Provision Of Security Wall Including Hardstanding Near Guard Post Alongwith Allied Services For Bldg No . Mes-T/42 Of Pro Shiilong Including Certain Sanctioned Works At Shillong Cantt Area Under Ge Shillong .

Tender Notice

23652026
Provision Of Security Wall Including Hardstanding Near Guard Post Alongwith Allied Services For Bldg No . Mes-T/42 Of Pro Shiilong Including Certain Sanctioned Works At Shillong Cantt Area Under Ge Shillong .
Indian
Meghalaya
15-02-2020
20-02-2020
21-02-2020

Tender Details

Provision Of Security Wall Including Hardstanding Near Guard Post Alongwith Allied Services For Bldg No . Mes-T / 42 Of Pro Shiilong Including Certain Sanctioned Works At Shillong Cantt Area Under Ge Shillong .

Key Value

Document Fees
INR 500 /-
EMD
INR 58000.00 /-
Tender Value
INR 29 Lakhs /-

BOQ Items

Name of Work: PROVN OF SECURITY WALL INCLUDING HARDSTANDING NEAR GUARD POST ALONGWITH ALLIED SERVICES FOR BLDG NO. MES-T/42 OF PRO SHIILONG INCLUDING CERTAIN SANCTIONED WORKS AT SHILLONG CANTT AREA UNDER GE SHILLONG.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Demolition of precast concrete block walling built in cement mortar complete all as specified and as directed. 1 CUM
2 2 Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. 1 CUM
3 3 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed by Engineer-in- Charge. 61 SQM
4 4 Taking up or down steel tubing with connections of 15 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed. 2 RM
5 5 Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed. 2 RM
6 6 Taking down chowkats or frames exc. 1.5 Sqm but n. exc. 4 Sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed. 6 EACH
7 7 Taking down chowkats or frames n. exc. 1.5 Sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed. 5 EACH
8 8 S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. 70 KG
9 9 S&F powder coated (powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges ,door closer, anodised aluminium snap beading, screws etc complete all as specified and as directed. 22.1 SQM
10 10 S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) etc complete all as specified and as directed. 32.9 SQM
11 11 S&F 4.80 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed. 15 SQM
12 12 S&F 4.80 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed. 12 SQM
13 13 M&L for Prelaminated particle board of 12 mm thick ,interior grade ,prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work etc complete all as specified and as directed. 15 SQM
14 14 M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C1, using 20 mm graded stone aggregate, exc 10 Cm width and setting in cement mortar 1:6 complete all as specified and directed.\n 28 CUM
15 15 M&L for Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C1, using 20 mm graded stone aggregate, 10 Cm width and setting in cement sand mortar (1:4) complete all as specified and directed.\n 5 SQM
16 16 Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed. 75 SQM
17 17 M&L for Rendering, 15 mm thick plaster in cement sand mortar( 1:4), in two layers, top 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a coat of 10 mm thick base coat in cement sand mortar (1:6) , finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.\nNote WPC shall be measured and paid separately. 270 SQM
18 18 M&L for rendering 15 mm thick cement plaster in cement sand mortar (1:6) over brickwork or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed 47 SQM
19 19 Supply only integral water proofing compound, ISI marked.complete all as specified and as directed. 14.15 KG
20 20 M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, dark shade ,area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm,as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile , laid over and including 20mm thick screed bed in cement sand mortar ( 1:6 ) , etc complete all as specified and as directed. 12 SQM
21 21 All as per item no. 20.00 here in above but in vertical surfaces such as skirting / dado ,laid over and including 10mm thick screed bed in cement sand mortar ( 1:4 ) ,jointed pointed with coloured cement to match the tiles etc complete all as specified and as directed. 6 SQM
22 22 M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade ,area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile , laid over and including 20mm thick screed bed in cement sand mortar ( 1:6 ) etc complete all as specified and as directed. 50 SQM
23 23 All as per item no. 22.00 here in above but in vertical surfaces such as skirting / dado ,laid over and including 10mm thick screed bed in cement sand mortar ( 1:4 ) ,jointed pointed with coloured cement to match the tiles etc complete all as specified and as directed. 5 SQM
24 24 M&L for Precast coloured prepolished chequered cement concrete tiles of size 300 x 300 X 25 mm thick of approved make, laid over and including 20 mm thick cement sand bed 1:6 match with grey cement and pigment complete allas specified. 41 SQM
25 25 M&L for Glazed ceramic colour tiles of size 300 x 450 or 300 x 600, 7mm thick as in vertical surfaces of wall such as skirting , dado, riser etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed. 56 SQM
26 26 M&L for Granite slab ( as in table top rubbed and polished ) (of any type) ,20 mm thick , machine cut , bedded and jointed with grey cement and pointed with white cement with admixtures over and including 15mm thick screed bed in cement sand mortar 1:4 etc complete all as specified and as directed 15 SQM
27 27 M&L for 20-25 mm thick kota stone slab flooring over and including cement screed bed 20 mm thick in cement sand mortar 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc complete all as specified and as directed. 5 SQM
28 28 M&L for RCC (nominal mix) type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings and in shelves and the like complete all as specified and directed.\n 2.1 CUM
29 29 M&L for Formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landing and similar items (horizontal or sloping), rough finished flat surfaces etc complete all as specified and as directed. 26 SQM
30 30 M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed. 1969 KG
31 31 M&L for preparation of old or previously treated surfaces of wall and applying one finishing coat of oil bound distemper over and including provision of thin layer of wall care chalk whitening putty etc complete all as specified and as directed. 15 SQM
32 32 M&L for preparation of new or previously untreated surfaces of wall and applying two finishing coats of oil bound distemper over and including provision of 3 mm thick layer of wall care chalk whitening putty etc complete all as specified and as directed. 50.4 SQM
33 33 Suppplying,fixing and testing of Scrub station made of stainless steel body of grade 304 fully automatic controlled by sensors , triggered 'ON' due to presence of scrubing person including the flow of soap , operated by 'Knee' or 'Foot', of size 2000 mm(L) x 600 mm(W) x 1750mm (H) of new model with LED light with minimum warranty of 1 year etc complete all as specified and as directed. Make BIOX / Western India Electromedical / Blue star Sanitary Industries Pvt Ltd / Modular Hospitech Pvt Ltd 1 EACH
34 34 Earth filling under floors including spreading, leveling in layers n.exc 25cm thick including well ramming and watering as reqd etc complete all as specified and as directed.Note:- Earth ( excavated soil ) obtained from item no.71.00 shall be used under this item.Conratctor shall quote rate for labour only. 1.5 CUM
35 35 M&L for PCC (1:4:8), type D2 (using 40 mm graded stone aggregate) 75 mm thick as in sub base , finished even and rough etc complete all as specified and directed. 10.5 SQM
36 36 M&L for PCC (1:3:6), type C-2 (using 40 mm graded stone aggregate) , 75 mm thick as in plinth protection including necessary formwork etc complete all as specified and directed. 7.5 SQM
37 37 M&L for Formwork to to sides of foundation ,footings, Plinth beam,etc finished in rough surfaces etc complete all as specified and as directed. 73 SQM
38 38 M&L for Formwork chullah hoods, chajjas, troughs and similar including edges,RCC Columns,Piers and Posts etc finished rough and flat etc complete all as specified and as directed. 18.5 SQM
39 39 M&L for RCC (nominal mix) type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in foundation, footing, plinth beam, bases for columns etc and mass concrete complete all as specified and directed.\n 2.8 CUM
40 40 M&L for RCC (nominal mix) type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in Beams,cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed.\n 0.05 CUM
41 41 M&L for RCC (nominal mix) type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in columns, pillars, posts etc complete all as specified and directed.\n\n 1 CUM
42 42 M&L for PCC (1:2:4), type B-0 (using 12.5 mm graded stone aggregate) laid above PCC sub floor and finishing rough to receive tiles etc complete all as specified and directed. 10.5 SQM
43 43 S&F 4.0 mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares exc 0.5 sqm in each pane etc complete all as specified and directed. 4.5 SQM
44 44 S&F GI tubing 15 mm dia medium grade with all necessay GI fittings such as tees , elbows etc fixed in wall, ceiling or floor with necessary clamp or hook etc complete all as specified and as directed. 26 RM
45 45 S&F GI tubing 20 mm dia medium grade with all necessay GI fittings such as tees , elbows etc fixed in wall, ceiling or floor with necessary clamp or hook etc complete all as specified and as directed. 5 RM
46 46 S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. 1 EACH
47 47 Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good to disturbed surface in Cement sand mortar 1:3 etc complete all,as specified and as directed. 6 RM
48 48 S & F 15 mm bore brass chromiun plated fancy bib taps, ,two way complete all as specified and directed.Make:- Jaquar cat part no. CON-041KN or equivalent make in Hindware / Prayag. 2 EACH
49 49 S & F 75 mm dia cast iron nahani trap with grating including jointing to waste pipe fixed in plain cement concrete (1:2:4) type B-1 ( using 20 mm graded stone aggrgate ) etc complete all as specified and directed. 1 EACH
50 50 S&F cast iron waste and vent pipes in any length with or without ears pipes, 75 mm dia, laid in trenches or floor cast class A, in any length with cement joints etc complete all as specified and as directed. 2 RM
51 51 S&F Gl frame work for snap grid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using GI wire of 2mm thickness GI frame shall be 60 x 60 cm to recieve E-board ceiling etc complete all as specified and as directed . 10.5 SQM
52 52 S&F 4mm thick E Board 600 x 600 mm pre-painted fibre boards ceiling designer / decorative type with different designs as approved fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping all as per manufacturer instruction etc complete all as specified and as directed.. 10.5 SQM
53 53 S&F Pre-painted Galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick as in roof covering of tensile stength 550 mpa including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour etc complete all as specified and directed 3 SQM
54 54 M&L for preparation of new plastered surfaces of wall and applying two coats of white or tinned with cement base paint over and including a coat of wall primer etc complete all as specified and directed. 40 SQM
55 55 Excavation in post holes not exceeding 0.5 cum, getting out in soft / loose soil , returning, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exceeding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 m and making good to disturbed surface etc complete all as specified and as directed. 15 EACH
56 56 Rough excavation not exceeding 1.5 m deep and getting out, in soft/loose soil etc complete all as specified and directed. 45 CUM
57 57 Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil etc complete all as specified and as directed. 246 SQM
58 58 M&L for PCC (1:2:4), type B-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. 2.1 CUM
59 59 M&L for Rolled MS sections as in main and cross beams, hip and jack rafters,posts,purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. 1702 KG
60 60 M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. 118 SQM
61 61 M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. 50 SQM
62 62 M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc.complete all as specified and as directed. 24.55 CUM
63 63 M&L for100 mm thick PCC, type D-2, (1:4:8, using 40 mm graded stone aggregates) as in sub base of floor etc and finishing the cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed. 190 SQM
64 64 M&L for 60mm thick pre-polished coloured, rubber moulded ,machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, M-35 grade laid over and including 50mm thick sand cushion ( watered and well rammed with water before laying of block) etc complete all as specific and as directed 30 SQM
65 65 M&L for 80mm thick pre-polished coloured, machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006, M-40 grade laid over and including 50mm thick sand cushion ( watered and well rammed with water before laying of block) etc complete all as specific and as directed 140 SQM
66 66 M&L for PCC (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in coping and similar works etc complete all as specified and directed. 1.7 CUM
67 67 M&L for Pre-cast cement concrete 1:2:4, type B1 using 20mm graded stone aggregate, landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement sand mortar 1:4 and placed at any location including necessary formwork complete all as specified and as directed. 0.8 CUM
68 68 Excavating over areas, n exc 1.5 m deep and getting out\n in soft/loose soil etc complete all as specified and directed. 67.5 CUM
69 69 Excavating over areas, exc 1.5 m but n.exc 3.00 m deep and getting out in soft/loose soil etc complete all as specified and directed. 67.5 CUM
70 70 Excavating over areas, exc 3.00 m but n.exc 4.5 m deep and getting out in soft/loose soil etc complete all as specified and directed. 45 CUM
71 71 Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, etc n exc 10 sqmtr on plan, in soft/loose soil and getting out complete all as specified and directed. 43 CUM
72 72 M&L for PCC (1:4:8), type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. 21.35 CUM
73 73 M&L for Walling of random rubble, stone masonry uncoursed well bounded bedded and solidly hearted random or polygonal rubble walling, brought up to course, built in cement sand mortar 1:6 complete all as specified and as directed. 60 CUM
74 74 Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses surface not exceeding 40 mm etc complete all as specified and as directed. 45 SQM
75 75 M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement sand mortar 1:4 etc complete all as specified and as directed. 4.5 10 SQM
76 76 M&L for Hand packing tightly or boulder ( crushed stone) filling of gauge 80 to 150 mm (any thickness) at back of retaining wall etc. and raising (or lowering) to the required level etc complete all as specified and as directed. 40 CUM
77 77 Removing excavated materials (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed. 289.5 CUM
78 78 Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. 11.5 CUM
79 79 S & F 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint as in weep holes etc complete all as specified and directed. 13 RM
80 80 M&L for PCC (1:3:6), type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. 4 CUM
81 81 M&L for RCC (nominal mix) type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete complete all as specified and directed.\n 11 CUM
82 82 M&L for RCC (nominal mix) type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.\n 8 CUM
83 83 M&L for RCC (nominal mix) type A-1 (1:1.5:3) (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.\n 7 CUM
84 84 M&L for Formwork to sides of pillars, posts, columns and similar work, rough finished flat square or rectangular surfaces etc complete all as specified and as directed. 90 SQM
85 85 M&L for Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, slabs, shelves including supports etc. rough finished flat surfaces etc complete all as specified and as directed. 50 SQM
86 86 M&L for Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. 1038 KG
87 87 M&L for preparation of new plastered surfaces of wall including cornices, pilasters etc and applying two coats of white wash etc complete all as specified and directed 170 SQM
88 88 Supply , fixing or embedding broken glass as coping on top of wall in cement sand mortar 1:3 etc complete all as specified and directed. 10 SQM
89 89 M&L for Mild steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 102 KG
90 90 M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.Make:- M/s A-1 Fence Products Company Pvt Ltd. or equivalent and approved. 2 100 RM
91 91 M&L Point wiring ( concealed ) with single runs PVC insulated FRLSH grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sqmm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping of suitable size with all fittings and accessories including PVC rectangular board of suitable size and drawing continuous earth wire of PVC insulated FRLSH grade, unsheathed stranded copper conductor of size 1.5 Sqmm (ISI Marked) as continuous earth wire terminated in and including sunken box for following type of point wiring including making good disturbed of wall complete all as specified in SSR Part-I, 2009 and Part-II, 2010 and as directed by Engineer-in- Charge for one light point / one 3 pin socket outlet 5/6 Amps and one bell point on independent board controlled by one one way switch.\n\n \n 4 PER POINT
92 92 All as per item No 91.00 above but for one 2/3 pin socket outlet 5/6 Amps point on same board etc complete all as directed by Engineer -in -Charge . 1 PER POINT
93 93 All as per item No 91.00 above but for one 2/3 pin socket outlet 5/6 Amps point on independent board etc complete all as directed by Engineer -in -Charge . 1 PER POINT
94 94 All as per Item No. 91.00 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 4.0 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 4.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. 1 PER POINT
95 95 Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5 Amps complete all as specified and directed. 4 EACH
96 96 Supply and fix Switch socket combination (ISI marked), 2/3 pin and 5/6 Amps, flush type, 240 volts complete all as specified and as directed. 2 EACH
97 97 Supply and fix Switch socket combination (ISI marked), 2/3 pin and 15/16 Amps, flush type, 240 volts complete all as specified and as directed. 1 EACH
98 98 S&F Ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed. 4 Each
99 99 Supply & Fixing wall mounted LED batten fitting, 1X18 watt, AC, 230 Volts, 6500K fixed to wall with two Nos PVC block of suitable size all as specified and as directed by Engr-in Charge. Make:- Crompton cat part no. LCTL 18 CDL or equivalent make in Bajaj / Philips /Philips. 3 EACH
100 100 Supply and fixing LED building security light 25 watt, pressure die cast aluminium housing , heat resistant glass , IP 65 protection , better optics for uniform distribution complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light including bracket of suitable size etc complete all as specified and directed.Make:- Bajaj Cat Part 169821 LED or CG cat part no. LSTO 25 CDL or Magik cat part no. SPFL030C. 1 EACH
101 101 Supply and fix MCB Distribution board , 240 volts Single pole and neutral ,single door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engineer -in- Charge . Make : Make: Havells, Cat Part No:DHDPSHODRW08 or equivalent model from make:- Siemens / Schneider / Legrand / L&T. 1 EACH
102 102 Supply and fix MCB DP, 240 Volt, 6 to 32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. Make: Havells Cat Part No:DHMCCDPF006-32 or equivalent model from make:- Schneider / Legrand. 1 EACH
103 103 Supply and fix MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed . Make: Havells Cat Part No:DHMGCSPF006-32 or equivalent model from make:- Schneider / Legrand. 6 EACH
104 104 Material and labour for sub main wiring (concealed) with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, .(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR cable/KEI, PVC Casing Capping- Presto plast/Finolex/Kalinga. 50 RM
105 105 Supply, fixing and testing , electrically driven water heater (Geyser) , storage and vertical type, BEE 5 star rating , 25 litre capacity , grouting with new GI nut & bolts of suitable size including necessary incoming and outgoing electric and water connections with hot / cold PVC pipes suitable for geyser etc complete all as specified and directed. Make: Havells Monza DX product code GHWCAMTWH025 or equivalent to Bajaj / Venus / Racold 1 EACH
106 106 S&F PVC Connections 15mm size with PTMT nuts of length 450mm, heat resistant for hot and cold water etc complete all as specified and as directed. 1 SET OF 2
107 107 Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I etc complete all as specified and as directed. 1 Each Job
108 108 S & F 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed.Make:- Jaquar / Hindware / Prayag. 1 EACH
109 109 S & F 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.Make:- Jaquar / Hindware / Prayag. 2 EACH
110 110 M&L for sand (river sand) filling under floors or in foundations including watering and consolidation etc complete all as specified and as directed. 1.2 CUM
111 111 M&L for Pre cast cement concrete 1:3:6 type C-1 (using 20 mm graded aggregate) as in bond stones and similar works and setting in cement sand mortar 1:6 in joints to match etc complete all as specified and directed. 5 CUM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail