Improvement Of 570 ( Red ) Mig Bps By Replacement Of ( Enm ) Equipments Etc . In Ac-27 ., C-2A Block Janakpuri BPS New Delhi-Delhi

Improvement Of 570 ( Red ) Mig Bps By Replacement Of ( Enm ) Equipments Etc. In Ac-27:-1.01 Supply Of Horizontal Split Casing Pump Of Head: 42 Mtr, Discharge: 50 Lps ( Approx ) , 1475 Rpm With Impeller & Neckring ( Ci ) , Casing ( Ci ) , Shaft & Sleeve ( In Standard Construction ) In Fitted Condition Suitable For 40 Hp Motor With Suitable Bearings And Other Parts. Make: Kirloskar / Mather & Platt / Jyoti / Djb Approved Make. 1.02 Supply Of Suitable Coupling-Set And Coupling Guard For Above Pump-Set. 1.03 Supply Of Suitable M.S. Base Frame For Above Pump-Set. 1.04 Supply Of Ms Bend Heavy Duty Of Size 150 Mm Dia. 90* With Double Flange. 1.05 Supply Of Ms Bend Heavy Duty Of Size 125 Mm Dia. 90* With Double Flange. 1.06 Supply Of M.S. Flange Of 150 Mm Dia. 1.07 Supply Of M.S. Flange Of 125 Mm Dia. 1.08 Supply Of Nut Bolts & Washers. 1.09 Supply Of Neoprene Rubber Packing Sheet. 1.1 Supply Of Ms Reducer Heavy Duty Of Size 125 X 100 Mm Dia. With Double Flange. 1.11 S / O Ms Tee Heavy Duty Of Size 125 X 125 X 125 Mm Dia. 1.12 S / O Ms Pipe Confirming To Is:1239 Part-I, Medium 150 Mm Diameter. Make: Jindal / Tata. 1.13 S / O Ms Pipe Confirming To Is: 1239 Part-I, Medium 125 Mm Diameter. Make: Jindal / Tata. 1.14 Supply Of C.I.D. / F Non-Rising With Ss Spindle Sluice Valve, Pn 1.0, C.I. Body / Wedge / Bronze-Rings / Ss / 410 Shaft Construction Of 150 Mm Size. Make:- Kirloskar / Ivc. 1.15 Supply Of C.I.D. / F Non-Rising With Ss Spindle Sluice Valve, Pn 1.0, C.I. Body / Wedge / Bronze-Rings / Ss / 410 Shaft Construction Of 125 Mm Size. Make:- Kirloskar / Ivc. 1.16 Supply Of C.I.D. / F Swing Type Non-Return Valve, Pn 1.0, C.I. Body / Door / Bronze To Rubber Rings / Ss / 410 Hinge Pin Construction Of 125 Mm Size. Make:- Kirloskar / Ivc. 1.17 Dismantling Of Existing Pumps & Motors From The M.S Base Frame Valves, Bends, Pipes Etc. Of Both Side ( Suction & Delivery Side ) By Doing All Such Work As Per Site Requirement & Taking Out All The Equipments From The Base Frame / Foundation. 1.18 Breaking Of The Existing Rcc Foundation & Dismantling The Existing M.S. Base Frame And Making Of Rcc Foundation By Cement Concrete, M.S. Jal Etc. And Fixing Of Above M.S. Base Frame With Foundation Nut-Bolts Of Suibable Size Etc. As Per Pump-Set & Site Requirement. 1.19 Breaking Of Existing Damaged Floor And Removing The Dust, Soil Etc. Providing And Fixing At Or Near Ground Level Precast Cement Concrete Flooring 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, Plastering Of Floor 1.2 Installation And Fitting Of Pumps & Motors ( Motor Will Be Provided By The Deptt. ) On The Base-Frame / Foundation And Coupled The Pump-Set. The Job Also Includes Installation & Fixing Of Valves, Pipes, Bends, Reducers, Flanges Etc. Of Both Side ( Suction & Delivery Side ) Including Primer & Paint On Complete Equipments As Per The Site Requirement & Proper Alignment Of Pump-Sets After Taking All Safety Precaution Arrangements, All Tools & Tackles Etc.

INR 500 /-

INR 15600.0 /-

Refer document