| 1 | 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting for all leads and lifts excetra complete.\nItem / Page No : 2 / 197\nSpecification No : Bd.A.1\nSpec. Page No : 259\n | | 14.78 | Cubic Metre |
|---|
| 2 | 2 | Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork,laying/pumping, compacting and curing excetra complete, with fully automatic micro processor based Programmable Logic Control with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer. - With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 1 / 226\nSpecification No : Bd.E.1\nSpec. Page No : 287-288\nAdditional Specifications : With additional specifications for controlled concrete. | | 6.432 | Cubic Metre |
|---|
| 3 | 3 | Providing and laying in situ/Ready Mix cement concrete M-20 of trap metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 11 / 230\nSpecification No : Bd.F.3, B-7\nSpec. Page No : 298, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | | 5.4 | Cubic Metre |
|---|
| 4 | 4 | Providing and laying cast in situ / Ready Mix cement conrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed, including steel centering, formwork, cover blocks,aying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete.with fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For Ground Floor)\nItem / Page No : 31 / 232\nSpecification No : Bd.F.5, B-7\nSpec. Page No : 300, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | | 2.17 | Cubic Metre |
|---|
| 5 | 5 | Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap metal for reinforced cement concrete plinth beams as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, compacting, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With natural sand/V.S.I. quality Artificial Sand\nItem / Page No : 23A / 241\nSpecification No : Bd.F.12, B-7\nSpec. Page No : 304-305, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | | 2.28 | Cubic Metre |
|---|
| 6 | 6 | Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For Ground Floor)\nItem / Page No : 50 / 234\nSpecification No : Bd.F.6, B-7\nSpec. Page No : 300-301, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | | 1.11 | Cubic Metre |
|---|
| 7 | 7 | Filling in plinth and floors with approved excavated materials in 15 centimetre to 20 centimetre layers including watering and compacting, excetra complete.\nItem / Page No : 36 / 201\nSpecification No : Bd.A.10\nSpec. Page No : 262-263\n | | 10 | Cubic Metre |
|---|
| 8 | 8 | Filling in plinth and floors with contractors material / brought from outside and approved by Engineer In-Charge, in 15 centimetre to 20 centimetre layers including watering and compation excetra complete.\nItem / Page No : 37 / 201\nSpecification No : Bd.A.11\nSpec. Page No : 263-264\n | | 27.45 | Cubic Metre |
|---|
| 9 | 9 | Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks, compacting, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With natural sand/V.S.I. quality Artificial Sand (For Ground Floor)\nItem / Page No : 5 / 239\nSpecification No : BDF-9, B-7\nSpec. Page No : 303-304, 38-40\nAdditional Specifications : With additional specification for controlled concrete. | | 0.001 | Cubic Metre |
|---|
| 10 | 10 | Providing and fixing of colour coated zincalume (R) AZ 150 (Minimum 150 grams per square metre total on each sides) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 milimetre base metal thickness (BMT) (0.5 milimetre TCT), Hi-strength steel with minium 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium, 43.4% zinc, 1.6% silicon) with COLORBOND (R) steel quality super durable polyster paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nominal 950-1050 milimetre effective cover width and nominal 25-30 milimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 milimetre center to centre. The end rib shall be designed for anti capilary groove and return leg. The feed material should have coil manufacturer's product details marked at regular interval. Including fasteners with minium fatened with minium 25 um zinc-tin alloy coated, hex head, self-drilling screw, excetra complete. (Weight of profile 4.52 kilogram per square metre). - 601 milimetre to 900 milimetre girth (surface width) (For Ground Floor)\nItem / Page No : 36 / 304\nAdditional Specifications : The work shall be done as per instructions of Engineer in charge. | | 103.21 | Running Metre |
|---|
| 11 | 11 | Providing and fixing in position thermo mechnically treated FE-500 bar reinforcements of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. (For Ground Floor)\nItem / Page No : 33 / 245\nSpecification No : Bd.F.17\nSpec. Page No : 306\n | | 0.877 | Metric Ton |
|---|
| 12 | 12 | Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25 milimetre to 450 milimetre section as per Indian Standard : 4923 YST 310 grade produced from iron ore and blast furnace route, excetra as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and painting complete. (For Ground Floor)\nItem / Page No : 12 / 225\nAdditional Specifications : Work shall be carried out as per the instructions of Engineer In-Charge. | | 1.378 | Metric Ton |
|---|
| 13 | 13 | Providing and fixing 90 centimetre X 60 centimetre marble name plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete.\nItem / Page No : 11 / 374\nSpecification No : Bd.W.7\nSpec. Page No : 586-587\n | | 1 | Number |
|---|
| 14 | 14 | Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.\nItem / Page No : 3 / 0\nAdditional Specifications : 1. Government of Maharashtra, Revenue and Forest Department Gazette Number 67 Dated 15-5-2015 and Government of Maharashtra Public Works Department State Schedule of Rates 2017-18 General Note Number 4.3. 2. Above / below percentage quoted by the contractor will not be applicable for this item. | | 28.419 | Cubic Metre |
|---|
| 15 | 15 | Surcharge on Royalty charges at the rate of two percent of Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.\nItem / Page No : 14 / 0\nAdditional Specifications : 1. Letter from the Chief Engineer, Public Works Region, Nagpur; bearing number Ka.Raste-6/Darsuchi/7618/2019 dated 11/09/2019 and Corrigendum number 1 attached to the letter. 2. Above / below percentage quoted by the contractor will not be applicable for this item. | | 28.42 | Cubic Metre |
|---|
| 16 | 16 | Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.\nItem / Page No : 4 / 0\nAdditional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it. | | 1 | Number |
|---|
| 17 | 17 | Add 1 % for Insurance\nNon-Dsr Item\nAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | | 1 | Lumpsum |
|---|
| 18 | 18 | Add 12 % for GST\nNon-Dsr Item\nAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. | | 1 | Lumpsum |
|---|
