| 1 | 1 | Dismantling of plain or corrugated steel sheeting of any gauge & thickness from roof, gutter etc including Nainital or similar pattern roof covering and removing materials from site of work complete all as specified and as directed.\n | BI01010001010000000000000515BI0100001113 | 290 | Sqm |
|---|
| 2 | 2 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets and removing materials from site of work complete all as specified and as directed. | BI01010001010000000000000515BI0100001114 | 450 | Sqm |
|---|
| 3 | 3 | Dismantling of old decayed timber scantling 40 Sq cm and over in section in any position unframed work including removing of dismantled material from work site complete all as specified and as directed. | BI01010001010000000000000515BI0100001115 | 5 | Cum |
|---|
| 4 | 4 | Taking down chowkats or frame with shutter, (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 sqm each and removing to store yard complete all as specified and as directed. | BI01010001010000000000000515BI0100001116 | 5 | Each |
|---|
| 5 | 5 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 sqm each and removing to store yard complete all as specified and as directed. | | 12 | Each |
|---|
| 6 | 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed | | 14 | Sqm |
|---|
| 7 | 7 | Taking down cement plaster on brick/concrete surfaces work wall including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. | | 320 | Sqm |
|---|
| 8 | 8 | Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for and removing rubbish from site of work complete all as directed. | | 5 | Cum |
|---|
| 9 | 9 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm below or above ground level including removal of demolished materials from work site complete all as specified and as directed | | 13 | Cum |
|---|
| 10 | 10 | Demolition of precast concrete block walling built in cement mortar and removing materials from site of work complete all as directed. | | 25 | Cum |
|---|
| 11 | 11 | Supply and fix plain Galvanised mild steel sheeting conforming to IS-277-2003 as in ridges, hips, valley gutters etc of 0.63 mm thick with Zinc coating 275 gm / Sqm fixed with L Type or J type or cranked bolts complete all as specified and as directed. | | 55 | Sqm |
|---|
| 12 | 12 | S & F 0.63mm thick galvanised, corrugated mild steel sheeting (having 275 gms zinc coating per Sqm of Sheet area) with two corrugation side lap, fixed with L-type or J- type or cranked hook bolts and washers, in roofs, walls etc complete all as specified and as directed. | | 150 | Sqm |
|---|
| 13 | 13 | All as per Srl Item No. 12.00 here-in-before but except sheeting complete all as specified and as directed. | | 140 | Sqm |
|---|
| 14 | 14 | M&L for preparation of old zinc or galvanised steel surfaces of any description over 10cm in width or girth, not otherwise described by coating with mordant solution to receive painting and applying one coat of synthetic enamel paint complete all as specified and as directed. | | 140 | Sqm |
|---|
| 15 | 15 | M&L for preparation of newly zinc or galvanised steel surfaces of any description over 10cm in width or girth, not otherwise described by coating with mordant solution to receive painting and applying two coats of synthetic enamel paint complete all as specified and as directed. | | 205 | Sqm |
|---|
| 16 | 16 | S & F 4 mm thick, plywood, 5 ply, grade BWR type BB fixed with nails to timber frame work as in wall/ ceiling flat or sloping complete all as specified and as directed. | | 450 | Sqm |
|---|
| 17 | 17 | M&L for 2nd class hard wood fillets square, rectangular or triangular in section, clean, swan & secured with nails etc area exc 3 Sqcm but n.exc 6 Sqcm complete all as specified and as directed. | | 800 | RM |
|---|
| 18 | 18 | M&L well seasoned second class hard wood scantlings in clean sawn complete all as specified and as directed. | | 1.67 | Cum |
|---|
| 19 | 19 | All as per Srl item No. 18.00 here-in-before but except materials complete all as specified and as directed. | | 2.1 | Cum |
|---|
| 20 | 20 | S&F 2nd class hardwood chowkats, plained, solid, straight, wrought, framed, rebated on the solid put together with glue, pinned at joints complete all as specified and as directed. | | 0.6 | Cum |
|---|
| 21 | 21 | S & F 25 mm thick flush shutter conforming to IS-2202-(Part-2) solid core construction, with block board core and plywood face panel, commercial type on both side complete all as specified and directed. | | 10.7 | Sqm |
|---|
| 22 | 22 | S&F 30 mm thick well seasoned second class hardwood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.24 (a) supplied and fitted to chowkats complete all as specified.. | | 18 | Sqm |
|---|
| 23 | 23 | S&F 100mm size MS butt hinges medium weight cold rolled fixed to frame complete all as specified and as directed. | | 30 | Each |
|---|
| 24 | 24 | S&F 75mm size MS butt hinges medium weight cold rolled fixed to frame complete all as specified and as directed. | | 40 | Each |
|---|
| 25 | 25 | S&F 250 mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. | | 5 | Each |
|---|
| 26 | 26 | S & F 150mm size aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. | | 20 | Each |
|---|
| 27 | 27 | S & F 100mm size aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. | | 30 | Each |
|---|
| 28 | 28 | S & F 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as directed. | | 20 | Each |
|---|
| 29 | 29 | S & F 100 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as directed. | | 48 | Each |
|---|
| 30 | 30 | M & L applying one coat of synthetic enamel paint including preparation of old wooden surfaces exc 10 cm width or girth, complete all as specified and as directed. | | 25 | Sqm |
|---|
| 31 | 31 | M & L applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces over 10 cm width or girth, complete all as specified and as directed. | | 450 | Sqm |
|---|
| 32 | 32 | S&F 0.56mm thick plain, aluminium sheeting, alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) complete all as specified and as directed. | | 3 | Sqm |
|---|
| 33 | 33 | S&F stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. | | 15 | Sqm |
|---|
| 34 | 34 | M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. | | 20 | Sqm |
|---|
| 35 | 35 | S&F in repairs aluminium powder coated decorative type drapery curtain rod plain or colour of 20 to 25mm dia as approved with teak wood, fixing brackets, stops, rollers etc complete all as specified and as directed. | | 20 | RM |
|---|
| 36 | 36 | M&L non-skid ceramic tiles coloured tiles 7 to 8 mm thick premium quality conforming to IS- 13712, grade B-II-(a) (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including a layer of screed bed 15 mm thick in cement mortar 1:6 finished even and rough complete all as specified and as directed. | | 309 | Sqm |
|---|
| 37 | 37 | M&L for factory made precast cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) block masonry with machine pressed solid blocks, exc. 10 cm in width and set in cement mortar 1:6 complete all as specified and as directed. | | 25 | Cum |
|---|
| 38 | 38 | M & L 15 mm thick rendering in cement mortar (1:6) on fair faces of concrete surfaces finished even and fair without using extra cement complete all as specified and as directed. | | 149 | Sqm |
|---|
| 39 | 39 | M & L 20 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed. | | 159 | Sqm |
|---|
| 40 | 40 | M&L preparing new plastered surfaces of wall and applying three coats of white wash on wall complete all as specified and as directed. | | 149 | Sqm |
|---|
| 41 | 41 | M & L applying two coats of cement based paint on newly plastered wall surface over a coat of alkali resistant primer including preparation of surfaces, complete all as specified and as directed. | | 159 | Sqm |
|---|
| 42 | 42 | M & L Reinforced Cement Concrete (Nominal Mix) type B 1, 1:2:4 (20mm graded stone agg) as in beams, cantilevers, lintels, over 1.5 m span complete all as specified and as directed. | | 0.56 | Cum |
|---|
| 43 | 43 | M&L TMT bars 10mm dia and over, as reinforcement. cut to length, bent to shape required including crancking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips conforming to IS 1786 complete all as specified and as directed. | | 69 | Kg |
|---|
| 44 | 44 | M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length , bent to shape required including cranking bending hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to IS 1786 complete all as specified and as directed. | | 60 | Kg |
|---|
| 45 | 45 | M&L for Cutting out concrete blocks, slabs, brickwork or stone masonry (in alternate course), forming tooth-ings for and bonding new work in mortar into old work, including new materials entering old wall except block or slab set in cement mortar 1:6 complete all as specified and as directed. | | 1.5 | Sqm |
|---|
| 46 | 46 | M&L for 40mm thick PCC 1:2:4 type B1 (using 20mm stone aggregate) as in flooring and finishing even and smooth using extra cement etc complete all as specified and as directed. | | 200 | Sqm |
|---|
| 47 | 47 | M&L for 75mm thick PCC (1:3:6) type C2 (40mm graded aggregated) as in plinth protection/ path/ hard standing etc. and finishing concrete surface even and smooth without using extra cement complete all as specified and as directed. | | 50 | Sqm |
|---|
| 48 | 48 | M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain including necessary formwork complete all as specified and as directed. | | 1.17 | Cum |
|---|
| 49 | 49 | M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds mitred/ stopped complete all as specified and as directed.\n(Note : Inner girth shall be measured) | | 30 | RM |
|---|
| 50 | 50 | Note:- The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. | BI01010001010000000000000515BI0100001128 | | |
|---|
