The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system,IP44 and minimum 50kA. \nFabrication:-Panel shall be made from 14/16 SWG CRCA sheet,,conforming to IS:8623.The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar channel as well as the cable chamber should be totally isolated from the feeder chamber. Where the crossing of the wire or bus link should have proper rubber gourmets or non-hygroscopic material. No live part should \"Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacture should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP44).\nFabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel. The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar channel as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus link should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.\"\n\"The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. \nPainting :- The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work . \nBusbars :-The panel shall be provided with TPN copper busbar of suitable size according to the size of MCCB's. All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.\n\"Metering :-The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. \nManufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contactor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.\nDetail of capacities of MCCB's to be installed in the cubical panel Enclosure (including the cost of MCCB's+E.R.H.) as per following . \"\nIncomer-1\n¦315Amp.415volts 36FPMCCB Unit with Adjustable Thermal and Magnetic Protection = 1Nos.\n(MCCB Adjustable Thermal and Magnetic Protection Make: L&T (DSINE), ABB (T-MAX), Schneider (NSX), Seimens(3VL),Hager):\n¦ On load change over switch 4P 160amp 415v = 1 No.\n¦ (Make: L&T-U Power, ABB-E Max, Seimens-3WL, Schneider-MVS,Hager )\nOutgoings:\n¦63 Amp.415volts =25 FP MCCB Unit with Adjustable Thermal and Magnetic Protection = 10 Nos .\n¦100Amp.415volts =35 FP MCCB Unit with Adjustable Thermal and Magnetic Protection=3Nos.. \n¦40-80Amp.415volts =35 FP MCCB Unit with Adjustable Thermal and Magnetic Protection) =1Nos.. \n¦(MCCBA djustable Thermal and Magnetic Protection Make: L&T (DSINE), ABB (T-MAX), Schneider (NSX), Seimens(3VL),Hager):r: \n¦ All Incomers & Out going With Extendable Rotary Handle with adjustabledepth \ncomplete as per schematic diagram attached / analysis & Satisfaction of the Engineer in charge at site.\nPanel Manufacturer :-Kalyani Switchgear / ETE ELECTROGEARS / POWE ASSOCIATE / UNIX		1	Each
484	484	Total D1:-		1	S
485	485	Providing Networking System
486	486	Supply & erection of Supply & erection of 24 Port Web managed 10/100 Mbps Smart Data switch with 2 Combo 10/100/1000 Mbps copper & SFP Port..complete in all respect as desired by the engineer in charge at site. Make:D-LINK/NETGEAR/EXTREME\n		2	nos
487	487	Supply and erection of CAT 6 24 Port Fully loaded Patch Panel, Rack Mountable for cable termination complete in all respect as desired by the engineer in charge at site. Make:_ D-LINK/NETGEAR/EXTREME/Schneider		2	nos
488	488	Supply & Erection of CAT 6 UTP networking cable 4 pair support up-to 10/100/1000 mbps speed PVC insulated.. complete in all respects as approved and desired by the Engineer-in-charge at site. Make D-Link/Digi-Link/AMP/SCHNEDER		600	Mtr
489	489	Supply & Erection of CAT 6 ONE Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps.. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: D-link/Panduit/Schneider		48	nos
490	490	Supply & erection of CAT 6 TWO Meter long Patch Cord Having RJ-45 Male Connectors on both ends DCC up-to 10/100/1000 mbps. complete in all respects as approved and desired by the Engineer-in-charge at site.Make: D-link/Panduit/Schneider		40	nos
491	491	Supply & erection of 600VA Online LIT sine wave UPS/ Power Plant with in built SMF batteries having 30 Minutes backup time complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.Make-APC/NUMERIC/ UNILINE/EATON/AQUA POWER.		2	nos
492	492	Supply & erection of 6U Wall mount 19’’ Rack with glass door,lock & key facility 450mm-550mm depth with CPD, Cable Manager & Fan.Make: D-Link/Comrack/Netrack		2	nos
