}

Supply Of Stores For Security Fence, DHRANGADHRA-Gujarat

Indian Army-IA has published Supply Of Stores For Security Fence. Submission Date for this Tender is 09-06-2020. Bags Supply Tenders in DHRANGADHRA Gujarat. Bidders can get complete Tender details and download the document.




Tender Notice

24139574
Corrigendum : Supply Of Stores For Security Fence
Open Tender
Indian
Gujarat
DHRANGADHRA
09-06-2020

Tender Details

Supply Of Stores For Security Fence- ( I ) Structural Steel Post Of Angle Iron 60 X 60 X 5Mm, 3.6M Long As Per Is 2062-1984, Including Fabrication Of 0.75M Long Top Portion For Swan Neck At 30 Degree To Vertical, Including Making Six Round Holes Of 15Mm Dia On Vertical Posts For Fixing Of Nuts And Bolts And Three Nos Of 15Mm Dia Holes For Fixing Strut And Four Nos Notches On The Swan Neck ( As Shown In Drg ) And Welding Of Two Nos Of 16Mm Ms Rod Each Of 0.23 Mtr Length To Bottom End Of Picket For Anchorage Including One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint For Exposed Surface Of Angle Above Gl Complete And Two Coats Of Bituminous Paint Embedded Portion Of Angle 0.45M. Make Of Steel : Jindal / Sail / Tata / Rinl. ( Ii ) Structural Steel Joint Angle Iron 60 X 60 X 5Mm, 3.70 Mtr Long, Weight As Per Is 2065-1984+B12 Including Fabrication For Strut Post Bending At Top Portion Including Making Three Nos Hole Of 15Mm Dia Including 0.23 Mtr 16Mm Dia Ms Rod Two Piece To Be Welded At Bottom For Anchoring Purpose Including One Coat Of Red Oxide Primer And Two Coats Of Synthetic Enamel Paint For Exposed Surface Of Angle Above Gl And Two Coats Of Bituminous Paint For Exposed Surface Of Angle Above Gl And Two Coats Of Bituminous Paint For Stud 0.45 Mtr Below Gl For One Side Of The Post. Make Of Steel : Jindal / Sail / Tata. ( Iii ) Galvanised Two Strand Steel Barbed Wire ( Line Wire ) 20000 Rm Of 2.24Mm Diameter Of Wire, Barb At 75Mm Spacing. The Barbs Are ( Point Wire ) 02Mm Thick Wire Shall Be Isi Marked As Per Is:278 Of 1978 ( Third Revision ) With Amdt No 1 To 4. The Points Of Barbs Shall Be Sharp. The Line And Point Wires Shall Be Circular In Section Free From Scales And Point Wires Shall Be Circular In Section Free From Scales And Defects And Shall Be Uniformity Galvalium. The Barbed Wire Shall Be Manufactured As Per Clause 11.2.1 And 11.2.2 Respectively Of Is Specification Cited Above Read With Is 4826 / 79 ( First Revision ) 37.00 Kg Per Boundle. ( Iv ) Galvanised Steel Chain Link Fence Fabric Of Mesh Size 125Mm X 125Mm ( + / - ) 4Mm Of 4.00Mm Nominal Diameter. The Size Of Chain Link Fence Fabric Shall Be 2.4 Mtr X 15 Mtr Mesh Wire. Galvalium Chain Link Shall Be Manufacture As Per Is 4823. ( V ) Ms Flat Of 40 X 3 Mm, 2.4 M Long With 6 Holes Of 15Mm Dia, All As Per Drg Including One Coat Of Red Oxide Primer And Two Coats Of Syntheic Enamel Paint. 3.02 Kg Per Flat. Make Of Steel : Jindal / Sail / Tata / Rinl . ( Vi ) Mild Steel Bolts With Hexagonal Head At One End And Screwed The Other End Fitted With One Nut And Two Washers. The Bolts Shall Be 12Mm Dia And 50Mm Long. Vii ) Ms Round Bars 10Mm Dia With Hook On Sides Made To Shape Including Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer. Viii ) Ordinary Portland Cement 53 Grade / Ppc In Hdpe Bags Of 50 Kgs Each, As Per Is 383-1978 ( Make : Ambuja / Ultratech / Acc ) ( Ix ) Steel Main Gate. Steel Gate 5.5 Mtr Wide With 02 Nos Of Gate Pillar Made Of Rcc Of Size 500X 400Mm Complete All As Shown In Drg At Sketch ‘R’ And ‘S’ And Specification At As Per Technical Specification Of Part – Iv Of Rfp. ( Alongwith Reinforcement ) ( X ) Wicket Gate. Steel Gate 1.20 Mtr Wide With 02 Nos Of Gate Pillar Made Of Rcc Of Size 300X 200Mm Complete All As Shown In Drg At Sketch ‘R’ And ‘T’ And Specification At As Per Technical Specification Of Part – Iv Of Rfp. ( Alongwith Reinforcement ) ( Xi ) Coarse Sand As Per Is 383-1978 Xii ) Grade Stone Aggregate 20Mm As Per Is 383-1978 Xiii ) Gi Binding Wire 1.2Mm Dia Xiv ) Lime ( Chuna ) Xv ) Erection Tools Of Security Fence ( As Per Para 1 ( B ) Of

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 17-Apr-2020 Corrigendum No 01 Date 04-05-2020
2 02-May-2020 Corrigendum No 02 Date 20-05-2020
3 19-May-2020 Corrigendum No 03 Date 03-06-2020
4 27-May-2020 Corrigendum No 04 Date 09-06-2020
5 03-Jun-2020 Corrigendum No 05 Other 09-06-2020
6 04-Jun-2020 Corrigendum No 06 Other 09-06-2020

Key Value

Document Fees
Refer document
EMD
INR 194865.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail