Indian Oil Corporation Limited-IOCL has published Construction Of Barracks For Sikkim Armed Police In The Non-Licensed Area At Indane Bottling Plant , Rangpo , Sikkim. Submission Date for this Tender is 28-05-2020. Barrack Tenders in Indane Bottling Plant Rangpo Sikkim Sikkim. Bidders can get complete Tender details and download the document.
| Subject of Tender: Construction of barracks for Sikkim Armed Police in the non-licensed area at Indane Bottling Plant, Rangpo, Sikkim | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing & fixing hand rail of approved size, welding etc. to steel ladder railing,balcony railing & staircase railing including applying priming coat of approved steel primer. \ni) M.S. tube | 3000 | kg | |
| 2 | 2 | Fabrication & Erection of IOC supplied structural steel work riveted, bolted or welded in single/ built up sections,trusses & framed work hoisting, fixing in position and applying a priming coat of approved steel primer all including cutting, complete | 200 | kg | |
| 3 | 3 | Providing and fixing Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of Cold rolled steel confirming to IS:513-2008 of base metal thickness 0.50 mm, having Yield Stress of Min. 275 MPa. Steel surface shall have hot dip metallic coating of Al-Zinc alloy comprising 55% Alluminium, 43.5% Zinc and 1.5% Silicon as per the ASTM-A792M, with total mass of coating on both sides shall be 150 gms/sqm. The steel shall have organic coating with Silicon Modified Polyester (SMP) paint on continuous coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns SMP paint over 5-7 microns epoxy primer) and back side 8-10 Microns SMP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.58 MM. Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 6m or as desired by Engineer-in-charge.\ni) Profile Sheet for roofing | 200 | m2 | |
| 4 | 4 | Providing ridges or hips of width 60cm over all width plain G.S.sheet 0.80mm thick with zinc coating not less than 275gm/m², fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. | 20 | m | |
| 5 | 5 | Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :\nx) Half brick masonry in Cement mortar 1:4 (1 cement : 4 coarse sand) superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL | 40 | m2 | |
| 6 | 6 | Providing and laying cement plaster on surfaces with fine sand including curing etc. \ni) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) | 200 | m2 | |
| 7 | 7 | Finishing walls with water proofing cement paint of required shade with Two or more coats applied @ 3.84 kg/10 sqm: | 100 | m2 | |
| 8 | 8 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture | 120 | m2 | |
| 9 | 9 | Providing & fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete :\ni. 125 mm | 25 | ea |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
