Special Repairs , Works To The Existing Sub Centre Buildings , Construction Of Yoga Shed And Separate Room For Bio Medical Waste Bin In The Sub Centre At Manamedu In Bahour Commune , Puducherry Ii Call

Tender Notice

23597366
Special Repairs , Works To The Existing Sub Centre Buildings , Construction Of Yoga Shed And Separate Room For Bio Medical Waste Bin In The Sub Centre At Manamedu In Bahour Commune , Puducherry Ii Call
Indian
Puducherry
13-02-2020
19-02-2020
20-02-2020

Tender Details

Special Repairs , Works To The Existing Sub Centre Buildings , Construction Of Yoga Shed And Separate Room For Bio Medical Waste Bin In The Sub Centre At Manamedu In Bahour Commune , Puducherry Ii Call

Key Value

Document Fees
INR 525 /-
EMD
INR 9159.00 /-
Tender Value
INR 4.57 Lakhs /-

BOQ Items

Name of Work:Special repairs, works to the existing Sub Centre buildings, construction of Yoga shed and separate room for Bio Medical waste bin in the Sub Centre at Manamedu in Bahour Commune, Puducherry II Call
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as ell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge 2.6.1 8 Cum
2 2 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 2.27 5 Cum
3 3 Supplying and filling with gravel (excluding rock ) in trenches, plinth, sides of foundations etc.in layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering etc.complete including all lead and lift.\n 2.27A.1 6 Cum
4 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level - 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 4.1.3 1 Cum
5 5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) 4.1.10 4.5 Cum
6 6 Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns - Using steel sheet with MS frames 4.3.1 11 Sqm
7 7 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) 5.1.2 2 Cum
8 8 Brick work with FPS bricks of class designation 35 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) 6.1.1 1 Cum
9 9 Brick work with FPS bricks of class designation 35 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) 6.1.2 9.5 Cum
10 10 Half brick masonry with F.P.S. bricks of class designation 35 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand). 6.12.2 10.5 sqm
11 11 Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position - Padak wood 9.1.2P 0.04 Cum
12 12 Providing and fixing panelled or panelled and glazed shutters for doors , windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding panelling which will be paid for separately. - Vengai wood - 35mm thick shutters. 9.5.1.1V 5 Sqm
13 13 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick: Vengai wood 9.7.1V 5 Sqm
14 14 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete - 300x16 mm 9.96.1 3 Nos
15 15 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete - 250x10 mm 9.97.2 2 Nos
16 16 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete - 150x10 mm 9.97.4 20 Nos
17 17 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete - 100 mm 9.100.2 9 Nos
18 18 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge. 9.12 9 metre
19 19 Providing and fixing to existing door frames - 30mm thick factory made solid both side prelam panel PVC door shutter consisting of frame made out of M.S.tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, top & bottom rails.M.S.frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded prelam PVC 'C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick , 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, button and lock rails shall be provided either side of the panel. 10mm (5mmx2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5mm thick both side prelam PVC sheet to be fitted in the M.S.frame welded / sealed to the stiles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side , and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C channel using PVC solvent adhesive etc.complete manufactures specification & drawing 9.120.2 3 Sqm
20 20 Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer. 10.4 3 sqm
21 21 Steel work in built up tubular trusses etc., ncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. 10.16.1 997.68 kg
22 22 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 10.25.2 50 kg
23 23 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 11.3.1 15 sqm
24 24 Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make (Jhonson / Asian / Somany / Nitco) in all colours,shades of size 200 x 300 mm as approved in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. Including pointing in white cement mixed with pigment of matching shade complete. - size 200x300mm 11.36A 10 sqm
25 25 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. \n 11.37 2.5 sqm
26 26 Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% intergral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete 12.2 14 sqm
27 27 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter 12.41.2 40 Mts
28 28 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5 deg. - 110 mm bend 12.42.5.2 6 Nos
29 29 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion - 110 mm Shoe 12.42.6.2 6 Nos.
30 30 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete - 110 mm 12.43.2 24 Nos.
31 31 Supply and installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved) 0.50mm +/- 5% total coated thickness (TCT) thick Zinc coating 120 gsm as per IS:277 in 240 mpa steel grade , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns mimimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55mm) with EPDM seal or with polymer coated J or L hooks , bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required. 12.5 28 Sqm
32 32 12mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand) 13.1.1 17 Sqm
33 33 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) 13.2.1 30 Sqm
34 34 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm 13.48.1 33 Sqm
35 35 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work. 13.61.1 39 Sqm
36 36 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge - With cement mortar 1:4 (1 cement : 4 fine sand) 14.1.1 10 Sqm
37 37 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/e disposal of mulba/ rubbish to the nearest municipal dumping ground, For door/ window/ clerestory window 14.4.1 7 Sqm
38 38 Wall painting with plastic emulsion paint - Commercial of approved brand and manufacture to give an even shade - One or more coats on old work 14.53.1C 238 Sqm
39 39 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work 14.54.1 220 Sqm
40 40 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade. 16.70.2 20 Sqm
41 41 Supplying fixing and commisioning of Suguna/ Texmo /Sharp 1 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc. complete . 16.95 1 Nos
42 42 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required - W.C. pan with ISI marked black solid plastic seat and lid 17.3.2 1 Nos
43 43 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require - White Vitreous China Flat back wash basin size 450x300 mm with single 15mm C.P. brass pillar tap 17.7.7 1 Nos
44 44 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete - 10 litre (full flush) capacity-coloured 17.19.2 1 Nos
45 45 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete - flexible pipe - 40 mm dia 17.28.2.2 3 Nos
46 46 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing - Rectangular shape 453x357 mm 17.32.2 2 Nos
47 47 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 25mm nominal outer dia pipes 18.9.2 41 Mts.
48 48 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) - 25 mm nominal bore 18.17.1 3 Nos
49 49 Providing and fixing ball valve (brass) of approved quality complete High or low pressure, with plastic floats complete - 15 mm nominal bore 18.18.1.1 1 Nos
50 50 Providing and fixing uplasticised PVC connection pipe with brass unions - 45cm length - 20 mm nominal bore 18.21.2.2 3 Nos
51 51 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.48 500 Lts
52 52 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 - 15mm nominal bore 18.53.1 3 Nos
53 53 Providing, laying and jointing UPVC pipes(Finolex/Jain) (0.4 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia. 31.162.1B 20 Mts
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail