| 1 | 1 | Dismantling asbesots cement (corrugated, semi-corrugated etc) sheets in roof coverings Complete all as specified and directed. | ITEM NO-1 | 620 | Sqm |
|---|
| 2 | 2 | Dismantling timber scantling 40 Sqcm and over in section, in any position of framed work all as directed | ITEM NO-2 | 2 | Cum |
|---|
| 3 | 3 | Dismantling timber scantling 40 Sqcm and over in section, in any position of unframed work all as directed | ITEM NO-3 | 2 | Cum |
|---|
| 4 | 4 | S&F in repairs solid PVC wall lining consisting of 5 mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per spd and drawing | ITEM NO-4 | 120 | Sqm |
|---|
| 5 | 5 | S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specficiation and drawing. | ITEM NO-5 | 120 | RM |
|---|
| 6 | 6 | S & F rolled mild steel work in tubular trusses incl necessary welding/fabrications complete all as specified and directed | ITEM NO-6 | 1450 | Kgs |
|---|
| 7 | 7 | S & F gusset plates, rails, braces and angle section etc incl necessary welding drilling for fixing etc all as specified and directed | ITEM NO-7 | 40 | Kgs |
|---|
| 8 | 8 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or 'J' / 'L' hooks all as specified and directed. | ITEM NO-8 | 440 | Sqm |
|---|
| 9 | 9 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as ridges, gutters and facia etc fixed with self tapping screws or 'J' / 'L' hooks all as specified and directed. | ITEM NO-9 | 20 | Sqm |
|---|
| 10 | 10 | S&F fibre glass 2 mm reinforced translucent corrugated sheeting with two corrugations side lap ficed with coach screw and washer in roof, wall etc fixed with L-type of J-type or cranked hook bolts complete all as specified and directed. | ITEM NO-10 | 180 | Sqm |
|---|
| 11 | 11 | S&F for suspended false ceiling using anodised GI exposed ceiling suspension system of grid size 60 cm x 60 cm width main runner 'T\" section of size 38 mm x 24 mm x 0.4 mm thickness and wall angle of size 24 mm x 24 mm x 0.3 mm thickness and cross Tee of size 24 mm x 24 mm x 0.43 mm thick (using 60 cm x 60 cm E board classic 4 mm thick ceiling board ) to be placed in a grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustement clip providing position for light fixtures, air conditioning dufuser and ducks, sprinkler, smoke detector etc. The main runner to be secured to structrural soffit by hanger @ 1220 mm maximum C/C. The last hanger at the end of each runner should not be placed at more than 450 mm from the adjacent wall. Flush fitting 1200 mm cross 'T\" to be inter locked between main runner @ 610 mm C/C so asto form 600 mm x 600 mm grid complete all as directed including taking down of old existing ceilings. | ITEM NO-11 | 340 | Sqm |
|---|
| 12 | 12 | S&F IInd class hardwood in scantling timber unframed work and fixed wrought in any position and in sny situation complete all as specified and as directed. | ITEM NO-12 | 1 | Cum |
|---|
| 13 | 13 | Demolition of brick work built in cement mortar complete all as specified and directed | ITEM NO-13 | 8 | Cum |
|---|
| 14 | 14 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified. | ITEM NO-14 | 8 | Cum |
|---|
| 15 | 15 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed. | ITEM NO-15 | 40 | Sqm |
|---|
| 16 | 16 | Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key and scrubbing down with water etc complete all as specified and as directed. | ITEM NO-16 | 40 | Sqm |
|---|
| 17 | 17 | M & L for GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding and welded with angle iron frame incl all laps, cutting and waste | ITEM NO-17 | 40 | Sqm |
|---|
| 18 | 18 | M & L for rendering 15 mm thick on one side of lathing finished fair & even in CM (1:4) complete all as specified and as directed.\n | ITEM NO-18 | 40 | Sqm |
|---|
| 19 | 19 | M & L for rendering 10 mm thick on other side of lathing finished fair & even in CM (1:4) complete all as specified and as directed. | ITEM NO-19 | 40 | Sqm |
|---|
| 20 | 20 | M & L for 15 mm thick rendering in CM (1:4) on fair faces of brick wall or concrete surface finished fair & even without using extra cement complete all as specified and as directed. | ITEM NO-20 | 80 | Sqm |
|---|
| 21 | 21 | M & L for rendering 15 mm thick on Brick wall finished fair & even in CM (1:6) complete all as specified and directed. | ITEM NO-21 | 70 | Sqm |
|---|
| 22 | 22 | M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. | ITEM NO-22 | 120 | Sqm |
|---|
| 23 | 23 | Preparing new plastered surfaces and applying two coats of oil bound distemper over chalk whiting on on plastered and other services,preparatory to distempering on walls | ITEM NO-23 | 110 | Sqm |
|---|
| 24 | 24 | Taking down chowkat with shutters of any decsription without takingoff shutters from frame area exc 1.50 Sqm but not exc 4.00 sqm | ITEM NO-24 | 10 | Each |
|---|
| 25 | 25 | Taking down chowkat with shutters of any decsription without takingoff shutters from frame area not exc 1.50 sqm each | ITEM NO-25 | 10 | Each |
|---|
| 26 | 26 | Taking down shutter of any description n. exc 1.00 Sqm each complete all as specified and as directed. | ITEM NO-26 | 10 | Per Leaf |
|---|
| 27 | 27 | Taking down shutter of any description exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed. | ITEM NO-27 | 10 | Per Leaf |
|---|
| 28 | 28 | Refixing door shutter exc 1.00 Sqm and n exc 2.00 Sqm each complete all as specified. | ITEM NO-28 | 5 | Each |
|---|
| 29 | 29 | S&F for second class hard wood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete as making good to wall all as specified. | ITEM NO-29 | 1 | Cum |
|---|
| 30 | 30 | S&F framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework or water tanks and similar work confiriming to Fe 290 Gde-E-165. Complete all as specified and directed. | ITEM NO-30 | 120 | Kg |
|---|
| 31 | 31 | S&F for 35mm thick IInd class hard wood, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. | ITEM NO-31 | 10 | Sqm |
|---|
| 32 | 32 | S&F 35mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided in square with plain, chamfered or rounded mitred and rebated sash bars any number, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, complete all as specified in SSR Part I section 8, clause 8.24 (a) fitted to chowkat complete all as specified and directed. | ITEM NO-32 | 10 | Sqm |
|---|
| 33 | 33 | S&F steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including guard bars/grills and necessary arrangements to fixed with wdn scantling/supports etc. | ITEM NO-33 | 20 | Sqm |
|---|
| 34 | 34 | S&F steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including guard bars/grills and necessary arrangements to fixed with wdn scantling/supports etc. | ITEM NO-34 | 20 | Sqm |
|---|
| 35 | 35 | S&F steel ventilators with top hung shutters including hinges steel peg stay, complete without glazing bars, dovetailed or welded including guard bars/grills. | ITEM NO-35 | 5 | Sqm |
|---|
| 36 | 36 | M&L Flush shutter solid core construction, with black board core 30 mm thick and plywood face panels commercial type on both side. | ITEM NO-36 | 10 | Sqm |
|---|
| 37 | 37 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and as directed. | ITEM NO-37 | 65 | RM |
|---|
| 38 | 38 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joint together with solvent cement, complete all as specified and as directed. | ITEM NO-38 | 15 | Sqm |
|---|
| 39 | 39 | S&F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks, or galvanised wire staples. stainless steel wire staples. | ITEM NO-39 | 10 | Sqm |
|---|
| 40 | 40 | S&F in repairs galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks, or galvanised wire staples. stainless steel wire staples. | ITEM NO-40 | 20 | Sqm |
|---|
| 41 | 41 | S & F 4mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane complete all as specified and directed. | ITEM NO-41 | 5 | Sqm |
|---|
| 42 | 42 | S & F in repairs 3mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane complete all as specified and directed. | ITEM NO-42 | 10 | Sqm |
|---|
| 43 | 43 | S&F for 200 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed. | ITEM NO-43 | 45 | Each |
|---|
| 44 | 44 | S&F for 100 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed. | ITEM NO-44 | 45 | Each |
|---|
| 45 | 45 | S&F 150 mm long anodised aluminium handles, cast type complete all as specified and as directed. | ITEM NO-45 | 60 | Each |
|---|
| 46 | 46 | S&F 100 mm long anodised aluminium handles, cast type complete all as specified and as directed. | ITEM NO-46 | 60 | Each |
|---|
| 47 | 47 | S&F 100 mm butt hinges medium weight cold rolled mild stel and fixed. | ITEM NO-47 | 60 | Each |
|---|
| 48 | 48 | S&F 75 mm butt hinges medium weight cold rolled mild stel and fixed. | ITEM NO-48 | 20 | Each |
|---|
| 49 | 49 | S&F 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. | ITEM NO-49 | 15 | Each |
|---|
| 50 | 50 | S&F MS 300 mm, ordinary rat rail tail, rod pattern springs, including roller and roller plate (Helical door spring) complete all as specified. | ITEM NO-50 | 5 | Each |
|---|
| 51 | 51 | S & F in repairs water closet (Squatt Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor. | ITEM NO-51 | 5 | Each |
|---|
| 52 | 52 | S & F in repairs PVC High/Low level flushing cistern 10 litrescapacity including all fittings i.e. float valve, syphon, flushpipe,brackets all as specified and directed by Engr-in-Charge. | ITEM NO-52 | 5 | Each |
|---|
| 53 | 53 | S & F PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as specified and directed by EIC. | ITEM NO-53 | 10 | Each |
|---|
| 54 | 54 | S& F in repairs bib taps CP brass fancy type with crutch or butterfly handle screwed down screwed for iron pipe for brass ferrule 15 mm dia . | ITEM NO-54 | 10 | Each |
|---|
| 55 | 55 | S&F in repair stop valves cast copper alloy, screwed down, high pressure with butterfly handle, screwed both ends for iron pipe or for unions 15mm bore. | ITEM NO-55 | 10 | Each |
|---|
| 56 | 56 | S&F in repairs PVC (SWR) floor trap, 75 mm size plain with grating including jointing with solvent cement complete all as specified. | ITEM NO-56 | 5 | Each |
|---|
| 57 | 57 | S&F tubes 15 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified including taking up or down steel tubing and connections including cleaning for re-fixing or removal to store. | ITEM NO-57 | 80 | RM |
|---|
| 58 | 58 | S&F tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified including taking up or down steel tubing and connections including cleaning for re-fixing or removal to store. | ITEM NO-58 | 40 | RM |
|---|
| 59 | 59 | Cutting chases pinning in, making good to facing where required & pointing in CM 1:3 for concealed water tubing not exc 10CM girth in brick wall, complete all as specified and as directed. | ITEM NO-59 | 10 | RM |
|---|
| 60 | 60 | S&F in repair vitreous china wash hand basin, (white), flat back of size 550x400 mm with and including two CI brackets, brass chromium plated incl waste coupling fittings and PVC waste pipe complete all as specified and as directed. | ITEM NO-60 | 5 | Each |
|---|
| 61 | 61 | S& F in repairs 15 mm size fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. | ITEM NO-61 | 5 | Each |
|---|
| 62 | 62 | S&F in repair 600 x 450 mm and 5 mm thick bevelled edge mirror of selected quality glass mounted on 6 mm thick commercial ply wood and fixed wooden plugs with CP brass screws and cup washers complete all as specified and directed. | ITEM NO-62 | 5 | Each |
|---|
| 63 | 63 | M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. | ITEM NO-63 | 100 | Sqm |
|---|
| 64 | 64 | M&L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | ITEM NO-64 | 50 | Sqm |
|---|
| 65 | 65 | M&L for post construction Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 Litres per metre incl drilling and plugging holes etc in apron complete all as specified and as directed | ITEM NO-65 | 80 | RM |
|---|
| 66 | 66 | M&L for post construction Anti termite treatment of soil under existing floors using chemical emulsion @ one litres per hole,300mm apart including drilling and plugging 12 mm dia holes with CM(1:2) to match the existing floors complete all as specified and as directed | ITEM NO-66 | 50 | Sqm |
|---|
| 67 | 67 | M&L for post construction Anti termite treatment Of voids in masonry using chemical emulsion @ one litres per hole,300mm intervals incl drilling holes at 45 degree and replugging them with CM 1;2 to match the existing of floors complete all as specified and as directed | ITEM NO-67 | 80 | RM |
|---|
| 68 | 68 | M&L for post construction Anti termite treatment at point of contact of wood wash by chemical emulsion (in or kerosine based salution) @ 0.5 ltr/holes by drilling 6 mm dia holes at a down and angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and as directed | ITEM NO-68 | 80 | RM |
|---|
| 69 | 69 | Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thick (below or above ground level) | ITEM NO-69 | 13 | Cum |
|---|
| 70 | 70 | Providing 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded aggregate ) as in floors finishing the cement concrete surface even and smooth without using extra cement complet all as specified and directed. | ITEM NO-70 | 80 | Sqm |
|---|
| 71 | 71 | Glass dividing strips 3 mm thick 38 mm wide, inserted in position, confirm to disign. | ITEM NO-71 | 35 | RM |
|---|
