| 1 | 1 | Excavation in foundation in ordinary soil (Loam, Clay or sand) Including lift up to 1.50 m and lead up to 30 m and Including, filling watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30mtr. From the foundation trenches. (including Royalty) Excluding GST [SI. No. 251 /PWD SOR 2018] | BI01010001010000000000000515BI0100001113 | 807 | Cum. |
|---|
| 2 | 2 | Concrete with 40mm gauge approved stone ballast, coarse sand and cement in proportion of 8:4:1 including supply of all materials, labour, T&P etc. required for proper completion of the work. Excluding GST. [SI.No. 281/PWD SOR2018.] | BI01010001010000000000000515BI0100001114 | 51 | Cum. |
|---|
| 3 | 3 | RCC work with cement, approved Coarse sand and 20mm gauge stone grit in proportion of 1:1.5:3 in R.C.C. Raft foundation and footings excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work, including cost of binding wire. Excluding G.S.T.[S.I.No. 287A / PWD SOR2018] | BI01010001010000000000000515BI0100001115 | 171 | Cum. |
|---|
| 4 | 4 | RCC work with cement, approved Coarse sand and 20mm gauge stone grit in proportion of 1:1.5:3 in R.C.C. Columns excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work, including cost of binding wire. Excluding G.S.T.[S.I.No. 289/ PWD SOR2018] | BI01010001010000000000000515BI0100001116 | 80 | Cum. |
|---|
| 5 | 5 | RCC work with cement, approved Coarse sand and 20mm gauge stone grit in proportion of 1:1.5:3 in lighter beam having spans upto 6 M excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc. required for proper completion of the work, including cost of binding wire. Excluding G.S.T.[S.I.No. 285/ PWD SOR2018] | BI01010001010000000000000515BI0100001117 | 72 | Cum. |
|---|
| 6 | 6 | Class M-150 brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all material, labour T&P etc. required for proper completion of the work. Excluding GST[SI.No. 303 + 307A -307)/ PWD SOR2018] | BI01010001010000000000000515BI0100001118 | 71 | Cum. |
|---|
| 7 | 7 | Class M-150 class brick work in 1:6 cement and coarse sand mortar in super structure for one brick wall including supply of all material, labour T&P etc. required for proper completion of the work.Excluding GST [SI.No. 303 + 307A -307+309+310 )/ PWD SOR2018] | BI01010001010000000000000515BI0100001119 | 235 | Cum. |
|---|
| 8 | 8 | Class M-150 class brick work in 1:4 cement and coarse sand mortar in super structure for half brick wall including supply of all material, labour T&P etc. required for proper completion of the work.Excluding GST [SI.No. 305+ 307A -307+309+310+310A )/ PWD SOR2018] | BI01010001010000000000000515BI0100001120 | 109 | Cum. |
|---|
| 9 | 9 | Extra for Brick Work in plain Arches in super structure. (DAR 6.9-Item 8above) | BI01010001010000000000000515BI0100001121 | 188 | Cum. |
|---|
| 10 | 10 | M.S (Tor steel or plain) work in plain work such as RCC or RB work including bending for proper shape and including supply of steel and its wastage, bend, hooks and authorized over lapping shall be measured and including cost of binding wire. Excluding GST [ S.I No. 504/ PWD SOR2018] | BI01010001010000000000000515BI0100001122 | 38034 | Kg |
|---|
| 11 | 11 | 12mm thick cement plaster with 1:4 cement and approved coarse sand mortar over brick work minimum thickness not to be less than 1cm including supply of all material, labour, tools and plants etc, required for proper completion of the work as per direction of Engineer-in-charge.Excluding GST.[ S.I No. 597 (C) +diff of C.sand & F.sand/ PWD SOR2018] | BI01010001010000000000000515BI0100001123 | 6707 | Sqm |
|---|
| 12 | 12 | Add. For extra labour and materials for plaster over rough face of one brick wall.Excluding GST [ S.I No. 597 (E) / PWD SOR2018] | BI01010001010000000000000515BI0100001124 | 3354 | Sqm |
|---|
| 13 | 13 | Finishing walls with water proof cement paint of approved make and quality on new wall with Three coats to give an even shade including supply of all materials ,labour, Tools and plants etc. required for proper completion of the work.Excluding GST [S.I No.660+661 / PWD SOR2018] | BI01010001010000000000000515BI0100001125 | 6707 | Sqm. |
|---|
| 14 | 14 | Dismantling lime or cement mortar brick work including stacking of dismantled materials with in 60m distance as directed by Engineer - in- charge.[S.I No.692/ PWD SOR2018] | BI01010001010000000000000515BI0100001126 | 476 | Cum. |
|---|
| 15 | 15 | Earth work in cutting in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M in depth and earth work in embankment to be in 20cm layers including ramming & dressing the surface to required level & slopes and also including 1.50M lift and 30 M lead the earth from cutting to be used in making embankment or to be deposited as spoil bank within 30 Mtr. distance as directed by E/I.[S.I No.253/ PWD SOR2015] | BI01010001010000000000000515BI0100001127 | 9600 | Cum. |
|---|
| 16 | 16 | Extra to item no. 15 above for every additional 30mtr lead or part of 30 mtr Or for every additional 1.50 mtr lift or part of 1.50 mtr . (3 Leads) [S.I No.254/ PWD SOR2018] | BI01010001010000000000000515BI0100001128 | 9600 | Cum. |
|---|
| 17 | 17 | P/F 75mm dia PVC pipes of 6kg/cm2 pressure including PVC plain & brass threaded fittings i/c trenching, refilling: (External wak): 75 mm nominal OD pipes (Based on DAR 18.9.8/ 2016) | BI01010001010000000000000515BI0100001129 | 4730 | Rmt |
|---|
| 18 | 18 | Supply and Fixing of Quick Coupling Valve for Irrigation system made of Aluminium having self closing spring loded brass valve, powder coated finish and hinged thermo plastic lid (Make -Harvel/ Acutech/ Raimbird/ Globe/ Harit or equivalent.) (Approved Rate) | BI01010001010000000000000515BI0100001130 | 158 | No. |
|---|
| 19 | 19 | Transportation of Rig machine & other eqipments including Loading & unloading (PSR) | BI01010001010000000000000515BI0100001131 | 1 | job |
|---|
| 20 | 20 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil : 400 mm dia (DAR 23.1.1.3) | BI01010001010000000000000515BI0100001132 | 180 | Rmt |
|---|
| 21 | 21 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings& accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia (DSR/23.3.2) | BI01010001010000000000000515BI0100001133 | 180 | Rmt |
|---|
| 22 | 22 | Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads& lifts, all complete as per direction of Engineer -in-charge. (DSR/23.7) | BI01010001010000000000000515BI0100001134 | 20 | Cum. |
|---|
| 23 | 23 | Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. (DSR/23.12) | BI01010001010000000000000515BI0100001135 | 96 | Hrs |
|---|
| 24 | 24 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150 mm dia (DSR/23.13.2) | BI01010001010000000000000515BI0100001136 | 2 | No. |
|---|
| 25 | 25 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp (DSR/23.14.2) | BI01010001010000000000000515BI0100001137 | 2 | No. |
|---|
| 26 | 26 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 150 mm dia (23.15.2) | BI01010001010000000000000515BI0100001138 | 2 | No. |
|---|
| 27 | 27 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore.(DSR 18.17.6 ) | BI01010001010000000000000515BI0100001139 | 2 | No. |
|---|
| 28 | 28 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work. 80 mm dia. nominal bore. (DSR 18.12.8 ) | BI01010001010000000000000515BI0100001140 | 90 | Rmt |
|---|
| 29 | 29 | Supply ,Fixing, testing and commissioning of 5 HP KSB (Cora) make submersible pump for 200 lit/min discharge at 50 meter head with control panel, support wire etc complete. for erection and lowering of submersible pump, 80 mm dia GI column pipe, 3 core submersible copper cable upto the control panel, supporting clamps, cable clips, pressure gauge, connection line and all other accessories required for the proper completion of the work. Including cost of pump pannel required 3 core PVC insulated submersible cable. (from pump panel to submersible. (PSR) | BI01010001010000000000000515BI0100001141 | 2 | No. |
|---|
| 30 | 30 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1000 bolts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. (PWD 501/ Electrical) 10.00 Sqmm 4 Core (501 h ) | BI01010001010000000000000515BI0100001142 | 4500 | Rmt |
|---|
| 31 | 31 | 25.00 Sqmm 3-1/2 Core /(4 Core) (501 j) | BI01010001010000000000000515BI0100001143 | 500 | Rmt |
|---|
| 32 | 32 | 95.00 Sqmm 3 -1/2 Core (501 n) | BI01010001010000000000000515BI0100001144 | 500 | Rmt |
|---|
| 33 | 33 | Concrete with 40mm gauge approved stone ballast, coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour, T&P etc. required for proper completion of the work. Excluding GST. [SI.No. 279(A)/PWD SOR2018.] | BI01010001010000000000000515BI0100001145 | 46 | Cum. |
|---|
| 34 | 34 | Providing and laying 40 mm thick gang saw cut Leather Finish (Flamed finish over Mirror Polish) Granite stone flooring, , machine cut for Flooring complete at all levels and locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing and polishing to give high gloss.(Based on DAR-8.2.2.2 ) | BI01010001010000000000000515BI0100001146 | 50 | Sqm. |
|---|
| 35 | 35 | Supply & Fixing of ISI marked 80mm thick mechnically compressed inter locking cement concrete paver's block manfactured by high pressure & controlled vibration machine with minimum 5mm thick topping of DP cement mixed with 25% marble powder. The compressive strength of concrete paver blocks shall not be less than 30MPa including cost of all materials ,labour, Tools and plants etc. required for proper completion of the work as directed by E/Ic . In Red base colour. Excluding GST (PWD Approved Rate) | BI01010001010000000000000515BI0100001147 | 450 | Sqm. |
|---|
| 36 | 36 | Labour Charges for fixing of existing M.S. Railing [SI.No. 10.08 New Item /PWD SOR2018.] | BI01010001010000000000000515BI0100001148 | 610 | Sqm. |
|---|
| 37 | 37 | Fabrication of Railing for footpath comprising of Steel work in built up tubular (round, square or rectangular) hollow tubes etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. :Hot finished seamless type tubes ( Based on DAR10.16.2) | BI01010001010000000000000515BI0100001149 | 3185 | Kg |
|---|
| 38 | 38 | Providing & Fixing decorative Bollards made of cast iron of approved shape, average 200mm dia, 730 mm high Weighing approximate 38Kg each complete in all respect including fixing by Carben Steel galvanised dash fastner of size Size 10 mm x 120 mm. (M.R. +DAR 10.27.3) | BI01010001010000000000000515BI0100001150 | 100 | No. |
|---|
| 39 | 39 | Providing & Fixing Cast Iron Benches as per approved design.(PSR) | BI01010001010000000000000515BI0100001151 | 200 | No. |
|---|
| 40 | 40 | Providing & Fixing Stainless Steel Dust Bins of approved make and design. (PSR.) | BI01010001010000000000000515BI0100001152 | 100 | No. |
|---|
| 41 | 41 | Providing & fixing of Signages made of sand stone as per Drawing & design etc all complete in direction of engineer in charge.(PSR.) | BI01010001010000000000000515BI0100001153 | 40 | No. |
|---|
| 42 | 42 | Repairing of Old Wooden Gate at South Block. (L.S,) | BI01010001010000000000000515BI0100001154 | 1 | Job |
|---|
| 43 | 43 | Engagement of following workers for maintenance of Entire Khusrobagh for one year. Sweeper (15 Nos- Full Time) | BI01010001010000000000000515BI0100001155 | 5475 | Man days |
|---|
| 44 | 44 | Electrician (2 Nos- Full Time) | BI01010001010000000000000515BI0100001156 | 730 | Man days |
|---|
| 45 | 45 | Plumber.( 1 No- Full Time) | BI01010001010000000000000515BI0100001157 | 365 | Man days |
|---|