Special Repair To Bldg No Dsm-12 Sainik Aramgarh Under Ge Shillong

Tender Notice

23651367
Special Repair To Bldg No Dsm-12 Sainik Aramgarh Under Ge Shillong
Indian
Meghalaya
15-02-2020
05-03-2020
07-03-2020

Tender Details

Special Repair To Bldg No Dsm-12 Sainik Aramgarh Under Ge Shillong

Key Value

Document Fees
INR 500 /-
EMD
INR 35000.00 /-
Tender Value
INR 17.50 Lakhs /-

BOQ Items

Name of Work: SPECIAL REPAIR TO BLDG NO DSM-12 SAINIK ARAMGARH UNDER GE SHILLONG
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed. 350 Sqm
2 2 Dismantling of timber scantling 40 sqcm over in section in any position (unframed work). 1.5 Cum
3 3 All as per item No 02 herein before but as in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section. 50 RM
4 4 Dismantling boarding of any description fixed in any position with nails/screws and removing unserviceable materials from site of work complete all as directed by the Engr-in-Charge 10 Sqm
5 5 Dismantling of wall and ceiling boards ( fibre, insulation, etc.) as in lining of any gauge or any thickness including cover fillets all as directed. 190 Sqm
6 6 Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 305 Sqm
7 7 Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level) and removing debris from site of work complete all as directed by the Engineer-in-Charge. 5 Cum
8 8 Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 sqm each and making good the disturbed surfaces and removing unserviceable materials from site of work complete all as directed by the Engineer-in-Charge. 5 Each
9 9 Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm and n.exc 4 sqm each and making good the disturbed surfaces and removing unserviceable materials from site of work complete all as directed by the Engineer-in-Charge. 30 Each
10 10 M&L for Vitrified Ceramic tiles light shed , double charged 10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified 185 Sqm
11 11 All as per item No 10 herein before above but on vertical surfaces over 10mm thick rendering in CM1:4 15 Sqm
12 12 M&L for 20mm thick Granite machine cut over and including 15mm thick screed bed in CM 1:4 , bedded, jointed and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, moulding and polishing etc complete all as specified. 10 Sqm
13 13 M&L for Glazed ceramic colour tiles in vertical surface of size 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour over including 10mm thick backing coat in CM 1:4 complete as specified and directed 85 Sqm
14 14 M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed 10 Sqm
15 15 Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment also refixing buildings hardware as required all as specified and directed 5 Each
16 16 Material and labour for 12mm thick seamless calcium silicate POP finished ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete including two coats of oil bound distemper complete all as specified and directed.\nNote: Frame work for ceiling shall be measured and paid separately under respective item. 190 Sqm
17 17 M & L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners including suspenders, with and including ceiling section of 0.55 mm thickness having knurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and fix complete all as specified in SSR Part-I and as directed. 190 Sqm
18 18 S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering 0.50mm thick including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed 320 Sqm
19 19 S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering/valley gutter/eaves board 0.50mm thick including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed 30 Sqm
20 20 S&F 2nd class HW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as directed. 10 Sqm
21 21 S&F 2nd class HW in scantling clean sawn timber fixed with nails complete all as specified and directed. 1.5 Cum
22 22 M&L plain fillets square rectangular or triangular in section clean sawn secured with nails or brads (2nd class hard wood) sectional area exceeding 13 sqm n exceeding 25 sqcm all as specified. 50 RM
23 23 Taking up and down 15 mm bore GI tubing and connections including cleaning for refixing or remove to store complete all as specified and directed. 10 RM
24 24 Taking up and down 20 mm bore GI tubing and connections including cleaning for refixing or remove to store complete all as specified and directed. 10 RM
25 25 Supply and Fixing in replacement of GI Tubing medium grade 15mm bore laid in trenches and as wall `complete including cuttings chases in walls and making good, cutting portion all as specified and directed. 10 RM
26 26 Supply and fixing in replacement of GI Tubing medium grade 20mm bore laid in trenches and as wall `complete including cuttings chases in walls and making good, cutting portion all as specified and directed. 10 RM
27 27 Supply and fixing in repair vitreous china squatting pan "ORISSA" pattern size 580 x 440mm white, ISI marked, with integral foot rests complete including provision of lean concrete bedding with PCC 1:4:8 type D-2 using 40mm graded stone aggregate and making good disturb floor complete all as specified and directed. 2 Each
28 28 Supply and Fixing in repairs PVC low level flushing cistern , white , 10 ltrs capacity with float valve and brackets complete including fixing low level flush pipe complete all as specified and directed. 2 Each
29 29 Supply and Fixing in repair Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting and coupling and waste pipe if cast iron bracket duly painted /erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and as directed. 2 Each
30 30 Supply and Fixing in repair fancy type pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure, with or without lettered 'hot or cold' with long screwed shank and fly nuts screw for iron pipe of bore 15mm and fixed all as specified . 2 Each
31 31 Supply and Fixing in repair 15mm Bore bib tap cast copper alloy chromium plated fancy type with crunch or butterfly handle screw down screwed for iron pipe or for brass funnel and fixed, complete all as specified and as directed. 5 Each
32 32 Supply and Fixing Stop valves, Cast copper alloy chromium plated Fancy type screwed down, high pressure, with crutch or butterfly handle concealed for 15mm bore complete all as specified and as directed. 5 Each
33 33 Supply and Fixing in repairs PVC connection 15 MM size with PTMT nuts of length 450MM complete all as specified and as directed. 4 Each
34 34 Supply and Fixing in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board of commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete. 2 Each
35 35 S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms) complete all as specified and directed. 2 Each
36 36 M&L for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination as in kitchen cabinet/cup-board complete all as specified and directed. 10 Sqm
37 37 Supply and fixing Continuous (Piano) hinges, brass, width of flaps 30 mm (when open) complete all as directed and specified. 5 RM
38 38 Supply and fixing magnet catches for cupboard shutter with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed 15 Each
39 39 Supply and Fixing Extruded brass handles, 100 mm size, fabricated type, polished all as specified and as directed 15 Each
40 40 Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for door shutters with extruded built up standard sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required and standard aluminium fittings like handles, door bolts and other required fittings etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /panelling, C.P.brass / stainless steel screws, all complete as per the directions of Engineer-in-charge. (Notes:- 1. The weight shall be of all aluminium components and fittings except the gaskets. 2. Door closer, mortise lock, door stopper, Glazing, wire mesh and panelling to be paid for separately and all other fittings shall be deemed to be included in the rate quoted.) 70 Kg
41 41 Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors/windows/ventilators and partitions with extruded built up standard sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including making provision for fixing of fittings wherever required including the cost of other required fittings etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, C.P.brass/stainless steel screws, all complete as per the directions of Engineer-in-charge. (Notes:- 1. The weight shall be of all aluminium components and fittings except the gaskets. 2. Glazing, wire mesh and panelling to be paid for separately and all other fittings shall be deemed to be included in the rate quoted.) 150 Kg
42 42 Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for windows and ventilator shutters with extruded built up standard sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including providing and fixing hinges/pivots/sliding track and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required and standard aluminium fittings like handles, bolts, stays, closing mechanisms and other required fittings etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /panelling, C.P.brass / stainless steel screws, all complete as per the directions of Engineer-in-charge. (Notes:- 1. The weight shall be of all aluminium components and fittings except the gaskets. 2. Glazing, wire mesh and panelling to be paid for separately and all other fittings shall be deemed to be included in the rate quoted.) 120 Kg
43 43 Supply and fixing Sheet glass, selected quality 5.5 mm thick, glazing not exceeding. 0.5 sqm in each pane, complete all as specified and as directed. \n 5 Sqm
44 44 Supply and fixing Sheet glass, selected quality 4 mm thick, glazing not exceeding. 0.5 sqm in each pane, complete all as specified and as directed. \n 15 Sqm
45 45 M & L stainless steel wire mesh, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. 25 Sqm
46 46 M & L Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover , governing pivot made of brass, other parts made of mild steel heavy duty and fixed 5 Each
47 47 Supply and Fixing Aluminium decorative grill of section size of mesh 50mm & 4mm dia fixed to window including frame works complete all as specified and as directed. 50 Kg
48 48 Supply and Fixing in repair decorative chromium plated curtain rod (drapery rod) 20mm dia including bracket complete all as specified and as directed 90 RM
49 49 Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, fixing in the frame at site as per specification & drawing. 2.7 Sqm
50 50 Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification complete all as specified and as directed. 10 RM
51 51 S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and as directed. 6 Each
52 52 S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and as directed 4 Each
53 53 S&F Extruded Aluminium, anodised, bow handles of size 150mm complete all as specified and as directed. 4 Each
54 54 M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. 20 Sqm
55 55 M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of Creosote complete all as specified and as directed 50 Sqm
56 56 Preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. 20 Sqm
57 57 M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drains complete all as specified. 5 Cum
58 58 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed. 90 RM
59 59 M&L 75 mm thick Cement concrete type C 2, 1:3:6 (using 40 stone aggregate) in plinth protection, finished even and smooth without using extra cement with and including all necessary formwork and to divide the area in panels and finishing exposed edges fair and rounding or chamfered with and including filling the joints with mastic filling, complete all as specified and as directed. 50 Sqm
60 60 M&L for complete removal of existing treatment of plastered surfaces of wall, and applying one coat of wall care putty (1.5 mm thick) and preparation of surface with cement priming paint and applying two coats of distemper oil emulsion, complete all as specified and as directed. 375 Sqm
61 61 M&L for complete removal of existing treatment of surface of wall and applying two coats of exterior weather coat ( 1st quality of approved make )over a coat of primer complete all as specified and directed by Engr-in-charge. 680 Sqm
62 62 Taking down carefully old unservicable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc. and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. 95 Each Point
63 63 Material and labour for point wiring with two single core PVC insulated unsheathed cable of size 1.5Sqmm nominal area with multi-stranded FRLSH copper conductor, 1100 Volt grade drawn through and including PVC non metallic surface casing capping, of suitable size with all fitting and accessories including suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139 ( pt-1) of 1969 with earth dolly and coated with two coats of anti corrosive powder coated paint over a coat of primer both internally and externally and making good to disturbed surfaces including PVC insulated and unsheathed, single core, multi-stranded, copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one light point / fan point/ one call bell point controlled by one 5 Amps one way switch complete as specified and directed. 56 Each Point
64 64 All as per item No 63.00 above but for one 3 pin socket outlet 5 Amps, on independent board. 16 Each Point
65 65 All as per item No 63.00 above but for one 3 pin socket outlet 5 Amps on same board alongwith other suitable switches. 12 Each Point
66 66 All as per item No 63.00 here-in-before but using 2.5 sqmm PVC FRLSH insulated copper conductor wire for connecting 15A socket on independent board complete all as specified/directed. 11 Each Point
67 67 Supply & fixing of modular switch one way 6 Amps 1 module 240 Volts complete all as specified / directed. 84 Each
68 68 Supply and fixing of modular socket 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed. 28 Each
69 69 Supply and fixing of modular socket 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed. 11 Each
70 70 Supply & fixing of modular switch one way 16 Amps 1 module 240 Volts complete all as specified / directed. 11 Each
71 71 Supply and fixing of modular white cover plate with frame 1 module complete all as specified. 15 Each
72 72 Supply and fixing of modular white cover plate with frame 2 module complete all as specified. 15 Each
73 73 Supply and fixing of modular white cover plate with frame 3 module complete all as specified. 10 Each
74 74 Supply and fixing of modular white cover plate with frame 4 module complete all as specified. 12 Each
75 75 Supply and fixing of modular white cover plate with frame 5 module complete all as specified. 4 Each
76 76 Supply and fixing of modular white cover plate with frame 6 module complete all as specified. 4 Each
77 77 Supply and fixing of ceiling rose 3 Phase PVC/Polycarbonate, isolated body complete all as specified/directed. 50 Each
78 78 Supply and fixing LED fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23.0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed. Make : Cat Part No: Bajaj Batten 112181 Batten for LED TUBE LIGHT fitting BLRB- DB 118. Bajaj Tube rod No BLRB-18 Watt CWc XE (112753) or Havell's Cat Part No: REGALBATTENT5UPTO1X18WDSBSWH for batten and TITANIANEO1213T8SSTL18WLED865SPC for tube light or its equivalent in Philips 17 Each
79 79 Supply and fixing LED fitting 1x9 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23.0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed. Make :Bajaj/Havells/Philips/Surya 3 Each
80 80 Supply and fixing for LED recessed square type doe lighter minimum 12 watt flat panel PDC aluminium housing and PMMA diffuser fixed to ceiling and connection complete all as specified and directed. Make : Havells/Philips/Bajaj/Surya 14 Each
81 81 Supply and fixing for wall bracket decorative LED light fitting with lamp 12 watt complete and connection complete all as specified and directed. Make : philips cat Part No 32032 or equivalent cat No of Havells/Bajaj/Surya 12 Each
82 82 S & F water heater storage type , 25 Ltrs vertical type geyser complete with all fittings and accessories , outer body of geyser should be ABS plastic inner with stainless steel , 230 V AC and maximum 1000 watts rating electric , BEE 5 star rated and including making PVC connection 15 mm dia and 450 mm length including chromium plated brass nuts ( hot water grading ) for incoming & outgoing hot & cold water and including grouting 4 Nos ,100 mm long 12 mm dia high quality stud bols,nuts, washer including making good to disturbed surface of wall using cement mortar 1 :4 and colour to match the existing colour complete all as directed. Make:- Havells Cat No GHWAPTTIV025 , Model : PURO TURBO or equivalent make and model CROMPTON CREAVES/Racold 1 Each
83 83 Supply and fixing exhaust fan PVC body 250mm sweep with louvers, AC single phase, including electrical connection with twisted 3 core PVC insulated flexible cord of size 0.75mm copper conductor from ceiling rose including making hole in wall and make good disturbed surface as per existing specification complete all as specified and directed Make:- HAVELLS MODEL- Ventilair Db or Equivalent of CROMPTON CREAVES/BAJAJ/ORIENT 4 Each
84 84 S&F for 25 mm dia GI tubing light grade bracket over all 1.2 mtr length with cutting as required and bend to shape with flat iron clamp of size 40 mm 2 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles including taking down old unservicable one complete all as specified and directed. 6 Each
85 85 Supply and fixing in repair 25 Watt capacity LED street light fittings in aluminium PDC housing, toughened glass cover, individual LEDs with secondary optics, covered with IP66 protection with inbuilt surge protection of minimum 5 KV including and repair/replacement warranty of minimum 3 years. Make: Surya SLE UL 25W IP66 LXN or BAJAJ CAT No 169821 LED its equivalent in Philips/Havells. 6 Each
86 86 Supply and fixing in repair of MCB TPN DB 4 way vertical type double door,IP-43 protection, isolated neutral bar , insulated busbar 200 Amps assembly, mechanical impact strength of IK08,suitable for MCCB's upto 125 Amps as incomer complete all as specified and directed by Engr-in-charge 1 Each
87 87 S&F MCCB,100 Amps 16kA, TPN, 415 volt adjustable all as specified and directed by Engineer-in- Charge. 2 Each
88 88 Supply and fixing in repair of MCB SPN DB 8 way double door,IP-43 protection, isolated neutral bar, insulated busbar with 100 Amps assembly, mechanical impact strength of IK08 complete all as specified and directed by Engr-in-charge. 3 Each
89 89 Supply & fixing of MCB DP 40 Amps 'C' Series 10 KA 240 volts complete all as specified/directed. 6 Each
90 90 Supply & fixing of MCB SP 6-32 Amps 'C' Series 10 KA, 240 volts complete all as specified/directed. 30 Each
91 91 M & L for sub main wiring with two single core 4 Sqmm PVC insulated unsheathed cable multi-stranded FRLSH copper conductor drawn through and including PVC casing capping of suitable size with all fittings and fixing accessories on roof, walls, ceiling etc. including 4 Sqmm PVC insulated unsheathed single core solid copper conductor earth wire including taking out old unserviceable cable complete all as specified and directed Note: Two run of single core cable and one run earth wire and casing capping will be measured as one length. 130 RM
92 92 Excavation in trenches in soft/loose soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cable and erection of poles all as specified and directed at site. 15 Cum
93 93 Removing excavated material not exceeding 50 m and depositing at a level n.exc 1.5 m above the starting point all as specified & directed by Engineer-in - Charge. 4 Cum
94 94 Returning, filling in including spreading, levelling, watering and well ramming excavated soft/loose soil in layers , all as specified and directed at site 11 Cum
95 95 M&L for sand cushioning to under ground cable using locally available fine clean dry river sand over, under ground UG cable laid in trenches and gently punning done complete all as directed by Engineer-in-Charge. Note : For the purpose of payment only punned thickness will be measured.\n 3.6 Cum
96 96 M & L for brick protection cover to LT underground cables with sub class ‘B’ over burnt brick, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed. 390 Each
97 97 Supply, laying connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 25Sqmm, 3.5 core laid through duct/pipe/in trench, etc. including taking down old one complete all as specified and directed. \nNOTE: Excavation and earth work will be measured and paid separately.\n 52 RM
98 98 Supply, laying and connecting GI tubing, light grade, 40mm bore with all fittings for protection of cable complete including taking down old one all as specified and directed. 12 RM
99 99 Material and labour for Earthing complete with galvanized steel earth plate 60cmx60cmx6mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI earth lead wire of 4 mm dia upto 7.50m up to test point by means of nuts, bolts, check nuts and washers, GI pipe 15mm bore light grade for cable protection, excavation and earth work, PCC 1:3:6 type C-1 pit, 20mm dia GI pipe medium grade, watering pipe and 15mm bore GI pipe, light grade for protection of earth wire, MS angle iron frame 40x40x3mm, 40mm thick RCC 1:2:4 type B-1 cover reinforced with 6mm dia MS bars @ 75mm C/C both ways and with MS handle made out of 12mm dia bars, PGI Funnel, wire mesh, charcoal and common salt in alternate layer of 15cm complete etc all as shown in electrical Plate No. 03 of SSR Part-I (2009) and connected to earthing test point including testing on completion and taking down old one complete all as specified and as directed. \n 2 Each Job
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail