Sales : +91-777 804 8217
| Name of Work: Construction of Warehouse for storage of Electronic Voting Machines (EVMs) and VVPATs including water supply and sanitary Installation & Rain water harvesting system at Dari, Dharamshala in Distt. Kangra H.P. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseleing or any other mixed variety of soil, de-watering and/or removal of slush and incidentals, lift upto any heights, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimetre)layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-Charge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 853.56 | Per cubic metre | |
| 2 | 2 | Excavation in drains and channels etc; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseleing or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. As per approved drawing, design and as directed by the Engineer-in-Charge. | 54.72 | Per cubic metre | |
| 3 | 3 | Sand filling under floor including watering, ramming, consolidating and dressing complete within all leads, lifts of materials and other incidentals as per approved quality sand drawing, design and as directed by the Engineer-in-Charge. | 89.95 | Per cubic metre | |
| 4 | 4 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 354.68 | Per square metre | |
| 5 | 5 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per Architectural drawing and the like floor etc. within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 1807.5 | Per square metre | |
| 6 | 6 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders and lintels sides and soffits of beams, beam haunchings, cantilevers bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 1092.99 | Per square metre. | |
| 7 | 7 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts Square, rectangular or polygonal in plan within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 751.56 | Per square metre. | |
| 8 | 8 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 95.76 | Per square metre. | |
| 9 | 9 | Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls under any thickness within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 445.2 | Per running metre. | |
| 10 | 10 | Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 215.68 | Per square metre | |
| 11 | 11 | Providing and laying cement concrete 1:6:12 (One cement isto Six sand isto Twelve graded broken/crushed stone aggregate 40mm (Forty millimeters) nominal size and down gauge) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 75.2 | Per cubic metre | |
| 12 | 12 | Providing and laying cement concrete1:4:8 (One cement isto Four sand isto Eight graded broken/crushed stone aggregate 40mm (Forty milimetres ) nominal size and down gauge) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 38.59 | Per cubic metre | |
| 13 | 13 | Stone filling in plinth with approved quality under floor including watering, ramming, consolidating and dressing complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 79.45 | Per cubic metre | |
| 14 | 14 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including rakcking out joints with cement mortar 1:6 (One cement isto Six sand) and curing complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 23.74 | Per cubic metre | |
| 15 | 15 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic meter to give an smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like and mass concrete within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 219.88 | Per cubic metre | |
| 16 | 16 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers etc; within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 504.14 | Per cubic metre | |
| 17 | 17 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts for all floors heights within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 170.79 | Per cubic metre | |
| 18 | 18 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor level within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 22.76 | Per cubic metre | |
| 19 | 19 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in vertical walls upto any thickness but not less than 0.10m (Zero decimal ten metres) including attached, pilasters, buttresses, plinth and string courses and the like within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 48.54 | Per cubic metre | |
| 20 | 20 | Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete in reinforcement work for reinforced concrete Chhajjas for all thickness in all floor levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work and curing complete but excluding the cost of reinforcement for reinforced concrete work up to all floors level up to all height as per direction of Engineer-In-charge. within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 3.36 | Per cubic metre | |
| 21 | 21 | Providing and laying upto floor level reinforcement concrete work M-20 (M-twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) mechanically mixed and vibrated to give smooth and even surfaces including centring and shuttering etc. but excluding the cost of reinforcement as in mouldings as in cornices, windows sills etc not exceeding 15cm (Fifteen centimetres) in girth as per drawing and design complete upto floor all level within all leads, lifts of materials and other. incidentals and as per approved drawing, design and as directed by the Engineer-in-Charge. | 6.5 | Per cubic metre | |
| 22 | 22 | Providing Tor steel reinforcement for reinforced cement concrete work including bending, binding, straighting, cutting and placing in position complete including cost of binding wires complete and other incidentals due for its completion for all floors within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 160252 | Per kilo-gram | |
| 23 | 23 | Providing and laying Damp Proof Course 100mm (One Hundred milimetres) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 12.5mm (Twelve decimal five milimetres nominal size) and curing complete, as required at site within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 55.06 | Per Square metre | |
| 24 | 24 | Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) or equivalent using 1.70 Kgs. (one decimal seventy Kilogram’s) per square metre. On Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil; within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 55.06 | Per Square metre | |
| 25 | 25 | Second class half brick work using common burnt clay building bricks with hoop iron in super-structure upto all floor level with hoop iron in cement mortar 1:4(One cement isto four sand). within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 279.65 | Per square metre | |
| 26 | 26 | Second class brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 345.44 | Per cubic metre | |
| 27 | 27 | Providing and fixing anodised aluminium work for door, window, ventilators and partitions aluminium frame extrusion sections (No 14081) 127X44.45X3.00mm (one hundred twenty seven into forty four deciman four five into three millimetre) of Jindal / Hindalco aluminium extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 1975.3 | Per kilogram | |
| 28 | 28 | Providing and fixing coloured anodised aluminium for door, window, ventilators and partitions with extruded built up standard tubular and other sections as required of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips,or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle,aluminium, snap beading for glazinge/panelling C.P. brass/ stainless steel screws. All completeas per architectural drawings and the directions of Engineer-In-Charge. For shutters of doors window and ventilator including providing and fixing hinges / pivots and making provisions for fixing of fittings wherever required including cost of PVC / neoprene gaskets as required of Jindal / Hindalco including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 2811.86 | Per kilogram | |
| 29 | 29 | Providing and fixing ply wire mesh shutters in windows within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 126.43 | Per square metre | |
| 30 | 30 | Providing and fixing aluminium 8mm (eight millimetre) thick grill anodised powder coated pattern to existing window /ventilatior with 80mmx80mm (eighty millimetre into eighty millimetre) panels holes with 25x8mm (twenty five into eight millimetre) thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 38.05 | Per square metre | |
| 31 | 31 | Providing and fixing angle iron frames manufactured from M.S.Angle iron section 25X25X5mm (Twenty five into Twenty five into Five milimetres) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25mm (Twenty five into Twenty five milimetres) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two decimal Five milimetres) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in-Charge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. . | 142.66 | Per running metre. | |
| 32 | 32 | Providing and fixing fixed steel window steel glazed doors, windows and ventilators of standerd rolled steel sections, joints mitred and welded with 16x3.15 mm (sixteen into three point one five) lugs 10 cm (ten centimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm (fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand istyo six graded stone aggregate 20mm (twenty millimetre) nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh put of approved make complete including applying a priming coat of red lead paint within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 3.6 | Per square metre | |
| 33 | 33 | Providing and Fixing 12 mm (twelve millimetre) thick Phenol bonded prelaminated board both side water proof particle board door shutter infull panel Matt finish ISI Marked IS No 12823 Action Tesa / Kitlam / Greenlam / Merinolam / Vista as per ISI and approved shade including fittings within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. . | 63.38 | Per square metre | |
| 34 | 34 | Providing and fixing to existing door frames, 30mm (Thirty millimetres) thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 (Nineteen) gauge thickness and size of 19mm x19mm (Nineteen into nineteen millimetres) for styles and 15mmx15mm (Fifteen into fifteen millimetres) for top & bottom rails, code 9.120 of rajshri M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm (Five millimetres) thick heat moulded PVC \"C\" channel of size 30mm (Thirty millimetres) thickness, 70mm (Seventy millimetres) width out of which 50mm (Fifty millimetres) shall be flat and 20mm (Twenty millimetres) shall be tappred in 45 (Forty five ) degree angle on either side forming style and 5mm (Five millimetres) thick, 95mm (Ninety five millimetres) wide, PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered in 45 (Forty five) degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen) wide PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetres) thick, 20mm (Twenty millimetres) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm ( One hundred into fifty into one decimal ninety millimetres) size with necessary screws etc complete as directed by the Engineer-in-Charge.within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge | 18.45 | Per square metre | |
| 35 | 35 | Providing and fixig glazing with glass panes of 5.5mm (Five decimal five milimertres) thickness (weight not less than 13.75 kg/sqm (Thirteen decimal Seventy five kilograme per square metres) glazing in aluminium door, windows, ventilators\ shutter and partition etcetra; with PVC/Neoprens gasket etcetra; complete as per the architectural drawings and the direction of Engineer-in-Charge (Cost of aluminium snap beading shall be paid separately) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 5.12 | Per square metre | |
| 36 | 36 | Providing and fixig glazing with glass panes of 4mm (four milimertres) thickness (weight not less than 10.00 kg/sqm (ten decimal zero kilograme per square metres) glazing in aluminium door, windows, ventilators\ shutter and partition etcetra; with PVC/Neoprens gasket etcetra; complete as per the architectural drawings and the direction of Engineer-in-Charge (Cost of aluminium snap beading shall be paid separately) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 108.87 | Per square metre | |
| 37 | 37 | Supplying and fixing 4 mm (four millimetre) thick frosted glass panes of modi guard / Sanit gobain including fittings within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 19.44 | Per square metre | |
| 38 | 38 | Providing and fixing 25mm (Twenty five millimetres) thick water proof termite resistant commercial board Uniply / Green ply /Kit ply /Dura ply / Marino (ISI Marked ) board including 25mm (Twenty five millimetres) thick shelves and shutter back side of the cub board shall be 8 mm (eight millimetre) thick ply and all cut portions of shutter have 6mm /12 mm (six / twelve millimetre) thick hard wood edging .The shutter from out side shall to be finished with 1mm thick lamination of Century / Greenlam / Action Tesa / Merinolam approved shade in this office including fixing Top PTMT handles 125mm (one hundred twenty five millimetre) long shall be provided in wood colour with nickel plated piano hingesincluding fixing with nickel plated piano hinges with screws etcetera within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 29.32 | Per square metre | |
| 39 | 39 | Providing and fixing 25mm (twenty five millimetre) thick Commercial Board of Centuary ply (ISI marked) water proof shutters for SDB with 6 mm (six millimetre) thick hard wood edging all round and PGI sheet lining in side including fixing with nickel plated piano hinges with screws etc complete) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 20.16 | Per square metre | |
| 40 | 40 | Providing and fixing 19mm (nineteen millimetre) thick Commercial Board water proof board of Uniply/ Greenply /kitply/Centuary ply / Duraply /Marino ( ISI Marked ) Shelves and with hard wood edging to be finished with imm thick lamination of centuary/ Greenlam/ Action Tesa / Merinolam an d approved shade shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 4.44 | Per square metre | |
| 41 | 41 | Providing and fixing brass curtain rod with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25 mm (twenty five millimetre) dia and brackets of first class deodar wood (actuallenght) of rails of be measured within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 46.8 | Per running metre | |
| 42 | 42 | Providing and fixing magnetic catcher for cup board shutters with necessary screws etcetra; within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 52 | Number | |
| 43 | 43 | Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra complete (Indian make of approved quality) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 52 | Number | |
| 44 | 44 | Providing and fixing 300x16mm (Three hundred into Sixteen milimetres) size Pilot/sheel or equivalent anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 35 | Number | |
| 45 | 45 | Providing and fixing aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etc.Tower bolts (Barrel type) as approved drawing, design and as directed by the Engineer-in-Charge. | |||
| 46 | 45.1 | 200x10mm (Two hundred into Ten milimetres) size | 74 | Number | |
| 47 | 45.2 | 150x10mm (One hundred fifty into Ten milimetres) size | 476 | Number | |
| 48 | 46 | Providing and fixing aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade and of approved make with necessary screws etc. handles with the necessary screws etc. complete. within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | |||
| 49 | 46.1 | 125mm (One hundred twenty five milimetres) size | 94 | Number | |
| 50 | 46.2 | 100mm (One hundred milimetres) size | 200 | Number | |
| 51 | 47 | Providing and fixing oxidized 250mm (two hundred fifty milimetres) size M.S. hooks and eyes complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge | 139 | Number | |
| 52 | 48 | Providing and fixing Aluminum oxidized Hydraulical door closer Complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge | 5 | Number | |
| 53 | 49 | Providing and fixing 100mm (one hundred millimetres) bright finished brass door stoper with rubber cushion screws etc to suit shutter thickness complete within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 37 | Number | |
| 54 | 50 | Providing 25mm (Twenty five milimetres) thick Kota Stone flooring 55x55cm (Fifty five into Fifty five centimetres) (Mirror polished) with 7.5 cm (Seven decimal Five centimetres) wide with black mandana /Jaislmer yellow (uniform colour) marble band base of 20mm (twenty millimeter) thick cement mortar 1:4 (One cement: Four sand) laid over and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishign complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge | 427.53 | Per square metre | |
| 55 | 51 | Providing and laying 19mm (nineteen millimetre) thick polished Grey/ Black granite in flooring with semi round nosing 20mm (twenty millimetre) (average) thickness base of cement mortar 1:3 (one cement isto three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge | 7.28 | Per square metre | |
| 56 | 52 | Providing and laying Double charged vetrified tiles of Nitco / Kajaria / AGL /Johnson / Simpolo Orient -Bell / Somany 600x 600mm x 10mm (six hundred millimetre into six hundred millimetre into ten millimetre) sin grey/coloured or of approved shade and design in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge | 314.35 | Per square metre | |
| 57 | 53 | Providing and fixing 10mm (ten milimetre) thick Single charged / Single soluble salt vetrified tiles of Nitco / Simpolo / Orient -Bell / Rak/ Kajaria / (Eternity) /AGL/Johnson / Somany as per approved shade and design 600x600mmx10mm (six hundred millimetre into six hundred millimetre into ten millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge | 961.08 | Per square metre | |
| 58 | 54 | 50mm (fifty milimetres) thick cement concrete flooring 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and down gauge) laid in one layer finished with a floating coat of neat cement within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 46.54 | Per square metre | |
| 59 | 55 | Providing and laying 300 x 300 x 25 mm (three hundred millimetre into three hundred millimetre into twenty five millimetre) Labrador Design ( Rainbow Series) of NTC red sand stone slab flooring 25mm (twenty five millimetre) average thick in ramp for person with disability on 20mm (twenty millimetre) average thick base of cement mortar 1:4 (one cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab i/c rubbing and granite polish finish as per architect standred design and specification complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 10.8 | Per square metre | |
| 60 | 56 | Providing and laying antiskid ceremic tiles of premium quality of Nitco / AGL/ Kajaria / Somany /Johnson/ Bell tiles as per approved shade 5.5mm (five decimal five millimetre) thick in flooring 300 x300mm (three hundred millimere into three hundred millimetre) Size laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) finished with flush pointing in white cement within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 82.77 | Per square metre | |
| 61 | 57 | Providing and laying heavy duty precast cement concrete of NTC inter locking paver blocks vibro compacted upto M-50 (M-Fifty) grade including border or kurb block Grey or coloured over sub-base of concrete withn 25mm (Twenty five milimetres) thick average thickness of cement mortar 1:4 (One cement : Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (sub-base concrete floor to be paid for separately) within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge | |||
| 62 | 57.1 | 60mm (sixty milimetres) thick inter locking paver blocks | 185 | Per square metre | |
| 63 | 57.2 | 40mm (Forty milimetres) thick inter locking paver blocks | 185 | Per square metre | |
| 64 | 58 | Providing 25mm (twenty five milimetres) thick kota stone skirting (mirror polished) in dado and pillars laid on a bed of 12mm (Twelve milimetres) (Average) thickness cement mortar 1:3 (One cement : Three sand) and jointed with Grey cement slurry mixed with pgiment to match the shade of the slabs including rubbing and polishing complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge | 33.97 | Per Square metre | |
| 65 | 59 | Providing and laying Double charged vetrified tiles of Nitco / Kajaria / AGL /Johnson / Simpolo Orient -Bell / Somany 600x 600mm x 10mm (six hundred millimetre into six hundred millimetre into ten millimetre) sin grey/coloured or of approved shade and design in skirting and dado on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge | 20.08 | Per square metre | |
| 66 | 60 | Providing and laying Single charged / Single soluble salt vetrified tiles of Nitco / Simpolo / Orient -Bell / Rak/ Kajaria / (Eternity) /AGL/Johnson / Somany as per approved shade and design 600x600mmx10mm (six hundred millimetre into six hundred millimetre into ten millimetre) in skirting and dados on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge | 30.66 | Per square metre | |
| 67 | 61 | Providing and laying 300X450 mm (three hundred into four hundred fifty millimetre) Ceremic Glazed tile of Kajaria/ Swastik / Somany / Bell / AGL/Johnson with one border matching contrast at top in skirting risers of steps and dados on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge | 259.41 | Per square metre | |
| 68 | 62 | Providing 25mm (twenty five milimetres) thick kota stone single slab with round nosing over heads of steps and landings on a bed of 12mm (Twelve milimetres) (Average) thickness cement mortar 1:3 (One cement isto Three sand) and jointed with Grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge | 55.62 | Per Square metre | |
| 69 | 63 | Providing and Laying 25mm (twenty five milimetres) thick kota stone single piece (mirror polished) in risers of steps and pillars laid on a bed of 12mm (Twelve milimetres) (Average) thickness cement mortar 1:3 (One cement : Three sand) and jointed with Grey cement slurry mixed with pgiment to match the shade of the slabs including rubbing and polishing complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge | 22.47 | Per Square mere | |
| 70 | 64 | Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet ISI marked - Z 120 of tata / sail / reliance / jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification and as directed by the Engineer-in-Charge | 895.68 | Per square metre | |
| 71 | 65 | Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60cm (Zero decimal Sixty centimetres) thick prepainted steel sheet ISI marked - Z 120 of approved make in ridges (Factory made) shall be having proper Gola/Shape of steel sheet Tata/ Sakti or equivalent with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge | 91.1 | Per running metre | |
| 72 | 66 | Providing and fixing valleys 90 cm (ninety centimetres) over all over all with 0.60mm (Zero decimal Six zero milimetres) thick prepainted sheet ISI marked - Z 120 roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (five) micron primer coating, back coat of polyster of 5 (Five) microns including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge | 81.4 | Per running metre | |
| 73 | 67 | Providing and fixing 30cm (thirty centimeters) wide 25cm (twenty five centimeters) as per design and drawing 0.60mm (Zero decimal Six zero milimetres) thick plain G.I. sheet TATA / Shakti gutter with iron brackets 40x3mm (Forty into Three milimetres) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe and providing complete accesories within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge | 121.6 | Per running metre | |
| 74 | 68 | Providing and fixing plain M.S. B.P. iron sheet 1.66mm (One decimal sixty six millimeter) thick fixed in eaves board / facia / soffits /ceiling including jointing with gas/ electric welding in position complete (frame work is to be measured and laid for separately within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge | 84.21 | Per square metre | |
| 75 | 69 | Providing and fixing flashing 38cm (thirty eight centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories within all leads, lifts of materials and other. Incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. . | 63.8 | Per running metre | |
| 76 | 70 | Providing and fixing on wall face 150mm (One hundred fifty milimetres) diametres P.V.C. rain water pipes of water pressure 4/6kg (four / six kilogramme) per square centimetre as per ISI finolex / Ralpipe / vectos or its equivalent pipe confirming to IS code 13592 for rain water pipe fixed with approved adhesive including filling the joints complete within all leads, lifts of materials and other incidentals, and as directed by the Engineer-in-Charge. | 210 | Per running metre | |
| 77 | 71 | Providing and fixing on wall face P.V.C. acessories for rain water pipes of washing pressure 4/6kg (four / six kilogramme) as per ISI finolex / Ralpipe / vectos or its equivalent for rain water pipe fixed with approved adhesive including filling the joints complete within all leads, lifts of materials and other incidentals. and as directed by the Engineer-in-Charge | |||
| 78 | 71.1 | 150mm (One hundred fifty milimtres) diametrees PVC Plain bend | 30 | Number | |
| 79 | 71.2 | 150mm (One hundred fifty milimtres) diametrees PVC shoe | 15 | Number | |
| 80 | 72 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawls plugs etc complete within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | |||
| 81 | 72.1 | 150mm (One hundred fifty milimetres) diametres | 550 | Number | |
| 82 | 72.2 | 110mm (One hundred ten milimetres) diametres | 254 | Number | |
| 83 | 72.3 | 75mm (seventy five milimetres) diametres | 74 | Number | |
| 84 | 73 | Steel work welded in built up sections joists channels, angles, tees with connection plates or angles, cleat as in trusses, trussed purlins main and cross beams, hips jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge | 192.177 | Per quintal | |
| 85 | 74 | Providing and laying Dr. Fixit torch shield (IP-3160-3mm) shall be used for water proofing treatment on terrace/depressed portion membrances are made from high grade bitumen and selected polymers, APP/SBS modified bitumen thin coated to non-woven polyster reinforcement to give high care and puncher resistance. The application shall be done as per Architectural drawing, specification within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge | 90 | Per Square mere | |
| 86 | 75 | Providing and fixing 50 mm (fifty millimetre) dia SST (Stainless steel) pipe handrail fixed with 35 mm (thirty five millimetre) dia stainless steel baluster as per detail in combination of 35mm (thirty five millimetre) dia and 15/20mm (fifteen / twenty millimetre) SST pipe baluster knock down railing of KICH hand rail fixed on 10X50mm (ten into fifty millimetre) S.S.flat baluster placed at 1200 mm (one thousand two hundred millimetre) centre to centre along with 3 (three) nos (three Number) at the rate 16 MM (sixteen milimetre) mid rail connected at the side of the baluster with fixtures .The baluster would be fixed on the floor with casted base plate minimum 6mm thick base plate shall be concealed with suitable S.S. 316 (three hundred sixteen) grade cover cap .railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etectra of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) within all leads, lifts of materials and other. Incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. . | 35.4 | Per running metre | |
| 87 | 76 | Providing and fixing of hollow pipe of 50mm (fifty millimetre) dia. S ST (stainless steel) pipe hand rail slip resistant with round ended joint at two level at 75cm (seventy five centimetre) and 90cm (ninety centimetre) height welded with 25mm (twenty five millimetre) diametre baluster embedded in cement concrete 60cm (sixty centimetre) centre to centre and jointing with electrical gas welding at top alongwith hand rail as per actual drawings and specifications within all leads, lifts of materials and other. Incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. . | 12.4 | Per running metre | |
| 88 | 77 | Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter enamel paint other than white within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 502.25 | Per square metre | |
| 89 | 78 | Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting with ready mixed paint brushing wood primer pink within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 543.88 | Per square metre | |
| 90 | 79 | Painting two or more coats (excluding priming coat) on new wood and wood based surface with enamel paint other than white to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering and stoping within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 543.88 | Per square metre | |
| 91 | 80 | 6mm (Six milimetres) thick cement plaster in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 2405.98 | Per square metre | |
| 92 | 81 | Providing and fixing aluminium composite panel ceiling 600 x600 x15 mm (six hundred into six hundred into fifteen millimetre) including prepainted G.I. Channel at the rate 600mm (six hundred millimetre) Centre to centre as per detail design, drawings and specification within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 90 | Per square metre | |
