}

Construction Of New Control Room For Conversion Of 30V Dc To 110V Dc Control Supply At 110/22Kv Ss Thalaivasal . , Thalaivasal-Tamil Nadu

Tamil Nadu Generation And Distribution Corporation Limited-TANGEDCO has published Construction Of New Control Room For Conversion Of 30V Dc To 110V Dc Control Supply At 110/22Kv Ss Thalaivasal . . Submission Date for this Tender is 18-03-2020. Building Work Tenders in Thalaivasal Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

23755727
Construction Of New Control Room For Conversion Of 30V Dc To 110V Dc Control Supply At 110/22Kv Ss Thalaivasal .
Open Tender
Indian
Tamil Nadu
Thalaivasal
18-03-2020

Tender Details

Construction Of New Control Room For Conversion Of 30V Dc To 110V Dc Control Supply At 110/22Kv Ss Thalaivasal .

Key Value

Document Fees
Refer document
EMD
INR 45700.0 /-
Tender Value
INR 45.70 Lakhs /-

BOQ Items

Name of Work: Construction of new control room for conversion of 30V DC to 110V DC control supply at 110/22KV SS Thalaivasal.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Clearing Juliflora jungle with uprooting as directed by the Engineer at site including lead, lift,etc.complete. item 1 107 sqm
2 2 Earthwork excavation and depositing on bank with initial lead of 10m and initial lift of 2.0m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting , as per standard specification etc, complete (Hard gravelly soil) item 2 85.39 cum
3 3 Earthwork excavation and depositing on bank with initial lead of 10m and initial lift of 2.0m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting , as per standard specification etc, complete (Soft disintegrated rock) item 3 34.16 cum
4 4 Earthwork excavation and depositing on bank with initial lead of 10m and initial lift of 2.0m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting , as per standard specification etc, complete (Medium and dense medium rock not requiring blasting) item 4 22.95 cum
5 5 Earthwork excavation and depositing on bank with initial lead of 10m and initial lift of 2.0m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting , as per standard specification etc, complete (Removing Hard rock by wedging & chiseling) item 5 25.62 cum
6 6 Supplying and filling the M.sand for filling in the foundation and basement including cost of sand, filling charges as per standard specification (watering & consolidation) with all leads, lifts as per standard specification etc., complete. item 6 27 cum
7 7 Plain cement concrete in CC 1:4:8, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete. item 7 28.4 cum
8 8 Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 40mm jelly for wearing coat including shuttering ,laying, compacting, finishing and curing, etc., complete as per standard specifications and as directed by the departmental officers. item 8 31 cum
9 9 Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Column up to ground level and above GL including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.) item 9 21 cum
10 10 Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Grade beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.) item 10 12 cum
11 11 Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Retaining Wall including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.) item 11 26 cum
12 12 Refilling using the site excavated earth in foundation and basement or wherever necessary in 150mm thick layers, well rammed including filling charges as per standard specification (watering & consolidation) with all leads, lifts as per standard specification etc., complete. item 12 70 cum
13 13 Filling the around low laying area alround in section office building outside and raising basement using the gravel in 150mm thick layers, well rammed including filling charges as per standard specification (watering & consolidation) with all leads, lifts as per standard specification etc., complete. item 13 36 cum
14 14 Providing Anti-termite treatment to soil adjacent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers. item 14 106.5 sqm
15 15 Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Plinth beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.) item 15 4.8 cum
16 16 Brick work in CM 1:5 using class II bricks for super structure and septic tank, including cost of all materials, labour charges, curing scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer. item 16 43 cum
17 17 Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lintel beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.) item 17 4.2 cum
18 18 Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Sunshades of 600 mm with 75 mm thick at wall and 50 mm thick at free end including cost of cement, all materials, labour, curing, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.) item 18 1.6 cum
19 19 Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.) item 19 8.5 cum
