Road And Building Department-RBD has published Construction Of 2 Two Nos Of Twin D Type Quarters For Revenue Officers At Paralakhemundi At Lic Colony Civil , Ei And Ph Under State Plan 2019-20 Building Works. Submission Date for this Tender is 18-04-2020. Building Work Tenders in Paralakhemundi Odisha. Bidders can get complete Tender details and download the document.
| Name of Work: "Construction of 2 (Two) nos of Twin ‘D’ Type Quarters for Revenue Officers at Paralakhemundi at L.I.C Colony. (Civil, EI & PH) under State Plan 2019-20" | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation in hard soil or gravelly soil of foundation with all leads & lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with dressing and levelling the bed and depositing the excavated earth at places away from work site and stacking of useful materials near by the work site with all leads and lifts including cost of all labour and T&P for the works etc. complete as directed by the Engineer-in-charge. | 746.52 | One Cum | |
| 2 | 2 | Supplying & filling in foundation & plinth with sand in 23.5cm(9”) thick layers including watering & ramming with cost, conveyance, royalties, taxes of the materials & labour with T&P required for the work etc.,complete as per direction of Engineer-in-Charge. (Measurement will be taken on finished compacted section only) | 157.72 | One Cum | |
| 3 | 3 | Cement concrete of prop.(1:3:6) in foundation up to lowest bed level using hard black granite crusher broken metal of size 4cm down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge. | 148 | One Cum | |
| 4 | 4 | Cement concrete of prop.(1:1.5:3) in foundation up to lowest bed level using hard black granite crusher broken metal of size 12mm down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge. | 57.96 | One Cum | |
| 5 | 5 | Fly ash brick masonry in cement mortar (1:6) in F&P using Fly ash bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.\nGround Floor | 292.76 | One Cum | |
| 6 | 6 | Earth work in filling in foundation and plinth with excavated materials within initial lead of 50.00mtr. & initial lift of 1.5 mtr. including cost of all labour T&P, watering and ramming as directed by the Engineer-in-Charge | 248.84 | One Cum | |
| 7 | 7 | R.C.C.work of Grade M-20 having a minimum compressive strength in work test of 200kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 & IS 516 using 20mm down graded size black crusher broken hard granite stone chips of approved quality & from approved quarry including hoisting, lowering & laying concrete & compacting by using vibrators, watering & curing for 4 (four) weeks centring, shuttering & finishing the exposed surface smooth providing grooves or beads where necessary including cost & conveyance royalties & taxes of all materials & labour required for the work etc., complete in all respect but excluding cost & conveyance of M.S.Rods or tor steel and binding wires of 18 to 20 gauge & labour charges for straightening, cutting, bending etc.,of the HYSD Rods or tor steel & binding wires & laying the grills placing in proper position as per direction of Engineer-in-Charge.\nRCC Column Foundation\n\n | 136.4 | One Cum | |
| 8 | 7.01 | RCC Plinth Beam\n | 38.92 | One Cum | |
| 9 | 7.02 | RCC Column Superstructure\nGround Floor | 33.88 | One Cum | |
| 10 | 7.03 | First Floor | 2.72 | One Cum | |
| 11 | 7.04 | RCC Lintel\nGround Floor | 10.56 | One Cum | |
| 12 | 7.05 | First Floor | 1.96 | One Cum | |
| 13 | 7.06 | RCC Chajja\nGround Floor | 53.52 | One Sqm | |
| 14 | 7.07 | RCC Roof Beam\nGround Floor | 46 | One Cum | |
| 15 | 7.08 | RCC Roof Slab\nGround Floor | 58.32 | One Cum | |
| 16 | 7.09 | RCC Shelves\nGround Floor | 50.16 | One Sqm | |
| 17 | 7.1 | RCC Stair Case\nGround Floor | 6.16 | One Cum | |
| 18 | 8 | Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment) \nGround Floor | 431.44 | One Qntl | |
| 19 | 8.01 | First Floor | 7.2 | One Qntl | |
| 20 | 9 | 2.5 cm (1") thick grading Concrete in proportion (1:2:2) using 6mm size c.b.h.g chips approved quality from approved quarry over roof slab including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. \nAll Floor | 440 | One Sqm | |
| 21 | 10 | Supplying, fitting, fixing of MS Angles for roof purlines & trusses using require size of angles including cost of nuts and boulds, and fixing etc complete with cost of all materials and labour & T & P etc complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.\n | 945.12 | One KG | |
| 22 | 11 | Supplying, fitting, fixing of GCI sheet coloured (Durashine colour coated) in roof including fixing of ridges, wind ties J-hooks G.I. And limpet washers, bolts and nuts drilling in wind ties with all T&P etc. complete (including cost of GCI / AC sheet and all other materials required therein) with all labour T&P etc. complete with all taxes. | 66.88 | One Sqm | |
| 23 | 12 | Fly ash brick masonry in cement mortar (1:6) in Superstructure using Fly ash bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.\nGround Floor | 226.44 | One Cum | |
| 24 | 12.01 | First Floor | 82.28 | One Cum | |
| 25 | 13 | 16mm thick cement plaster (1:6) finished smooth to inside 9''/10'' thick brick walls after raking out the joint including watering, curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. \nGround Floor | 863.64 | One Sqm | |
| 26 | 14 | 12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour with T& P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. \nGround Floor\n | 1831.64 | One Sqm | |
| 27 | 14.01 | First Floor | 325.72 | One Sqm | |
| 28 | 15 | 6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge.\nGround Floor\n\n | 370.56 | One Sqm | |
| 29 | 16 | Providing supplying fitting and fixing of Tiles in Floors on 20 mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.\nVitrified Tiles (600x600 mm) | 333.8 | One Sqm | |
| 30 | 17 | Providing supplying fitting and fixing of Tiles in Dadoo on 12 mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.\nGround Floor\nVitrified Tiles (600x600 mm) | 148.44 | One Sqm | |
| 31 | 18 | Providing, and fixing plain Gypsum board ceiling suspended from roof by adjustable GI sealing angle with spread at a distance not more then 600mm fix to roof by rowl plug and stiff cleat, Gypsum board 12.5 mm thick held by GI perimeter channel MF-6 and GI cealling section MF-5 and intermediate channel MF-7, fraining, boarding, jointing and finishing with special type of gypsum compound etc including cost of material all taxes labour T&P etc, complete as per direction of Engineer-in-charge.\nGround Floor\n | 207.36 | One Sqm | |
| 32 | 19 | Supplying, fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors, windows and ventilators including cost of iron works and coal taring 2 coats to wall side faces of choukaths including cost of coaltar, cutting grooves and mending sizes where necessary with cost and conveyance royalities and taxes of all materials and labour with T&P required for the work etc complete in all respect in all floors.\nGround Floor | 0.96 | One Cum | |
| 33 | 20 | Supply,fitting and fixing W.I Clamps including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge\nGround Floor | 144 | Each | |
| 34 | 21 | Supplying, fitting and fixing of 32 mm thick Flush doors made out of 32 mm thick Block Board of approved quality including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge \n(All Floor) | 45.16 | One Sqm | |
| 35 | 22 | Providing and fixing M.S Panelled Door single leaved shutter with MS frame overall size including frame 1830 mm ht. x 910 mm width made out of the following materials conforming to relevant ISS frame 30x30x5 mm MS angle shutter style top & bottom rail 25x25x3 mm MS angle Door pannel: 1.0 mm CR sheet Panel stiffener covering width of leaf 19x5 mm MS flat - 3 nos Hinges size-100mm 3 nos bought out as per ISS Hold fast:-30x30x5 mm MS angle 150 mm length bifrucated at the tip 3 nos on each side Handle:- 19x5 mm MS flat fabricated -2 nos Aldrop - 2 nos bought out as per ISS tower Bolt:- 2 nos bought out as per ISS, Approcimate weight - 36.5 kg | 344.4 | One KG | |
| 36 | 23 | Providing and fixing M.S Panelled Window double leaved shutter with MS frame & Grill overall size including frame 1220 mm height x 910 mm width made out of the following materials conforming to relevant ISS frame 35x35x6 mm MS angle shutter style top & bottom rail 25x25x3 mm MS angle Window panel: 1.0 mm CR sheet Panel stiffener covering width of each leaf 19x5 mm MS flat - 2 nos on each leaf Hinges size-100mm 4 nos (2 nos on each side) bought out as per ISS Hold fast:-35x35x6 mm MS angle 100 mm length bifrucated at the tip 2 nos one each side Handle:- 19x5 mm MS flat 2 nos fabricated (inside) tower Bolt:- 4 nos bought out as per ISS, Horizontal Grills- 12 M.S Round at 100 mm spacingApprocimate weight - 39 kg | 260 | One KG | |
| 37 | 24 | Supplying, fitting, fixing of all types of MS Grills / Gates/Door/Windows made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. | 2136.25 | One KG | |
| 38 | 25 | Painting Two coats with any approved Synthetic Enamel paint to Wood works over a coat of primer including sand papering, polishing the surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.\nGround Floor | 105.36 | One Sqm | |
| 39 | 26 | Painting Two coats with any approved Synthetic Enamel paint to Iron works over a coat of primer including sand papering, polishing the surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.\nGround Floor | 80.44 | One Sqm | |
| 40 | 27 | Supplying, fitting, fixing up window (sliding type) made up aluminium section 9778 as windows frame, section no. 4095, 4096 and 9777, 3994 as shutter frame with arrangement of 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fittings including cost of material all taxes labour T&P etc, complete as per direction of Engineer-in-charge. Excluding cost of glass | 343.68 | One KG | |
| 41 | 28 | Supplying, Fitting, fixing of 5 mm thick Black Glass Pan for glass shutters etc. complete with beading, iron fittings and putty as required, including cost, conveyance, royalities and taxes of all materials and labour with T&P required for the work etc., complete in all respect as per direction of Engineer-In-Charge. | 75.81 | One Sqm | |
| 42 | 29 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustarde of Size 32mmx32mmx2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification buffing polishing etc. including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge\n | 384 | One KG | |
| 43 | 30 | Providing, and finishing wall and ceiling surface with water based wall putty including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete.\nInside surface | 1234.2 | One Sqm | |
| 44 | 31 | Providing and painting Two coats with Plastic emulsion paint on plaster surface of approved shade on new works to give an even shade including scaffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. \nInside Surface\n | 1234.2 | One Sqm | |
| 45 | 32 | Providing and painting One coat with wall primer(water bound) on plaster surface of approved shade on new works to give an even shade including scaffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. \nOut Side Surface\n | 2210.88 | One Sqm | |
| 46 | 33 | Providing two coats with Weather coat paint on plaster surface of approved shade on new works to give an even shade including scaffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. \nOut Side Surface\n | 2210.88 | One Sqm | |
| 47 | 34 | E.I Works\nRecessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard) \nGroup-A -L.P-32 F.P- C.B.P- | 32 | Point | |
| 48 | 34.01 | Group-B L.P-36 F.P-20 C.B.P- | 56 | Point | |
| 49 | 34.02 | Group-C L.P-24 F.P- 12 C.B.P-4 | 40 | Point | |
| 50 | 35 | Supply and fixing of 3 pin 6Amp plug with 6Amp switch on existing board (Modular type ) | 28 | Each | |
| 51 | 36 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection (make-Anchor/ Legrand /Roma) | 16 | Each | |
| 52 | 37 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (make-Anchor/ Legrand /Roma) | 24 | Each | |
| 53 | 38 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard) 2 X 2.5sq.mm +1 X 1.5sqmm | 320 | Mtr. | |
| 54 | 38.01 | 2 X 4sq.mm +1 X 1.5sqmm. | 180 | Mtr. | |
| 55 | 38.02 | 2 X 6sq.mm +1 X 2.5sqmm. | 60 | Mtr. | |
| 56 | 39 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . | 20 | Each | |
| 57 | 40 | Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required | 4 | Each | |
| 58 | 41 | Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required Standard earthing as per Govt. spcn. | 4 | Each | |
| 59 | 42 | Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator) 2 + 8 WAY | 4 | Each | |
| 60 | 43 | Supply and fixing of 5Amp to 32A rating 240V "B/C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) Single pole (SP) | 32 | Each | |
| 61 | 44 | Supply and fixing of following rating double pole 240 V isolator in the existing MCB DB ISI marked complete with connection testing and commissioning etc. as required. 63 Amp | 4 | Each | |
| 62 | 45 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993 ) of following capacity on existing surface/wall mounting and completer with HRC fuse links, interconnections, earthing etc. as required (Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK) 63Amp ICDP main switches with MS board | 4 | Each | |
| 63 | 46 | Supply and fixing of different type of fitting with lamp 18 watt LED T-5 fitting( Make-Bajaj/ Philips /Crompton) | 44 | Each | |
| 64 | 47 | S/F of 45 W LED street light fitting (Make-Havels/Philips/Bajaj) | 8 | Each | |
| 65 | 48 | S/F of 15Watt LED Square surface mount fitting (Make-Havells/Philips/C&S/Crompton) | 64 | Each | |
| 66 | 49 | Supply and fixing of 9Watt LED Lamp (Philips/ Havells/ AnchorBajaj) | 20 | Each | |
| 67 | 50 | S/Fof B.H fitting CFL/LED type complete (Bajaj/Philips with lamp | 16 | Each | |
| 68 | 51 | S/F of Gate/ Lawn light fitting with 40W LED as luminarie (Make-Bajaj/ Philips / Crompton/ Havells) | 4 | Each | |
| 69 | 52 | Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard) S/F of 48" Ceiling fan Alluminium Body, Copper winding, High speed ceiling fan (Make-Crompton Model-Jura, Polycab (Model Vital, Polar Model Winpro) etc. | 20 | Each | |
| 70 | 53 | Exhaust fan 10"/12" size | 12 | Each | |
| 71 | 54 | supply of PVC armored cable ISI marked (make- polycab/KEI/glowstar) 4 sq mm 2 core Aluminium | 70 | mtr | |
| 72 | 55 | S/F of PVC T/C U.B almn. Wire with No.10/12SWG G.I supporting wire 4mm2 Almn. Wire | 120 | Mtr | |
| 73 | 56 | S/F of No.8 G.I wire as earth continuity | 20 | Kg | |
| 74 | 57 | Supply and fixing of Modular fan regulator, cll bell push, TV Socket Outlet(Cona/ Anchor/ Usha/Bajaj) Electronics step type Regulator (Modular type) | 20 | Each | |
| 75 | 58 | Supply and fixing of Modular switch ,Socket , T.V Socket and Telephone socket etc. Call bell push Modular type | 4 | Each | |
| 76 | 59 | TV Socket outlet modular type | 4 | Each | |
| 77 | 60 | Supply and drawing of following size PVC insulated single core multistrand copper conductor in existing surface/ recessed/ STEEL / conduit as required. 1 X 1.5sqmm | 320 | Mtr. | |
| 78 | 61 | PH Works \nSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor IS marked galvanised mild steel tubes (medium grade) confirming to IS: 1239/1990, part-1 of the following nominal bore, tube fittings and clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.\nIn ground floor\n25 mm dia G.I pipe | 50 | Mtrs. | |
| 79 | 61.01 | 32 mm dia G.I pipe | 45 | Mtrs. | |
| 80 | 62 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.\nIn ground floor\n20 mm CPVC pipes | 40 | Mtrs | |
| 81 | 62.01 | 25 mm CPVC pipes | 42 | Mtrs | |
| 82 | 63 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of E.I.C.\n250 mm thick wall in GF | 16 | Each | |
| 83 | 64 | supplying all materials, labour, T&P and cutting holes in R.C.C. floors, roofs, erc. up to 19 Cm. thick for passing G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. and reparing the holes after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of E.I.C.\nIn ground floor | 12 | Each | |
| 84 | 65 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.\nIn ground floor | 76 | Mtr | |
| 85 | 66 | Supplying all materials, labour, T&P and painting two coats with white enamel paint brushing interior over one coat of priming with red oxide zinc chrome primer on the external surface of new galvanised mild steel tubes and fittingfs of following nominal diameter to give an even shade including preparing the surface and cleaning the surface of all dirt, dusts and foreign matters as per direction of the E-I-C\nIn ground floor\n25mm to 32 mm dia | 95 | Mtr | |
| 86 | 67 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.\n15mm dia Cp Long body bib cock (Jaquar/Kingstone) | 20 | Each | |
| 87 | 67.01 | 15mm dia CP angle stop cock(Jaquar/Kingstone) | 16 | Each | |
| 88 | 67.02 | 20mm dia CP concealed stop cock (Jaquar/Kingstone) | 8 | Each | |
| 89 | 67.03 | 15mm dia CP Pillar cock(Jaquar/Kingstone) | 8 | Each | |
| 90 | 67.04 | 25mm dia brass or gun metal full way valve(shakti make) | 10 | Each | |
| 91 | 67.05 | 32mm dia brass or gun metal full way valve(shakti make) | 4 | Each | |
| 92 | 67.06 | 15mm dia CP Flange | 44 | Each | |
| 93 | 67.07 | 15mm dia CP Extention Nipple | 44 | Each | |
| 94 | 67.08 | 125mm CP grating | 20 | Each | |
| 95 | 68 | Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishing all complete as per specification and direction of the Engineer in charge\n15mm dia CP revolving shower with 15mm x 225mm long size CP shower arm | 8 | Each | |
| 96 | 69 | Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701--1996 including cutting holes through the tank and fixing mild steel ltubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class Fly ash.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in cement concrete (1:2:4) using 12mm size h.g.chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. \n2000 litre capacity water storage tanks on roof of GF | 2 | Each | |
| 97 | 70 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. \nIn ground floor\n110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme) | 60 | Mtr | |
| 98 | 70.01 | 75mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme) | 40 | Mtr | |
| 99 | 70.02 | 110mm U-PVC door Tee | 12 | Each | |
| 100 | 70.03 | 110mm U-PVC offset | 16 | Each | |
| 101 | 70.04 | 110mm U-PVC door bend | 8 | Each | |
| 102 | 70.05 | 110mm U-PVC plain shoe bend | 8 | Each | |
| 103 | 70.06 | 110mm U-PVC cowl | 8 | Each | |
| 104 | 70.07 | 110mm P-trap | 12 | Each | |
| 105 | 70.08 | 75mm U-PVC plain Tee | 8 | Each | |
| 106 | 70.09 | 75mm U-PVC plain bend | 12 | Each | |
| 107 | 71 | Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer in charge.\n250mm to 375mm thick wall | 20 | Each | |
| 108 | 72 | Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge\n10 Liters capacity PVC cistern with 32mm dia flush bend(Parryware/Hindware/Neycer/Rak) | 8 | Each | |
| 109 | 73 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge.\n580mm size Orissa pan(Parryware/Hindware/Neycer/Rak) | 4 | Each | |
| 110 | 74 | Supplying all materials,labour,T&P and fixing the following vitreous china wash down water closet(European type W.C.pan) with integral 'P' or 'S' trap to the fllor with wooden plugs and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar(1:1)fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc.all complete as per specification and direction of the Engineer-in-charge.\nEuropean water closet with 'P' trap plain (Parryware/Hindware/Neycer/Rak) | 4 | Each | |
| 111 | 75 | Supplying all materials,labour, T&P and fixing laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs,screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge.\n600mmx450mmx200mm size Stainless steel Sink | 4 | Each | |
| 112 | 76 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks (Plaza make)and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge\n550mmx400mm W.H.basin with porcelain pedestal | 8 | Each | |
| 113 | 77 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge.\n600mmx450mm size B.E.mirror | 8 | Each | |
| 114 | 78 | Supplying all materials, labour, T&P and fixing standard size glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge\n 600mmx125mm glass shelf with CP/NP guard rails | 8 | Each | |
| 115 | 79 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge\n25mmx600mm long CP towel rail | 8 | Each | |
| 116 | 80 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge\nCP soap holder | 12 | Each | |
| 117 | 81 | Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge.\nShutter - | 12 | Sqmt | |
| 118 | 82 | Supplying all materials, labour, T&P and filling in foundaton and plint with sand well watered and rammed including conveyeance of all materials to worksite,payment of royalty, taxes etc all complete as per direction of the Engineer in charge. | 7.56 | Cum | |
| 119 | 83 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 40mm H.G metal including watering, curing and conveyance of all materials to site.\nIn ground floor - | 2.52 | Cum | |
| 120 | 84 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C.\nIn ground floor - | 1.26 | Cum | |
| 121 | 85 | Supplying all materils, labour, T&P providing ceramic tile in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement 1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer-in-charge(size 30x30cm,Kajaria/Somany/Johnson/Orient Bell make to be pre-approved by the EIC).\nIn ground floor - | 25.2 | Sqmt | |
| 122 | 86 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork inclding watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge\nIn ground floor - | 114.96 | Sqmt | |
| 123 | 87 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(size 45x30cm,Kajaria/Somany/Johnson/Orient Bell make to be pre-approved by the EIC).\nIn ground floor | 114.96 | Sqmt | |
| 124 | 88 | Supplying all materials, labour, T & P and constructing Gully trap chamber of the following inside size with 8 cm thick R.C.C. precast cover slab in CC (1:2:4) mix using 12mm size h.g. chips, foundation concrete (1:4:8) using 40mm size h.g. metal on bed aound trap , Fly ash. brickwork in CM ( 1:6) in P&F and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mm x100mm size gully trap, 150mm x150mm C.I gratig etc. all complete as per aproved drawing , specification and direction of Engineer in charge \n250mmx250mm with RCC cover | 12 | Each | |
| 125 | 89 | Supplying all materials, labour, T & P and constructing Inspection chamber of the following inside size with CC (1:3:6) mix using 40mm size h.g. metal on bed, Ist class Fly ash. brickwork in CM ( 1:6) , moulding and shaping the channel inside and benching with CC (1:2:4) using 12mm size h.g. chips, 12mm thick cement plastering (1:3) finished with punning to inside , cement flush pointing (1:3) to outside , R.C.C. cover slab in ( 1:2:4) using 12mm size h.g. chips with RCC man hole cover , earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering ,curing, conveyance of all materials to worksite , payment of royality , taxes etc. all complete as per aproved drawing , specification and direction of Engineer in charge \nInside size 760mm x760mm x460mm | 8 | Each | |
| 126 | 90 | Sinking of 200mm dia Tube Well 2 Nos through DTH Rig.\nLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only\nDrilling of 200mm dia bore 0mtr to 45mtr | 90 | Mtr | |
| 127 | 90.01 | Drilling of 150mm dia bore 46mtr to 121mtr | 150 | Mtr | |
| 128 | 91 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.\nLowering of 200mm dia GI/P.V.C/MS casing pipes 0 mtr to 30 mtrs | 90 | Mtr | |
| 129 | 92 | Cost of 200mm dia P.V.C schedule-80 pipe | 91 | Mtr | |
| 130 | 93 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge\nBy DTH/Rotary Rig | 2 | Each | |
| 131 | 94 | Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).\nSanitary sealing upto 5mtrs below ground level. | 2 | Each | |
| 132 | 95 | CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing. | 0.4 | Cum | |
| 133 | 96 | Supplying all materials, labour, tools and plant and withdrawing casing pipesfrom the unsuccessful bore etc.\nWithdrawal of casing pipes | 90 | Mtr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