| 93 | 82 | 15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 1497.31 | Per square metre | |
| 94 | 83 | 15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 1497.31 | Per square metre | |
| 95 | 84 | 15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement isto five sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 1283.58 | Per square metre | |
| 96 | 85 | Providing and fixing Unistone not less than 12mm (twelve millimeter) thick cladding on walls/ Reinforced Cement Concrete surface outside as on faces of Arch masonry walls etc.on 12mm (Twleve millimetres) thick cement plaster 1:3 (One cement isto three sand) and jointed with cement slurry including scaffolding etc. complete.as per Architectural drawing ,design and specification within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 158.08 | Per square metre | |
| 97 | 86 | Applying Birla / J.K white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 5400.6 | Per square metre | |
| 98 | 87 | Finishing wall with Apex weather proof exterior grade emulsion of Asians Paints / Exterior Emulsion of Nerolac Suraksha paint as per approved shade approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 1283.58 | Per square metre | |
| 99 | 88 | Applying two coatc of Acrylic Washable emulsion Asian / Dulux /Nerolac paints or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand papered smooth complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 1030.35 | Per square metre | |
| 100 | 89 | Wall painting (two coats) with Premium emulsion paint of Asian / Dulux /Nerolac paints approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 1543.84 | Per square metre | |
| 101 | 90 | Distempering (two coats) with acrylic oil bound washable distemper with Nerolac/ Asian paints of approved brand and manufacture and of required shade on ceiling/sloping roof surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.Priming coat with distemper primer within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 2405.98 | Per square metre | |
| 102 | 91 | Distempering (two coats) with acrylic oil bound washable distemper with Nerolac/ Asian paints of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.Priming coat with distemper primer within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 163.31 | Per square metre | |
| 103 | 92 | Providing Plinth protection with 60 mm (sixty millimetre) thick interlocking paver blocks with 23 cm (twenty three centimetre) dia. Half round pipe for drainage purpose fixed over cement concrete 1:5:10 (one cement isto five sand isto ten graded / crushed stone aggregate) 40mm (forty millimetre) nominal size for bedding of pipe within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 121.6 | Per square metre | |
| 104 | 93 | Providing and Fixing Charomium plated 40mm (forty millimetres) dia steel pipe for grab bars at 78cm (seventy eight centimetres) height metres M.S. plate as per details at the position of the seat and Wash Basin complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. | 6 | Number | |
| 105 | 94 | Providing and fixing polythelene aluminum polythelene (PE- AL-PE) composite pressure pipe U.V. stabilized with carbon block confirming to I.S. 1545-2004 of Kitec or its equivalent for water supply including clamps at appropriate spacing, cutting fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work), including filling the joints with approved adhesive complete including entire carriage of materials within all leads lifts and other incidentals. | |||
| 106 | 94.1 | 1216 (16mm) sixteen millimeter diameter pipe O.D. pipe | 200 | Per running metre | |
| 107 | 94.2 | 1620 (20mm) twenty millimeter diameter pipe O.D. pipe | 220 | Per running metre | |
| 108 | 95 | Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty milimetres to Forty milimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including entire carriage of materials within all leads lifts and other incidentals. | 1 | Number | |
| 109 | 96 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes light grade ISI marked including fixing with approved adhesive etc. complete including entire carriage of materials within all leads lifts and other incidentals. | |||
| 110 | 96.1 | 150mm (One hundred fifty milimetres) diametres | 487 | Per running metre | |
| 111 | 96.2 | 110mm (One hundred ten milimetres) diametres | 225 | Per running metre | |
| 112 | 96.3 | 75mm (seventy five milimetres) diametres | 56 | Per running metre | |
| 113 | 97 | Providing and fixing P.V.C. I.S.I. marked heal rest including filling the joints with including fixing with approved adhesive within all leads, lifts of materials and other incidentals | |||
| 114 | 97.1 | 150mm nominal (One hundred fifty milimetres) diameter. (confirming to BIS-14735-99) | 20 | Number | |
| 115 | 97.2 | 110mm (One hundred ten milimetres) diameters (confirming to BIS-14735-99) | 20 | Number | |
| 116 | 98 | Providing and fixing P.V.C. Collar ISI marked including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals | |||
| 117 | 98.1 | 150mm (One hundred fifty milimetres) diameter. (confirming to BIS-14735-99) | 93 | Number | |
| 118 | 98.2 | 110mm (One hundred ten milimetres) diametres (confirming to BIS-14735-99) | 58 | Number | |
| 119 | 98.3 | 75mm (seventy five milimetres) diametres (confirming to BIS-14735-99) | 17 | Number | |
| 120 | 99 | Providing and fixing P.V.C. I.S.I. marked cowl 75mm (seventy five milimetres) diametres (confirming to BIS-14735-99) ISI marked including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals | 4 | Number | |
| 121 | 100 | Providing and fixing 110 x 90mm (One hundred ten into Ninety milimetres) P.V.C. I.S.I. marked floor trap ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete, within all leads, lifts of materials and other incidentals | 52 | Number | |
| 122 | 101 | Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) Orissa Pattern No 20090 size 53 X 41 cm (fifty three into forty one centimetre) of Hindware /Cera /Jaquar of star white / snow white shade (Earth work, bed concrete,foot rest and trap to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 3 | Number | |
| 123 | 102 | Providing and fixing W.C. Of Star S no 20087 (S- 10) of size 57 X 35 X 39 Cm (fifty seven into thirty five into thirty nine centimetre) of Hindware /Cera/ Jaquar of star white / snow white shade vitreous china wash down closet (European type W.C. pan) with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) (seat and cover to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 7 | Number | |
| 124 | 103 | Providing and fixing W.C. Of Matrix of Hindware /Cera/ Jaquar of star white / snow white shade vitreous china wash down closet (European type W.C. pan) with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) (seat and cover to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 2 | Number | |
| 125 | 104 | Providing and fixing PVC coloured/white with (dual flushing system) 10.00 Ltrs (Ten litres) capacity low level flushing cistern (Sleek Plus) Hindware/cera/Jaquar of star white / snow white shade with fittings such as lead valve less siphon, 15mm (Fifteen milimetres) nominal size PVC ball valve with polythene float, with flush buffor, unions and couplings for connection with inlet, outlet and over flow pipe, 40mm (Forty milimetres) diametres C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 12 | Number | |
| 126 | 105 | Providing and fixing sand cast iron 100mm (one hundred millimetre) size P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (one cement isto one sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 3 | Number | |
| 127 | 106 | Providing and fixing G.I. inlet connection pipe for each flush pipe with W.C. pan within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 12 | Number | |
| 128 | 107 | Providing and fixing plastic seat solid type and cover of Hindware/cera/Jaquar of star white / snow white shade for wash down water closet with C.P. brass hinges and rubber buffers (white plastic seat and cover) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 9 | Number | |
| 129 | 108 | Providing and fixing flat back No of 60002 of size 390 x 375x590mm (three hundred ninety into three hundred seventy five into five hundred ninety milimetres) size Hindware / Jaquare of star white / snow white shade vitreous China urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separatelywithin all leads, lifts of materials and other incidentals | 8 | Number | |
| 130 | 109 | Providing and fixing 600x300mm (Six hundred into Three hundred milimetres) vitreous china division plate for urinals of Hindware /cera/Jaquar of star white / snow white shade within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 8 | Number | |
| 131 | 110 | Providing and fixing vitreous china wash basin Garnet No.10080 of Cera / Hindware 58x43cm (fifty eight into forty three centimetre) (under counter basin) Hindware / cera / Jaquar of star white / snow white shade with single hole for pillar tap with pedestal including C.I. or M.S. brackets, painted white including cutting holes and making good the same but excluding fittings within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 10 | Number | |
| 132 | 111 | Providing and fixing vitreous china wash basin Matrix of Cera / Hindware 55x40cm (fifty five into forty centimetre) with single hole for pillar tap with pedestal including C.I. or M.S. brackets, painted white including cutting holes and making good the same but excluding fittings within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 2 | Number | |
| 133 | 112 | Providing and fixing stainless steel kitchen sink size 610 x460 mm (six hundred ten into four hundred sixty millimetre) with bowl depth 200 mm (two hundred millimetre) of Hindware /cera approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. | 1 | Number | |
| 134 | 113 | Providing and fixing 32mm (Thirty two millimetres) nominal size diametres rubber plug for wash basin (marked no 8931-7893) within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 14 | Number | |
| 135 | 114 | Providing and fixing 32mm (Thirty two millimetres) diametres M.I. union for wash basin or sink.complete within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 14 | Number | |
| 136 | 115 | Providing and fixing 32mm (Thirty two millimetres) diametres C.P Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal waste for wash basin or sink complete within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 14 | Number | |
| 137 | 116 | Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal for gully floor or Nahni trap within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 50 | Number | |
| 138 | 117 | Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty milimetres) beveled edge mirror of Hindware /cera/Jaquar or superior glass mounted on 6mm (Six milimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers within all leads, lifts of materials and other incidentals | 12 | Number | |
| 139 | 118 | Providing and fixing 600x20mm (Six hundred into Twenty milimetres) C.P. brass Towel rail of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal.brackets fixed to wooden plugs within all leads, lifts of materials and other incidentals | 13 | Number | |
| 140 | 119 | Providing and fixing 600x120mm (six hundred into one hundred twenty millimetre) glass shelf of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of jal with C.P. brass. (Heavy duty makes ISI marked) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws within all leads, lifts of materials and other incidentals | 13 | Number | |
