Webel Iiit Kalyani 07 Idm 19 20 108 Combined Work For Civil Modular Electrical Fire Fighting Hvac Within Iiit Kalyani Office At Kalyani Ph 1, Kalyani-West Bengal

TDR : 23629957

Tender Notice
BOQ

Expired

Kalyani , West Bengal

Tender Brief : Webel Iiit Kalyani 07 Idm 19 20 108 Combined Work For Civil Modular Electrical Fire Fighting Hvac Within Iiit Kalyani Office At Kalyani Ph 1

Document Fees
₹ 1000 /-

EMD
₹ 9950.0 /-

Tender Value
₹ 19.84 Lakhs /-

Submission Date
09-03-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Combined work for civil finishing/modular furniture/ electrical finishing /Firefighting finishing within IIIT office at Kalyani Ph-I
1	1	Module 205	Item 01
2	2	Shifting carefully the exsiting wooden furniture in different sized lab table (for reuse) from the classroom and to be stored in a suitable place as per instruction of Site-in-Charge.Carriage lead considered up to 2 km.	Item 02	45	sqm
3	3	Painting & Finishing Work	Item 03
4	4	Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.Water based interior grade Acrylic Primer of two coats	Item 04	100	Sqm
5	5	4 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)	Item 05	100	sqm
6	6	Dismantling carefully vitrified tiles, marble, kota stone, glazed/ceramic tiles, in flooring, steps, risers, dado skirting etc laid in cement mortar including stacking serviceable materials at site as per direction and disposal of unserviceable material from work site including mending good tod amaes to match with adjacent surface complete with all labour & materials at all floors.	Item 06	0.92	Sqm
7	7	Patch repairing to plaster surface with cement mortar (1:4) including providing necessary materials, cleaning surface, necessary scaffolding and curing complete with all labour and materials at any level and floor.	Item 07	10	Sqm
8	8	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm	Item 08
9	9	each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter hannels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,	Item 09
10	10	the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,	Item 10
11	11	including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :	Item 11
12	12	a) 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I	Item 12	2	Sqm
13	13	Providing and fixing suspended ceiling with designer tiles board of 610 mm x 610 mm grid system with 6 mm thick HPSC (High Pressure Steam Cured) non-asbestos fibre cement multipurpose board as per IS 14862. Frame work made of GI 38 x 24 mm main runner, cross tee of 29 x 24 mm and wall angle 24 x 24 mm with perimeter of ceiling screw fixed to brick wall/partition with the help of nylon sleeves and screws at 610 mm centre. The frame suspended from ceiling with 6 mm GI wire hangers fixed with steel dash fasteners with alignment clip. The rate should include for providing additional members of frame work for the portion of light fittings. AC grills and any other openings as required all complete as per drawing and directions with all labour and materials.	Item 13	9	Sqm
14	14	Supplying and fixing in position approved quality vertical blinds made with 100 mm wide approved quality made and shade imported fabrics assembled on top aluminium frame (33 mm x 28 mm x 1.2 mm) with powder coated (approx 50 micron) with high quality nylon runners with auto clutch mechanism, stainless steel master runners, stainless steel fitter chains and PVC end covers.	Item 14
15	15	The bottom end of the fabrics are suspended with a weight which are to be connected by link chains. All complete as per manufacturer's specifications. Rate should include 3\" overlapping of fabrics beyond the window/curtain wall opening all complete as per direction with all labour and materials (Measurement to be made on the opening size) (basic price @ Rs.650.00 - Rs.700.00 per sqm).	Item 15	2	Sqm
16	16	Modular Work	Item 16
17	17	Full Height Partition	Item 17
