| 1 | Construction of Project Office and vehicle shed | 78.0 | 132.00 | Tonne | 186.46 | 24612.72 |
| Conveyance charges of Cement including loading & unloading charges - Up to 3 KM. |
| 2 | Construction of Project Office and vehicle shed | 77.0 | 17.50 | Tonne | 216.22 | 3783.85 |
| Conveyance charges of Steel including loading & unloading charges - Up to 3 KM. |
| 3 | Construction of Project Office and vehicle shed | 76.0 | 7.00 | Each | 319.00 | 2233.00 |
| Supplying and fixing CI Nahany traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for nominal dia 75mm(3 Inches) and grating size 100mm dia of weight not less than 4.0Kgs |
| 4 | Construction of Project Office and vehicle shed | 75.0 | 20.00 | Each | 101.40 | 2028.00 |
| Supplying & Fixing 15mm PVC connection with brass union nut C.P coated |
| 5 | Construction of Project Office and vehicle shed | 74.0 | 6.00 | Each | 71.70 | 430.20 |
| Supplying and fixing 609.6mm long 127mm wide plate glass shelf |
| 6 | Construction of Project Office and vehicle shed | 73.0 | 6.00 | Each | 548.70 | 3292.20 |
| Supplying and fixing TV shape mirror with plastic frame size 609.6x457.2mm |
| 7 | Construction of Project Office and vehicle shed | 72.0 | 5.00 | Each | 163.50 | 817.50 |
| Supplying and fixing 19.04mm dia and 609.6mm long aluminium anodized towel rod with brackets and aluminium screws |
| 8 | Construction of Project Office and vehicle shed | 71.0 | 5.00 | Each | 1613.20 | 8066.00 |
| Supplying & Fixing Indian make Flat Back Wash Hand Basin (Hindware/ Parry ware/ Neycer) 1st quality conforming to IS:2556 - Part-4:1972 with 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400grams Seiko/Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550x400mm - Single C.P. Pillar Cock |
| 9 | Construction of Project Office and vehicle shed | 70.0 | 3.00 | Each | 2310.40 | 6931.20 |
| Supplying and fixing white glazed flat back half stall urinals first quality conforming to IS 2556-1995 with standard C.P spreader of over all size 95x95x57mm conforming to Is-2556 part-6 sec 6/1974 fixing with screws complete Indian make (Hindware/ parry ware/ Neycer) of size 410x265x305mm |
| 10 | Construction of Project Office and vehicle shed | 69.0 | 3.00 | Each | 4160.50 | 12481.50 |
| Supply and fixing Indian make white glazed vitreous china porcelain sink conforming to IS 2556-Part-5-1994 on cantilever brackets with parallel pipe thread conforming to IS 2963-1979, of size 600x400x250mm |
| 11 | Construction of Project Office and vehicle shed | 68.0 | 6.00 | Each | 1487.10 | 8922.60 |
| Supply and fixing of PVC low level Cistern Parryware/ Slimline with internal components and short bend.- 10 Ltrs capacity Single flush |
| 12 | Construction of Project Office and vehicle shed | 67.0 | 5.00 | Each | 1703.90 | 8519.50 |
| Supplying and fixing European water closet of first quality conforming to IS 2556-Part-2-2004 of Hindware/ Neycer or parryware make white glazed with S trap. Plastic seat and lid is to be paid extra. |
| 13 | Construction of Project Office and vehicle shed | 66.0 | 1.00 | Each | 1454.50 | 1454.50 |
| Supplying and fixing 580 x 440mm Orissa pan white glazed W.C first quality ISI marked conforming to IS 2556 - part 3- 2004 with P or S trap Hindware/ parry ware/ Neycer. |
| 14 | Construction of Project Office and vehicle shed | 65.0 | 9.00 | Each | 410.20 | 3691.80 |
| Supplying and fixing 150mm x100mm SWG gully traps Conforming to IS- 651 and 4127 with C.I Grating and Constg. Brick masonry in CM 1:6 prop. including plastering and fitted with 304.8mm x288.6mm(12 Inchesx9 Inches) C.I Frame and hinged cover including earth work excavation (excluding cost of Cement) |
| 15 | Construction of Project Office and vehicle shed | 64.0 | 30.00 | Each | 72.80 | 2184.00 |
| Supplying and fixing G.I union 25mm Ist Quality |
| 16 | Construction of Project Office and vehicle shed | 63.0 | 8.00 | Each | 296.50 | 2372.00 |
| Supply & Fixing 12.7mm N.P bib tap Indian make 300 grams Seiko/ Senior/ Nice or equivalent |
| 17 | Construction of Project Office and vehicle shed | 62.0 | 20.00 | Each | 248.50 | 4970.00 |
| Supply and fixing 12.7 mm brass stop cock Indian make 300 grams |
| 18 | Construction of Project Office and vehicle shed | 61.0 | 150.00 | RM | 163.90 | 24585.00 |
| Supply and Fixing of Supreme/ Ashirvad/ Astral/ Prince / Kisan or equivalent premium make CPVC Pipes along with Fittings to meet the requirement of ASTM-D 2846 etc., complete - for 15.90mm OD Pipe - SDR 11 |
| 19 | Construction of Project Office and vehicle shed | 60.0 | 100.00 | RM | 195.70 | 19570.00 |
| Supply and Fixing of Supreme/ Ashirvad/ Astral/ Prince / Kisan or equivalent premium make CPVC Pipes along with Fittings to meet the requirement of ASTM-D 2846 etc., complete - for 22.20mm OD Pipe - SDR 11 |
| 20 | Construction of Project Office and vehicle shed | 59.0 | 50.00 | RM | 232.10 | 11605.00 |
| Supply and Fixing of Supreme/ Ashirvad/ Astral/ Prince / Kisan or equivalent premium make CPVC Pipes along with Fittings to meet the requirement of ASTM-D 2846 etc., complete - for 28.60mm OD Pipe - SDR 11 |
| 21 | Construction of Project Office and vehicle shed | 58.0 | 10.00 | Each | 119.90 | 1199.00 |
| Supply of Prince/Sudhakar/ Kisan/ Supreme or any ISI Brand UPVC / SWR Traps ( as per ISI- standards ) - Single Y - 110mm dia |
| 22 | Construction of Project Office and vehicle shed | 57.0 | 10.00 | Each | 717.30 | 7173.00 |
| Supplying, laying, fixing and commissioning the SWR pipes of Prince/Sudhakar/ Kisan/ Supreme or any ISI Brand SWR Pipe (as per ISI- standards) Type-A pipes (PVC / SWR pipe - 4Kg/sq.cm) for rain water and vent pipes including couplers/ bends/ tees etc of any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice excluding cost of fittings. - 110mm dia 3M Single socket pipe |
| 23 | Construction of Project Office and vehicle shed | 56.0 | 5.00 | Each | 2246.95 | 11234.75 |
| Construction of 450mm x 450mm and 450mm depth Inspection Chamber with CC 1:4:8 base of 150mm thick 40 mm Crushed Granite metaland 225 mm thick Brick masonary walls in CM 1:6 with fly ash bricks of size 225 x 100 x 60mm with 50kg/Sq. Cm Compressive strength and plastering with CM 1:4; 12mm thick including rendering the surfaces smooth both inside and outside and channelling to required slope including supply and fixing precast RCC 1:2:4 cover of 50mm thick and 600 X 600mm size with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal, including earthwork excavation to the required depth etc; complete for finished item of work (but excluding cost of cement steel and its fabrication charges.) |
| 24 | Construction of Project Office and vehicle shed | 55.0 | 10.00 | Each | 484.96 | 4849.60 |
| Extra depth of 900mm dia circular manhole beyond 450mm depth (Excluding cost of cement) Extra for every 0.100m (100mm) depth |
| 25 | Construction of Project Office and vehicle shed | 54.0 | 5.00 | Each | 3391.94 | 16959.70 |
| Construction of 900mm dia and 450mm depth circular manhole with CC 1:4:8 base of 150mm thick with 40 mm Crushed Granite metal, 225mm thick Brick masonry walls in C.M 1:6 with Flyash bricks of size 225X100x60mm and having compressive stength of 50 kg/sqcm, plastering with CM 1:4,12mm thick including rendering the surfaces smooth both inside and outside and benching with 100mm thick CC 1:2:4 with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal and channelling to required slope including supply and fixing precast RCC 1:2:4 cover of 50mm thick and 600mm dia using 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal, including earth work excavation to the required depth etc. complete for finished item of work (but excluding cost of cement, steel and its fabrication charges.) |
| 26 | Construction of Project Office and vehicle shed | 53.0 | 4000.00 | litre | 5.90 | 23600.00 |
| Supplying and Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer Approved Make and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks |
| 27 | Construction of Project Office and vehicle shed | 52.0 | 190.00 | Sqm | 552.70 | 105013.00 |
| Roofing/side sheeting with Pre-Painted Galvalume sheets of thickness 0.50mm PPGL AZ150, 550 MPA YS fixed with Suitable bolts, nuts, & washers, including fixing of wind ties as per the requirement etc., & including cost and conveyance of all materials etc., complete (with / without Ridges/ valley gutters) for finished Item of work as directed. (cost of wind ties and its fabrication charges are not included) |
| 28 | Construction of Project Office and vehicle shed | 51.0 | 0.50 | tonne | 14770.00 | 7385.00 |
| Erecting companys steel purlins, louvers, sag rods, rafters etc., with contractors tackle, derric, crane etc., complete |
| 29 | Construction of Project Office and vehicle shed | 50.0 | 0.50 | tonne | 17042.30 | 8521.15 |
| Fabrication of structural steel components like purlins, louvers, sag rods, rafters etc., including all leads and lifts at site etc., with companys steel sections but with contractors welding rods, bolts, rivets and all contingencies, power charges, etc., complete as per drawings and insructions of the Engineer in charge. |
| 30 | Construction of Project Office and vehicle shed | 49.0 | 2700.00 | Kg | 85.60 | 231120.00 |
| Supply, Fabrication and Erection of Mild steel tubes for structural steel components like roof trusses, purlins, louvers, sag rods, rafters etc., including cost and conveyance of all materials to site, labour charges, all operational charges and including all materials like MS tubes and Pipes, welding rods, bolts, rivets and all contingencies, power charges, tackle, derric, crane etc., leads and lifts at site etc., complete as per drawings and insructions of the Engineer in charge. |
| 31 | Construction of Project Office and vehicle shed | 48.0 | 0.10 | Kg | 4.50 | 0.45 |
| Erection of compound wall gates, MS fencing posts on ground or on top of compound wall, cattle trap , MS holding down bolts, templates, in position etc., complete |
| 32 | Construction of Project Office and vehicle shed | 47.0 | 0.10 | Tonne | 17042.30 | 1704.23 |
| Fabrication of steel works like compound wall gates, MS fencing posts on ground or on top of compound wall, cattle trap , MS holding down bolts, templates, in position etc., complete including cost of welding rods, power charges etc., complete. |
| 33 | Construction of Project Office and vehicle shed | 46.0 | 0.30 | MT | 43741.80 | 13122.54 |
| Supply of Mild steel / Structural Steel Angles/Channels /Beams/ Square Bars etc., for the month of December - 2019(Including 13.615% CPOH) NOTE: The rate is for material at site. |
| 34 | Construction of Project Office and vehicle shed | 45.0 | 200.00 | Kg | 4.50 | 900.00 |
| Labour Charges for Fixing of window grills, compound wall grills, Iron Doors, windows, Verandah grils, and window guard bars in position etc., complete. |
| 35 | Construction of Project Office and vehicle shed | 44.0 | 200.00 | Kg | 29.50 | 5900.00 |
| Labour Charges for Fabrication of steel works like window grills, compound wall grills, Iron Doors, windows, Verandah grils and window guard bars including cost of welding rods, power charges etc., ( Excluding cost of fixing in position) |
| 36 | Construction of Project Office and vehicle shed | 43.0 | 70.00 | Sqm | 141.40 | 9898.00 |
| Varnishing/French Polishing to wood work, 2 coats complete for finished item of work |
| 37 | Construction of Project Office and vehicle shed | 42.0 | 220.00 | Sqm | 137.00 | 30140.00 |
| Painting with Synthetic enamel paints of grade II paints to new Iron work, two coats including a base coat of Red oxide primer paint grade-1 making three coats in all, complete for finished item of work. |
| 38 | Construction of Project Office and vehicle shed | 41.0 | 260.00 | Sqm | 29.60 | 7696.00 |
| White washing to New walls with Surya Cem / Equivalent Cem two coats complete for finished item of work. |
| 39 | Construction of Project Office and vehicle shed | 40.0 | 850.00 | Sqm | 122.50 | 104125.00 |
| Acrylic exterior emulsion Painting to New walls with Grade-II i.e., Ace or equivalent paint of Approved Make 2 coats over a base coat of Grade -II primer (making 3 coats in all) complete for finished Item of work |
| 40 | Construction of Project Office and vehicle shed | 39.0 | 600.00 | Sqm | 114.70 | 68820.00 |
| Plastic emulsion Painting to New Internal walls with paint of Approved Make with 2 coats over a base coat of Grade -1 primer (making 3 coats in all) complete for finished Item of work |
| 41 | Construction of Project Office and vehicle shed | 38.0 | 600.00 | Sqm | 69.20 | 41520.00 |
| Providing Superior quality wall care putty 2 coats for internal / external walls complete for finished Item of work. |
| 42 | Construction of Project Office and vehicle shed | 37.0 | 36.00 | Sqm | 5353.00 | 192708.00 |
| Supply and fixing of pre-painted steel casement/ openable windows base steel as per IS 513 of - 0.58 mm thick D quality, 1/3rd glazed with 5mm thick plain float glass and 2/3rd with 10mm thick Bison Lam, finish painted with a polyester paint and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50mm, section for shutter of 48 x 25mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills, handle, stay, 2nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square guard bars with 6 Inches (152.4mm) pitch etc., complete without vertical mullion with all MS Powder coated fittings of approved make : Single shutter Window |
| 43 | Construction of Project Office and vehicle shed | 36.0 | 210.00 | Sqm | 1086.60 | 228186.00 |
| Providing and fixing 600mm x600mm, 15mm thick Arm strong false ceiling system manufactured by M/s Arm strong world Industries using hot dipped Galvanised Steel section exposed surface with pre-coated capping, main Tee of size 24x32mm at every 1200mm c/c maximum and rotary stitched cross tee of size 24x27mm at evry 600mm c/c and sub-cross tee of size 24mm x25mm at 1200mm c/c and wall angle of size 19x19mm fixed to periphery of the wall and the above grid is suspended at every 1200mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire laying fine fissured butt edge ceiling tiles of 15mm thick mineral fibre Board for finished size 600x600mm including Cost &conveyance of all materials and labour charges such as cutting, fixing of standing of frame work exposing roof making complete for finished item of work |
| 44 | Construction of Project Office and vehicle shed | 35.0 | 7.50 | Sqm | 3315.90 | 24869.25 |
| Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame made out of 19 gauge M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a coat of primer of approved make. M.S. Frame covered with 5 mm thick heat molded PVC - C channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm wide PVC sheet for top, lock & bottom rail on either side 20mm wide cross PVC sheet as gap insert for top & bottom rail, paneling of 10mm(+/-)( 5mm+5mm) thick PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20 mm width stuck on the interior side of the C channel using solvent cement, and Including the following Aluminium anodized fittings and all taxes complete as per direction of Engineerâ??inâ??charge, manufacturers specification.: Single Shutter as per approved brand a) 1 no. 200mm long aldrop with 16mm dia shoot. b) 2 nos. 200 to 250mm mm long tower bolts with 10mm dia shoot. c) 2 nos. 100 mm to 150 mm long grip handles. d) 3 nos.100 mm long butt hinges. |
| 45 | Construction of Project Office and vehicle shed | 34.0 | 35.00 | RM | 299.10 | 10468.50 |
| Providing and fixing PVC Door Frame of the size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2Nos. of 150mm long brackets of 15x15mm M.S square tube. The two vertical door profiles are to be reinforced with 19x19mm MS Square tube of 19gauge. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners. A minimum of 4Nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-charge for finished item of work including all taxes as per Approved Make |
| 46 | Construction of Project Office and vehicle shed | 33.0 | 25.00 | Sqm | 3156.80 | 78920.00 |
| Supply and fixing Flush door shutters, solid bond wood block board type with teak ply on both faces.: 30 mm thick conforming to IS:2202 as per approved brand, including the following Aluminium anodised fittings : conforming to relevant IS standards of approved make: Single Shutter a) 3 nos. 150mm long butt hinges with screws complete. b) 1 no. tower bolts 200 to 250mm long of 10mm dia rods shoot with screws complete. c) 2 nos. aldrop 300 mm long of 16 mm dia rod. d) 2 nos. grip handles 100 to 150mm long. e) 1no. Foot Door stopper |
| 47 | Construction of Project Office and vehicle shed | 32.0 | 85.00 | RM | 876.90 | 74536.50 |
| Supply and fixing Door frame of 125 x62mm with Medium teak wood including supply and fixing with 6nos. M.S.Z type hold fasts made out of 50x3mm M.S.flat 300mm long in CC beds, etc., complete. (Excluding Cost of Bed Blocks.) |
| 48 | Construction of Project Office and vehicle shed | 31.0 | 90.00 | Sqm | 849.02 | 76411.80 |
| Providing Dadooing to walls with ceramic wall tiles of size 200x300mm / 245mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials, labour charges etc., complete for finished item of work,( But Excluding Cost of Cement ) |
| 49 | Construction of Project Office and vehicle shed | 30.0 | 22.00 | Sqm | 844.92 | 18588.24 |
| Flooring with Non-skid Ceramic floor tiles of size 400 x 400 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:6), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials, labour charges etc., complete for finished item of work, (But Excluding Cost of Cement ) |
| 50 | Construction of Project Office and vehicle shed | 29.0 | 220.00 | Sqm | 863.42 | 189952.40 |
| Flooring with Nano polished /stain free vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:6), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials, labour charges etc., complete for finished item of work, (But Excluding Cost of Cement ) Note :- The same rate is applicable for Skirting / Risers |
| 51 | Construction of Project Office and vehicle shed | 28.0 | 250.00 | Sqm | 248.43 | 62107.50 |
| Flooring 50 mm thick with CC 1:2:4 using 20mm Down size (65% of 20-10mm and 35% of 10 - 4.75mm) graded crushed granite metal of approved hard quality on existing concrete base, rendering smooth complete. (But Excluding Cost of Cement ) |
| 52 | Construction of Project Office and vehicle shed | 27.0 | 80.00 | Sqm | 217.60 | 17408.00 |
| Flooring 40mm thick with CC1:2:4 using 20mm Down size ( 65% of 20-10mm and 35% of 10 - 4.75mm ) graded crushed granite metal of approved hard quality on existing concrete base, rendering smooth complete. ( But Excluding Cost of Cement ) |
| 53 | Construction of Project Office and vehicle shed | 26.0 | 10.00 | Sqm | 274.93 | 2749.30 |
| Providing and fixing of RCC 1:2:4 precast shelves 37mm thick with 6mm dia MS reinforcement at 125mm C/C both ways with 10mm size crushed granite metal of approved hard quality (without brackets) including necessary centering charges and plastering with CM 1:3, 12mm thick etc., (but excluding cost of steel and Cost of Cement) complete as directed. (Cost of Fabrication of Reinforcement included) |
| 54 | Construction of Project Office and vehicle shed | 25.0 | 1.00 | Cum | 4401.86 | 4401.86 |
| Cement Concrete 1:2:4 with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal of approved hard quality inclusive of shuttering/centering charges for bed blocks, encasing joists/ rails, holdfasts of doors and windows, etc. Complete (But Excluding Cost of Cement) - with concrete mixer (CA : 0.90 Cum, FA:0.45Cum) |
| 55 | Construction of Project Office and vehicle shed | 24.0 | 60.00 | Sqm | 110.62 | 6637.20 |
| Plastering to brick masonry with cement mortar 1:6, 12mm thick including raking out of joints ( But Excluding Cost of Cement ) |
| 56 | Construction of Project Office and vehicle shed | 23.0 | 475.00 | Sqm | 218.16 | 103626.00 |
| Brushing of existing concrete surface with wire brush and providing cement concrete 1:2:4 screed of an average thickness of 20mm using 6mm size crushed granite metal of approved hard quality, and providing 2 layers of 24 guage rabbit wire mesh in the CC screed as nominal reinforcement and plastering with CM 1:4, 12mm thick including admixing of approved impervious water proofing compound as per manufacturers specification or @ 2% by weight of cement and finishing smooth and including providing slopes to drain off water etc., complete as directed ( But Excluding Cost of Cement ) |
| 57 | Construction of Project Office and vehicle shed | 22.0 | 120.00 | Sqm | 110.62 | 13274.40 |
| Plastering to brick masonry with cement mortar 1:4, 12mm thick including raking out of joints ( But Excluding Cost of Cement ) |
| 58 | Construction of Project Office and vehicle shed | 21.0 | 7.00 | Sqm | 441.73 | 3092.11 |
| 20 mm thick plain cement mortar bands in cement mortar 1:4 up to 300 mm in width for elevations and drip moulds etc.,- Raised Band ( But Excluding Cost of Cement ) |
| 59 | Construction of Project Office and vehicle shed | 20.0 | 90.00 | RM | 24.04 | 2163.60 |
| Providing gultha in CM 1:6 ,20 mm thick in two coats ,150 mm wide including necessary scraping of wall and finishing the surface as directed ( But Excluding Cost of Cement ) |
| 60 | Construction of Project Office and vehicle shed | 19.0 | 850.00 | Sqm | 227.31 | 193213.50 |
| Plastering 20mm thick Two Coats with Base Coat of 16mm thick in cement mortar 1:6; and top coat of 4 mm thick in CM 1:4 with Sponge finishing etc., ( But Excluding Cost of Cement ) Complete for walls only |
| 61 | Construction of Project Office and vehicle shed | 18.0 | 600.00 | Sqm | 224.25 | 134550.00 |
| Plastering 15 mm thick Two Coats with Base Coat of 11mm thick in cement mortar 1:6; and top coat of 4mm thick in CM 1:4 with sponge finishing etc., ( But Excluding Cost of Cement ) Complete for walls only |
| 62 | Construction of Project Office and vehicle shed | 17.0 | 60.00 | Sqm | 623.51 | 37410.60 |
| Reinforced Flyash Brick masonry with bricks of size 225x100 x60 mm with 50kg /cm2 Compressive strength in C.M.1:4 and using two mild steel bars of 6mm dia in every third layer of brick masonry, with free joints in to the main block work for superstructure including scaffolding, and fabrication charges of steel etc., (But Excluding Cost of Cement and cost of steel ) complete. For 100mm walls |
| 63 | Construction of Project Office and vehicle shed | 16.0 | 124.00 | Cum | 4594.53 | 569721.72 |
| Flyash Brick masonry with solid blocks of size 290x225x140mm with 50kg/cm2 Compressive strength in C.M.1:6 for superstructure including scaffolding etc., (But Excluding Cost of Cement ) complete. |
| 64 | Construction of Project Office and vehicle shed | 15.0 | 17.40 | Tonne | 10703.80 | 186246.12 |
| Labour charges for cutting, bending and binding reinforcement with contractors binding wire, and placing in position as directed by Engineer - in - charge including all leads, etc., complete |
| 65 | Construction of Project Office and vehicle shed | 14.0 | 52.00 | Cum | 6305.86 | 327904.72 |
| Reinforced Cement Concrete M-20 design mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal from approved quarry including cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing and vibrating with mechanical vibrators, finishing, and centering/ shuttering charges, etc, (but excluding cost of steel reinforcement and its fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for roof Slabs. Cement @ 350Kg/Cum of concrete is to be used. |
| 66 | Construction of Project Office and vehicle shed | 13.0 | 18.00 | Cum | 7241.86 | 130353.48 |
| Reinforced Cement Concrete M-20 design mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal from approved quarry including cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing and vibrating with mechanical vibrators, finishing, and centering/ shuttering charges, etc, (but excluding cost of steel reinforcement and its fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for roof Beams. Cement @ 350Kg/Cum of concrete is to be used. |
| 67 | Construction of Project Office and vehicle shed | 12.0 | 5.00 | Cum | 10789.46 | 53947.30 |
| Reinforced Cement Concrete M-20 design mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal from approved quarry including cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing and vibrating with mechanical vibrators, finishing, and centering/ shuttering charges, etc, (but excluding cost of steel reinforcement and its fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for Sunshades. Cement @ 350Kg/Cum of concrete is to be used. |
| 68 | Construction of Project Office and vehicle shed | 11.0 | 5.00 | Cum | 7764.06 | 38820.30 |
| Reinforced Cement Concrete M-20 design mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal from approved quarry including cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing and vibrating with mechanical vibrators, finishing, and centering/ shuttering charges, etc, (but excluding cost of steel reinforcement and its fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for Lintels. Cement @ 350Kg/Cum of concrete is to be used. |
