Construction Of 02 Nos . Hostel Blocks ( 3Rd Phase ) And Nursing College Hostel At Mgims/Khs , Sevagram ., Khs, Sevagram-Maharashtra

TDR : 24217597

Tender Notice
BOQ

Expired

Khs, Sevagram , Maharashtra

Tender Brief : Construction Of 02 Nos . Hostel Blocks ( 3Rd Phase ) And Nursing College Hostel At Mgims/Khs , Sevagram .

Document Fees
₹ 11800 /-

EMD
Refer document

Tender Value
₹ 11800.0 /-

Submission Date
21-05-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Construction of 02 Nos. hostel blocks (3rd Phase) and Nursing College Hostel at MGIMS/KHS, Sevagram
1	1	Civil Works for Medical Hostel
2	1.01	Excavation for foundation in earth, soil of all types, sand, gravel andsoft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means	item1	325	Cu.m
3	1.02	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.	item2	267.48	Cu.m
4	1.03	Filling in plinth and floors with ontractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.	item3	669.21	Cu.m
5	1.04	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.	item4	812.46	Sq.m
6	1.05	Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)	item5	113.72	Cu.m
7	1.06	Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)	item6	103.44	Cu.m
8	1.07	Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) PL+Ground floor	item7	46	Cu.m
9	1.08	First Floor	item8	26.26	Cu.m
10	1.09	Second Floor	item9	26.26	Cu.m
11	1.1	Terrace floor	item10	7.78	Cu.m
12	1.11	Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) PL+Ground floor	item11	124.24	Cu.m
13	1.12	First Floor	item12	77.4	Cu.m
14	1.13	Second Floor	item13	77.4	Cu.m
15	1.14	Terrace floor	item14	2.02	Cu.m
16	1.15	Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) PL+Ground floor	item15	86.54	Cu.m
17	1.16	First Floor	item16	96	Cu.m
18	1.17	Second Floor	item17	97	Cu.m
19	1.18	Terrace floor	item18	3.4	Cu.m
20	1.19	Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) PL+Ground floor	item19	1.4	Cu.m
21	1.2	First Floor	item20	1.4	Cu.m
22	1.21	Second Floor	item21	1.4	Cu.m
23	1.22	Terrace floor	item22	1.4	Cu.m
24	1.23	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.(TOTAL GROUND FLOOR+FIRST FLOOR+SECOND FLOOR+TERRAE)	item23	67.61	M.T.
25	1.24	Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.	item24	42.44	Cu.m
26	1.25	Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. Ground floor	item25	112.06	Cu.m
27	1.26	First Floor	item26	112.06	Cu.m
28	1.27	Second Floor	item27	113.06	Cu.m
29	1.28	Terrace floor	item28	78	Cu.m
30	1.29	Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. Ground floor	item29	538.4	Sq.m
31	1.3	First Floor	item30	538.4	Sq.m
32	1.31	Second Floor	item31	538.4	Sq.m
33	1.32	Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.	item32	705.34	Sq.m
34	1.33	Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.	item33	78	Cu.m
35	1.34	First Floor	item34	28.39	Cu.m
36	1.35	Second Floor	item35	28.39	Cu.m
37	1.36	Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground floor	item36	2500	Sq.m
38	1.37	First Floor	item37	2500	Sq.m
39	1.38	Second Floor	item38	2500	Sq.m
40	1.39	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground floor	item39	660.76	Sq.m
41	1.4	First Floor	item40	915.54	Sq.m
42	1.41	Second Floor	item41	915.54	Sq.m
43	1.42	ST. Tower+parapet wall	item42	705	Sq.m
44	1.43	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Ground floor	item43	50	Sq.m
45	1.44	First Floor	item44	50	Sq.m
46	1.45	Second Floor	item45	50	Sq.m
47	1.46	Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make (Nitco,Johnson, RAK, Kajariya) premium quality, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring Ground floor	item46	493.82	Sq.m
48	1.47	First Floor	item47	493.82	Sq.m
49	1.48	Second Floor	item48	493.82	Sq.m
50	1.49	Providing and laying Antiskid Ceramic tiles of approved quality (Nitco,Johnson, RAK, Kajariya) of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Ground floor	item49	28.4	Sq.m
51	1.5	First Floor	item50	28.4	Sq.m
52	1.51	Second Floor	item51	28.4	Sq.m
53	1.52	Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Ground floor	item52	254.6	Sq.m
54	1.53	First Floor	item53	254.6	Sq.m
55	1.54	Second Floor	item54	254.6	Sq.m
56	1.55	Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Ground floor	item55	1	Sq.m
57	1.56	First Floor	item56	1	Sq.m
58	1.57	Second Floor	item57	1	Sq.m
59	1.58	Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. Ground floor	item58	240.24	Sq.m
60	1.59	First Floor	item59	147.66	Sq.m
61	1.6	Second Floor	item60	147.66	Sq.m
62	1.61	Providing and fixing green marble of 18 to 20 mm thick On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete.(FOR TRADES, RISER & SILL) Ground floor	item61	43.3	Sq.m
63	1.62	First Floor	item62	43.3	Sq.m
64	1.63	Second Floor	item63	43.3	Sq.m
65	1.64	Providing edge Mirror polishing to Kota and Marble Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Staire and window sill) for all floors	item64	420	Rmt
66	1.65	Providing and applying two coats of exterior weather shield paint (Ace/Apex) of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete - FOR ALL FLOORS.	item65	3198	Sq.m
67	1.66	Providing and applying interior wall finish luster of Asian / Berger / Nerolac / Dulux Paints or equivalent make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean. Applying Asian / Berger / Nerolac / Duuex Paints or equivalent wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent Acrylic wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, Applying Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat of Asian / Berger / Nerolac / Dulux Paints or equivalent interior wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.)	item66	7796	Sq.m
68	1.67	Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm. Ground floor	item67	427.4	Rmt
69	1.68	First Floor	item68	448.3	Rmt
70	1.69	Second Floor	item69	469.5	Rmt
71	1.7	Providing, supplying and fixing in position Aluminium extruded section Three track sliding windows (Jindal make) upto 1.2 metre height (2 shutter of glass & one shutter of stainless steel mosquito net), outer frame made from section of over all size 80 mm x 45 mm, bottom section with or without drain section, track weighing 0.90 kg per metre and top and side section weighing 0.838 kg per running metre with shutter or sections made of 19 mm x 40 mm size having average weight of 0.6 kg per running metre(or as required size) with change in proportionate weight,with 5.00 mm selected quality plain sheet glass fixed with new neoprene gasket shutters to be provided with nylon encased stainless rollers, necessary locks and handles complete. Ground floor	item70	54.18	Sq.m
72	1.71	First Floor	item71	52.38	Sq.m
73	1.72	Second Floor	item72	52.38	Sq.m
74	1.73	Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Ground floor	item73	54.18	Sq.m
75	1.74	First Floor	item74	52.38	Sq.m
76	1.75	Second Floor	item75	52.38	Sq.m
77	1.76	Providing and fixing mild steel grill railing weighing 20 kg / sqm. with PVC handrail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete / other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing PVC handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, etc. complete. Spec. No. : As directed by Engineer in charge. Ground floor	item76	70.56	Sq.m
78	1.77	First Floor	item77	70.56	Sq.m
79	1.78	Second Floor	item78	70.56	Sq.m
80	1.79	Providing and fixing country teak wood frame of 150mm x 100mm second class doors with/without ventilators, windows & window's fan light and clear story windows including all mouldings, chamfering rounding and abating hold fast and finishing with 1 coat of primer etc. complete (For entrance door)	item79	0.19	Cu.m
81	1.8	Providing and fixing double leaf panelled door shutter C.C. T.W. vertical style & top rail size 100mmx35mm and bottom and lock rail 200mmx35mm in sertpanel 12mm thick commercial ply faced T.W.particle board with phenol formal dehyde syntheticres in (Generally confirming to ISI3097) excluding frame, including stainless steel fixtures fastening and T.W.beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete.	item80	6.93	Sq.m
82	1.81	Providing and fixing solid core flush door shutter in single leaf 32 mm thick (Green ply/Century ply) decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Ground floor	item81	125.66	Sq.m
83	1.82	First Floor	item82	131.88	Sq.m
84	1.83	Second Floor+tower	item83	138.6	Sq.m
85	1.84	Providing and fixing in position aluminium (jindal make) louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Ground floor	item84	6	Sq.m
86	1.85	First Floor	item85	6	Sq.m
87	1.86	Second Floor+tower	item86	6	Sq.m
88	2	Plumbing Works for Medical Hostel
89	2.01	Providing, laying & fixing position ultraviolet stabilized CPVC plumbing pipe (Supreme/Finolex) of specified outer diameter or required standard thickness conferming to I.S. 4985 including necessary fittings conferming to I.S. 7834 such as PVC bends, tees, reducer, clamps, plugs etc. including necessary excavation, trench filling, necessary drilling holes in walls, slab etc. and making good the surface complete (For 10kg/M2 pressure): (As per drawing) 15mm dia	item87	600	Rmt
90	2.02	25mm dia	item88	300	Rmt
91	2.03	40mm dia	item89	100	Rmt
92	2.04	Providing and fixing C.P. BIB cock 300 gram/400 gram weight symet type including necessary sockets, union nut, testing etc. complete (prior approval of sample by EIC is necessary before use ) Jal/ Jagwar Bib cock long body.	item90	24	Nos
93	2.05	Providing and fixing gun metal peet valve ' Leader' or equivalent I.S.I. approved. 15mm dia	item91	8	Nos
94	2.06	25mm dia	item92	8	Nos
95	2.07	Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.	item93	6	Nos
96	2.08	Providing and fixing 15 mm dia C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. \n	item94	24	Nos
97	2.09	Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.\n	item95	24	Nos
98	2.1	Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use)	item96	24	Nos
99	2.11	Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size 'Parryware/Cera/RAK' including cold water pillar tap/cold and hot water pillar tap (Jagwar make) brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.	item97	12	Nos
100	2.12	Providing and fixing 10 cm PVC nahani trap with grating etc. complete.	item98	48	Nos
101	2.13	Providing and fixing UPVC soil vent/waste swr pipe 'Supreame/Finolex' and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. 75mm dia	item99	120	Rmt
102	2.14	100 mm dia	item100	120	Rmt
103	2.15	160 mm dia	item101	200	Rmt
104	2.16	Providing and fixing 450mm x 550mm size superior type Belgium mirror (Saint Gobian/Modiguard) with 16mm dia. nickel plated towel rod etc. complete.	item102	12	Nos
105	2.17	Providing & fixing stainless steel soap dish chromium plated as per directed. (Prior approval of sample and brand by Ex. Engineer is necessary before use.)	item103	24	Nos
106	2.18	Providing and constructing Brick Masonry Inspection Chamber 90cm x 60cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete.\n	item104	20	Nos
107	2.19	Providing and fixing White Glazed Earthenware full stall type Urinal with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall.	item105	12	Nos
108	2.2	Providing and fixing 30cm x 30cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.	item106	10	Nos
109	2.21	Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.	item107	221.76	Sq.m
110	3	Electrification Work for Medical Hostel
111	3.01	Point wiring in PVC trunking (casing-capping) with 1.5sq.mm (2+1E) FR grade copper wire, flush type switch, earthingand required accessories as per specification No: WG-PW/SW	item108	428	Points
112	3.02	Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per pecification No: WGMA/BW	item109	2800	Rmtr.
113	3.03	Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW	item110	288	Points
114	3.04	Point wiring for independent plug in PVC trunking (casingcapping)\nwith 1.5 sq.mm (2+1E) FR grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW	item111	96	Points
115	3.05	Supplying and erecting flush type, shockproof plug socket 6 pin 6A and 16A with switch 16A combined unit erected on filled polypropylene board or double wooden block / 3mm thick hylam sheet / 4mm thick plywood asted with 1.5 mm thick sunmica with S M screws and duly connected.	item112	96	Points
116	3.06	Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FR PVC copper wire, in HMS PVC conduit min.20mm dia, as per specification No: WG-MA/PC.	item113	3200	Rmtr.
117	3.07	Supplying and erecting shockproof piano type switch 250 V 16 A, erected on filled polypropylene oard or polished double wooden/ folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Laminate with S M screws and duly connected.	item114	96	Nos.
118	3.08	Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) , on iron/ GI frame. (vertical busbar type) as per specification no. SW-WR/MCBDB1	item115	12	Nos.
119	3.09	Supplying, erecting & marking SPMCB 6A to 32A, B- series (for\nlighting) in provided distribution board as per specification no. SWSWR/MCB	item116	216	Nos.
120	3.1	Supplying erecting and marking triple pole isolators only switch version of miniature circuit breaker of 63A with required wiring connections and lugs etc. in provided distribution board complete.	item117	12	Nos.
121	3.11	Supplying & erecting mains with 4x6 sq.mm. and earth wire 4 sq.mm FR PVC copper wire, in HMS PVC conduit min. 25mm dia, as per specification No: WG-MA/PC.	item118	360	Rmtr.
122	3.12	Supplying and erecting triple pole metal clad switch and fuse 415V, 100A on angle iron / GI frame as per specification no. SWSWR/ MTP.	item119	2	Nos.
123	3.13	Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP	item120	4	Nos.
124	3.14	Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner	item121	10	kg
125	3.15	Supplying and erecting blanking plate of suitable size on MCB DB complete.	item122	48	Nos.
126	3.16	Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A complete as per specification no. CP-BB	item123	6	Nos.
127	3.17	Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board.	item124	96	Nos.
128	3.18	Labour charges for erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF.	item125	96	Nos.
129	3.19	Labour charges for erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete.	item126	176	Nos.
130	3.2	Labour charges for erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF.	item127	12	Nos.
131	4	Civil Works for Nursing Hostel
132	4.01	Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) ( Upto 1.5 M Depth)	item128	1238	Cubic Metre
133	4.02	Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from\n1.5m to 3.0m)	item129	495	Cubic Metre
134	4.03	Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.	item130	396	Cubic Metre
135	4.04	Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (Including Rubble soling quantity )	item131	2601	Cubic Metre
136	4.05	Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.	item132	2168	Square Metre
137	4.06	Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. PCC Below Footings	item133	54	Cubic Metre
138	4.07	PCC below Plinth Beam	item134	27	Cubic Metre
139	4.08	Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering\nuneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand ( For Grade Slab Work).	item135	171	Cubic Metre
140	4.09	Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.	item136	1748	Sq.M.
141	4.1	Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and Footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand	item137	283	Cubic Metre
142	4.11	Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. Column upto Plinth	item138	44	Cubic Metre
143	4.12	Ground Floor	item139	68	Cubic Metre
144	4.13	First Floor	item140	68	Cubic Metre
145	4.14	Terrace Floor	item141	19	Cubic Metre
146	4.15	Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. RCC Beams, Plinth Beams	item142	119	Cubic Metre
147	4.16	Ground Floor/ First Floor Roof	item143	88	Cubic Metre
148	4.17	First Floor / Second Floor Roof	item144	88	Cubic Metre
149	4.18	RCC Lintels, Ground Floor/ First Floor Roof	item145	10	Cubic Metre
150	4.19	First Floor / Second Floor Roof	item146	10	Cubic Metre
151	4.2	Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. Plinth Slab	item147	4	Cubic Metre
152	4.21	First Floor Slab	item148	190	Cubic Metre
153	4.22	Second Floor Slab	item149	215	Cubic Metre
154	4.23	Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. Plinth + Ground Floor	item150	5	Cubic Metre
155	4.24	First Floor	item151	9	Cubic Metre
156	4.25	Terrace Floor	item152	6	Cubic Metre
157	4.26	Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Upto Plinth	item153	32	Metric Tonne
158	4.27	Ground Floor/ First Floor Roof	item154	54	Metric Tonne
159	4.28	First Floor/ Second Floor Roof	item155	55	Metric Tonne
160	4.29	Providing second class Burnt Brick masonry with conventional/\nI.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.(Below Plinth Beam Brickwork)	item156	5	Cubic Metre
161	4.3	Providing second class Burnt Brick masonry with conventional/\nI.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. Ground Floor	item157	214	Cubic Metre
162	4.31	First Floor	item158	180	Cubic Metre
163	4.32	Terrace Floor	item159	46	Cubic Metre
164	4.33	Providing second class Burnt Brick masonry with conventional/\nI.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. (Wall thickness is 100 MM). Ground Floor	item160	1504	Square Metre
165	4.34	First Floor	item161	1774	Square Metre
166	4.35	Terrace Floor	item162	158	Square Metre
167	4.36	Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. (Qty including Floor Area only)	item163	1751	Square Metre
168	4.37	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. (Qty including Wall Area only)	item164	127	Square Metre
169	4.38	Proving water proofing in W.C and bath including brick bat coba in all positions including providing and laying 12 mm bedding in cement mortar 1:3 on vergin concrete slab with water proofing compound @ 1 kg/bag of cement laying brick bat coba of required thickness in cm 1:5 with water proofing compound 1kg/ bag of cement grouting and finishing the top layer with 20 mm thick brick bedding in CM mortyar 1:3 with nwater proofing compound 1 kg/ bag of cfement and testing the treated portion for 48 hrs. by pond test and covering ten gurantee on requisite stamp paper including curring etc. complete. (Qty including Floor Area only)	item165	92	Cubic Meter
170	4.39	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. (Qty including Wall Area only)	item166	357	Square Metre
171	4.4	Providing cement based water proofing treatment to Balcony (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. (Qty including Floor Area only)	item167	192	Square Metre
172	4.41	Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. (Qty including Wall Area only)	item168	117	Square Metre
173	4.42	Providing internal cement plaster 12mm thick in single coat in\ncement mortar 1:5 without neeru finish to concrete or brick\nsurfaces, in all positions including scaffolding and curing etc.\ncomplete. Ground Floor	item169	4602	Square Metre
174	4.43	First Floor	item170	4457	Square Metre
175	4.44	Terrace Floor	item171	333	Square Metre
176	4.45	Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of\n15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor to Terrace Floor	item172	4377	Square Metre
177	4.46	Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Ground Floor	item173	105	Running Metre
178	4.47	First Floor	item174	105	Running Metre
179	4.48	Second Floor	item175	105	Running Metre
180	4.49	Providing and laying vitrified mirror / glossy finish tiles\ndecorative type having size 590 mm to 605 mm x 590 mm to\n605 mm of 8 to 10 mm thickness and confirming to IS. 15622-\n2006 ( group Bla) of approved make, shade and pattern for\nflooring in required position laid on a bed of 1:4 cement mortar\nincluding neat cement float, filling joints, curing and clearing\netc. complete. a) Flooring, Ground Floor	item176	1080	Square Metre
181	4.5	First Floor	item177	1086	Square Metre
182	4.51	Providing and laying vitrified mirror / glossy finish tiles having\nsize 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm\nthickness and confirming to IS. 15622-2006 ( group Bla) of\napproved make, shade and pattern for flooring in required\nposition laid on a bed of 1:4 cement mortar including neat\ncement float, filling joints, curing and clearing etc. complete. b)Skirting, Ground Floor	item178	83	Square Metre
183	4.52	First Floor	item179	90	Square Metre
184	4.53	Providing and laying vitrified glossy or matt finish tiles\ndecorative type having size 590 mm to 605 mm x 590 mm to\n605 mm of 8 to 10 mm thickness and confirming to IS. 15622-\n2006 ( group Bla) of approved make, shade and pattern for\nflooring in required position laid on a bed of 1:4 cement mortar\nincluding neat cement float, filling joints, curing and clearing\netc. complete. Toilet Floor. a) Flooring, Ground Floor	item180	142	Square Metre
185	4.54	First Floor	item181	217	Square Metre
186	4.55	Passage Floor, Ground Floor	item182	398	Square Metre
187	4.56	First Floor	item183	355	Square Metre
188	4.57	Providing and laying vitrified glossy or matt finish tiles having\nsize 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm\nthickness and confirming to IS. 15622-2006 ( group Bla) of\napproved make, shade and pattern for flooring in required\nposition laid on a bed of 1:4 cement mortar including neat\ncement float, filling joints, curing and clearing etc. complete. Passage Skirting b)Skirting, Ground Floor	item184	24	Square Metre
189	4.58	First Floor	item185	30	Square Metre
190	4.59	Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. (Toilet Dado + Skirting). Toilet Dado - Ground Floor	item186	371	Square Metre
191	4.6	First Floor	item187	559	Square Metre
192	4.61	Kitchen Dado	item188	58	Square Metre
193	4.62	Providing and laying in position flooring of telephone black /\nAmba White / Cat bary brown / Ruby red / Ocean Brown\ngranite stone of approved shade and size 18 mm to 20 mm\nthick on bed 1:6 cement mortar including cement floats striking\njoints, pointing in C.M. 1:3 curing and cleaning etc. complete.	item189	171	Square Metre
194	4.63	Providing and fixing machine cut machine polished 18 mm to\n20 mm thick telephone black / Amba White / Cat bary brown /\nRBI red / Ocean Brown granite stone for treads and risers of\nsteps and staircases of approved colour and shade with\nrounded moulding and three grooved line for the treads on bed\nof 1:4 Cement mortar including float filling joints with neat\ncement slurry curing polishing and cleaning etc. complete.	item190	116	Square Metre
195	4.64	Providing and fixing heavy duty inter locking concrete\nColoured paving blocks of 40 mm thickness of having a\nstrength of 200 kg/Sq.cm. of approved quality and shape on a\nbed of crushed sand of 25 to 30 mm thick including skirting\njoints and cleaning etc. complete. Ground Floor	item191	615	Square Metre
196	4.65	Providing and applying two coats of exterior weather shield paint (Ace/ Apex) of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary	item192	4377	Square Metre
197	4.66	Providing and applying plastic emulsion paint of approved\nquality, colour and shade to old and new surfaces in two coats\nincluding scaffolding, preparing the surface. (Including the\nprimer coat)etc. complete.	item193	9164	Square Metre
198	4.67	Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . Ground Floor	item194	515	Running metre
199	4.68	First Floor	item195	614	Running metre
200	4.69	Terrace Floor	item196	11	Running metre
201	4.7	Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box	item197	64	Square Metre
202	4.71	Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.	item198	123	Square Metre
203	4.72	Providing and fixing 40mm diameter and 1.5mm thick Stainless\nsteel hand railing in S.S.304 Grade including fabricating ,fixtures,\nerrecting, necessary welding, grinding, finishing, buffing to\nstainless steel pipe etc. complete. (As per Design Provided)	item199	473	Running Meter
204	4.73	Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Ground Floor	item200	206	Square Metre
205	4.74	First Floor	item201	226	Square Metre
206	4.75	Second Floor	item202	5	Square Metre
207	4.76	Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Ground Floor	item203	26	Square Metre
208	4.77	First Floor	item204	33	Square Metre
209	4.78	Providing and preparing kitchen otta up to 75 cm width ,made\nup from 30 mm thick and 75 cm high vertical support for\nkadppa at 1 m. c/c of 25 mm thick both side polished kadappa\nmiddle shelf and bottom of 20 mm thick one side polished\nkadappa with facia patti of 20 x 50 mm kadappa including all\nmaterial labour cutting fixing with cement mortar and araldite\ncuring polished and cleaning etc. complete.	item205	17	Square Metre
210	4.79	Providing and applying Two coats of wall care Putty of 2mm\nthickness for plastered surface and 5-6mm thickness finished\nconcrete surface to Ceiling and Walls to prepare surface even\nand smooth of Brands\nBIRLA WHITE, BERGER, BISION, J.K., make, etc complete.\nb) For finished concrete walls/ceiling 5 to 6mm	item206	2978	Square Metre
211	4.8	Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon)\nwith COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050\nmm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anticapillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval.\nIncluding fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete.(weight of profile 4.52 kg/sqm)	item207	52	Square Metre
212	4.81	Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections\nand one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.	item208	1	Metric Tonne
213	4.82	Providing and fixing mild steel grill gate as per the detailed\ndrawing including hinges, locking arrangements and painting in\nthree coats of oil paint of approved colour and shade etc.\ncomplete.(weight 18 kg. to 20 kg. Per Sq.m.)\nSpec.No.: As directed by Engineer- in-charge.	item209	107	Square Metre

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Maharashtra Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of 02 Nos . Hostel Blocks ( 3Rd Phase ) And Nursing College Hostel At Mgims/Khs , Sevagram ., Khs, Sevagram-Maharashtra

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of 02 Nos . Hostel Blocks ( 3Rd Phase ) And Nursing College Hostel At Mgims/Khs , Sevagram ., Khs, Sevagram-Maharashtra

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us