18	18	Supplying, fabricating and erecting full height (i.e upto soffit of ceiling, beam and A.c bulk head ceiling) partition 65 to 75 mm thick of modular grid system of approved make consisting of C.R.C.A frame work with powder coated (40-50 micron) fitted and fixed in position as per drawing and direction including providing height adjuster below ceiling/floor. Allow for cutting chase to wall and floors and mending good damages. Frame are to be fitted with masonry/RCC surface by means of approved metal (brass) expansion fastener. The rate should include for providing minimum 120-130 mm box type wire management just above/below the table top as wellas at skirting level suitable provision for fixing switch board and socket, outlet as per requirement for powerline & Data/Tele lines along the base and at the table	Item 18
19	19	height as specified. The skirting will be fabricated out of 20 SWG M.S.Sheet.The skirting will be approachable from both sides and will have channels for adjustment for floors. Box type race way can be provided at table height as per requirement. Panels of partitions are to be fitted by using aluminium profiles and PVC extrusions are used as trimmings.	Item 19
20	20	All metal sections, fabricated M.S components and aluminium profiles are finished in 40 to 50 micron epoxy powder coating of approved shade.	Item 20
21	21	The rate should be including for making provision of slots as per site requirement in vertical member for cantilevered accessories like overhead storage, work top etc. All complete as per drawing and directions with all labour and materials. Only few vertical members will go above false ceiling and will be jointed under the main ceiling/beam of bottom.	Item 21
22	22	i) Partition facia fabricated with minimum 8 mm th prelaminated MDF board of approved shade on both sides of the frame work fitted with connectors. All complete as per drawing and directions.	Item 22	114.9	Sqm
23	23	ii) Partitions facia finished with single glass of minimum 5 mm thick toughened glass of approved make fixed to the partition frame fitted with powder coated aluminium extruded section all complete as per drawing & direction.	Item 23	10	Sqm
24	24	Low Height Partition	Item 24
25	25	Supplying, fabricating and erecting low height partition 65 to 75 mm thick of modular grid system of approved make consisting of minimum	Item 25
26	26	1.2 mm thick CRCA frame work with powder coated (40-50 micron) fitted and fixed in position as per drawing and direction including providing height adjuster below ceiling/floor. Allow for cutting chases to wall and floors and mending good damages. Frame are to be fitted with masonry/RCC surface by means of approved metal (brass) expansion fastener. The rate should include for providing minimum 120 - 130 mm wide box type wire management just above/below the table top as well as skirting level for wire management system, to be fabricated with CRCA sheet of minimum 0.8 mm thick finished with powder coated 40 to 50 micron suitable provision for switch board and sockets outlets as per requirements for power line and Data/Tele lines along the base and at the table height as specified.	Item 26
27	27	The skirting will be fabricated out of 20 SWG M S sheet. The skirting will be approachable from both sides and will have channels for adjustment for floors. Panels of partitions are to be fitted by using aluminium profiles and PVC extrusions are used as trimmings.	Item 27
28	28	All metal sections, fabricated MS components and aluminium profiles are finished in 40-50 micron epoxy powder coating of approved make.	Item 28
29	29	The rate should be including provision of slots as per site requirement in vertical member for cantilevered accessories like overhead store, work top etc. All complete as per drawing and directions with all labour and materials.	Item 29
30	30	i) Partition facia fabricated with minimum 8 mm thick prelaminated MDF board of approved shade on both sides of the frame work fitted with connectors. All complete as per drawing and directions.	Item 30	1.5	Sqm
31	31	ii) Partition facia fabricated with minimum 8 mm thick prelaminated MDF board of approved shade on one side of the frame work fitted with connectors. All complete as per drawing and directions.	Item 31	1.2	Sqm
32	32	iii) Partition facia made wilth single glass of minimum 5 mm thick toughened glass of approved make fixed to the partition frame fitted with powder coated aluminium extruded section all complete as per drawing & direction.	Item 32	2	Sqm
33	33	Providing and fixing door shutter / door jamb will be made out of 20 SWG M.S sheet. The shutter are to be finished with minimum 8 mm thick prelaminated MDF board on both sides of the frame work fitted with connector and with a vision panel (150 mm x 450 mm of 5 mm thick glass) All the panels are to be fitted by using aluminium profiles and PVC extrusions are used as trimmings.	Item 33
34	34	All MS components and aluminium profile are finished by 40-50 microns epoxy powder coating.	Item 34
35	35	i) The shutter will be fixed on Pivot hinges duly powder coated and will have door closures, handles and locking arrangement all inclusive of approved quality as per drawing & direction of Engineer-in-Charge or similar to existing shutter.	Item 35	12	Sqm
36	36	Work Station	Item 36
37	37	Supplying and fixing of approved make minimum 25 mm thick work top with minimum 0.7 mm thick high pressed post form laminate of approved shade and quality top, bottom and sides. All the edges will be chamfered and finished with PVC lipping of 1.2 / 2.0 mm thickness. The frame will have the necessary provisions for suspending drawer units and fixing of sides or 25 mm thick post form laminated board without frame work. The workstation should be fitted with cantilevered brackets to tables and attached to the partition frame work.	Item 37
38	38	The keyboard trays shall be minimum 500 wide of 18 gauge mild steel body with anti rust treatment. This shall be finished in 50 micron powder coated in epoxy paint. The key board trays shall be fixed below table top with necessary hardware for easy sliding. The CPU trolley of size 240 x 240 x 245 mm having adjustable width and lockable castors made of 18 gauge thick steel sheet with powder coating of 50 micron. Modesty panels, board side gable end wherever necessary will be fabricated out of minimum 18 mm thick prelaminated MDF board.	Item 38
39	39	All board components tops, sides etc are finished with laminate and all the edges chamfered at 45 degree. The rate should include necessary approved hardware fittings for fixing the table top, modesty panels, side board etc including making	Item 39
40	40	hole on the table top for connecting the wires, the hole to be covered with dark coloured PVC insert (wire manager) with movable part to put wires and socket and neatly cover the hole. All complete as per drawing and direction with all labour and materials.	Item 40
41	41	Main work top 1250 x 1205 x 600 x 475 mm. All complete as per drawing.	Item 41	1	Nos
42	42	Main worktop 1500 mm x 750 mm and return work top 650 mm x 450 mm all complete as per drawing.	Item 42	6	Nos
43	43	Supplying, making and fixing wall mounted suspended filing cabinet 400 mm deep and 450 mm high with openable shutters. The cabinet top, bottom, shelf and sides made of 18 mm thick PF bonded MDF board of approved make and shutters made of 12 mm thick phenol formaldehyde bonded MDF board and 8 mm thick prelaminated MDF board of approved make at back.	Item 43
44	44	i) Fixing of the cabinet would be done by powder coated M.S cleat with necessary accessories.	Item 44
45	45	The rate should include necessary approved quality hardware fittings required for the purpose like suspending clip, bracket, cabinet lock, handle, stainless steel tower bolt, stainless steel hinges, ball catchers etc. The item is to be completed in all respects as per drawing and direction with all labour and materials to the satisfaction of Engineer-in-Charge.	Item 45	15	Mtrs
46	46	Floor Cabinet	Item 46
47	47	Supplying credenza unit of approved make top 25 mmbottom and side made of minimum 18 mm thick phenol formaldehyde bonded post form laminated MDF board of approved shade and quality and the shutter of 12 mm thick preliminated MDF board of approved shade & quality and back with 8 mm thick prelaminated MDF board of approved shade and quality.	Item 47
48	48	All metal components should be finished with black epoxy powder coating of 40-50 micron (approx). Rate should include necessary approved hardware fittings of approved quality complete as per drawing and direction with all labour and materials.	Item 48
49	49	375/450 mm wide 1200 mm high with 2 Nos adjustable shelf.	Item 49	12.6	Mtrs
50	50	Supplying mobile drawer unit of approved make, the facia, made of minimum 18 mm thick MDF Board with minimum 0.7 mm thick post form lamination of approved shade and quality. The top and sides made of minimum 18 mm thick PF bonded MDF board and the back will be made of minimum 8 mm thick PF bonded MDF board of approved shade and quality.	Item 50
51	51	The drawers are fabricated out of MS sheets and assembled with drawer, runners for smooth operation. A single central locking system of approved quality to be provided. All metal components will be finished in black epoxy powder coating of 40-50 micron (approx). Rate should be including necessary approved quality hardware fittings. All complete as per drawing and direction with all labour and materials.	Item 51
52	52	Size of storage unit 450/470 mm x 495/550 mm x 610/667 mm.	Item 52	6	Nos
53	53	Module 206	Item 53
54	54	Shifting carefully the exsiting wooden furniture in different sized lab table (for reuse) from the classroom and to be stored in a suitable place as per instruction of Site-in-Charge.Carriage lead to be considered up to 2 km.	Item 54	15	sqm
55	55	Painting & Finishing Work	Item 55
56	56	Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.Water based interior grade Acrylic Primer of two coats	Item 56	50	Sqm
57	57	4 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :\n(Two coats)	Item 57	50	sqm
58	58	Dismantling carefully vitrified tiles, marble, kota stone, glazed/ceramic tiles, in flooring, steps, risers, dado skirting etc laid in cement mortar including stacking serviceable materials at site as per direction and disposal of unserviceable material from work site including mending good tod amaes to match with adjacent surface complete with all labour & materials at all floors.	Item 58	1.501	Sqm
59	59	Patch repairing to plaster surface with cement mortar (1:4) including providing necessary materials, cleaning surface, necessary scaffolding and curing complete with all labour and materials at any level and floor.	Item 59	10	Sqm
60	60	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm	Item 60
61	61	each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter hannels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,	Item 61
62	62	the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,	Item 62
63	63	including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :	Item 63
64	64	a) 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I	Item 64	2	Sqm
65	65	Providing and fixing suspended ceiling with designer tiles board of 610 mm x 610 mm grid system with 6 mm thick HPSC (High Pressure Steam Cured) non-asbestos fibre cement multipurpose board as per IS 14862. Frame work made of GI 38 x 24 mm main runner, cross tee of 29 x 24 mm and wall angle 24 x 24 mm with perimeter of ceiling screw fixed to brick wall/partition with the help of nylon sleeves and screws at 610 mm centre. The frame suspended from ceiling with 6 mm GI wire hangers fixed with steel dash fasteners with alignment clip. The rate should include for providing additional members of frame work for the portion of light fittings. AC grills and any other openings as required all complete as per drawing and directions with all labour and materials.	Item 65	4	Sqm
66	66	Supplying and fixing in position approved quality vertical blinds made with 100 mm wide approved quality made and shade imported fabrics assembled on top aluminium frame (33 mm x 28 mm x 1.2 mm) with powder coated (approx 50 micron) with high quality nylon runners with auto clutch mechanism, stainless steel master runners, stainless steel fitter chains and PVC end covers.	Item 66
67	67	The bottom end of the fabrics are suspended with a weight which are to be connected by link chains. All complete as per manufacturer's specifications. Rate should include 3\" overlapping of fabrics beyond the window/curtain wall opening all complete as per direction with all labour and materials (Measurement to be made on the opening size) (basic price @ Rs.650.00 - Rs.700.00 per sqm).	Item 67	2	Sqm
68	68	Modular Work	Item 68
69	69	Full Height Partition	Item 69
70	70	Supplying, fabricating and erecting full height (i.e upto soffit of ceiling, beam and A.c bulk head ceiling) partition 65 to 75 mm thick of modular grid system of approved make consisting of C.R.C.A frame work with powder coated (40-50 micron) fitted and fixed in position as per drawing and direction including providing height adjuster below ceiling/floor. Allow for cutting chase to wall and floors and mending good damages. Frame are to be fitted with masonry/RCC surface by means of approved metal (brass) expansion fastener. The rate should include for providing minimum 120-130 mm box type wire management just above/below the table top as wellas at skirting level suitable provision for fixing switch board and socket, outlet as per requirement for powerline & Data/Tele lines along the base and at the table	Item 70
71	71	height as specified. The skirting will be fabricated out of 20 SWG M.S.Sheet.The skirting will be approachable from both sides and will have channels for adjustment for floors. Box type race way can be provided at table height as per requirement. Panels of partitions are to be fitted by using aluminium profiles and PVC extrusions are used as trimmings.	Item 71
72	72	All metal sections, fabricated M.S components and aluminium profiles are finished in 40 to 50 micron epoxy powder coating of approved shade.	Item 72
73	73	The rate should be including for making provision of slots as per site requirement in vertical member for cantilevered accessories like overhead storage, work top etc. All complete as per drawing and directions with all labour and materials. Only few vertical members will go above false ceiling and will be jointed under the main ceiling/beam of bottom.	Item 73
74	74	i) Partition facia fabricated with minimum 8 mm th prelaminated MDF board of approved shade on both sides of the frame work fitted with connectors. All complete as per drawing and directions.	Item 74	17	Sqm
75	75	ii) Partitions facia finished with single glass of minimum 5 mm thick toughened glass of approved make fixed to the partition frame fitted with powder coated aluminium extruded section all complete as per drawing & direction.	Item 75	2	Sqm
76	76	Providing and fixing door shutter / door jamb will be made out of 20 SWG M.S sheet. The shutter are to be finished with minimum 8 mm thick prelaminated MDF board on both sides of the frame work fitted with connector and with a vision panel (150 mm x 450 mm of 5 mm thick glass) All the panels are to be fitted by using aluminium profiles and PVC extrusions are used as trimmings.	Item 76
77	77	All MS components and aluminium profile are finished by 40-50 microns epoxy powder coating.	Item 77
78	78	i) The shutter will be fixed on Pivot hinges duly powder coated and will have door closures, handles and locking arrangement all inclusive of approved quality as per drawing & direction of Engineer-in-Charge or similar to existing shutter.	Item 78	2	Sqm
79	79	Chairs	Item 79
80	80	Mid back Chairs for Faculties --Providing and placing at site ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA Certified chair model Bravo mid Back or simillar .The seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 47.5 cm(W) x 58.0 cm(H) and of seat shall be 47.0 cm (W) x 48.0 cm (D). The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as. per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. The mechanism shall be designed with 360° revolving type, Upright-position locking, Tilt tension adjustment, Seat/back tilting ratio of 1:3. Supply & placement of Reading chair model CH 1018 from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA & GREENGUARD Certified ManufacturersThe seat and back shall be made from 1.0±0.1cm. thk. hot pressed moisture resistant, commercial plywood measured as per QA method described in OCP QLTA-P14-18 and shall be upholstered with P.U. foam and fabric. The dimensions of Back shall be 42.0cm. (W) X 26.5cm. (H) and of seat shall be 42.0cm (W) X 42.0cm (D). The HR Polyurethane foam shall be moulded with density =45+/-2 .kg/m3 and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.	Item 80	6	Nos
81	81	Providing and placing at site ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA Certified Chair of make Godrej(Model 7046R) 1. Seat/Back Assembly : The seat and back are made from 1.2 ±0.1cm.. Thk. Hot pressed plywood and upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort .Seat Size: 45.0cm(W) x 42.0cm. (D)Back Size: 40.0cm(W) x 47.0cm.(H)2. Seat / Back Covers: The seat and back covers are injection moulded in black Co-polymer Polypropylene.3. High Resilience (HR) Polyurethane Foam : The HR polyurethane foam is moulded with density = 45 +/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.4. Armrest Assembly (For 7046R): The one-piece armrest are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 cm. thk. HR steel.	Item 81	12	nos
82	82	ELECTRICAL WORK	Item 82
83	83	Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FRLS' – in PVC Rigid/Flexible Conduit 'FRLS' (ISI Marked) on wall/ceiling/Furniture as per site requirement (concealed / surface)	Item 83
84	84	Supplying & drawing of wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire in 20mm size PVC rigid/flexible conduit (as per direction by EIC) 'FRLS' including necessary Fittings and necesaary connections as required	Item 84
85	85	2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.	Item 85	1100	METER
86	86	Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FRLS' – in PVC Casing-Capping on wall/ceiling/Furniture as per site requirement	Item 86
87	87	Supplying & drawing of Wiring in 1.1 KV grade single core stranded 'FRLS' PVC insulated & unsheathed copper wire of following sizes in 25mm PVC casing-capping (as per direction by EIC) including necessary PVC clips, fittings, necessary connections as required	Item 87
88	88	2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.	Item 88	200	METER
89	89	Point Wiring	Item 89
90	90	Supplying and carrying wiring for light, fan and dependent socket points by using 16 SWG MS/PVC conduits with threaded joints of required dia as per IS 732, MS/PVC conduit accessories, MS/PVC flexible conduit with couplers for drops with accessories, 2 x 1.5 + 1 x 1.5 sq mm, 1100V grade FRLS PVC insulated copper wires approved 6A modular type switches and sockets with plates and all accessories for fixing in modular furniture, GI/PVC boxes and other point wiring accessories and carrying out surface/concealed conduit system of wiring as per requirement with all wiring materials. Conduits shall run on surface of the ceiling above false ceiling and concealed in wall by cutting chase in wall and mending good of all the damages. All points shall be earthed with 1.5 sq mm FRLS flexible copper wire. Wires shall be terminated at light fixtures with ferrules, 16A, 4 way connector, wire ends shall not be kept loose/bare. The rate shall also include all accessories of MS/PVC conduits, etc, necessary civil works for embedding conduits and boxes below false ceiling, wherever applicable.	Item 90
91	91	1 light point controlled by 1 no. 6A switch	Item 91	13	NOS
92	92	2 light points controlled by 1 no. 6A switch	Item 92	2	NOS
93	93	Switches & Sockets	Item 93
94	94	Supply, fixing, testing & commissioning of the following components like approved plate type modular switches, socket etc. duly wired.	Item 94
95	95	1 No. - 6/16A, 6 pin in universal socket controlled by 16A, SP switch, RP in workstations and in cabins, without MS/PVC Box.	Item 95	10	NOS
96	96	Same as above but with MS/PVC Box	Item 96	6	NOS
97	97	3 NOS - 6A, 3 pin universal socket controlled by common 16A, SP switch, without MS/PVC Box	Item 97	10	NOS
98	98	Same as above but with MS/PVC Box	Item 98	6	NOS
99	99	1 No. - 6A, 3 pin in universal socket controlled by 6A, SP switch, for Wi-fi with MS/PVC Box.	Item 99	1	NOS
100	100	AC Sockets	Item 100
101	101	Supply and flush fixing of modular type heavy duty plug socket unit comprising of 25/32A socket and plug top (with indicator) and solid state type starter units of electronic type with highflow voltage protections, O/L protect etc and suitable for 1.0/1.5/2.0 TR AC Units modular type and completely wired including cutting chases and mending good damages, painting, earthing, necessary connections complete, as per required for AC Units.	Item 101	3	NOS
102	102	Empty Conduits	Item 102
103	103	Supply and fixing of FRLS PVC (ISI marked) conduit (rigid/flexible) of various dia, exposed or concealed with all accessories like tees, bends, glands etc. JBs (PVC) as required and fish wire etc for wiring purpose complete and mending good damages to building works.	Item 103
104	104	20 mm dia (2 mm thick)	Item 104	50	METER
105	105	25 mm dia (2 mm thick)	Item 105	50	METER
106	106	Supplying and fixing PVC casing-capping on wall or ceiling, including elobw, necessary PVC fittings etc. amd mending good damages to building works	Item 106
107	107	25x10 mm Size	Item 107	20	METER
108	108	LIGHT & FAN FIXTURE WORK	Item 108
109	109	INDOOR TYPE LUMINAIRE	Item 109
110	110	Supply, installation, testing and commissioning of light fixture complete with all accessories, as required. Erection rate shall include necessary GI chain and supporting suspending hardware for fixing the light fittings.	Item 110
111	111	Recessed mounted circular down lighter (Philips Cat No. DN195B LED 20S - 6500 PSU WH S1) or approved equivalent.	Item 111	6	NOS
112	112	Dismantling of existing light fittings, conduits, switchboards, wiring, switch-sockets etc. and storing the same as per direction by EIC.	Item 112	1	LOT
113	113	HVAC	Item 113
114	114	Dismantling, shifting & refixing of existing branch duct along with duct hanging arrangement as per direction of EIC and blank off the existing branch duct cut off area by 24 G SAIL / TATA ducting sheet along with 12 mm thick FGP accoustic insulation by screw up 36 G Alluminium perforated sheet.	Item 114	2	No.
115	115	Dismantling, shifting & refixing of existing branch duct along with duct hanging arrangement as per direction of EIC and blank off the existing branch duct cut off area by 24 G SAIL / TATA ducting sheet along with 25 mm thick fibre glass thermel insulation.	Item 115	4	No.
116	116	AC Commissioning of the Module No. 205 by taking temperature both dry bulb and wet bulb by cyclo meter, air balancing on running condition by Animometer on presense of EIC.	Item 116	1	LS
117	117	SITC of 24 G sheet metal work (SAIL / TATA) along with 25 mm fibre glass thermal insulation complete.	Item 117	2	Sqm.
118	118	Active Device	Item 118
119	119	L2 Switch - 8 Port	Item 119	1	Nos
120	120	L2 Switch Warranty - 3 Years	Item 120	1	Nos
121	121	Passive Components	Item 121
122	122	CAT6 UTP Cable	Item 122	1	Box
123	123	I/O	Item 123	6	Nos
124	124	Patch Cord - 2 Meter	Item 124	6	Nos
125	125	Patch Cord - 1 Meter	Item 125	6	Nos
126	126	UTP Jack	Item 126	6	Nos
127	127	Face Plate	Item 127	6	Nos
128	128	Back Box	Item 128	6	Box
129	129	9U Network Rack	Item 129	1	No
130	130	1\" PVC conduit	Item 130	100	Mtrs.
131	131	Installation & Configuration	Item 131
132	132	Laying of UTP Cable through Conduit	Item 132	100	Mtrs
133	133	Termination at the User End	Item 133	6	Nos
134	134	Termination at the patch Panel	Item 134	6	Nos
135	135	Installation of Rack	Item 135	1	No
136	136	Installation and configuration of switch, Controller and Access Point	Item 136	1	Nos
137	137	Project Management charges including rack dressing, numbering, documentation, shifting of existing rack etc.	Item 137	1	LS

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

West Bengal Tenders

Safety and Security Equipment Tenders

Fire Fighting Equipments Tenders

Fire Fighting Consumable Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Webel Iiit Kalyani 07 Idm 19 20 108 Combined Work For Civil Modular Electrical Fire Fighting Hvac Within Iiit Kalyani Office At Kalyani Ph 1, Kalyani-West Bengal

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Webel Iiit Kalyani 07 Idm 19 20 108 Combined Work For Civil Modular Electrical Fire Fighting Hvac Within Iiit Kalyani Office At Kalyani Ph 1, Kalyani-West Bengal

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us