20 20 Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof slab including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.) item 20 16 cum
21 21 Casting and fixing R.C.C. Precast slab of 50mm thickness using 20mm size machine crushed hard granite stone jelly in cement concrete 1:1.5:3 including cost ofshuttering moulding, curing, finishing fixing in position etc.,complete complying with standard specifications and as directed by the departmental officers (Slab size 1.00m x 0.30m x .05m) item 21 3.3 cum
22 22 Providing Steel reinforcement MS/RTS rods for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete. item 22 8740 Kgs
23 23 Wall Plastering 1:5, 12 mm thick on both sides of country brick wall after electrical piping work including the cost of all material, scaffolding charges, cement, labour charges, all leads, lifts, as per standard specification. item 23 700 sqm
24 24 Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. item 24 139 sqm
25 25 White washing two coats for Ceiling with approved quality of White cement including cost of all materials, labour, leads & lifts and as directed by Engineer at site. item 25 295 sqm
26 26 Painting the Outer and inner wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface etc., complete complying with standard specification. item 26 450 sqm
27 27 Supplying and fixing window Grill using MS Square Rod of required size including cost of all materials labour charges for fabrication and fixing lead and lift etc complete. item 27 980 Kgs
28 28 Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) item 28 23 sqm
29 29 Supplying and fixing UPVC (Un -Plastrcized polyvinyl chioride)window s of casement type (open) from the profile the size of outer frame 60mm x58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm .the EPDM rubber (block colour)covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should have key lockable action, security protective hinges strong locking systems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the executive engineer before use on work item 29 23 sqm
30 30 Supplying and fixing of FRP Door frame made out of country wood of size 100mmx75mm and Flush shutter of 30mm thick double leaf with design including cost of necessary fittings,Labour Charges for put up for doors in position etc. complete. item 30 5.8 sqm
31 31 Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) item 31 97 sqm
32 32 Weathering course with PCC 1:1.5:3 using 6 mm HBG stone over R.C.C. roof slab, for required depth of 50 mm for giving required slope and thickness to roof as required and laying one course of cooling tiles of 30 cm x 30cm x 7 mm size using CM 1:3,and pointed with the white cement including cost of cement, all materials, labour, curing, all leads and lifts, etc., complete as per standard specification. item 32 104 sqm
33 33 Providing PVC pipe of ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete (110mm dia PVC Pipe-6kg/cm2) item 33 25 rm
34 34 Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A F.T. switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (For electronic regulator). item 34 22 point
35 35 Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and the celling with PVC accessories in flush with wall with suitable flush type TW switch box to house the control switch and regulator, and covered with 3 mm Thick Hylern sheet with continuous earth wire connection of 14 SWG TC wire making good of the concealed portion with suitable colour for concealed fan point with (For rheostatic type fan regulator). item 35 5 point
36 36 Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. item 36 20 point
37 37 Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire , and making good of the concealed portion, with suitable colour for concealed power plug point. item 37 4 point
38 38 Supply and fixing 20W LED tube light Fitting Philips make or equivalent type on wall or ceiling. item 38 18 nos
39 39 Supply and fixing of water tight bulk head fitting suitable for LED 9 Watts lamp with guard heavy type (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for incandescent lamp. item 39 2 nos
40 40 Supply and fixing of 30w LED Street light fitting s with necessary pipe and clamps for fitting lead & lift etc complete. item 40 4 nos
41 41 Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300w regulator with 600mm down rod on the existing clamp. item 41 5 nos
42 42 Providing GI Angle for cable duct &Labour charges for fixing the MS Angles inside the cable duct including cost of all material lead, lift etc, complete. item 42 486 Kgs
43 43 GST item 44
44 43.01 SGST For bidders within Tamilnadu item 45 1 percentage
45 43.02 CGST For Bidders within Tamilnadu item 46 1 percentage
46 43.03 IGST For Bidders outside of Tamilnadu item 47 1 percentage
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail