| 1 | 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer in charge. In cement mortar | item1 | 4.51 | Cum |
|---|
| 2 | 2 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1Cement : 6 coarse sand) | item2 | 4.5 | Cum |
|---|
| 3 | 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | item 3 | 35 | Sqm |
|---|
| 4 | 4 | 12mm cement plaster of mix: 1:4 (1Cement :4 fine sand) | item 4 | 56.18 | Sqm |
|---|
| 5 | 5 | Providing and laying vitrified floor tiles in different size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4 coarse sand) jointing with grey cement slurry @3.3 Kg/Sqm including grouting the joints with white cement and matching pigments etc., complete Size of tile 600x600mm | item 5 | 241.14 | Sqm |
|---|
| 6 | 6 | Providing and fixing tiled false ceiling of specified materials of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \"T\" of size 24x25mm made of 0.30mm thick (minimum) sheet, 12000mm long spaced between main \"T\" at 600mm center to center to form aa grid of 1200x600 mm and secondary cross \"T\" of length 600mm and size 24x25mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of approved texture in the grid including required cutting/making, opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to cenfter along main T, buttom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer in charge. 12.5mm thick fully perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4mm c/c with center borders of 48mm and the side borders of 30mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50mm resin bonded glass wool backing | item 6 | 211.68 | Sqm |
|---|
| 7 | 7 | Providing and fixing wash basin with C.I. Brackets, 15mm C.P. Brass pillar taps, 32mm C.P. Brass waste of standard pattern, including painting of fittingss and brackets, cutting and making good walls wherever require. White Vitreous China Wash basin size 630x450mm with a single 15mm C.P. brass pillar tap | item 7 | 3 | Each |
|---|
| 8 | 8 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : circular shape 450mm dia | item 8 | 2 | Each |
|---|
| 9 | 9 | Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipe, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20mm nominal outer dia pipes | item 9 | 8 | Mtr |
|---|
| 10 | 10 | 25 mm nominal outer dia Pipes | item 10 | 14 | Mtr |
|---|
| 11 | 11 | Providing and fixing C.P. Brass bib cock of approved quality conforming to IS:8931:15mm nominal bore | item 11 | 5 | Each |
|---|
| 12 | 12 | Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, 15mm nominal bore | item 12 | 3 | Each |
|---|
| 13 | 13 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 15mm nominal bore, weighing not less than 32 gms | item13 | 1 | Each |
|---|
| 14 | 14 | Providing and fixing kitchen sink with C.I brackets, C.P. Brass chain with rubber plug, 40mm C.P. Brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250mm | item 14 | 1 | Each |
|---|
| 15 | 15 | Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1Cement :4Coarse Sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 Sqm | item 15 | 12.95 | Sqm |
|---|
| 16 | 16 | Toughened glass 6mm thickness | item 16 | 105 | Sqft |
|---|
| 17 | 17 | Toughened glass 12mm thickness | item 17 | 96 | Sqft |
|---|
| 18 | 18 | Toughened glass 12mm thickness | item 18 | 84 | Sqft |
|---|
| 19 | 19 | Toughened glass 10mm thickness | item 19 | 144 | Sqft |
|---|
| 20 | 20 | L connector S.S | item 20 | 16 | Nos |
|---|