493	493	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:\nSupply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications (Electrical Works):-
494	494	Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed		300	mtr
495	495	Total D2:-		1	S
496	496	Providing EPBAX System
497	497	Supply & erection of Digital Hybrid IP-PBX System Digital 100% Non Blocking, 06 No. Universal Slots, Universal SMPS,Auto Attendant, CLI, GSM Trunk, Digital Extension & IP Connectivity, Voice Mail, PRI Connectivity including all features listed in Product Boucher. Configured for 04 Trunk,04 Digital Extn Ports, 00 GSM Trunk Ports, 00 PRI of 32 Channels & 24 Normal Extensions Expendable to 48 TDM\nPorts & 50 IP Extension.Make: Matrix Eternity PE6S/LG/CISCO		1	nos
498	498	Supply and Erection of Operator-cum-maintenance console with Small Backlit Display, 12 Direct Dialling Keys, HD sound quality, Duplex Speaker Phone, Touch sense keys including all features listed in Product Boucher complete in all respect as desired by the engineer in charge at site. Make: Matrix/LG/CISCO		1	nos
499	499	Supply and erection 50 Pairs MDF + 50 Pair IDF with Krone Modules & Lockable Box complete in all respect as desired by the engineer in charge at site. Make: Krone		1	nos
500	500	Supply & Erection of 10 Pair DB with Original Krone Module lock & key facility complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Krone/M-Tel/Reliance/ A-Tel/Airtel		1	nos
501	501	Supply & erection of Basic Phone with CLIP and display complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.Make: Beetel Model M51/C51/P-Tel/ Binatone/PANASONIC/Siemens.		10	nos
502	502	Supply & erection of Featured Wired Telephone with Large Backlit Display, Redial, CLIP, 2 Way Speaker, Calculator, Alarm & Mute Compatible with EPABX System Without Addition Programming complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Beetel Model: M71/M73/P-Tel/ Binatone/panasonic/ Siemens.		2	nos
503	503	Supply & erection of 02 Pair 0.5mm PVC Dual sheathed Telephone Cable as per ITD Specification 113-B With Up to amendments complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Delton/ Finolex/ RR kabel/ POLYCAB/ Shalimar.		600	nos
504	504	Supply & erection of 20 Pair 0.5mm PVC Dual sheathed Telephone Cable manufactured as per ITD Specification with Up to amendments complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Delton/ Finolex/ RR kabel/ POLYCAB/ Shalimar.		50	Mtr
505	505	Supply & erection of 50 Pair 0.5mm PVC Dual sheathed Telephone Cable manufactured as per ITD Specification with Up to amendments complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. Make: Delton/ Finolex/ RR kabel/ POLYCAB/ Shalimar.		10	Mtr
506	506	Supply & erection of 1KVA Online LIT sine wave UPS/ Power Plant with in built SMF batteries having 30 Minutes backup time complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.Make-APC/NUMERIC/ UNILINE/EATON/AQUA POWER.		1	nos
507	507	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:\nSupply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications (Electrical Works):-
508	508	Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed		300	mtr
509	509	Total D3:-		1	S
510	510	Providing Campus Lighting
511	511	3-STEPPED STEEL TUBULAR POLE:\nSupply and erection of 3-Stepped steel tubular swaged and welded pole of suitable length conforming to I.S. 2713-1969 (Part I to III) / 1980 and I.S. 1161-1979 (UTS 42 kgf/mm sq.) to fixed up to a required planting depth below ground level in a hole of excavation about 45 cm dia. and suitable depth to filled in up to 15 cm below G/L with 1:2:4 cement concrete mixture and having 1:2:4 cement concrete muff of dia. 450mm, 80cm long above ground level sufficient to completely flush a MCB distribution board SPN 4way (double door) with hinged water tight cover with locking arrangement having one single pole MCB of required capacity fixed on din bar. The outer surface of the plinth to be finished with pure cement including painting of pole with two coats of approved aluminium paint as required:-
512	512	Overall length 7 metre, with planting depth 1.25 metre, length of sections 4 metre,1.5 metre and 1.5 metre (Bottom, Middle and Top respectively), Outer dia and thickness of sections 114.3mm x 4.50mm, 88.9mm x 4.05mm and 76.1mm x 3.25mm (Bottom, Middle and Top respectively) with approximate weight 73 kg.		31	Nos
513	513	GI PIPE POLE BRACKETS:\nSupply and erection of G.I. pipe ‘A’ quality of suitable length and dia. conforming to I.S. 1239 part-I 1979, including fixing up to a given depth below G/L, the hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below and above G/L with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thick ness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a MCB distribution board SPN 4way with hinged water tight cover with locking arrangement having one single pole MCB of required capacity of the same size the outer surface of the plinth to be finished with 1:2 cement plaster 6 mm thick M.S. fuse box shall have a water proof hinged cover with locking arrangement including painting of pole with two coats of approved aluminium paint as required:-\nSINGLE ARM BRACKETS:
514	514	Supply and erection of G.I. pipe 40mm dia. (A-class) single arm bracket atleast 1 metre long arm to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the top of the GI pipe pole having top outer dia. 80mm with GI reducer 80mm x 40mm with two coats of an approved aluminium paint complete in all respect as approved by the Engineer-in-charge at site.		31	Nos
515	515	Supply and erection of LED Street Light 45 watt with pressure die cast aluminium housing with control gear ( with IP 65/ IP 66 protection), toughened glass fitting, surge protection 10KV and efficacy of LED fixture minimum 100 lumens per watt complete in all respects as approved and desired by the Engineer in-charge at site .LED Fitting as per circular issued by Hon. Tech. Advisor to CM Punjab Letter no ATPB/20/GL Dated 30/11/2017 Make:- HavellENDURAPEARLNEOSL45WLED757SASYTOPC / Wipro LR02-501-XXX-57-GI /Jaquar LSRT01S045XC /CROMPTON LSTP-45-CDL.		31	Nos
516	516	XLPE/ PVC INSULATED UN-ARMOURED CABLES (LOOSE):
517	517	Supply & laying of aluminium conductor XLPE/ P.V.C. insulated un-armoured and served cable to be laid loose in the existing trench or pipe as per PWD General Specidications 2010:- Make :-Havell's/ RRKable/ Finolex
518	518	Aluminium conductor XLPE/ PVC insulated PVC sheathed un-armoured and served cable working voltage 1100volts grade 16sq.mm (4 Core)		1000	mtr
519	519	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
520	520	Supply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation (making necessary trench), placing the pipe in position and back filling with excavated soil etc. of the required size. Make :- REX/ Duraline / Amtel
521	521	Double walled corrugated (DWC) HDPE pipe63/51mm (outer/ inner dia.)		750	mtr
522	522	GALVANIZED IRON PIPES AND G.I. EARTHING:\nSupply & erection of G.I. pipe for wiring purposes including bends, inspection boxes etc., where necessary including painting as per PWD General Specifications (Electrical Works):-\nG.I. EARTHING:
523	523	Earthing of Sheet metal/ iron clad Switches and metallic cases etc., with No. 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe partly recessed and partly on surface complete with 135cm long 50mm dia. G.I. earth pipe with G.I. reducing socket (50mm x 15mm) including erection of the same, 10 metre below ground level with necessary charcoal & salt mixture etc., up to 13 metre in length (including boring & refilling).		2	nos
524	524	G.I. EARTHING (AS ADDITIONAL LENGTH):\nEarthing of metallic cases etc., with G.I. wire No. 8 S.W.G. (4mm dia.) in 15mm dia. G.I. pipe on surface including painting etc. (as additional length)		10	mtr.
525	525	Supply and Erection of earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire No. 8SWG. The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The road shall be grouted upto complete length vertically.
526	526	GI Earth rod 20 mm dia. 3 mtr. Long		31	nos
527	527	PVC INSULATED SINGLE CORE FRCOPPER CONDUCTOR CABLE: Make:- Finolex / / RRkable Havell's
528	528	Supply and erection of PVC insulated single core FRcopper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing.
529	529	PVC insulated copper conductor single core FRcable (ISI marked) overall 1.5 sq.mm, 1100volts grade		700	mtr
530	530	SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT MISCELLANEOUS ITEMS:\nS/E of SMCpedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4\" hinges & locking system with heavy duty 12\" sliding door.Placed on MS strip of size 12.5mmx2.5mm thick welded with MS sheet with 4no. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs.Front door welded x-actionally with MS flat 25mmx5mm.The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high.And pedestial with 4 Nos supporting members each of MS flat 50mmx6mm thick acc. to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint &bonding to the existing earth to be erected in the 1:2:4 CC, the platform of 150mm high from ground level & 450mm thick & 150mm from the top of the CCplatform as per Drawing attached.
531	531	Cubical Size 900mm high, 600mm wide and 350mm deep		1	No
532	532	Supply and erection of Switch Disconnector fuse unit with HRC Fuses in sheet enclosure on the existing surface (conforms to IS 13947 (PartI&III) complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connection on both sides of switch with sutiable size of Thimbles, including cost of HRC fuses as per PWD General Specifications (Electrical Works).
533	533	32Amp. 415volts three pole & neutral switch disconnector fuse unit with HRC Fuses in sheet enclosure		1	No
534	534	Total D4:-		1	S
535	535	Supply, Erection, Testing and Successful Commissioning of Diesel Generating Set1 No. 40KVA For General Light Load)
536	536	Supply, Erection, Testing and Commissioning of Silent (Sound Proof) Diesel Generator Set 40 KVA /32KW .It should be air cooled/water cooled naturally aspirated/ turbo charged/ turbo charged after cool (As per manufacturer standard).\nENGINE: The Diesel engine developing suitable BHP for giving a power rating as per ISO 8528- Part-1 in KVA at the load terminals of alternator at 1500 rpm at actual site conditions. The engine shall confirm to IS 10000/ ISO 3046/ BS: 649/ BS 5514 amended up to date have dynamically balanced Fly wheel, air cleaner (dry/ oil bath type) as per manufacturer standard. A mechanical/ electronic governor OF TYPE A1 AND A2 to maintain engine speed at all conditions of load, daily fuel service tank of minimum 8 hours running capacity as per manufacturer standard, Dry exhaust manifold with suitable exhaust residential grade silencer to reduce the noise level.suitable self-starter for 12 V/ 24 V DC ,battery charging alternator unit and voltage regulator, Lubrication oil cooler,Lubrication oil filters with replaceable elements.\nENGINE CONTROL PANEL: Engine control panel fitted and having digital display i.e Start/stop key switch/push button, Battery charging indication,Engine Hours indications, Over speed indication, High water temperature indication, Lubricant oil pressure indication,) RPM indication.\nALTERNATOR: The alternator should be designed as per (IS4722 AND IEC:34 ) standard. Rated Power Factor : 0.8 (lag), Rated voltage : 230/415 voltS, SPDP (Screen Protected Drip Proof), Degree of protection : IP-23, Ventilation : Self ventilated air cooled \n		1	Job
537	537	XLPE/ PVC INSULATED UN-ARMOURED CABLES (LOOSE):\nSupply & laying of aluminium conductor XLPE/ P.V.C. insulated un-armoured and served cable to be laid loose in the existing trench or pipe as per PWD General Specidications 2010:-\nMake :- Polycab,KEI, Grandlay, Ecko, RR kabel, Rallison, Havell's,
538	538	Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 35sq.mm (3 ½ Core)		200	nos.
539	539	COPPER EARTHING:
540	540	Earthing of Sheet metal/ iron clad switches and metallic cases etc., with 20 mm x 3 mm thick electrolytic copper tape rivetted (with 10 nos. copper rivets) to 30 cm x 120 cm x 3 mm thick tinned copper plate (made cylindrical) burried 10 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper tape on wall and in floor etc., up to 13 metre in length (including bore length). G.I. pipe 20mm dia. (A-class) should be laid in the hole of excavation from bore surface level to 1 feet below ground level and having wire mesh funnel fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm around the hole of excavation.		4	nos.
541	541	Supply and Erection of 20mm x 3mm thick copper tape (As additional length).		10	mtr
542	542	DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:\nSupply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation (making necessary trench), placing the pipe in position and back filling with excavated soil etc. of the required size. \nMake :-TeleRex,Gemni,CPE,Dura Line
543	543	Double walled corrugated (DWC) HDPE pipe 50/38 mm (outer/ inner dia.)		180	mtr
544	544	Total D5:		1	S
545	545	Solar Generation System
546	546	Supply, Installtion testing & commissioning of Grid Interactive PV System Solar Power Plant (i.e connected to utility grid) of Minimum 35KWp including required quantities of SPV modules (Hight Power density Perc Bifacial Mococrytalline based) formed in to arrays, their mounting arrangement, Power conditioning units (i.e string Solar Inverter), required DC & AC distribution panels with surge protection units, cabling from terrace to main distribution board through cable tray Bi Directional Energy Meter required Earthing (i.e 2 Nos GI strip earthing for GI Strcuture, 2 Nos GI Strip earthing for string inverter, AC & DC Distribution system) ESE stroke master (As per NFC 17 102 standard with suitable radius of protection) & 3 Nos chemical earthing with copper bonded rods along with high rise GPSP structure (Rated wind speed 170Kph) including mounting height up to 8 feet complete with transportaion, fabrication labour & civil work.\nFeatures :- \n1. Solar PV Module warranty 25 Years & certified under IS/IEC 61730 I & II IS/IEC 61701 & IS/EC 14286\n2. Power Conditioning unit (string solar inverter) & certified under IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-2, EN 61000-6-3, IEC 61683, EN 50530, IEC 60068-2-1, 2, 14, 30, EN 60529\n3. Structure 25 Years service life with AMC & certified under IS 2062 2011\n4. Complete Plant insurance for the period of 5 Years (Excluding Theft of the Material)\n5. Annual Maintenance contract for the period of 5 Years\nMake :-\n1 Solar PV Module = EMBRO, VIKRAM, ADANI, WAREE\n2 Power Conditioning Unit = KEHUA, DELTA, LUMINOUS, SOLAX, TESA\n3 AC/DC Distribution Board = EMBRO, ABB, SCHNEIDER ELECTRIC, HAVELL'S\n4 Fusion Mount structure = TATA GALVUME, POSMAC\n5 ESE Stroemaster with chemical Earthing = SABO, JMC, TP, HIGH GRID\nThe work will got done from approved MNRE (Misitry of New and Renewable Energy)/ PEDA (Punjab Energy Development Agency) contractor\nThe Rate are inclusive of all taxes including GST		30	kW
547	547	Calculation fo PSPCL charges (According to PSPCL Regulatory Act): for On Grid Solar Power Plants including Bio Dementional Meter Testing and cost of Uni Directional Meter\nApplication Processing Fee = RS 50/- per KVA		1	Each
548	548	Total D6:-		1	S
549	549	Total D1+D2+D3+D4+D5+D6:-		1	S
550	550	Cost of Ciivil work		1	S
551	551	Cost of Public health services		1	S
552	552	Cost of Electrical services		1	S

Also Visit

Tenders

Punjab Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Constn_Iti_Villagemannan_Ke, Tarn Taran-Punjab

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Constn_Iti_Villagemannan_Ke, Tarn Taran-Punjab

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us