| 69 | Construction of Project Office and vehicle shed | 10.0 | 4.50 | Cum | 6057.26 | 27257.67 |
| Reinforced Cement Concrete M-20 design mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal from approved quarry including cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing and vibrating with mechanical vibrators, finishing, and centering/ shuttering charges, etc, (but excluding cost of steel reinforcement and its fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for Pedestals. Cement @ 350Kg/Cum of concrete is to be used. (Effective length of which does not exceed 3 times the least lateral dimension). |
| 70 | Construction of Project Office and vehicle shed | 9.0 | 18.00 | Cum | 7810.56 | 140590.08 |
| Reinforced Cement Concrete M-20 design mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal from approved quarry including cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing and vibrating with mechanical vibrators, finishing, and centering/ shuttering charges, etc, (but excluding cost of steel reinforcement and its fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for Plinth Beams / Brace beams. Cement @ 350Kg/Cum of concrete is to be used. |
| 71 | Construction of Project Office and vehicle shed | 8.0 | 24.00 | Cum | 7679.16 | 184299.84 |
| Reinforced Cement Concrete M-20 design mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal from approved quarry including cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing and vibrating with mechanical vibrators, finishing, and centering/ shuttering charges, etc, (but excluding cost of steel reinforcement and its fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for Columns. Cement @ 350Kg/Cum of concrete is to be used. |
| 72 | Construction of Project Office and vehicle shed | 7.0 | 61.50 | Cum | 5587.36 | 343622.64 |
| Reinforced Cement Concrete M-20 design mix Concrete corresponding to IS 456 using Concrete Mixer with 20mm down size (65% of 20-10mm & 35% of 10-4.75mm) graded Crushed Granite metal from approved quarry including cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing and vibrating with mechanical vibrators, finishing, and centering/ shuttering charges, etc, (but excluding cost of steel reinforcement and its fabrication charges and Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) for Column Footings. Cement @ 350Kg/Cum of concrete is to be used |
| 73 | Construction of Project Office and vehicle shed | 6.0 | 105.00 | Cum | 3089.96 | 324445.80 |
| Cement Concrete 1:3:6 with 40mm down size (50% of 40-20mm, 30% of 20-10mm and 20% of 10-4.75mm) graded Crushed Granite metal of approved hard quality including machine mixing, vibrating, necessary Centering, shuttering charges etc., Complete for finished Item of work as directed for Side Walls of Drains or Basement/ Substructure of the Buildings (Excluding Cost of Cement) (CA : 0.90 Cum, FA:0.45Cum) |
| 74 | Construction of Project Office and vehicle shed | 5.0 | 98.00 | Cum | 2876.96 | 281942.08 |
| Cement Concrete 1:4:8 with 40 mm size Crushed granite metal of approved hard quality in foundations or Plinths etc., Complete (But Excluding Cost of Cement) - with concrete mixer |
| 75 | Construction of Project Office and vehicle shed | 4.0 | 420.00 | Cum | 24.70 | 10374.00 |
| Filling with excavated earth (excluding rock)/ Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) (Excluding cost of sand) |
| 76 | Construction of Project Office and vehicle shed | 3.0 | 300.00 | cum | 31.50 | 9450.00 |
| Conveyance charges of Earth - Lead Upto 1 KM. Note:- 1). Loading charges to be applied for manual loading only. 2). Unloading/ stacking charges need not be paid for this material. |
| 77 | Construction of Project Office and vehicle shed | 2.0 | 480.00 | Cum | 97.50 | 46800.00 |
| Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308). - Ordinary soils-Mechanical Means-Up to 3 m depth |
| 78 | Construction of Project Office and vehicle shed | 1.0 | 120.00 | Cum | 173.70 | 20844.00 |
| Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308). - Ordinary Soil-Manual Means-Up to 3 m depth |
