}

Construction Of Art And Craft Room And Library In G . I . C Gujrara , Block Raipur , Distric Dehradun . , Raipur-Uttarakhand

Rural Engineering Services-RES has published Construction Of Art And Craft Room And Library In G . I . C Gujrara , Block Raipur , Distric Dehradun . . Submission Date for this Tender is 10-06-2020. Building Work Tenders in Raipur Uttarakhand. Bidders can get complete Tender details and download the document.




Tender Notice

24350666
Corrigendum : Construction Of Art And Craft Room And Library In G . I . C Gujrara , Block Raipur , Distric Dehradun .
Open Tender
Indian
Uttarakhand
Raipur
10-06-2020

Tender Details

Construction Of Art And Craft Room And Library In G . I . C Gujrara , Block Raipur , Distric Dehradun .

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 30-May-2020 Date and Condition Change Date 10-06-2020

Key Value

Document Fees
INR 2950 /-
EMD
INR 64000.0 /-
Tender Value
INR 31.67 Lakhs /-

BOQ Items

Name of Work:- Construction of Art & Craft room and Library in G.I.C Gujrara, Block Raipur, Distric Dehradun.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by mechanical means (Hydraulic Excavat in foundation trenches or drains (not exceeding 1.5 m in width or 1 including dressing of sides and ramming of bottoms, lift upto 1.5 out the excavated soil and disposal of surplus excavated soil as dir of 50 m. All kinds of soil. DSR NO 2.8.1 BI01010001010000000000000515BI0100001113 123.71 cum
2 2 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) DSR NO 4.1.8 BI01010001010000000000000515BI0100001114 30.23 cum
3 3 Filling available excavated earth (excluding rock) in trenches, plin sides of foundations etc. in layers not exceeding 20cm in de consolidating each deposited layer by ramming and watering, up to 50 m and lift upto 1.5 m. DSR NO 2.25a BI01010001010000000000000515BI0100001115 64.66 cum
4 4 Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete. DSR NO 2.27 BI01010001010000000000000515BI0100001116 15.65 cum
5 5 Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) DSR NO 6.1.2 BI01010001010000000000000515BI0100001117 16.57 cum
6 6 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shape and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) DSR NO 6.4.2 BI01010001010000000000000515BI0100001118 33.58 cum
7 7 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) DSR NO 5.1.2 BI01010001010000000000000515BI0100001119 30.15 cum
8 8 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) DSR NO 5.2.2 BI01010001010000000000000515BI0100001120 4.69 cum
9 9 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). DSR NO 5.3 BI01010001010000000000000515BI0100001121 36.39 cum
10 10 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete - TMT DSR NO 5.22.6 BI01010001010000000000000515BI0100001122 7140.86 kg
11 11 Centring and shuttering including strutting,ropping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. DSR NO 5.9.1 BI01010001010000000000000515BI0100001123 51.88 sq.m
12 12 Centring and shuttering including strutting,ropping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. DSR NO 5.9.3 BI01010001010000000000000515BI0100001124 232.11 sq.m
13 13 Centring and shuttering including strutting,ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. DSR NO 5.9.5 BI01010001010000000000000515BI0100001125 180.35 sq.m
14 14 Centring and shuttering including strutting,ropping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. DSR NO 5.9.6 BI01010001010000000000000515BI0100001126 81.93 sq.m
15 15 Providing and fixing pressed steel door frames confirming to IS: 43 from commercial mild steel sheet of 1.25 mm thickness including h jamb, bead and if required angle threshold of mild steel angle of se or base ties of 1.25mm pressed mild steel welded or rigidly fixed t mechanical means, adjustable lugs with split end tail to each jamb butt hinges 2.5mm thick with mortar guards, lock strike-plate and as specified and applying a coat of approved steel primer after pre surface as directed by Engineer-in-charge. Profile B DSR NO 10.14.1.1 BI01010001010000000000000515BI0100001127 77.2 metre
16 16 Same as above but Profile C DSR NO 10.14.2.1 BI01010001010000000000000515BI0100001128 41.2 metre
17 17 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete - Fixed to steel windows by welding DSR NO 9.48.1 BI01010001010000000000000515BI0100001129 215.43 kg
18 18 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with L-Type section made of 1.60m M.S. Sheet, joints mitred and welded and grinded finish profi required size with 15x3mm lugs 10cm long embedded in ce concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse graded stone aggregate 20mm nominal size) or with wooden plugs screws or rawl plugs and screws or with fixing clips or with b nuts as required including fixing of necessary butt hinges and and applying a priming coat of approved steel primers. DSR NO 10.15.1 BI01010001010000000000000515BI0100001130 351.6 kg
19 19 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size), including finishing complete. cum 5804.35 DSR NO 11.7 BI01010001010000000000000515BI0100001131 4.5 cum
20 20 12 mm cement plaster of mix in 1:4 (1 cement : 4 coarse sand) DSR NO 13.4.1 BI01010001010000000000000515BI0100001132 182.24 sq.m
21 21 12 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 coarse sand) DSR NO 13.4.2 BI01010001010000000000000515BI0100001133 172.14 sq.m
22 22 6 mm cement plaster of mix. 1:3 (1 cement: 3 fine sand) DSR NO 13.16.1 BI01010001010000000000000515BI0100001134 222.05 sq.m
23 23 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. DSR NO 5.30 BI01010001010000000000000515BI0100001135 245.26 Rm
24 24 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter DSR NO 12.41.2 BI01010001010000000000000515BI0100001136 14 Rm
25 25 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick DSR NO 11.26.1 BI01010001010000000000000515BI0100001137 167.01 sq.m
26 26 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. DSR NO 11.27 BI01010001010000000000000515BI0100001138 13.63 sq.m
27 27 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. DSR NO 16.89 BI01010001010000000000000515BI0100001139 12.15 sq.m
28 28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR NO 10.28 BI01010001010000000000000515BI0100001140 241.47 kg
29 29 Making plinth protection 50mm thick of cement concrete 1:3: cement :3 coarse sand : 6graded stone aggregate 20mm no size) over 75mm bed by dry brick ballast 40mm nominal siz rammed and consolidated and grouted with fine sand includin finishing the top smooth. DSR NO 4.17 BI01010001010000000000000515BI0100001141 24.24 sq.m
30 30 Brick edging 7cm wide 11.4cm. deep to plinth protection wit bricks of class designation 75 including grouting with cement mortar 1:4 (1 cement : 4 fine sand) DSR NO 6.44 BI01010001010000000000000515BI0100001142 40.41 metre
31 31 Providing and fixing ISI marked flush door shutters conforming to I non-decorative type, core of block board construction with frame o wood and well matched commercial 3 ply veneering with vertical g bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR NO 9.21.1 BI01010001010000000000000515BI0100001143 9.02 sq.m
32 32 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic) 300x16 mm DSR NO 9.96.1 BI01010001010000000000000515BI0100001144 4 Nos.
33 33 Providing and fixing aluminium handles ISI marked anodised (anodic coating not) 125 mm DSR NO 9.100.1 BI01010001010000000000000515BI0100001145 8 Nos.
34 34 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating ) 250x10 mm DSR NO 9.97.2 BI01010001010000000000000515BI0100001146 8 Nos.
35 35 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper DSR NO 9.101.1 BI01010001010000000000000515BI0100001147 4 Nos.
36 36 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade DSR NO 13.41.1 BI01010001010000000000000515BI0100001148 394.19 sq.m
37 37 Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as permanufacturers specifications. Two or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @0.75 ltr/10 sqm. DSR NO 13.48.1 BI01010001010000000000000515BI0100001149 182.24 sq.m
38 38 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture DSR NO 13.48.2 BI01010001010000000000000515BI0100001150 24.19 sq.m
39 39 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture DSR NO 13.48.3 BI01010001010000000000000515BI0100001151 44.64 sq.m
40 40 Renewing glass panes, with putty and nails wherever necessary. Float glass panes of thickness 4 mm DSR NO 10.30.1 BI01010001010000000000000515BI0100001152 12.7 sq.m
41 41 windows using galvanised M.S. wire gauge with average width of a in both directions with wire of dia. 0.63 mm. With 12 mm mild steel U beading. DSR NO 9.51.2 BI01010001010000000000000515BI0100001153 22.32 sq.m
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail