Indian Oil Corporation Limited-IOCL has published Annual Rate Contract For Cleaning , Painting Of Tank Critical Structures , Platforms In Tank Farm , Pump Sheds , Platforms In Pump Shed Area Other Structures At Phbpl Paradip. Submission Date for this Tender is 06-04-2020. Cleaning Work Tenders in PHBPL PARADIP Odisha. Bidders can get complete Tender details and download the document.
| Name of Work: Annual Rate Contract for cleaning, Painting of tank critical structures, platforms in tank farm, pump sheds, platforms in pump shed area other structures at PHBPL Paradip | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 10 | Surface preparation using hand tool cleaning using non sparking tools and solvent cleaning including removal of oil, grease and other contaminants removal of loose or defective paint, loose mill scale, loose rust, weld flux and slag from the metallic surfaces, by hand chipping, scrapping, hand brushing, using chipping hammers, hand scrappers/chisels, coire brushes, sand paper, steel wools etc. and final cleaning with high pressure (@ 3000 psi and more), low TDS soft water jet and drying with compressed air , with clean brushes/rags, providing all labours, tools & tackles, arrangement for working at heights to complete the work in all respect as per the specifications, and directions of EIC / Site E ngineer. The Prepared surface shall conform to ST. 2.Holes and pits during the course of surface preparation on the roof must be plugged by owner supplied metal putty to mould the pits in perfect match with the flat surface of top deck plates prior to application of primer strip coat .The fine nylon wire mesh shall be provided by contractor for plugging holes with metal putty. | 10 | ||
| 2 | 20 | Crude oil tank roof, shell associated structures, platforms, piping in tank farm, all pump sheds, platforms, piping in pump shed area, COT area any other structural member in PHBPL installation | 20 | 74000 | SQM |
| 3 | 30 | PAINTING-One coat of high build, self priming, rust encapsulating polyamidoamine cured epoxy mastic coating aluminium version (min 80 % solid by volume) to a dry film thickness of 100 microns by AIRLESS SPRAY or BRUSH application followed by one coat of MIO (80% solid by volume) with minimum 100 microns DFT by AIRLESS SPRAY or BRUSH application, followed by two coats of isocyanate acrylic aliphatic PU coat (min50% solid by vol.) with each coat minimum 50 microns DFT by AIRLESS SPRAY or BRUSH application .Stripe coat to be applied prior to spray painting on all welds (Primer & MIO), locations of exposed steel surface (Primer) without any extra cost. Overcoating interval to be interspersed with water washing after each coat wherever and whenever required. | 30 | ||
| 4 | 40 | Crude oil tank roof, shell associated structures, platforms, piping in tank farm, all pump sheds, platforms, piping in pump shed area, COT area any other structural member in PHBPL installation | 40 | 74000 | SQM |
| 5 | 50 | Erection of double steel scaffolding for providing suitable platform for working at heights in line with all safety guidelines indicated in tender and instructions of Engineer-in-Charge/Site-Engineer. All workers working at height should wear full body harness.. Supply of all tools, tackles, materials, consumables, labours, erection works, repairing of bitumen tank pad ,damaged during installation/removal of scaffolding, etc. shall be in the scope of contractor | 50 | 2000 | SQM |
| 6 | 60 | Providing JLG/Genie make articulating boom with 60ft or above working height including operation and maintenance (providing diesel for daily working, operator in 8hrs shift, food, accomodation). Maintaining the equipment in working condition all the time as per tender specifications. Rate is inclusive of any movement/transportation done inside plant premises. | 60 | 24 | MON |
| 7 | 70 | Inspection services: Deployment of NACE certified coating inspector of at least level 1 (NACE CIP Level-1) for Inspection and supervision of all activities related to painting. as per the instruction of EIC/Site Engineer.Note: The SOR shall be cost of One Inspector/ Week. The quanitity of deployment of Inspectors shall be as per the instruction of EIC. One week shall mean 6 working days from Monday to Saturday for 8 hours daily. if required NACE CIP Level II or III inspector shall be deputed for qualifying the painters | 70 | 104 | WK |
| 8 | 80 | Supply and fixing of stickers of various sizes and Letter writing of various sizes. For sticker, measurement shall be total length and height of the sticker. Measurement for letter writing width of the letter multiplied by the height of the letter multiplied by number of letters | 80 | 4000 | FT2 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