| 141 | 120 | Providing and fixing C.P. brass toilet paper holder of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of jal as per direction of Engineer-in-Charge, within all leads, lifts of materials and other incidentals. | 9 | Number | |
| 142 | 121 | Providing and fixing C.P. jet spray of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal of approved quality and colour with one metre tube within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. | 12 | Number | |
| 143 | 122 | Providing and fixing 15mm (Fifteen millimetres) diametre nominal bore chromium plated ISI marked fancy bib tap of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. | 25 | Number | |
| 144 | 123 | Providing and fixing 15mm (Fifteen millimetres) diametre C.P. stop cocks of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. | 40 | Number | |
| 145 | 124 | Providing and fixing 15mm (Fifteen milimetres) diametres C.P. brass pillar tap with capstan Head of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals | 35 | Number | |
| 146 | 125 | Providing and fixing 15mm (Fifteen milimetres) diametres C.P.brass angle valve without nuts of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal as per approved drawing and design directed by the Engineer-in-Charge within all leads, lifts of materials and other incidentals | 25 | Number | |
| 147 | 126 | Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass full way valve with wheel, of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. | 20 | Number | |
| 148 | 127 | Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass valve (Horizontal plunger) type High pressure with polythene plastic floats of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. | 20 | Number | |
| 149 | 128 | Providing and fixing 15mm (Fifteen milimetres) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetres) length within all leads, lifts of materials and other incidentals | 35 | Number | |
| 150 | 129 | Providing and fixing PVC waste pipe for wash basin, sink including check nut within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. | 35 | Number | |
| 151 | 130 | Providing and placing water tank make P.V.C. SINTEX or equivalent having capacity of 1000 (One thousand) liters each tank with necessary fittings including over flow pipe scour pipe etcetera and pads required for in let and out let ball valve with cover and locking arrangements complete in all respect within all leads, lifts of materials and other incidentals | 4 | Number | |
| 152 | 131 | Providing and laying 150mm (one hundred fifty millimetre) cement concrete 1:5:10 (one Cement isto five Sand isto ten graded stone aggregate 40mm (forty millimetre) nominal size bedding for PVC pipes of the following internal diameters, necessary form work and curing complete within all leads, lifts of materials and other incidentals, as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. | 180 | Per running metre | |
| 153 | 132 | Construction manhole with R.C.C. top slab in 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals. | 12 | Number | |
| 154 | 133 | Construction manhole with R.C.C. top slab in 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed/broken stone aggregate 40mm (Forty milimetres nominal size) inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement: Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 1.00 mtrs(One metre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals. | 9 | Number | |
| 155 | 134 | Constructing brick masonry chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5(One cement: Five sand) C.I. cover with frame(light duty) 455x610mm(Four hundred fifty five into Six hundred ten milimetres)internal dimensions total weight cover and frame to be not less than 38Kgs (Thirty eight Kilograms) weight of cover 23 Kgs (twenty three kilograms)and weight of frame 15 Kgs (Fifteen kilograms) RCC top slab with 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres nominal size) foundation concrete 1:5:10 (One cement: Fiver sand: Ten graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm ( Fifteen milimetres) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 455x610mmx450mm (Four hundred fifty five into Six hundred ten into Four hundred fifty milimetres) deep within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. | 39 | Number | |
| 156 | 135 | Providing and fixing polythelene aluminum polythelene (PE- AL-PE) composit end seal compression fitting as per IS-1545-2004 for cold water supply e.g. tees, elbows, reduser,connceters,couplers and claps jointing testing and fitting complete including entire carriage of materials within all leads lifts and other incidentals. | |||
| 157 | 135.1 | Providing & fixing Kitec/ Kisan Equal Tee (1620) | 100 | Number | |
| 158 | 135.2 | Providing & fixing Kitec/Kisan Female Elbow 1620 X15 mm) | 100 | Number | |
| 159 | 135.3 | Providing & fixing Kitec/Kisan Female branchTee.(1620X1620X20mm) | 90 | Number | |
| 160 | 135.4 | Providing & fixing Kitec /Kisan Female Elbow (1620 X15 mm) | 90 | Number | |
| 161 | 135.5 | Providing & fixing Kitec / KisanMale Thread Connector (1620X15mm) | 90 | Number | |
| 162 | 136 | Providing and fixing 455 x610mm (four hundred fifty five into six hundred ten millimetre) light duty rectangular C.I. manhole cover with frme cpver weight 38kg (thirty eight kilograms) single seat within all leads, lifts of materials and other incidentals, as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. | 1 | Number | |
| 163 | 137 | Provision for water pump 1.00 HP (one horse power) within all leads, lifts of materials and other incidentals, as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. | 1 | Number | |
| 164 | 138 | Providing and Fixing 15mm (fifteen millimetre) nominal bore mild steel tube within all leads, lifts of materials and other incidentals, as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. | 100 | Per running mere |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
