| 1 | 1 | CIVIL\nEarth work in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking of clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. \n[A] Upto a depth of 2.00 m below the existing G.L\n(a) In ordinary soil | | 232.32 | cum |
|---|
| 2 | 2 | Earth / sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sale tax and other duties and Taxes as may be necessary. \n(b ) With hill sand obtained by truck carriage loading and unloading and carriage to the site of works | | 155.235 | cum |
|---|
| 3 | 3 | Providing and laying 25 mm thick damp proof course with cement concrete in proportion 1:1.5:3 with graded stone aggregate of 10 mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed. | | 15.437 | sqm |
|---|
| 4 | 4 | Providing and laying plain / reinforced cement concrete works cement with coarse sand & 20mm downgraded stone aggregate including dewatering if necessary, and curing complete but excluding the cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) \n(I) Using mixture machine\n(A) In sub - structure upto plinth level : In foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100 mm thick upto plinth level\nN) Without using admixture, plasticiser\n(b) M20 or Prop. 1:1.5:3 | | 48.597 | cum |
|---|
| 5 | 5 | Providing and laying plain / reinforced cement concrete works cement with coarse sand & 20mm downgraded stone aggregate including dewatering if necessary, and curing complete but excluding the cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) \n(I) Using mixture machine\n(B) In super- structure from plinth level upto 1st floor level:\nii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing.\n(b) M20 or Prop. 1:1.5:3 | | 67.12 | cum |
|---|
| 6 | 6 | Providing form work of ordinary timber planking so as give a rough finish including, centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of same for in-situ reinforced concrete and plain concrete work in:\nFoundation, footings, bases of columns, pile cap, raft and mass concrete works etc.\n(b) Using 25mm thick plank | | 96.96 | sqm |
|---|
| 7 | 7 | Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:\nColumns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face | | 195.84 | sqm |
|---|
| 8 | 8 | Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.\n(a) For depth not exceeding 1.0M. | | 376.85 | sqm |
|---|
| 9 | 9 | Flat Surfaces such as soffits of suspended floors, roofs, landings, cantilever slabs, chajjas, balconies and the like.\n(a) Floors etc. upto 200mm in thickness. | | 186.485 | sqm |
|---|
| 10 | 10 | Providing brick soling in Foundation and under floor with stone / best quality picked jhama bricks, sand packed and laid to level and in panel after preparing the sub-grade as directed including all labour and materials and if necessary dewatering, complete.\n(a) Brick on flat soling. | | 243.42 | sqm |
|---|
| 11 | 11 | 230 mm thick brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed in sub-structure upto plinth level .\n(d ) In proportion 1:6. Analysis for 1 m3 | | 21.304 | cum |
|---|
| 12 | 12 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embedded in cement mortar and will be measured and paid separately)\n(A) 112mm thick brick wall\n(b) In cement mortar in proportion 1:5. \n(1 cement:5 sand) | | 1648.2 | sqm |
|---|
| 13 | 13 | 65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1 cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1 cement : 1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed. | | 155.235 | sqm |
|---|
| 14 | 14 | Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg of cement per sq. m. of floor to be laid in panels including curing complete as directed.\n(b) 20 mm thick | | 205.235 | sqm |
|---|
| 15 | 15 | Cement plaster skirting inside and outside wall with cement mortar in proportion 1:3 finished with a floating coat of neat cement including rounding of junctions with floor.\n(a) 15mm thick etc. complete | | 101.2 | sqm |
|---|
| 16 | 16 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.\nb) In cement mortar 1:4 | | 3482.89 | sqm |
|---|
| 17 | 17 | Extra over item no 17 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed. | | 186.485 | sqm |
|---|
| 18 | 18 | Extra over item no 17 for interior plastering above 1st floor level for every additional floor or part thereof including curing complete as directed.\na) On Single coat plaster | | 870.721 | sqm |
|---|
| 19 | 19 | Extra over item no 17 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed.\na) On Single coat plaster | | 1120.72 | sqm |
|---|
| 20 | 20 | Extra over item no 17 for exterior plastering over wall for every additional floor or part thereof beyond 1st floor level including curing complete as directed.\na) On Single coat plaster | | 1120.72 | sqm |
|---|
| 21 | 21 | Providing, fitting and fixing factory made Santro Flush door shutters having core and cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly cross bands, styles and rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts, etc. as specified and directed at all levels (door fixtures and fittings to be measured and paid separately)\nii) 35 mm thick | | 60.48 | sqm |
|---|
| 22 | 22 | (a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand paper smooth. | | 3482.89 | sqm |
|---|
| 23 | 23 | (b) Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coat) to give an even shade after thoroughly brooming the surfaces to remove all dirt and remains of loose powdered materials. | | 3482.89 | sqm |
|---|
| 24 | 24 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter , sand papering and knotting. \n(b). With ready mixed paint, wood primer (white). | | 120.96 | sqm |
|---|
| 25 | 25 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.\n(i) Surfaces over 100mm in width or girth.\na) General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | | 120.96 | sqm |
|---|
| 26 | 26 | Applying primary coat over new steel and other metal surfaces over 100 mm in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.\n(a) With ready mixed \"red - lead / red oxide\" primer. | | 90.72 | sqm |
|---|
| 27 | 27 | Applying primary coat over new steel and other metal surface upto 100m in width or girth after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.\na). With ready mixed \"red-lead/ red oxide\" primer. | | 25.92 | rm |
|---|
| 28 | 28 | Painting two coat (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacturer ( Asian paint / Berger Paint/ ICI paint / J & N paint / Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.\n(i) Surfaces over 100 mm in width or girth.\n(a) General purpose ( Asian paint / Berger Paint/ ICI paint / J & N paint / Nerolac) | | 90.72 | sqm |
|---|
| 29 | 29 | Painting two coat (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacturer ( Asian paint / Berger Paint/ ICI paint / J & N paint / Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.\n(ii) Surfaces upto 100 mm in width or girth.\n(a) General purpose ( Asian paint / Berger Paint/ ICI paint / J & N paint / Nerolac) | | 25.92 | rm |
|---|
| 30 | 30 | Supplying, fitting, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\n (b) Tower bolt - (iii) 200 x 12 mm | | 92 | each |
|---|
| 31 | 31 | Supplying, fitting, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\n(a) Sliding door bolts - (i) 300mm x 16mm | | 24 | each |
|---|
| 32 | 32 | Supplying, fitting, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished )\n(c) Door handles- (iii) 150 mm | | 70 | each |
|---|
| 33 | 33 | Providing and fixing clear sheet glass bedded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately)\n(2). Area of glass panes exceeding 0.15 sqm but not exceeding 0.52 sqm.\nb) 4.00 mm thick. | | 45.36 | sqm |
|---|
| 34 | 34 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) \nFrom Primary Producer: TATA/SAIL/ Esser Steel/ Jindal steel/Shyam steel/RINL\nSuper Ductile (SD) TMT reinforcement bars | | 124.43 | qtl |
|---|
| 35 | 35 | Providing, fitting and fixing steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. \na) Openable | | 31.185 | sqm |
|---|
| 36 | 36 | Providing, fitting and fixing steel ventilators (openable) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, handles, pegs, stays of 300mm long etc. complete including providing 2nos. of 12mmx12mm sq. bars (horizontal) duly welded to steel frame and applying a priming coat of red oxide paint etc. complete as per drawing. | | 14.175 | sqm |
|---|
| 37 | 37 | Supplying, fitting, and fixing door frame made of M.S. equal angle, of size 40mmx40mmx5mm fabricated, welded, mitred and joined as per relevant I.S. Codes including fitting 8 nos. of M.S. hold fast, providing closing/ holding device for 2 nos. tower bolts of door for each side and 1 no. for fitting and fixing aldrop (for single leaf) to the frame for fixing the door to the frame, applying primer to all steel surfaces fixing the frame to the wall /R.C.C. members by embedding the hold fast securely in C.C. block of M-15 grade complete at all levels as specified and directed.(Door hinges to be paid as per relevant item of the schedule of rates) | | 12.96 | rm |
|---|
| 38 | 38 | Providing plinth protection with brick flat made in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with the floating coat of neat cement finish. | | 51.375 | sqm |
|---|
| 39 | 39 | Providing barge board of size 200mm x 20mm with 1st class local Hollock/Bonsum/Sundi timber including fitting and fixing with necessary wood screws etc. complete. | | 64.56 | rm |
|---|
| 40 | 40 | Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.) \nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement\n(iii) 0.50 mm thick | | 197.6 | Sqm |
|---|
| 41 | 41 | Providing Pre Painted Galvalume Sheet (PPGL) accessories ( Ridges / Valley / Gutter / Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete.\nTATA Blue scope/ Dyna roof / Durakolor /Wonder Roof or equivalent as directed by the Departement\n(iii) 0.50 mm thick | | 23.4 | RM |
|---|
| 42 | 42 | Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. \nb) Using other ISI marked approved circular hollow section | | 7.859 | qtl |
|---|
| 43 | 43 | Providing, fitting and fixing 24mm/29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid separately)\n(a) 24mm thick | | 8.82 | sqm |
|---|
| 44 | 44 | Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified.\n(b) Other than Guwahati city | | 150 | cum |
|---|
| 45 | 45 | Water supply & Sanitary\nProviding fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately\n(B) Nirali\n(ii) Glister Super (Bowl Size - 535 x 432 x 200) Glossy | | 4 | each |
|---|
| 46 | 46 | Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe\n(B) Concealed pipe with cutting chases & making good the walls\na) 15 mm nominal outer dia pipe | | 12 | rm |
|---|
| 47 | 47 | Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe\n(B) Concealed pipe with cutting chases & making good the walls\nb) 20 mm nominal outer dia pipe | | 47.4 | rm |
|---|
| 48 | 48 | Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe\n(B) Concealed pipe with cutting chases & making good the walls\nc) 25 mm nominal outer dia pipe | | 94.8 | rm |
|---|
| 49 | 49 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. \nAgmeco (classic) \n(b) Round | | 4 | each |
|---|
| 50 | 50 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) \nSona brand\n(a) 15mm dia Stop cock male-female /Angle stop cock | | 10 | each |
|---|
| 51 | 51 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.\n(A) Parryware Make\n(a) White\n(iv) Flat Back (Cat. No.C0501/72) | | 4 | each |
|---|
| 52 | 52 | Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)\ni) Parryware make\na) White\n(viii) Tiger (Cat No.C8260) | | 4 | each |
|---|
| 53 | 53 | Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)\nA) Parryware make\na) White\n(viii) Petite (S/P) (Cat No.C0287/88) (inclusive of seat cover) | | 4 | each |
|---|
| 54 | 54 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wall clamps etc.as necessary complete at all levels including below G.L as directed and specified. \na) In exposed surfaces or in trenches. \n(ii) 110mm dia. | | 10 | each |
|---|
| 55 | 55 | Supplying fitting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified.\na) In exposed surfaces or in trenches. \n(ii) 110mm dia. | | 10 | each |
|---|
| 56 | 56 | Supplying fitting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. \na) In exposed surfaces or in trenches. \n(ii) 110mm dia. | | 12 | each |
|---|
| 57 | 57 | Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately)\nAgmeco brand\n(iv) Bib Cock Long Body with Flange CAT No.CC 00203/CAT No.CN 00203 | | 8 | each |
|---|
| 58 | 58 | Supplying and placing cylindrical vertical claused top (PCVC) tank of Syntex/Polycon/Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed.\n500 litre capacity \n(b) Polycon make | | 2 | each |
|---|
| 59 | 59 | Labour for test boring with 40mm (internal) dia. GI pipes including keeping surplus of eartth and every 2m after first 3 m depth and delivering the same in nearest PWD camp in the small tin container (container, scaffolding, tools, etc will have to be arranged by the contractor at his own cost). | | 30.48 | RM |
|---|
| 60 | 60 | Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department.\niv) Bore hole of 150mm diameter | | 30.48 | Rm |
|---|
| 61 | 61 | Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed.\nB) PVC PIPE\nSUPREME / PRINCE / FUSION /SFMC Brand\niv) 50mm diameter | | 20 | RM |
|---|
| 62 | 62 | Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.\nPVC PIPE\nSUPREME /PRINCE / FUSION /SFMC Brand\nvii) 160mm diameter | | 26.48 | RM |
|---|
| 63 | 63 | Supplying fitting and fixing ISI approved PVC filter 3.00 metre long.\nv) 150mm diameter | | 2 | each |
|---|
| 64 | 64 | Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipe\n(A) Exposed or in trenchesc)\n25 mm nominal outer dia pipe | | 10 | rm |
|---|
| 65 | 65 | Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET, Single Phase with steel cable rope and submersible cable complete as directed and specified by the deptt.\nSingle phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 1.5 HP STAGE 5 to 26 with control panel. | | 1 | each |
|---|
| 66 | 66 | ELECTRICAL\nWiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the department) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover ,ceiling rose (Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the department.\nb) medium point for light upto 6.00 metre length | | 38 | per point |
|---|
| 67 | 67 | Wiring for light/ fan/ call bell point with 2x1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the department) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 6 Amp flush type switch/ bell push (Anchor Penta/Gold medal /Kolor kany.Kom/ Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover ,ceiling rose (Anchor/Gold medal /Kolor kany.Kom / Havells or equivalent make as approved by the Deptt.) etc. complete as directed and specified by the department\nb) medium point for fan upto 6.00 metre length | | 24 | per point |
|---|
| 68 | 68 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) with flat 19 mm ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in surface system, including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere.\n Medium point up to 6.00 metre. Length. | | 32 | per point |
|---|
| 69 | 69 | Supplying and fixing of batten holder (Anchor Penta PC CHERRY /Gold medal /Kolor kany.kom/Havells or equivalent make as approved by the Deptt.) including connection as approved by the Deptt.) as required Without Lamp | | 38 | each |
|---|
| 70 | 70 | Supplying and fitting of 18/20 Watt CFL lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt. | | 38 | each |
|---|
| 71 | 71 | Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator].\nPremium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make) | | 24 | each |
|---|
| 72 | 72 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted Single door surface mounting MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt.\nABB, Schneider MG, legrand, Hager make)\n12 way SPN single door | | 1 | each |
|---|
| 73 | 73 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\n6 to 32A | | 12 | each |
|---|
| 74 | 74 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt.\nB Series (Schneider MG, legrand, Hager make)\n40A | | 1 | each |
|---|
| 75 | 75 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured underground cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make).\n3 Core A2XWY A2XFY\n4.00 Sq.mm 3 Core armoured U.G. cable | | 20 | rm |
|---|
