Sales : +91-777 804 8217
| Name of Work: Construction of 11 (Eleven) District Science Centre for ASTEC under Department of Science & Technology, Assam at 1.Dibrugarh (Sessa TE.), 2.Sibsagar (Charaideo), 3.Nagaon (Hojai), 4.Biswanath, 5.Udalguri,6.Baksha (Mushalpur), 7.Goalpara, 8.Dhubri (Mancachar),9.Dhubri (Golakganj) 10.Hailakandi, 11.Karimganj | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing cast in-situ manually driven reinforced cement concrete piles of using required grade of cement concrete of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings. Reinforcement to be measured and paid seperately as per item no. 21.4.1 \nC) UNIFORM PILE\nd) Pile Dia 400 mm\ni) Upto 10 M | item1 | 30800 | Rm |
| 2 | 2 | Extra for using admixture & plasticiser\n(a) RCC grade M20\niv) Pile Dia 400 mm | item2 | 9900 | Rm |
| 3 | 3 | Extra for boring specified diameter pile in high sub-soil water level requiring use of drilling mud and extra cement\n(iii) 400 mm dia | item3 | 11220 | Rm |
| 4 | 4 | Empty boring for specified diameter piles from ground level to cut-off level.\nd) Pile Dia 400 mm | item4 | 2310 | Rm |
| 5 | 5 | Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc)\n(A) TMT bar made of Primary producer (From Primary producer) | item5 | 2546.72 | Qtl |
| 6 | 6 | Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load) | item6 | 792 | Ton |
| 7 | 7 | Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load) | item7 | 1056 | Ton |
| 8 | 8 | Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.\n(A) Up to a depth of 2.00m below the existing ground level. (a) in ordinary soil. | item8 | 39160 | Cum |
| 9 | 9 | Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.\n(c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. | item9 | 19800 | Cum |
| 10 | 10 | Supplying and filling sand gravel in foundation trenches of column footings over slushy soil including local carriage of materials within 8 km pumping out of water, ramming etc. complete for strengthening the bearing capacity of the soil as directed and specified including payment of Forest Royalty and Sales Tax and other duties and taxes as may be necessary. | item10 | 1430 | Cum |
| 11 | 11 | Extra lead per km truck carriage for sand gravel beyond the initial lead of 8 km. | item11 | 1100 | Cum |
| 12 | 12 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).\n(a) In prop 1cement: 3 sand :6 coarse aggregate by volume | item12 | 2057 | Cum |
| 13 | 13 | Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).\n(b) In prop 1cement: 4 sand :8 coarse aggregate by volume | item13 | 841.17 | Cum |
| 14 | 14 | Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | item14 | 2403.5 | Sqm |
| 15 | 15 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) \n(I) Using Mixer Machine\n(A) In substructure up to plinth level\nFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.\nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item15 | 3135 | Cum |
| 16 | 16 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) \n(I) Using Mixer Machine\n(B) In super structure from plinth level up to 1st floor level. \ni) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc. \nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item16 | 715 | Cum |
| 17 | 17 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) \n(I) Using Mixer Machine\n(B) In super structure from plinth level up to 1st floor level. \nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item17 | 495 | Cum |
| 18 | 18 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:\n3.2.1.1 Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | item18 | 1119.91 | Sqm |
| 19 | 19 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:\n3.2.1.2 Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.\n(a) For depth not exceeding 1.0M. | item19 | 959.2 | Sqm |
| 20 | 20 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:\n3.2.1.3 Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.\n(a) Floors etc. upto 200mm in thickness. | item20 | 1081.19 | Sqm |
| 21 | 21 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:\n3.2.1.6 Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like. | item21 | 2793.89 | Sqm |
| 22 | 22 | Providing form work of 12mm thick Plywood board and removal of the same in edges of slabs and breaks in floors and walls etc. of in-situ reinforced concrete works upto first floor level.\n(a) Thickness not exceeding 200mm. | item22 | 1013.54 | Rm |
| 23 | 23 | Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.\n(a) Brick on flat soling. | item23 | 16904.5 | Sqm |
| 24 | 24 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall\n(a) In cement mortar in proportion 1:4 (1 cement:4 sand) | item24 | 1705 | Sqm |
| 25 | 25 | 112 mm thick reinforced brick wall in prop 1:5 reinforced with two lines of M.S rod/ Tor steel as specified embeded in 38 mm thick concrete course in prop.1:2:4 with coarse agg. 12mm down at every fourth courses embeded with protruding rod in column including curing etc.complete as directed ( M.S rod/Tor steel shall be measured and paid separately) in super structure above plinth up to 1st floor level. | item25 | 550 | Sqm |
| 26 | 26 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.\n(b) 20 mm thick | item26 | 5453.8 | Sqm |
| 27 | 27 | 40 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed. | item27 | 13824.7 | Sqm |
| 28 | 28 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed.\n(a) 15 mm thick | item28 | 13824.7 | Sqm |
| 29 | 29 | 18 mm thick marble stone tiles in flooring including risers and treads of steps, skirting, dado, walls, pillars laid with 10 mm thick base of cement plaster in prop.1:3 ( I cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing complete with marble tiles of specified quality and shade at all levels.\n(c) With 18mm thick marble stone tiles of size 300mm x 300mm\n(iii) Kumari Marble | item29 | 609.84 | Sqm |
| 30 | 30 | Providing 18mm thick Granite slab on vertical face of pedestal laid over 10 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade. | item30 | 66 | Sqm |
| 31 | 31 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)\na) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make\ni) Of size 400mmx400mm and above | item31 | 605 | Sqm |
| 32 | 32 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)\nb) Executive range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make\ni) Of size 800mmx800mm and above | item32 | 1100 | Sqm |
| 33 | 33 | Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).\ni) Of size 300mmx450mm and above. | item33 | 440 | Sqm |
| 34 | 34 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)\na) Normal range \nSomany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make\nii) Of size 600mmx600mm and above. | item34 | 825 | Sqm |
| 35 | 35 | Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).\nii) Of size150mmx605mm and above (Strips). | item35 | 550 | Sqm |
| 36 | 36 | Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika / Pedelite /Rouf) / white cement complete at all level as specified and directed.\n(A) CERAMIC \ni)Normal range (Sizes 300 mm x 300mm and above)\n(a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate. | item36 | 1063.26 | Sqm |
| 37 | 37 | 25 mm thick cement concrete topping 1:2:4 (1cement : 2 coarse sand : 4 coarse aggregate of 12 mm nominal size) finished with a floating coat of neat cement finish to be laid in panels including curing complete as directed. | item37 | 880 | Sqm |
| 38 | 38 | Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.\n(a) 15 mm thick | item38 | 2986.5 | Sqm |
| 39 | 39 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \nB) On fair side\n(a). In cement mortar in proportion 1:3.(1 cement:3 sand) | item39 | 5255.69 | Sqm |
| 40 | 40 | 15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. \nA) On rough side\na) In cement mortar 1:3 | item40 | 388.74 | Sqm |
| 41 | 41 | Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. \nCeiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). \n(i) 9.5mm thick | item41 | 385 | Sqm |
| 42 | 42 | Providing ,fitting and fixing A.C. building board in ceilling with necessary nails, wood screws including 1st class local wood 50mm x 12mm (hollock/bonsum/sundi) beading including paint ing two coats to timber beads complete as directed ( ceilling joist to be measured and paid separately).\n(b). 6 mm thick. | item42 | 2553.98 | Sqm |
| 43 | 43 | Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm . Using 4mm/6mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Board as per IS 14862, to be placed in a grid of G.I. system duly suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge. \nFinally, if specified, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer before installing it on the grid.\n(A) Standard Ceilings of Everest make or equivalent as directed by the departement\n(ii) Using 6 mm thick FC Board | item43 | 1397 | Sqm |
| 44 | 44 | Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement\n(iii) 0.50 mm thick | item44 | 1320 | Sqm |
| 45 | 45 | Providing Pre Painted Galvalume Sheet (PPGL) accessories ( Ridges / Valley / Gutter / Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement\n(iii) 0.50 mm thick | item45 | 990 | Rm |
| 46 | 46 | Providing wood work in frame of false ceiling partitions etc.sawn, wrought, framed hoisted and fixed in positon with spikes, nails, M.S flat,angle/ cleats with bolt and nuts complete including kiricide oiling two coats to unexposed surfaces of the timber (M.S flats, angle cleats, and bolt and nuts required for flat, angle cleats wherever necessary shall be measured and paid separately) \n(b) With Gamari/ Bonsum/ Sundi | item46 | 275 | Cum |
| 47 | 47 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete. | item47 | 2777.94 | Rm |
| 48 | 48 | Supplying, fitting and fixing 30mm thick flush door(single leaf finished) made of phenol bonded Duratuff exterior grade (both side) plain medium density fibre board using 4 nos of hinges 125mm long ensuring that the hinges are not fixed less than 150mm from the edges with 8 nos. parallel sunk fully threaded screws 38mm long, should be used for fixing the hinges to the flush door after drilling a pilot hole 2.50mm dia 40mm long . Screws should not be hammered . Lock, tower bolts etc. necessary.\n(b) 40mm thick.\nii) One side teak and other side commercial. | item48 | 863.94 | Sqm |
| 49 | 49 | Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) \na) With Teak wood / Sissu wood.\n(i) 40 mm thick with panel inserts of 20mm thickness. | item49 | 1464.65 | Sqm |
| 50 | 50 | Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) \nc) With 1st class local wood (Bola/Sundi)\n(i) 40 mm thick with panel inserts of 20mm thickness. | item50 | 275 | Sqm |
| 51 | 51 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. \n(b) With 1st class timber (Bonsum/ Sundi) | item51 | 55.99 | Cum |
| 52 | 52 | Providing wood work in frame of false ceiling partitions etc.sawn, wrought, framed hoisted and fixed in positon with spikes, nails, M.S flat,angle/ cleats with bolt and nuts complete including kiricide oiling two coats to unexposed surfaces of the timber (M.S flats, angle cleats, and bolt and nuts required for flat, angle cleats wherever necessary shall be measured and paid separately) \n(b) With Gamari/ Bonsum/ Sundi | item52 | 3.52 | Cum |
| 53 | 53 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. \n(a) With sal wood | item53 | 69.08 | Cum |
| 54 | 54 | Providing wood work in frame of false ceiling partitions etc.sawn, wrought, framed hoisted and fixed in positon with spikes, nails, M.S flat,angle/ cleats with bolt and nuts complete including kiricide oiling two coats to unexposed surfaces of the timber (M.S flats, angle cleats, and bolt and nuts required for flat, angle cleats wherever necessary shall be measured and paid separately) \n(a) With sal wood | item54 | 12.1 | Cum |
| 55 | 55 | Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.\nI Ornamental grill\n(c). Fixed to Brickwork/P.C.C/R.C.C. | item55 | 49500 | kg |
| 56 | 56 | Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.\n(a)2 Track sliding window\n(iv) 5 mm clear glass | item56 | 1052.15 | sqm |
| 57 | 57 | Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having \"GREENLINE\" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent.\nWith 5mm clear glass\n(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel)\n(WINSTA KOMMERLING/ FINESTA/ ENCRAFT)\n(i) 2-Panel with 5mm clear float glass | item57 | 2263.58 | sqm |
| 58 | 58 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.\na). With ready mixed \"red-lead/ red oxide\" primer. | item58 | 605 | Sqm |
| 59 | 59 | Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Nerolac Paints Limited of required shade on old/ new wall surface to give an even shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats). | item59 | 1359.71 | Sqm |
| 60 | 60 | Providing and fixing plain with special metal, sachputty and glazing clip in steel window / doors / cleastory windows including necessary cutting to required sized for all floors.\n(1). Clear sheet glass panes \n(v). 5.00mm thick.\n | item60 | 330 | Sqm |
| 61 | 61 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. \na) Openable | item61 | 275 | Sqm |
| 62 | 62 | Supplying, fitting and fixing door frame made of M.S. equal angle of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing Aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall/ R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed. (Door hinges to be paid as per relevant item of the schedule of rates). | item62 | 275 | Rm |
| 63 | 63 | 15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete. | item63 | 2985.51 | Sqm |
| 64 | 64 | Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) \n(I) Using Mixer Machine\nA) In substructure up to plinth level\nFoundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.\nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item64 | 10450 | Cum |
| 65 | 65 | Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) \n(I) Using Mixer Machine\n(B) In super structure from plinth level up to 1st floor level. \ni) Vertical members like column, pillars, post, struts etc\nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item65 | 1210 | Cum |
| 66 | 66 | Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) \n(I) Using Mixer Machine\n(B) In super structure from plinth level up to 1st floor level. \nii) Horizontal members like beam, lintel, girder bressumer etc.\nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item66 | 1540 | Cum |
| 67 | 67 | Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) \n(I) Using Mixer Machine\n(B) In super structure from plinth level up to 1st floor level. \niii) Suspended floor (Slab, balcony, staircase etc)\nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item67 | 1045 | Cum |
| 68 | 68 | Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) \n(I) Using Mixer Machine\n(B) In super structure from plinth level up to 1st floor level. \nv) Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band.\nN) Without using admixture, plasticiser\nb) M20 grade concrete or Prop. 1:1.5:3 | item68 | 605 | Cum |
| 69 | 69 | Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) \n(I) Using Mixer Machine\n(B) In super structure from plinth level up to 1st floor level. \niv) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc. \nN) Without using admixture, plasticiser\n(b) M20 or Prop. 1:11/2:3 | item69 | 385 | Cum |
| 70 | 70 | Providing and laying plain/reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) \n(I) Using Mixer Machine\n(B) In super structure from plinth level up to 1st floor level. \nvi) On domes, vaults and shell roof\nN) Without using admixture, plasticiser\n(b) M20 or Prop. 1:11/2:3 | item70 | 1650 | Cum |
| 71 | 71 | Extra for every subsequent floor above 1st floor on item no 32.1.1 | item71 | 3342.79 | Sqm |
| 72 | 72 | Brick work in cement morter with 1st class brick including cement mortar plastering, racking out joints and dewatering if necessary, and curing complete as directed in sub-structure up to plinth level.\n(I) One side plastering with 10mm thick \ni) Using plastering of cement mortar prop. 1:4\na) Brick work in cement morter proportion 1:5 | item72 | 1650 | Cum |
| 73 | 73 | 112mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately)\nB) Both side plastering \nI) With fair side 10mm thick and rough side 15mm thickplastering\nii) In prop. 1:5\nb) Brick work in cement morter proportion 1:5 | item73 | 22084.7 | Sqm |
| 74 | 74 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed.\na) 100mm thick slab | item74 | 944.9 | sqm |
| 75 | 75 | Providing and fixing Stainless Steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge.\n(For payment, only weight of Stainless Steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered) | item75 | 3025 | Kg |
| 76 | 76 | Providing and fixing Mineral Fiber Acoustic Ceiling Tiles in 600mm x 600mm of 13mm/15mm thickness to be placed in E- Grid Suspended Ceiling Grid 2430 System consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. Main Runner shall be placed along the shorter dimension of the area to be covered. The distance between the two Main Runners to be maintained at 1200mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm.E-Grid of module size 600mm x 600mm shall be supported by 4/6 mm dia G.I. wire from purlins/soffit Mineral Fiber Acoustic Ceiling Tiles of Everest Industries Limited should be placed in the E-Grid module to form a False Ceiling including the cuttings complete as directed.\nA) Everest Designer Ceilings or equivalent as directed by the departement (Primered)\nB) Using 15mm thick ceiling tiles | item76 | 1100 | Sqm |
| 77 | 77 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. \n(b). With ready mixed paint , wood primer (white). | item77 | 3568.51 | Sqm |
| 78 | 78 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.\n(i).Surfaces over 100mm in width or girth.\nb). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | item78 | 3568.51 | Sqm |
| 79 | 79 | Extra over item no above for every subsequent coat of paint. \n(i).Surfaces over 100mm in width or girth.\nb). High glossy purpose ( Berger paint/ ICI paint). | item79 | 3700.51 | Sqm |
| 80 | 80 | m) Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth.\n(i).Priming coat with distemper primer | item80 | 1145.76 | Sqm |
| 81 | 81 | Finishing wall with water proofing weather coat smooth anti-fungal exterior painting of Ace brand of Asian Paints and of required shade on old/new wall surface after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | item81 | 916.63 | Sqm |
| 82 | 82 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)\n(i) Thickness = 1.5 mm thick | item82 | 74827.7 | Sqm |
| 83 | 83 | a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. | item83 | 79413.8 | Sqm |
| 84 | 84 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture ( Berger paint/ ICI paint) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.\n(a).Plastic Emulsion Paint of approved brand and manufacture ( Asian paint/Berger paint/ ICI paint) | item84 | 42662.6 | Sqm |
| 85 | 85 | Extra over item no above above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture ( Berger paint/ ICI paint).\n(i).Plastic Emulsion Paint of approved brand and manufacture ( Asian paint/Berger paint/ ICI paint) | item85 | 25323.8 | Sqm |
| 86 | 86 | Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats) | item86 | 32208.4 | Sqm |
| 87 | 87 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.(anodised to bright natural matt & satin finished)\na) Sliding door bolts\nii) 250mm x 16mm | item87 | 3217.17 | Nos |
| 88 | 88 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\nb) Tower bolts\nii) 250mm x 12mm | item88 | 1540 | Nos |
| 89 | 89 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.(anodised to bright natural matt & satin finished)\nc) Door handles\niii) 150mm | item89 | 1870 | Nos |
| 90 | 90 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\nt) Door stopper with rubber stopper | item90 | 1683 | Nos. |
| 91 | 91 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\nm) Mortice lock vertical type\ni) 65mm (Godrej with handle (2-lever) | item91 | 726 | set |
| 92 | 92 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) \nb) Other ISI approved TMT reinforcement bar (SAI/BISCON/ THERMAX)\n(For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. . | item92 | 4039.75 | Qtl |
| 93 | 93 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) \na) From Primary Producer: TATA/SAIL/ Jindal steel/ Shyam steel/ RINL\n(i) TMT Corrosion resistant steel (CRS) reiforcement bar | item93 | 3300 | Qtl |
| 94 | 94 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) \na) From Primary Producer: TATA/SAIL/ Jindal steel/ Shyam steel/ RINL\n(ii)Super Ductile (SD) TMT reinforcement bars | item94 | 3108.82 | Qtl |
| 95 | 95 | Extra over item above for each subsequent floor or part thereof above first floor level. | item95 | 1556.94 | Qtl |
| 96 | 96 | Providing, fitting, hoisting and fixing of roof trusses fabricated using any one or combination all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS of specification and including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. \na) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997 | item96 | 275 | Qtl |
| 97 | 97 | Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement\n(v) 0.60 mm thick | item97 | 4400 | Sqm |
| 98 | 98 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. \nb) Using other ISI marked approved circular hollow section | item98 | 6.93 | Qtl |
| 99 | 99 | Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement\n(v) 0.60 mm thick | item99 | 2794 | RM |
| 100 | 100 | Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item100 | 16574.7 | Sqm |
| 101 | 101 | Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.\na) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution. | item101 | 18224.6 | Sqm |
| 102 | 102 | Jungle clearing including cutting bamboo and trees below 500mm girth and removing the same outside the limit as directed.\n(b). Mediuum jungle. | item102 | 84920 | Sqm |
| 103 | 103 | Felling and removing\nc).Cutting trees including uprooting and removing where necessary.\n(iv).1800mm girth and above | item103 | 1430 | Each |
| 104 | 104 | Supplying and dibbling of selected lawn grass [ Doob grass (Cynodon dactylon), cushion grass (Axonopus affinis)] after preparing the land by ploughing / working to a depth of 40 -45 cm, removing of all unwanted debris ( rubbles, pebbles, plant roots etc.), mixing of organic manure(10kg - 15kg/sq.m), levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc.( as specified) for a period of six months from the date of dibbling including the application of recommended dose of fertilizers(N:P:K) mixture as specified and directed by the department.\n(b) By Carpet grass (Axonopus affinis) | item104 | 6688 | Sqm |
| 105 | 105 | Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed\n(B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD\n(iii) With Chinese Bamboo | item105 | 550 | METER |
| 106 | 106 | Supplying and planting of ornamental trees (1'-0\" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed . \nSHADE TREE\n(A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar | item106 | 1100 | Each |
| 107 | 107 | Providing and fixing gate as per approved drawing and as directed by the Department. | item107 | 11 | Job |
| 108 | 108 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (10 kg)\nBRAND : FIRESTOP / FIREND / FIRE SHIELD/ GETECH/ MINIMEX | item108 | 242 | Each |
| 109 | 109 | Construction of Sub-grade and earthen shoulders with approved materials obtained from borrow pits, with all lifts & leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 (including compensation of earth ). (Including cost of testing of materials at site and laboratory as directed by the deptt.) \na) from Private land | item109 | 2273.7 | Cum |
| 110 | 110 | Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 of MoRTH specifications (with an initial lead of 5 km) (including cost of testing of materials at site and laboratory as directed by the deptt.) \n(a)Using Grading I material | item110 | 2273.7 | Cum |
| 111 | 111 | Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 30 N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and Technical specification clause 1504 of MORD. | item111 | 7408.5 | Sqm |
| 112 | 112 | Providing and laying of sand as directe and specified by department | item112 | 1727 | Cum |
| 113 | 113 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)\nA) Parryware make\na) White\n(v) Elite S Trap (Cat No.C0297) (inclusive of seat cover) | item113 | 33 | Each |
| 114 | 114 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)\nC) Jaquar make\na) White\n(iii) Size 623 x 480x 355- Anglo Indian S Trap (Cat No.CNS-WHT-WH12) (inclusive of seat cover) | item114 | 242 | Each |
| 115 | 115 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\nA) Parryware make\na) White\n(i)Economy Single Flush (Cat No.C8090/C8055) | item115 | 275 | Each |
| 116 | 116 | Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified. | item116 | 33 | Each |
| 117 | 117 | Providing, fitting and fixing CP towel rail complete as directed and specified.\n(b) Sona make \n(i) Towel rail Diplomat 300mm long (Cat.No.TR-0605) | item117 | 33 | Each |
| 118 | 118 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)\n1.13.2 (without pedestal)\n(A) Parryware Make\n(a) White\n(iii) Tunga Basin 450 x 300 (Cat. No.C0401) | item118 | 33 | Each |
| 119 | 119 | Providing fitting and fixing Decorative Mirror complete as directed and specified.\n(B) Jaquar Make \n(b) Swivel Mirror (Cat. No.ACN-1195N) | item119 | 275 | Each |
| 120 | 120 | Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.\n(i) Jaquar Make \n(b) Queen's (Cat.No.AQN-7731) | item120 | 99 | Each |
| 121 | 121 | Providing, fitting and fixing CP towel rail complete as directed and specified.\n(a) Jaquar make \n(iii) Queen's (600mm long) (Cat.No.AQN-7711) | item121 | 275 | Each |
| 122 | 122 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately)\n1.13.1 PEDESTAL BASIN (with pedestal)\n(C) Jaquar Make\n(a) White\n(iv) Fonte (Cat. No.FMS-WHT-0606) | item122 | 275 | Each |
| 123 | 123 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. \n(a) In exposed surfaces or in trences.\n(ii) 110mm dia. | item123 | 3712.94 | Rm |
| 124 | 124 | Providing fitting and fixing PVC pipes of 6 Kg/cm2 ( Supreme / Prince ) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(iv) 75 mm dia. | item124 | 3575 | Rm |
| 125 | 125 | Sipplying fitting and fixing of 87.5 degree PVC bend ( Supreme / Prince ) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(ii) 110mm dia. | item125 | 1342 | Each |
| 126 | 126 | Sipplying fitting and fixing of 87.5 degree PVC bend ( Supreme / Prince ) or other ISI approved including joining, fitting and fixing with clamps etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(iv) 75 mm dia. | item126 | 1342 | Each |
| 127 | 127 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(ii) 110mm dia. | item127 | 1199 | Each |
| 128 | 128 | Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(iv) 75 mm dia. | item128 | 1243 | Each |
| 129 | 129 | Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trences.\n(ii) 110mm dia. | item129 | 1584 | Each |
| 130 | 130 | Sipplying fitting and fixing PVC plain single tee of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(i) 160mm dia | item130 | 330 | Each |
| 131 | 131 | Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trences.\n(iv) 75 mm dia. | item131 | 1089 | Each |
| 132 | 132 | Sipplying fitting and fixing PVC plain single tee of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(ii) 110mm dia. | item132 | 957 | Each |
| 133 | 133 | Sipplying fitting and fixing PVC plain single tee of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(iii) 90 mm dia. | item133 | 946 | Each |
| 134 | 134 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trences.\n(ii) 110mm dia. | item134 | 803 | Each |
| 135 | 135 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trences.\n(iv) 75 mm dia. | item135 | 957 | Each |
| 136 | 136 | Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trences.\n(ii) 110mm dia. | item136 | 902 | Each |
| 137 | 137 | Supplying fiting and fixing PVC single ‘Y’ of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trences.\n(iv) 75 mm dia. | item137 | 1133 | Each |
| 138 | 138 | Supplying fiting and fixing PVC single ‘Y’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(ii) 110mm dia. | item138 | 1166 | Each |
| 139 | 139 | Supplying fiting and fixing PVC single ‘Y’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(iv) 75 mm dia. | item139 | 1166 | Each |
| 140 | 140 | Supplying fiting and fixing PVC double ‘Y’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trences.\n(ii) 110mm dia. | item140 | 957 | Each |
| 141 | 141 | Supplying fiting and fixing PVC double ‘Y’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trences.\n(iv) 75 mm dia. | item141 | 1243 | Each |
| 142 | 142 | Supplying fiting and fixing PVC double ‘Y’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trences.\n(ii) 110mm dia. | item142 | 869 | Each |
| 143 | 143 | Supplying fiting and fixing PVC double ‘Y’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trences.\n(iv) 75 mm dia. | item143 | 946 | Each |
| 144 | 144 | Sipplying fitting and fixing PVC cross'T' plain of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(iii) 110 mm x 110mm | item144 | 671 | Each |
| 145 | 145 | Supplying fiting and fixing PVC cross ‘T’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \n(a) In exposed surfaces or in trences.\n(iii) 110 mm x 110mm | item145 | 880 | Each |
| 146 | 146 | Sipplying fitting and fixing PVC coupler of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(iii) 110 mm dia. | item146 | 891 | Each |
| 147 | 147 | Sipplying fitting and fixing PVC coupler of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(ii) 75 mm dia. | item147 | 1331 | Each |
| 148 | 148 | Sipplying fitting and fixing PVC reducer of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(iii) 110 mm x 90mm | item148 | 935 | Each |
| 149 | 149 | Sipplying fitting and fixing PVC reducer of (Supreme / Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(vi) 90 mm x 75mm | item149 | 1056 | Each |
| 150 | 150 | Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\n(a) In exposed surfaces or in trences.\n(i) 160mm x 110 mm | item150 | 440 | Each |
| 151 | 151 | Supplying fiting and fixing PVC reducing Tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trenches as necessary complete at all levels including below G.L. as directed and specified.\n(i) 160mm x 110 mm | item151 | 110 | Each |
| 152 | 152 | Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified.\n(a) 110 mm | item152 | 1111 | Each |
| 153 | 153 | Supplying fiting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified.\n(b) 75 mm | item153 | 946 | Each |
| 154 | 154 | Supplying fiting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. in exposed surface or trences as necessary complete at all levels including below G.L. as directed and specified. \n(b) 110 mm | item154 | 1122 | Each |
| 155 | 155 | Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.\n(iii) 90mm dia. PVC cowel of ISI make | item155 | 352 | Each |
| 156 | 156 | Providing fitting & fixing C.P. Grating to the floors complete as directed and specified.\n(ii) 75mm dia. | item156 | 495 | Each |
| 157 | 157 | Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 58 Kg. weight complete as directed and specified. | item157 | 198 | Each |
| 158 | 158 | Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed. | item158 | 352 | Each |
| 159 | 159 | Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe\n(A)) Exposed or in trenches\nf) 50 mm nominal outer dia pipe | item159 | 3860.34 | Rm |
| 160 | 160 | Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe\n(A)) Exposed or in trenches\ne) 40 mm nominal outer dia pipe | item160 | 2750 | Rm |
| 161 | 161 | Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe\n(A)) Exposed or in trenches\nd) 32 mm nominal outer dia pipe | item161 | 3300 | Rm |
| 162 | 162 | Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe\n(B) Concealed pipe with cutting chases & making good the walls\nd) 32 mm nominal outer dia pipe | item162 | 1980 | Rm |
| 163 | 163 | Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe\n(B) Concealed pipe with cutting chases & making good the walls\nc) 25 mm nominal outer dia pipe | item163 | 4015 | Rm |
| 164 | 164 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified. (G.I. & C.P pipes will be measured separately) \nI) Essco make (Delux/Sumthing spl./Tropical) \n(a) Bib cock short body | item164 | 33 | Each |
| 165 | 165 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \nIV) Essco brand\n(b) Concealed stop cock heavy body casted cap 15mm\n | item165 | 99 | Each |
| 166 | 166 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified. (G.I. & C.P pipes will be measured separately) \n( II) Jaquar make\n(a) Continental / Clarion \n(ii) Bib cock long thread\n | item166 | 550 | Each |
| 167 | 167 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \n(I) Jaquar (a) Continental / Clarion \n(i) 15mm dia Male/Female (long thread) | item167 | 671 | Each |
| 168 | 168 | SSupplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \n(II) Jaquar make (b) Continental | item168 | 693 | Each |
| 169 | 169 | Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) \nIII) Essco brand\nb) Sink cock with \"U\" shape bend pipe | item169 | 66 | Each |
| 170 | 170 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately\n(A) Parryware Make \n(vi) Single Bowl (160 x 180) Flat Edge - Glossy \n(Cat.No.C8538) | item170 | 22 | Each |
| 171 | 171 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes\nIII) 1000 litre capacity (a) Sintex make | item171 | 22 | Each |
| 172 | 172 | Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) \nV) Jaquar brand\na) Continental / Clarion\ni) Sink cock with swinging casted spout | item172 | 264 | Each |
| 173 | 173 | Supplying fitting and fixing Chrome Plated (C.P.) flush cock of approved brand as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \n(III) Jaquar brand (a) Continental / Clarion \n(i) Flush cock with wall flange 25mm size with lever handle | item173 | 198 | Each |
| 174 | 174 | Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately)\n(III) Jaquar brand (a) Continental \n(iv) Overhead shower (ABS chrome plated) with rubit cleaning system | item174 | 176 | Each |
| 175 | 175 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately\n(A) Parryware Make\n(iv) Single Bowl (240 x 180) Flat Edge - Glossy (Cat.No.C8535) | item175 | 132 | Each |
| 176 | 176 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes\nIII) 1000 litre capacity (a) Sintex make | item176 | 33 | Each |
| 177 | 177 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes\nI) 2000 Lt capacity (a) Sintex make | item177 | 77 | Each |
| 178 | 178 | For deep tube well only for Rig boring/ DTS Boring inclusive of casing pipes and all accessories of pumps etc.\nc) 200mm diameter | item178 | 13200 | Rm |
| 179 | 179 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. completeShort point up to 3.00 metre. length. | item179 | 385 | Each |
| 180 | 180 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. completecomplete. Medium point up to 6.00 metre. Length. | item180 | 2475 | Each |
| 181 | 181 | Wiring for light/fan/call bell point with 3x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete complete.Long point up to 10.00 metre. Length. | item181 | 3850 | Each |
| 182 | 182 | Supplying including installation of socket outlet 6 Amps 3 pin universal combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | item182 | 1320 | Each |
| 183 | 183 | Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | item183 | 506 | Each |
| 184 | 184 | Supplying with fitting and fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | item184 | 286 | Each |
| 185 | 185 | Supplying with fitting and fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | item185 | 5500 | Each |
| 186 | 186 | Supplying with fitting and fixing of 16 amp one way modular clip in switch with LED, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | item186 | 660 | Each |
| 187 | 187 | Supplying with fitting and fixing of 6 amp two way modular clip in switch , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | item187 | 990 | Each |
| 188 | 188 | Supplying with fitting and fixing of electronic modular fan speed controller 2 - module type MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.100 watt electronic modular 4 step speed control 2 - module type | item188 | 1430 | Each |
| 189 | 189 | Supplying including fitting and fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved and as directed by the Department [ without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make)Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make | item189 | 1375 | Each |
| 190 | 190 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department.Trans Air 300 mm sweep (Crompton make) | item190 | 385 | Each |
| 191 | 191 | Supplying including fitting and fixing of following A.C. Wall fan in the wall of following sweeps with making necessary connection as approved by the Deptt. as required complete and as directed by the Department.(CROMPTON /ORIENT/Havells/USHA or equivalent make)Tornado Wall with metal blade 450 mm sweep | item191 | 66 | Each |
| 192 | 192 | Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.\nWith 3 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item192 | 3850 | Metre. |
| 193 | 193 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.\nWith 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item193 | 16500 | Metre. |
| 194 | 194 | With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item194 | 4950 | Metre. |
| 195 | 195 | With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item195 | 3850 | Metre. |
| 196 | 196 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.\nWith 4 x 4 sq. mm. + earth continuity with 2x2.5 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item196 | 3300 | Metre. |
| 197 | 197 | With 4x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item197 | 2200 | Metre. |
| 198 | 198 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system.\nWith 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item198 | 3080 | Metre. |
| 199 | 199 | With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | item199 | 2200 | Metre. |
| 200 | 200 | Supplying including fitting and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department.\n1-2 module type Metal | item200 | 264 | Each |
| 201 | 201 | Supplying including fitting and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. \n3 module type Metal | item201 | 803 | Each |
| 202 | 202 | 4-5 module type Metal | item202 | 187 | Each |
| 203 | 203 | 6-8 module type Metal | item203 | 605 | Each |
| 204 | 204 | 10 module type Metal | item204 | 880 | Each |
| 205 | 205 | 12-16 module type Metal | item205 | 220 | Each |
| 206 | 206 | Supplying including fitting and fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department.\n2 module | item206 | 132 | Each |
| 207 | 207 | 3 module | item207 | 792 | Each |
| 208 | 208 | 4 module | item208 | 77 | Each |
| 209 | 209 | 5 module | item209 | 110 | Each |
| 210 | 210 | 6 module | item210 | 165 | Each |
| 211 | 211 | 8 module | item211 | 440 | Each |
| 212 | 212 | 10 module | item212 | 880 | Each |
| 213 | 213 | 16 module | item213 | 220 | Each |
| 214 | 214 | Supplying with fitting and fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department. | item214 | 946 | Each |
| 215 | 215 | Supplying,installation,testing and Commission of the following indoor Surface Mounted and Suspended Luminaires LED Luminaires complete with all accessories such as driver etc. and necessary connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department \nPhilips 15 W Astra Surface & wall mounted LED batten Model BN150W LED13S-6500 PSE OD GR or equivalent as approved by the Deptt. | item215 | 660 | Each |
| 216 | 216 | Supplying,installation,testing and Commission cove light LED Wipro make. | item216 | 55 | mtr |
| 217 | 217 | Supplying, installation, testing and commissioning of the following indoor Decorative recessed typed mirror optics down lighter luminaries complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department 15W, BBS 170 1 X DLED 5000 PSU-WH Phillip make GREEN LED recessed mounted down lighter with latest LED technology. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) .. | item217 | 660 | Each |
| 218 | 218 | Supplying, installation, testing and commissioning of the following indoor Decorative recessed typed mirror optics down lighter luminaries complete with all accessories such as ballast, starter etc. In the false ceiling type Armstrong /Gypsum or similar ceiling mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department Philips model RC 380 B LED-25-6500/ 4000 PSE OD WH luminaries down lighter with latest LED technology or equivalent as approved by the Deptt.. | item218 | 99 | Each |
| 219 | 219 | Supplying with fitting fixing of surface & wall mounted LED luminaries complete with all accessories including driver directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department. Philips model LED Batten BN 550 WLED 6 3000/6500K or equivalent as approved by the Deptt. | item219 | 605 | Each |
| 220 | 220 | Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt.) as required Without Lamp | item220 | 1320 | Each |
| 221 | 221 | Supplying & fitting of 7 W LED lamp in the exixting batten holder/angle holder/decorative bracket/bulk head fitting/pendent holder etc.as specified and directed by the deptt.(as per present M.R.P) | item221 | 1320 | Each |
| 222 | 222 | Supply, installation & testing of G.I. Plate earth station with 600 mmx600 mmx6 mm heavy duty G.I. earth plate with necessary 40 mm dia. G.I. watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm hinged cover C.I. cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . | item222 | 286 | Each |
| 223 | 223 | Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt . | item223 | 374 | Each |
| 224 | 224 | Supplying & laying of 6 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | item224 | 5247 | Metre. |
| 225 | 225 | Supply, fitting & fixing of Lighting Finial Arrestor made of 25 mm dia 300 mm long solid Copper tube having 85 mm dia. single prong at top and 3 mm thick base plate at bottom complete with fitting & fixing with Brass nuts & bolts on roof, RCC slab, top of column etc. as specified and directed by the deptt. | item225 | 352 | Each |
| 226 | 226 | Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt. | item226 | 5500 | Metre. |
| 227 | 227 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door (IP-43) surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make)\n12 way SPN double door | item227 | 363 | Each |
| 228 | 228 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting vertical TPN MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way TPN (8+12) double door | item228 | 165 | Each |
| 229 | 229 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nB Series (Schneider MG, legrand, Hager make)\n6A | item229 | 1881 | Each |
| 230 | 230 | C Series\n(ABB, Schneider MG, legrand, Hager, Crabtree xpro make)\n6 to 32A | item230 | 957 | Each |
| 231 | 231 | Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n100/300mA sensitivity DP RCCB\n(ABB, Schneider MG, legrand, Hager make)\n40A | item231 | 363 | Each |
| 232 | 232 | Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor/wall mounting compartmentalize panel board of size 1.45M X 1.55MX 0.40M made of 16 SWG (1.66 mm) thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red Oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly wiring done with provision for one no 315A 4pole MCCB or Switch Fuse Unit as incomer and provision for 8nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items:\n1. 30mm X 5mm 4 strip copper Bus - Bar 1.45 M length each\nii) 20mm X 3mm 4 strip copper Bus-Bar 0.5M each 8sets \n2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no \n3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no \n4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue) - 3 nos \n5. Voltmeter & Ammeter Selector Switch - 2 nos\n6. 2 A Slide fuse unit - 3nos\n(Incoming & Outgoing Switch Gear of reqd. rating will be measured and paid separately) | item232 | 77 | Each |
| 233 | 233 | Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n25 KA 415V 50 Hz 4P MCCB \n(Schneider, legrand, Siemens, Indo Asian make) \n40A | item233 | 110 | Each |
| 234 | 234 | 63A | item234 | 110 | Each |
| 235 | 235 | Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n35/36 KA 415V 50 Hz 4P MCCB \n(Schneider, legrand, Siemens make)\n 400 A | item235 | 55 | Each |
| 236 | 236 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . \n3 & 1/2 Core A2XFY \n25.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | item236 | 4180 | Metre |
| 237 | 237 | 50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | item237 | 1375 | Metre |
| 238 | 238 | 120.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | item238 | 1375 | Metre |
| 239 | 239 | 400.00 Sq. mm.3 & 1/2 Core armoured U.G. cable | item239 | 1375 | Metre |
| 240 | 240 | Low side work (air side related to installation of duct able/packaged type air conditioners including the following work:\n GI Ducting as per approved drawing. The ducting will be made as per IS655. Only Tata and Sail Galvanised plain sheets will be used,\n Duct acoustic lining inside the firmst 4-5 metres of the duct using10mm open cell nit rile acoustic insulation sheet of Arm cell Microbar or equiv.\nDuct thermal insulation on the entire duct length using 12mm thick O class nit rile insulation (when the duct is passing through conditioned are \nWherever the duct is passing through unconditioned space, it will be insulated with 2 layers of 12mm thick O class nit rile insulation and then finally covered with Fibreglass Mat and 2 coats of UV paint be applied as finishing.\nAll air terminals will be provided with alum. Collar dampers & aluminium powder coated grills and diffusers. | item240 | 616 | Tr |
| 241 | 241 | Supplying installation testing and commissioning of 1000 W Halogen profile light consisting of 2 nos.150mm dia PC lenses, imported socket, ellipsoidal anodised alluminium reflector, 1000W halogen BipinT-11 lamp, yoke colour frame & suitable clamp Make: Canara Lighting | item241 | 44 | Nos |
| 242 | 242 | Supplying installation testing and commissioning of 1000W Planoconvex Spot Light complete with 1000W Halogen Bipin CP-41 lamp, G-38 base socket, spherical anodised reflector, 150 mm dia Planoconvex lens, rear sliding knob, yoke, colour frame & suitable clamp.Make: Canara Lighting | item242 | 44 | Nos |
| 243 | 243 | Supply, installation, testing & commissioning of Air cooled Ceiling Suspended Duct able Split type Air conditioners of following capacities suitable for refrigerant R22/R407C with outdoor unit consisting of hermetically sealed imported power efficient Scroll compressors, condenser coil and condenser fan and indoor unit consisting of evaporating coil, blower fan, motor & filter. Both cooling coil & condenser coil will be made up of copper-internally grooved with slit fins, anti corrosion blue fins along. The control system shall be microprocessor bases with following safety inbuilt: HP/LP cut-out, SPPR (protection against single phasing & reverse polarity) In-built thermal/temperature protection. Microprocessor controller is provided with following features: Auto switch on or off of compressors memory back up of settings\nAuto restart after power failure Runtime equalisation of the compressors\nBuilt-in time delay to protect compressors\nFault diagnostics to facility speedy correction \nThe cost of the machines will also include 20G hard drawn copper refrigerant piping properly saddles using wall spacers CPVC condensate drain piping including U Trap properly saddled, (Fire Retardant Canvas Cloth duct connection as approved by the Deptt., (Electrical interconnection between IDU & ODU using ISI marked cables in 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit properly saddled, ( Nitrogen pressure testing of refrigerant circuit, (Refrigerant Gas Charging ensuring optimum performance, etc complete in all respe CTs \"make)s Approved Bluestar, Voltas, Carrier, Hitachi, Daikin, Mitsubishi.\n5.5 Tr With twin compressor) | item243 | 44 | Each |
| 244 | 244 | 8.5 Tr With twin compressor) | item244 | 44 | Each |
| 245 | 245 | Rain Water Harvesting\nProviding, Fixing, testing &Commissioning of Rain water Hervesting system for 100 Sqm roof area with 110 mm uPVC pipe of Class-3 conforming to IS:4985-200 (with uptodate amendment) with extra UV ray protection by Titanium Dioxide(TiO2) directing the Rainwater to Rainy filter/Pop-up raintap filter (Excluding Civil Works) | item245 | 22 | Each |
| 246 | 246 | Providing, Fixing, testing &Commissioning of Rain water Hervesting system for 100 Sqm roof area with 180 mm uPVC Gutter of Class-3 conforming to IS:4985-200 (with uptodate amendment) with extra UV ray protection by Titanium Dioxide(TiO2) along the outer periphery of the GCI/Diana roof ,110 mm UPVC pipe directing the Rainwater to Rainy filter/Pop-up raintap filter (Excluding Civil Works) | item246 | 22 | Each |
| 247 | 247 | Supplying, fitting and fixing of Water storage tank ISI Marked, conforming to IS:12701/1996 (with uptodate amendment). (Excluding Civil Works) | item247 | 115500 | Ltr |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