| 72 | 72 | M&L Providing 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded aggregate ) as in plinth protection complete all as specified and directed. | ITEM NO-72 | 65 | Sqm |
|---|
| 73 | 73 | M&L 75mm thick PCC type B-2, 1:2:4 (using 40 mm graded aggregate) as in path hardstanding . Complete all as specified and directed. | ITEM NO-73 | 50 | Sqm |
|---|
| 74 | 74 | M&L for PCC (1:4:8) type D2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. | ITEM NO-74 | 4 | Cum |
|---|
| 75 | 75 | M&L for PCC (1:2:4) type B1 using 20 mm graded aggregate for bearing/ bed plates, copings,kneelers,apex stones,kerb stones etc incl weathering,slightly rounded or chamfered angles and throating complete all as specified and directed | ITEM NO-75 | 2 | Cum |
|---|
| 76 | 76 | Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified. | ITEM NO-76 | 185 | Sqm |
|---|
| 77 | 77 | M&L glazed coloured ceramic tiles of size 450 x 300 x 7 mm thick on vertical surfaces, set and jointed in neat cement slurry and poited with white cement to match the coloured tiles including 15 mm thick rendering in M 1:6 for verticl sub base. | ITEM NO-77 | 75 | Sqm |
|---|
| 78 | 78 | M&L non skid cermic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floor etc and jointed in neat cemnt slurry and pointed in white cement or coloured cement to match the shade of tile over and includig 15 mm thick screed bed layer in CM (1:6) al as spd and directed. | ITEM NO-78 | 40 | Sqm |
|---|
| 79 | 79 | M&L non skid cermic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces like skirting/dado and jointed in neat cemnt slurry and pointed in white cement or coloured cement to match the shade of tile over and includig 15 mm thick screed bed layer in CM (1:6) al as spd and directed. | ITEM NO-79 | 5 | Sqm |
|---|
| 80 | 80 | M&L Vitrified ceramaic tiles 10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed layer in CM (1;6) all as pd and as directed. | ITEM NO-80 | 60 | Sqm |
|---|
| 81 | 81 | M&L Vitrified ceramaic tiles 10 mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces like dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed layer in CM (1;6) all as pd and as directed. | ITEM NO-81 | 5 | Sqm |
|---|
| 82 | 82 | M&L PCC (1:2:4) type B-1, (Using 20 mm graded aggregates) 25 mm thick complete all as specified and directed. | ITEM NO-82 | 40 | Sqm |
|---|
| 83 | 83 | Taking down carefully existing bituminous felt including plaster lime or concrete of any thickness, and cleaning of the surface of roofs, terrace including flushing and junction of parapets, kerb walls, PCC fillets benching etc. with wire brushes and removing of rubbish outside ministry of defence land of any lead of complete all as specified and directed. | ITEM NO-83 | 540 | Sqm |
|---|
| 84 | 84 | M&L for rendering 10mm thick on existing concrete surfaces of roof in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finishing even and smooth to receive water proofing treatment complete without using extra cement all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid for separately. | ITEM NO-84 | 540 | Sqm |
|---|
| 85 | 85 | M&L a coat of applied bituminius primer over cleaned surface @ 0.30 Ltr per sqm and over one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/ Sgm over bituminius primer then followed by APP modified five layer polymeric mambrane 3 mm thick minimum weight 3.6 Kg per Sqm reinfored with polyster non woven fabric (weighting not less than 150 gm per sqm) manufactured by M/S STP LTD or its equivelant or IWL laid as per the manufacturer's instruction with side over lap of 75 mm and end over lap of 100 mm and applying one coat of polymeric modified bitumen 85/25 @ 1.20 Kg per Sgm complete all as specified and directed. | ITEM NO-85 | 540 | Sqm |
|---|
| 86 | 86 | Supply only integral water proofing coumpound. | ITEM NO-86 | 180 | Kgs |
|---|
| 87 | 87 | M&L for closing bolt holes, etc., in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6 mm GI bolts and nuts, all set in stiff white lead, bolt n exc 25 mm in length complete all as specified and directed. | ITEM NO-87 | 24 | 100 Nos |
|---|
| 88 | 88 | M&L for closing bolt holes or other similar holes in old Asbestos cement sheets by sealing with one bitumen and one plain GI washer on either side and 8 mm dia bolt and nut, bolt not exceeding 25 mm in length complete all as specified and directed. | ITEM NO-88 | 20 | 100 Nos |
|---|
| 89 | 89 | Schedule 'A' Part II \nSchedule of credit | ITEM NO-89 | | |
|---|
