| 1 | 1 | Earth work in excavation by mechanical means (Hydraulicbexcavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.\n-All kinds of soil | BI01010001010000000000000515BI0100001113 | 40.5463 | CUM |
|---|
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulicbexcavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.\n-All kinds of soil | BI01010001010000000000000515BI0100001114 | 3.67755 | CUM |
|---|
| 3 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift\nupto 1.5 m.\n-All kinds of soil | BI01010001010000000000000515BI0100001115 | 29.4931 | CUM |
|---|
| 4 | 4 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. | BI01010001010000000000000515BI0100001116 | 3.52769 | CUM |
|---|
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work Upto plinth level:1:4:8 ( 1 Cement: 4 fine sand : 8 stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001117 | 4.04249 | CUM |
|---|
| 6 | 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work Upto plinth level:1:4:8 ( 1 Cement: 4 fine sand : 8 stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001118 | 0.919975 | CUM |
|---|
| 7 | 7 | Making plinth protection 50mm thick of cement\nconcrete 1:3:6 (1 cement : 3 fine sand : 6 graded well\nburnt brick aggregate 20 mm nominal size) over\n75mm bed of dry brick ballast 40mm nominal size\nwell rammed and consolidated and grouted with fine sand including finishing the top smooth. | BI01010001010000000000000515BI0100001119 | 9.1993 | sqm |
|---|
| 8 | 8 | Providing and laying in position specified grade of\nreinforced cement concrete excluding the cost of\ncentring, shuttering, finishing and reinforcement-\n1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone\naggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001120 | 6.52247 | CUM |
|---|
| 9 | 9 | Reinforced cement concrete work in walls (any\nthickness), including attached pilasters, buttresses,\nplinth and skirting courses, fillets, columns, pillars,\npiers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-\nIn plinth and skirting courses, fillets, columns, pillars, posts and struts\n1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone\naggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001121 | 1.67999 | CUM |
|---|
| 10 | 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-\nRCC work in suspended floors, roofs having slope upto\n15° landings, balconies, shelves and chajjas.\n1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone\naggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001122 | 4.09829 | CUM |
|---|
| 11 | 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing andreinforcement-\nRCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase.\n1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone\naggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001123 | 2.39489 | CUM |
|---|
| 12 | 12 | Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding allcomplete upto floor five level.\nThermo-Mechanically Treated bars/ Cold twisted\ndeformed steel bars | BI01010001010000000000000515BI0100001124 | 1607.05 | kg |
|---|
| 13 | 13 | Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits\n50 mm thick | BI01010001010000000000000515BI0100001125 | 0.600069 | sqm |
|---|
| 14 | 14 | Centering shuttering including struttings, propping etc. and removal of form work for:\nFoundations, footings, bases for columns etc. for mass concrete with timber plank | BI01010001010000000000000515BI0100001126 | 7.20035 | sqm |
|---|
| 15 | 15 | Centering shuttering including struttings, propping etc. and removal of form work for:\nSuspended floors, roofs, landings, balconies and access platform with timber planks | BI01010001010000000000000515BI0100001127 | 34.8794 | sqm |
|---|
| 16 | 16 | Centering shuttering including struttings, propping etc. and removal of form work for:\nLintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply | BI01010001010000000000000515BI0100001128 | 33.8389 | sqm |
|---|
| 17 | 17 | Centering shuttering including struttings, propping etc. and removal of form work for:\nColumns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply | BI01010001010000000000000515BI0100001129 | 30.4193 | sqm |
|---|
| 18 | 18 | First class brick work in foundation and plinth\nincluding cost of all materials as required complete:-\nIn cement mortar 1:6 ( 1 cement : 6 fine sand ). | BI01010001010000000000000515BI0100001130 | 7.22185 | CUM |
|---|
| 19 | 19 | Half brick masonry work with first class bricks in\nfoundation and plinth including cost of all materials as required complete:-\nIn cement mortar 1:4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001131 | 4.13961 | sqm |
|---|
| 20 | 20 | Half brick masonry work with first class bricks in\nsuperstructure upto floor five level including cost of\nall materials as required complete:-\nIn cement mortar 1:4 ( 1 cement : 4 fine sand ). | BI01010001010000000000000515BI0100001132 | 54.9397 | sqm |
|---|
| 21 | 21 | Honey comb brick masonry work of half brick\nthickness with first class bricks in superstructure for\nall level including cost of all materials as required\ncomplete:-\nIn cement mortar 1:3 ( 1 cement : 3 fine sand ). | BI01010001010000000000000515BI0100001133 | 10.6037 | sqm |
|---|
| 22 | 22 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with\nhomogenous fine cellular structure having smooth\nouter integral skin having 60mm width & 30mm\nthickness and shall be fixed to wall as per\ninstructions of Engineer-In-Charge using 100x8 sheet metal CSK screws. | BI01010001010000000000000515BI0100001134 | 39.5995 | mtr |
|---|
| 23 | 23 | Providing and fixing 28 mm thick door shutter made\nof solid PVC foam profile with homogenous fine\ncellular structure having smooth outer integral skin\nhaving 71mm width & 28mm thick as vertical &\nhorizontal styles. Joints are made using solvent\nadhesive and GI ‘C sections (39mm x 19mm x 0.6mm\nthick) or M S pipe (40mm x 20mm ) stiffener frame\ninsert & telescopic polymeric ‘L’ corners .The panel\nshall be filled with 3mm thick high - pressure\ncompact laminate as per manufacturer’s\nspecifications and directions of the Engineer-incharge, cover moulding shall be provided for\ncovering fixing screws and elegant look.( for W.C.\nbathroom door shutter). | BI01010001010000000000000515BI0100001135 | 12.5998 | sqm |
|---|
| 24 | 24 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required. | BI01010001010000000000000515BI0100001136 | 2.51994 | sqm |
|---|
| 25 | 25 | Providing and fixing fan clamp type-I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete. | BI01010001010000000000000515BI0100001137 | 1.99824 | Nos |
|---|
| 26 | 26 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or\nround bars etc. all complete.\n | BI01010001010000000000000515BI0100001138 | 36.7245 | kg |
|---|
| 27 | 27 | Providing and laying 1st quality ceramic glazed floor\ntiles of approved size conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades as approved by Engineer-in-charge over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.\nCeramic Glazed Tiles 1st quality 300 x 300mm in all shadesand designs | BI01010001010000000000000515BI0100001139 | 15.6996 | sqm |
|---|
| 28 | 28 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shadecomplete. | BI01010001010000000000000515BI0100001140 | 13.8155 | sqm |
|---|
| 29 | 29 | Providing and fixing precast chequered cement concrete tiles 18 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry including rubbing and cleaning complete as per direction of the Engineer-in- Charge. | BI01010001010000000000000515BI0100001141 | 1.26066 | sqm |
|---|
| 30 | 30 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. | BI01010001010000000000000515BI0100001142 | 16 | sqm |
|---|
| 31 | 31 | 12 mm cement plaster of mix\nIn cement mortar 1 : 4 ( 1 cement : 4 fine sand ) | BI01010001010000000000000515BI0100001143 | 122.04 | sqm |
|---|
| 32 | 32 | 15 mm cement plaster on the rough side of single or\nhalf brick wall of mix:\nIn cement mortar 1 : 4 ( 1 cement : 4 fine sand ) | BI01010001010000000000000515BI0100001144 | 69.0103 | sqm |
|---|
| 33 | 33 | 6 mm cement plaster of mix :\nIn cement mortar 1 : 3 ( 1 cement : 3 fine sand ) | BI01010001010000000000000515BI0100001145 | 24.1877 | sqm |
|---|
| 34 | 34 | neat cement punning | BI01010001010000000000000515BI0100001146 | 47.991 | sqm |
|---|
| 35 | 35 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] | BI01010001010000000000000515BI0100001147 | 90.8315 | sqm |
|---|
| 36 | 36 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on new work ( two or more coats applied @ 1.43 litre/10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] | BI01010001010000000000000515BI0100001148 | 44.2811 | sqm |
|---|
| 37 | 37 | Painting with synthetic enamel paint ( two or more\ncoats ) of required colour of approved brand and\nmanufacture on new work to give an even shade.\n[Payment shall be made after submission of Test\nCertificate issued by the Manufacturer] | BI01010001010000000000000515BI0100001149 | 9.12043 | sqm |
|---|
| 38 | 38 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :\nWhite Vitreous china Orrisa pattern W.C. pan of size\n580x440 mm with integral type foot rests. | BI01010001010000000000000515BI0100001150 | 4 | Nos |
|---|
| 39 | 39 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls\nwherever require :\nWhite Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. | BI01010001010000000000000515BI0100001151 | 1.99981 | Nos |
|---|
| 40 | 40 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001152 | 1.99943 | Nos |
|---|
| 41 | 41 | Providing and fixing PTMT towel rail complete with\nbrackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.\n600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. | BI01010001010000000000000515BI0100001153 | 8 | Nos |
|---|
| 42 | 42 | Providing and fixing unplasticised -PVC pipe clips of\napproved design to unplasticised - PVC pipes by\nmeans of 50x50x50mm hard wood plugs, screwed\nwith M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc.\n75mm | BI01010001010000000000000515BI0100001154 | 40 | Nos |
|---|
| 43 | 43 | Providing and fixing unplasticised -PVC pipe clips of\napproved design to unplasticised - PVC pipes by\nmeans of 50x50x50mm hard wood plugs, screwed\nwith M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc.\n110mm | BI01010001010000000000000515BI0100001155 | 50 | Nos |
|---|
| 44 | 44 | Providing and fixing to the inlet mouth of PVC pipe\nPTMT grating with thickness of 8mm and weighing not less than 100gm. complete. | BI01010001010000000000000515BI0100001156 | 40.64 | Nos |
|---|
| 45 | 45 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:\n75mm dia | BI01010001010000000000000515BI0100001157 | 10.9979 | Nos |
|---|
| 46 | 46 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:\n110mm dia | BI01010001010000000000000515BI0100001158 | 21 | Nos |
|---|
| 47 | 47 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:\ncoupler\n75mm | BI01010001010000000000000515BI0100001159 | 3.00518 | Nos |
|---|
| 48 | 48 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:\ncoupler\n110mm | BI01010001010000000000000515BI0100001160 | 8 | Nos |
|---|
| 49 | 49 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:\nSingle equal te without door\n75x75x75mm | BI01010001010000000000000515BI0100001161 | 5.99628 | Nos |
|---|
| 50 | 50 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:\nSingle equal tee without door\n110x110x110mm | BI01010001010000000000000515BI0100001162 | 9.00057 | Nos |
|---|
| 51 | 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:\nSingle equal tee with door\n75x75x75mm | BI01010001010000000000000515BI0100001163 | 3.99682 | Nos |
|---|
| 52 | 52 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:\nSingle equal tee with door\n110x110x110mm | BI01010001010000000000000515BI0100001164 | 6.00105 | Nos |
|---|
| 53 | 53 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:\nBend 87.5\n75mm | BI01010001010000000000000515BI0100001165 | 10 | Nos |
|---|
| 54 | 54 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:\nBend 87.5\n110mm | BI01010001010000000000000515BI0100001166 | 10 | Nos |
|---|
| 55 | 55 | Cutting chases in brick masonry walls for following\ndiameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4(1cement: 4 coarse sand):\n110mm | BI01010001010000000000000515BI0100001167 | 5.00145 | Nos |
|---|
| 56 | 56 | Providing and fixing uplasticised PVC connection\npipe with brass unions :\n45 cm length\n15 mm nominal bore | BI01010001010000000000000515BI0100001168 | 6.00218 | Nos |
|---|
| 57 | 57 | Providing and fixing C.P. brass bib cock of approved\nquality conforming to IS:8931\n 15 mm nominal bore | BI01010001010000000000000515BI0100001169 | 11.9996 | Nos |
|---|
| 58 | 58 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.\n25 mm nominal bore. Weighing not less than 62 gms. | BI01010001010000000000000515BI0100001170 | 4.00335 | Nos |
|---|
| 59 | 59 | Providing and fixing PTMT soap Dish Holder having\nlength of 138mm, breadth 102mm, height of 75mm\nwith concealed fitting arrangements weighing not\nless than 106 gms. | BI01010001010000000000000515BI0100001171 | 2.00341 | Nos |
|---|
| 60 | 60 | Providing and fixing ball valve (brass) of approved\nquality complete :\n25 mm nominal bore | BI01010001010000000000000515BI0100001172 | 3.99964 | Nos |
|---|
| 61 | 61 | Providing and fixing Polyethelene AluminiumPolyethelene (PEALPE)\nComposite Pressure Pipes conforming to IS 15450 U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 800 C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. | BI01010001010000000000000515BI0100001173 | 28.0019 | mtr |
|---|
| 62 | 62 | Providing and fixing Polyethelene AluminiumPolyethelene (PEALPE)\nComposite Pressure Pipes conforming to IS 15450 U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 800 C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. | BI01010001010000000000000515BI0100001174 | 33.9993 | mtr |
|---|
| 63 | 63 | Providing and placing on terrace (at all floor levels)\npolyethylene water storage tank ISI : 12701 marked\nwith cover and suitable locking arrangement and\nmaking necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001175 | 1000 | ltrs |
|---|
| 64 | 64 | Double equal junction of required degree with door\n110x110x110 x110 mm | BI01010001010000000000000515BI0100001176 | 4.0009 | Nos |
|---|
| 65 | 65 | providing and fitting fixing of 1 O.H.P mono block pump including all accessories etc | BI01010001010000000000000515BI0100001177 | 1 | Nos |
|---|
| 66 | 66 | Providing, hoisting and fixing upto floor five level\nprecast reinforced cement concrete work in string\ncourses, bands, copings, bed plates, anchor blocks,\nplain window sills and the like including the cost of\nrequired centring, shuttering, finishing smooth with\n6mm thick cement plaster 1:3 (1cement : 3 fine sand) on exposed surfaces complete, but excluding cost of reinforcement with cement concrete 1:2:4 (1cement : 2 fine sand : 4 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001178 | 0.085968 | Nos |
|---|
| 67 | 67 | providing and laying filter media with jhama brick aggregates as per specification to a thickness of not less than 600mm with smaller size towards the soil & bigger size size toward sthe wall & providing over the entire surfce behind abutment , wing wall, return wall to the full height compacted to firm condition complete as per drawing and MoRD technical specification clause 1204.3.8 | BI01010001010000000000000515BI0100001179 | 1.60416 | Nos |
|---|
